| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1238654959.4940.12.camel@ht.satnam>
Date: Thu, 02 Apr 2009 12:19:19 +0530
From: Jaswinder Singh Rajput <jaswinder@...nel.org>
To: James Bottomley <James.Bottomley@...senPartnership.com>
Cc: scsi <linux-scsi@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, Jes Sorensen <jes@....com>,
David Woodhouse <dwmw2@...radead.org>
Subject: Re: [PATCH 1/2 scsi-misc] qla1280: use request_firmware
On Thu, 2009-04-02 at 12:05 +0530, Jaswinder Singh Rajput wrote:
> Firmware blob is little endian looks like this...
> unsigned char Version1
> unsigned char Version2
> unsigned char Version3
> unsigned char Padding
> unsigned short start_address
> unsigned short data
>
> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@...il.com>
It seems LKML is rejected old email because of big size. so I am CC LKML
after deleting firmware blobs:
From: Jaswinder Singh Rajput <jaswinderrajput@...il.com>
Date: Thu, 2 Apr 2009 11:13:17 +0530
Subject: [PATCH] qla1280: use request_firmware
Firmware blob is little endian looks like this...
unsigned char Version1
unsigned char Version2
unsigned char Version3
unsigned char Padding
unsigned short start_address
unsigned short data
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@...il.com>
---
drivers/scsi/ql1040_fw.h | 2130 ----------------------------------------
drivers/scsi/ql12160_fw.h | 1811 ----------------------------------
drivers/scsi/ql1280_fw.h | 2048 --------------------------------------
drivers/scsi/qla1280.c | 114 ++-
drivers/scsi/qla1280.h | 6 +
firmware/Makefile | 2 +
firmware/WHENCE | 13 +
firmware/qlogic/1040.bin.ihex | 2111 +++++++++++++++++++++++++++++++++++++++
firmware/qlogic/12160.bin.ihex | 1771 +++++++++++++++++++++++++++++++++
firmware/qlogic/1280.bin.ihex | 2008 +++++++++++++++++++++++++++++++++++++
10 files changed, 5985 insertions(+), 6029 deletions(-)
delete mode 100644 drivers/scsi/ql1040_fw.h
delete mode 100644 drivers/scsi/ql12160_fw.h
delete mode 100644 drivers/scsi/ql1280_fw.h
create mode 100644 firmware/qlogic/1040.bin.ihex
create mode 100644 firmware/qlogic/12160.bin.ihex
create mode 100644 firmware/qlogic/1280.bin.ihex
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index df09820..351b56c 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -348,6 +348,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -384,11 +385,7 @@
#define MEMORY_MAPPED_IO 1
#endif
-#define UNIQUE_FW_NAME
#include "qla1280.h"
-#include "ql12160_fw.h" /* ISP RISC codes */
-#include "ql1280_fw.h"
-#include "ql1040_fw.h"
#ifndef BITS_PER_LONG
#error "BITS_PER_LONG not defined!"
@@ -541,10 +538,7 @@ __setup("qla1280=", qla1280_setup);
struct qla_boards {
unsigned char name[9]; /* Board ID String */
int numPorts; /* Number of SCSI ports */
- unsigned short *fwcode; /* pointer to FW array */
- unsigned short *fwlen; /* number of words in array */
- unsigned short *fwstart; /* start address for F/W */
- unsigned char *fwver; /* Ptr to F/W version array */
+ char *fwname; /* firmware name */
};
/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@@ -567,19 +561,13 @@ MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
static struct qla_boards ql1280_board_tbl[] = {
/* Name , Number of ports, FW details */
- {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
- &fw12160i_addr01, &fw12160i_version_str[0]},
- {"QLA1040", 1, &risc_code01[0], &risc_code_length01,
- &risc_code_addr01, &firmware_version[0]},
- {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
- &fw1280ei_addr01, &fw1280ei_version_str[0]},
- {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
- &fw1280ei_addr01, &fw1280ei_version_str[0]},
- {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
- &fw1280ei_addr01, &fw1280ei_version_str[0]},
- {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
- &fw12160i_addr01, &fw12160i_version_str[0]},
- {" ", 0}
+ {"QLA12160", 2, "qlogic/12160.bin"},
+ {"QLA1040", 1, "qlogic/1040.bin"},
+ {"QLA1080", 1, "qlogic/1280.bin"},
+ {"QLA1240", 2, "qlogic/1280.bin"},
+ {"QLA1280", 2, "qlogic/1280.bin"},
+ {"QLA10160", 1, "qlogic/12160.bin"},
+ {" ", 0, " "},
};
static int qla1280_verbose = 1;
@@ -704,7 +692,7 @@ qla1280_info(struct Scsi_Host *host)
sprintf (bp,
"QLogic %s PCI to SCSI Host Adapter\n"
" Firmware version: %2d.%02d.%02d, Driver version %s",
- &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
+ &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,
QLA1280_VERSION);
return bp;
}
@@ -1648,36 +1636,60 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
static int
qla1280_load_firmware_pio(struct scsi_qla_host *ha)
{
- uint16_t risc_address, *risc_code_address, risc_code_size;
+ const struct firmware *fw;
+ const __le16 *fw_data;
+ uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
int err;
+ err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
+ &ha->pdev->dev);
+ if (err) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ ql1280_board_tbl[ha->devnum].fwname, err);
+ return err;
+ }
+ if ((fw->size % 2) || (fw->size < 6)) {
+ printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+ fw->size, ql1280_board_tbl[ha->devnum].fwname);
+ err = -EINVAL;
+ goto out;
+ }
+ ha->fwver1 = fw->data[0];
+ ha->fwver2 = fw->data[1];
+ ha->fwver3 = fw->data[2];
+ fw_data = (const __le16 *)&fw->data[0];
+ ha->fwstart = __le16_to_cpu(fw_data[2]);
+
/* Load RISC code. */
- risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
- risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
- risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+ risc_address = ha->fwstart;
+ fw_data = (const __le16 *)&fw->data[4];
+ risc_code_size = (fw->size - 6) / 2;
for (i = 0; i < risc_code_size; i++) {
mb[0] = MBC_WRITE_RAM_WORD;
mb[1] = risc_address + i;
- mb[2] = risc_code_address[i];
+ mb[2] = __le16_to_cpu(fw_data[i]);
err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
ha->host_no);
- return err;
+ goto out;
}
}
-
- return 0;
+out:
+ release_firmware(fw);
+ return err;
}
#define DUMP_IT_BACK 0 /* for debug of RISC loading */
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
{
- uint16_t risc_address, *risc_code_address, risc_code_size;
+ const struct firmware *fw;
+ const __le16 *fw_data;
+ uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
int err = 0, num, i;
#if DUMP_IT_BACK
@@ -1689,10 +1701,29 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
return -ENOMEM;
#endif
+ err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
+ &ha->pdev->dev);
+ if (err) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ ql1280_board_tbl[ha->devnum].fwname, err);
+ return err;
+ }
+ if ((fw->size % 2) || (fw->size < 6)) {
+ printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+ fw->size, ql1280_board_tbl[ha->devnum].fwname);
+ err = -EINVAL;
+ goto out;
+ }
+ ha->fwver1 = fw->data[0];
+ ha->fwver2 = fw->data[1];
+ ha->fwver3 = fw->data[2];
+ fw_data = (const __le16 *)&fw->data[0];
+ ha->fwstart = __le16_to_cpu(fw_data[2]);
+
/* Load RISC code. */
- risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
- risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
- risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+ risc_address = ha->fwstart;
+ fw_data = (const __le16 *)&fw->data[4];
+ risc_code_size = (fw->size - 6) / 2;
dprintk(1, "%s: DMA RISC code (%i) words\n",
__func__, risc_code_size);
@@ -1708,10 +1739,9 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
"%d,%d(0x%x)\n",
- risc_code_address, cnt, num, risc_address);
+ fw_data, cnt, num, risc_address);
for(i = 0; i < cnt; i++)
- ((__le16 *)ha->request_ring)[i] =
- cpu_to_le16(risc_code_address[i]);
+ ((__le16 *)ha->request_ring)[i] = fw_data[i];
mb[0] = MBC_LOAD_RAM;
mb[1] = risc_address;
@@ -1763,7 +1793,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#endif
risc_address += cnt;
risc_code_size = risc_code_size - cnt;
- risc_code_address = risc_code_address + cnt;
+ fw_data = fw_data + cnt;
num++;
}
@@ -1771,6 +1801,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#if DUMP_IT_BACK
pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
#endif
+ release_firmware(fw);
return err;
}
@@ -1786,7 +1817,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
/* Verify checksum of loaded RISC code. */
mb[0] = MBC_VERIFY_CHECKSUM;
/* mb[1] = ql12_risc_code_addr01; */
- mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+ mb[1] = ha->fwstart;
err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
if (err) {
printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
@@ -1796,7 +1827,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
/* Start firmware execution. */
dprintk(1, "%s: start firmware running.\n", __func__);
mb[0] = MBC_EXECUTE_FIRMWARE;
- mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+ mb[1] = ha->fwstart;
err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
@@ -4450,6 +4481,9 @@ module_exit(qla1280_exit);
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("qlogic/1040.bin");
+MODULE_FIRMWARE("qlogic/1280.bin");
+MODULE_FIRMWARE("qlogic/12160.bin");
MODULE_VERSION(QLA1280_VERSION);
/*
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index ff2c363..d7c44b8 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -1069,6 +1069,12 @@ struct scsi_qla_host {
struct nvram nvram;
int nvram_valid;
+
+ /* Firmware Info */
+ unsigned short fwstart; /* start address for F/W */
+ unsigned char fwver1; /* F/W version first char */
+ unsigned char fwver2; /* F/W version second char */
+ unsigned char fwver3; /* F/W version third char */
};
#endif /* _QLA1280_H */
diff --git a/firmware/Makefile b/firmware/Makefile
index c6af61b..d2ab866 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -39,6 +39,8 @@ fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
+ qlogic/12160.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 00b6e3c..77a2cf3 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -45,6 +45,19 @@ Found alsa-firmware package in hex form, with the following comment:
--------------------------------------------------------------------------
+Driver: SCSI_QLOGIC_1280 - Qlogic QLA 1240/1x80/1x160 SCSI support
+
+File: qlogic/1040.bin
+File: qlogic/1280.bin
+File: qlogic/12160.bin
+
+Licence: Allegedly GPLv2+, but no source visible. Marked:
+
+ QLOGIC LINUX SOFTWARE
+ QLogic ISP1280/ device driver for Linux 2.2.x and 2.4.x
+ Copyright (C) 2001 Qlogic Corporation (www.qlogic.com)
+
+--------------------------------------------------------------------------
Driver: smctr -- SMC ISA/MCA Token Ring adapter
File: tr_smctr.bin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists