| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1239112120-676-8-git-send-email-penberg@cs.helsinki.fi>
Date: Tue, 7 Apr 2009 16:48:35 +0300
From: Pekka Enberg <penberg@...helsinki.fi>
To: ming@...e.hu
Cc: penberg@...helsinki.fi, x86@...nel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 08/13] x86: unify native_init_IRQ() in irqinit_{32,64}.c
Impact: cleanup
Signed-off-by: Pekka Enberg <penberg@...helsinki.fi>
---
arch/x86/kernel/irqinit_32.c | 53 +++++++++++++++++----------
arch/x86/kernel/irqinit_64.c | 82 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 115 insertions(+), 20 deletions(-)
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 4488b71..a780de3 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -22,7 +22,7 @@
#include <asm/i8259.h>
#include <asm/traps.h>
-
+#ifdef CONFIG_X86_32
/*
* Note that on a 486, we don't want to do a SIGFPE on an irq13
* as the irq is unreliable, and exception 16 works correctly
@@ -52,6 +52,7 @@ static struct irqaction fpu_irq = {
.handler = math_error_irq,
.name = "fpu",
};
+#endif
/*
* IRQ2 is cascade interrupt to second interrupt controller
@@ -155,24 +156,6 @@ static void __init smp_intr_init(void)
#endif /* CONFIG_SMP */
}
-/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-static void __init x86_quirk_pre_intr_init(void)
-{
- if (x86_quirks->arch_pre_intr_init) {
- if (x86_quirks->arch_pre_intr_init())
- return;
- }
- init_ISA_irqs();
-}
-
static void __init apic_intr_init(void)
{
smp_intr_init();
@@ -195,12 +178,36 @@ static void __init apic_intr_init(void)
#endif
}
+#ifdef CONFIG_X86_32
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+ init_ISA_irqs();
+}
+#endif
+
void __init native_init_IRQ(void)
{
int i;
+#ifdef CONFIG_X86_32
/* Execute any quirks before the call gates are initialised: */
x86_quirk_pre_intr_init();
+#else
+ init_ISA_irqs();
+#endif
/*
* Cover the whole vector space, no vector can escape
@@ -208,9 +215,15 @@ void __init native_init_IRQ(void)
* 'special' SMP interrupts)
*/
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+#ifdef CONFIG_X86_32
/* SYSCALL_VECTOR was reserved in trap_init. */
if (i != SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+#else
+ /* IA32_SYSCALL_VECTOR was reserved in trap_init. */
+ if (i != IA32_SYSCALL_VECTOR)
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+#endif
}
apic_intr_init();
@@ -218,6 +231,7 @@ void __init native_init_IRQ(void)
if (!acpi_ioapic)
setup_irq(2, &irq2);
+#ifdef CONFIG_X86_32
/*
* Call quirks after call gates are initialised (usually add in
* the architecture specific gates):
@@ -232,4 +246,5 @@ void __init native_init_IRQ(void)
setup_irq(FPU_IRQ, &fpu_irq);
irq_ctx_init(smp_processor_id());
+#endif
}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 61c9a92..ed50e35 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -39,14 +39,46 @@
* (these are usually mapped into the 0x30-0xff vector range)
*/
+#ifdef CONFIG_X86_32
/*
- * IRQ2 is cascade interrupt to second interrupt controller
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+ outb(0, 0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)get_irq_regs()->ip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
*/
+static struct irqaction fpu_irq = {
+ .handler = math_error_irq,
+ .name = "fpu",
+};
+#endif
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
static struct irqaction irq2 = {
.handler = no_action,
.name = "cascade",
};
+
DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
[0 ... IRQ0_VECTOR - 1] = -1,
[IRQ0_VECTOR] = 0,
@@ -158,11 +190,36 @@ static void __init apic_intr_init(void)
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
}
+#ifdef CONFIG_X86_32
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+ init_ISA_irqs();
+}
+#endif
+
void __init native_init_IRQ(void)
{
int i;
+#ifdef CONFIG_X86_32
+ /* Execute any quirks before the call gates are initialised: */
+ x86_quirk_pre_intr_init();
+#else
init_ISA_irqs();
+#endif
/*
* Cover the whole vector space, no vector can escape
@@ -170,13 +227,36 @@ void __init native_init_IRQ(void)
* 'special' SMP interrupts)
*/
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+#ifdef CONFIG_X86_32
+ /* SYSCALL_VECTOR was reserved in trap_init. */
+ if (i != SYSCALL_VECTOR)
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+#else
/* IA32_SYSCALL_VECTOR was reserved in trap_init. */
if (i != IA32_SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+#endif
}
apic_intr_init();
if (!acpi_ioapic)
setup_irq(2, &irq2);
+
+#ifdef CONFIG_X86_32
+ /*
+ * Call quirks after call gates are initialised (usually add in
+ * the architecture specific gates):
+ */
+ x86_quirk_intr_init();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+#endif
}
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists