| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1238299172.4250.116.camel@haakon2.linux-iscsi.org>
Date: Sat, 28 Mar 2009 20:59:32 -0700
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: LKML <linux-kernel@...r.kernel.org>,
linux-scsi <linux-scsi@...r.kernel.org>
Cc: Brad Fennell <wavebender@...mail.com>,
Jason Hodges <jasonahodges@...il.com>,
Rafiu Fakunle <rafiu@...nfiler.com>
Subject: Subject: [PATCH] [Target_Core_Mod]: Add EVPD 0x83 NAA Registered
Extended Assigned identifer support
Greetings all,
This patch adds emulation for EVPD 0x83 NAA identifier type (0x3) Registered
Extended Assigned format (0x6) from spc4r17 section 7.7.3.6.5. The WWN value
is based on the emulated Unit Serial Number supplied via ConfigFS into
/sys/kernel/config/target/core/$HBA/$DEV/wwn/evpd_unit_serial for a
given storage object.
This patch expects evpd_unit_serial to be in hex. The first 24 bytes of
evpd_unit_serial is then encoded in binary hex starting at the
VENDOR_SPECIFIC_IDENTIFIER (36-bit) and VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
(64-bit) fields of the NAA identifier.
This patch also uses the OpenFabrics OUI (001405) for the IEEE Company ID
field of the NAA identifier. Note that the NAA (0x3) identifer is a requirement
for logical unit WWN on certain iSCSI capable cluster clients.
These patches are made against lio-core-2.6.git/master and tested on
v2.6.29 x86 32-bit HVM using sg_inq from sg3_utils. The lio-core-2.6.git tree
can be found at:
http://git.kernel.org/?p=linux/kernel/git/nab/lio-core-2.6.git;a=summary
Here is what it looks like:
*) Set WWN value to target_core_mod/IBLOCK exported Linux LVM blockdevice
echo a97e4ce21c0711de829b000c2943d57b > $TARGET/iblock_0/lvm_test0/wwn/evpd_unit_serial
*) From target_core_mod side kernel buffer
IBLOCK: Created bio_set() for major/minor: 254:2
iblock: Using SPC3_PERSISTENT_RESERVATIONS emulation
iblock: Enabling ALUA Emulation for SPC-3 device
iblock: Adding to default ALUA LU Group: core/alua/lu_gps/default_lu_gp
CORE_iBLOCK[0] - Activating Device with TCQ: 0 at Major: 254 Minor 2
Vendor: LIO-ORG Model: IBLOCK Revision: 3.0
Type: Direct-Access ANSI SCSI revision: 05
T10 EVPD Unit Serial Number: a97e4ce21c0711de829b000c2943d57b
T10 EVPD Page Length: 72
T10 EVPD Identifer Length: 16
T10 EVPD Identifier Association: addressed logical unit
T10 EVPD Identifier Type: NAA
T10 EVPD Binary Device Identifier: 36001405a97e4ce21c0711de829b000c2
*) From Open/iSCSI initiator side using sg_inq
initiator#~# sg_inq -p 0x83 -v /dev/sde
VPD INQUIRY: Device Identification page
inquiry cdb: 12 01 83 00 fc 00
Designation descriptor number 1, descriptor length: 20
id_type: NAA, code_set: Binary
associated with the addressed logical unit
NAA 6, IEEE Company_id: 0x1405
Vendor Specific Identifier: 0xa97e4ce21
Vendor Specific Identifier Extension: 0xc0711de829b000c2
[0x6001405a97e4ce21c0711de829b000c2]
Designation descriptor number 2, descriptor length: 52
id_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
vendor id: LIO-ORG
vendor specific: IBLOCK:a97e4ce21c0711de829b000c2943d57b
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
id_type: Relative target port, code_set: Binary
associated with the target port
Relative target port: 0x2
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
id_type: Target port group, code_set: Binary
associated with the target port
Target port group: 0x0
Designation descriptor number 5, descriptor length: 8
id_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
Logical unit group: 0x0
Designation descriptor number 6, descriptor length: 72
transport: Internet SCSI (iSCSI)
id_type: SCSI name string, code_set: UTF-8
associated with the target port
SCSI name string:
iqn.2003-01.org.linux-iscsi.target.i686:sn.cff3eedbd2fd,t,0x0001
Signed-off-by: Nicholas A. Bellinger <nab@...ux-iscsi.org>
---
drivers/lio-core/target_core_transport.c | 117 +++++++++++++++++++++++++-----
1 files changed, 100 insertions(+), 17 deletions(-)
diff --git a/drivers/lio-core/target_core_transport.c b/drivers/lio-core/target_core_transport.c
index 4132da1..e8879a9 100644
--- a/drivers/lio-core/target_core_transport.c
+++ b/drivers/lio-core/target_core_transport.c
@@ -4142,6 +4142,33 @@ static inline void transport_get_maps(se_cmd_t *cmd)
cmd->transport_unmap_SG_segments = &transport_generic_unmap_SG_segments;
}
+static unsigned char asciihex_to_binaryhex(unsigned char val[2])
+{
+ unsigned char result = 0;
+ /*
+ * MSB
+ */
+ if ((val[0] >= 'a') && (val[0] <= 'f'))
+ result = ((val[0] - 'a' + 10) & 0xf) << 4;
+ else
+ if ((val[0] >= 'A') && (val[0] <= 'F'))
+ result = ((val[0] - 'A' + 10) & 0xf) << 4;
+ else /* digit */
+ result = ((val[0] - '0') & 0xf) << 4;
+ /*
+ * LSB
+ */
+ if ((val[1] >= 'a') && (val[1] <= 'f'))
+ result |= ((val[1] - 'a' + 10) & 0xf);
+ else
+ if ((val[1] >= 'A') && (val[1] <= 'F'))
+ result |= ((val[1] - 'A' + 10) & 0xf);
+ else /* digit */
+ result |= ((val[1] - '0') & 0xf);
+
+ return result;
+}
+
extern int transport_generic_emulate_inquiry(
se_cmd_t *cmd,
unsigned char type,
@@ -4157,10 +4184,11 @@ extern int transport_generic_emulate_inquiry(
t10_alua_tg_pt_gp_member_t *tg_pt_gp_mem;
unsigned char *buf = (unsigned char *) T_TASK(cmd)->t_task_buf;
unsigned char *cdb = T_TASK(cmd)->t_task_cdb;
- unsigned char *iqn_sn;
+ unsigned char *iqn_sn, binary, binary_new;
u32 prod_len, iqn_sn_len, se_location_len;
u32 unit_serial_len, off = 0;
- u16 len = 0;
+ int i;
+ u16 len = 0, id_len;
/*
* Make sure we at least have 8 bytes of INQUIRY response payload
@@ -4256,10 +4284,61 @@ extern int transport_generic_emulate_inquiry(
* DESIGNATOR TYPEs see spc4r17 Table 459.
*/
buf[1] = 0x83;
+ off = 4;
+ /*
+ * NAA IEEE Registered Extended Assigned designator format,
+ * see spc4r17 section 7.7.3.6.5
+ *
+ * We depend upon a target_core_mod/ConfigFS provided
+ * /sys/kernel/config/target/core/$HBA/$DEV/wwn/evpd_unit_serial
+ * value in order to return the NAA id.
+ */
+ if (!(dev->se_sub_dev->su_dev_flags &
+ SDF_EMULATED_EVPD_UNIT_SERIAL))
+ goto check_t10_vend_desc;
+ if ((off + 20) > cmd->data_length)
+ goto check_t10_vend_desc;
+ /* CODE SET == Binary */
+ buf[off++] = 0x1;
+ /* Set ASSOICATION == addressed logical unit: 0)b */
+ buf[off] = 0x00;
+ /* Identifier/Designator type == NAA identifier */
+ buf[off++] = 0x3;
+ off++;
+ /* Identifier/Designator length */
+ buf[off++] = 0x10;
+ /*
+ * Start NAA IEEE Registered Extended Identifier/Designator
+ */
+ buf[off++] = (0x6 << 4);
+ /*
+ * Use OpenFabrics IEEE Company ID: 00 14 05
+ */
+ buf[off++] = 0x01;
+ buf[off++] = 0x40;
+ buf[off] = (0x5 << 4);
+ /*
+ * Return ConfigFS Unit Serial Number information for
+ * VENDOR_SPECIFIC_IDENTIFIER and
+ * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
+ */
+ binary = asciihex_to_binaryhex(
+ &DEV_T10_WWN(dev)->unit_serial[0]);
+ buf[off++] |= (binary & 0xf0) >> 4;
+ for (i = 0; i < 24; i += 2) {
+ binary_new = asciihex_to_binaryhex(
+ &DEV_T10_WWN(dev)->unit_serial[i+2]);
+ buf[off] = (binary & 0x0f) << 4;
+ buf[off++] |= (binary_new & 0xf0) >> 4;
+ binary = binary_new;
+ }
+ len = 20;
+ off = (len + 4);
+check_t10_vend_desc:
/*
* T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4
*/
- len += 8; /* For Vendor field */
+ id_len = 8; /* For Vendor field */
prod_len = 4; /* For EVPD Header */
prod_len += 8; /* For Vendor field */
prod_len += strlen(prod);
@@ -4271,12 +4350,14 @@ extern int transport_generic_emulate_inquiry(
strlen(&DEV_T10_WWN(dev)->unit_serial[0]);
unit_serial_len++; /* For NULL Terminator */
- if (((len + 4) + (prod_len + unit_serial_len)) >
+ if ((len + (id_len + 4) +
+ (prod_len + unit_serial_len)) >
cmd->data_length) {
len += (prod_len + unit_serial_len);
goto check_port;
}
- len += sprintf((unsigned char *)&buf[16], "%s:%s", prod,
+ id_len += sprintf((unsigned char *)&buf[off+12],
+ "%s:%s", prod,
&DEV_T10_WWN(dev)->unit_serial[0]);
} else {
iqn_sn = transport_get_iqn_sn();
@@ -4285,24 +4366,26 @@ extern int transport_generic_emulate_inquiry(
se_location_len = strlen(se_location);
se_location_len++; /* For NULL Terminator */
- if (((len + 4) + (prod_len + iqn_sn_len +
+ if ((len + (id_len + 4) + (prod_len + iqn_sn_len +
se_location_len)) > cmd->data_length) {
len += (prod_len + iqn_sn_len +
se_location_len);
goto check_port;
}
- len += sprintf((unsigned char *)&buf[16], "%s:%s:%s",
- prod, iqn_sn, se_location);
+ id_len += sprintf((unsigned char *)&buf[off+12],
+ "%s:%s:%s", prod, iqn_sn, se_location);
}
- buf[4] = 0x2; /* ASCII */
- buf[5] = 0x1; /* T10 Vendor ID */
- buf[6] = 0x0;
- memcpy((unsigned char *)&buf[8], "LIO-ORG", 8);
-
- len++; /* Extra Byte for NULL Terminator */
- buf[7] = len; /* Identifier Length */
- len += 4; /* Header size for Designation descriptor */
- off = (len + 4);
+ buf[off] = 0x2; /* ASCII */
+ buf[off+1] = 0x1; /* T10 Vendor ID */
+ buf[off+2] = 0x0;
+ memcpy((unsigned char *)&buf[off+4], "LIO-ORG", 8);
+ /* Extra Byte for NULL Terminator */
+ id_len++;
+ /* Identifier Length */
+ buf[off+3] = id_len;
+ /* Header size for Designation descriptor */
+ len += (id_len + 4);
+ off += (id_len + 4);
/*
* se_port_t is only set for INQUIRY EVPD=1 through $FABRIC_MOD
*/
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists