[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1239479479-2603-3-git-send-email-tytso@mit.edu>
Date: Sat, 11 Apr 2009 15:51:18 -0400
From: Theodore Ts'o <tytso@....edu>
To: Linux Kernel Developers List <linux-kernel@...r.kernel.org>
Cc: Theodore Ts'o <tytso@....edu>, Steven Rostedt <rostedt@...dmis.org>
Subject: [PATCH, RFC 2/3] tracing: Document the event tracing system
Signed-off-by: "Theodore Ts'o" <tytso@....edu>
Cc: Steven Rostedt <rostedt@...dmis.org>
---
Documentation/trace/events.txt | 132 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 132 insertions(+), 0 deletions(-)
create mode 100644 Documentation/trace/events.txt
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
new file mode 100644
index 0000000..a0490c8
--- /dev/null
+++ b/Documentation/trace/events.txt
@@ -0,0 +1,132 @@
+ Event Tracing
+
+ Documentation written by Theodore Ts'o
+
+Introduction
+============
+
+Tracepoints (see Documentation/tracing/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions using
+the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system; the
+kernel developer must provide code snippets which define how the tracing
+information is saved into the tracing buffer, and how the the tracing
+information should be printed.
+
+Using Event Tracing
+===================
+
+The events which are available for tracing can be found in the file
+/sys/kernel/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it to
+/sys/debug/tracing/set_event. For example:
+
+ # echo sched_wakeup > /sys/kernel/debug/tracing/set_event
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+ # echo '!sched_wakeup' >> /sys/kernel//debug/tracing/set_event
+
+To disable events, echo an empty line to the set_event file:
+
+ # echo > /sys/kernel/debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>. The
+subsystem name is optional, but it is displayed in the available_events
+file. All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+ # echo 'irq:*' > /sys/kernel/debug/tracing/set_event
+
+Defining an event-enabled tracepoint
+------------------------------------
+
+A kernel developer which wishes to define an event-enabled tracepoint
+must declare the tracepoint using TRACE_EVENT instead of DECLARE_TRACE.
+This is done via two header files in include/trace. For example, to
+event-enable the jbd2 subsystem, we must create two files,
+include/trace/jbd2.h and include/trace/jbd2_event_types.h. The
+include/trace/jbd2.h file should be included by kernel source files that
+will have a tracepoint inserted, and might look like this:
+
+#ifndef _TRACE_JBD2_H
+#define _TRACE_JBD2_H
+
+#include <linux/jbd2.h>
+#include <linux/tracepoint.h>
+
+#include <trace/jbd2_event_types.h>
+
+#endif
+
+In a file that utilizes a jbd2 tracepoint, this header file would be
+included. Note that you still have to use DEFINE_TRACE(). So for
+example, if fs/jbd2/commit.c planned to use the jbd2_start_commit
+tracepoint, it would have the following near the beginning of the file:
+
+#include <trace/jbd2.h>
+
+DEFINE_TRACE(jbd2_start_commit);
+
+Then in the function that would call the tracepoint, it would call the
+tracepoint function. (For more information, please see the tracepoint
+documentation in Documentation/trace/tracepoints.txt):
+
+ trace_jbd2_start_commit(journal, commit_transaction);
+
+The code snippets which allow jbd2_start_commit to be an event-enabled
+tracepoint are placed in the file include/trace/jbd2_event_types.h:
+
+/* use <trace/jbd2.h> instead */
+#ifndef TRACE_EVENT
+# error Do not include this file directly.
+# error Unless you know what you are doing.
+#endif
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
+#include <linux/jbd2.h>
+
+TRACE_EVENT(jbd2_start_commit,
+ TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+ TP_ARGS(journal, commit_transaction),
+ TP_STRUCT__entry(
+ __array( char, devname, BDEVNAME_SIZE+24 )
+ __field( int, transaction )
+ ),
+ TP_fast_assign(
+ memcpy(__entry->devname, journal->j_devname, BDEVNAME_SIZE+24);
+ __entry->transaction = commit_transaction->t_tid;
+ ),
+ TP_printk("dev %s transaction %d",
+ __entry->devname, __entry->transaction)
+);
+
+The TP_PROTO and TP_ARGS are unchanged from DECLARE_TRACE. The new
+arguments to TRACE_EVENT are TP_STRUCT__entry, TP_fast_assign, and
+TP_printk.
+
+TP_STRUCT__entry defines the data structure which will be stored in the
+trace buffer. Normally, fields in __entry will be arrays or simple
+types. It is possible to place data structures in __entry --- however,
+pointers in the data structure can not be trusted, since they will be
+accessed sometime later by TP_printk, and if the data structure contains
+fields that will not or cannot be used by TP_printk, this will waste
+space in the trace buffer. In general, data structures should be
+avoided, unless they do only contain non-pointer types and all of the
+fields will be used by TP_printk.
+
+TP_fast_assign defines the code snippet which saves information into the
+__entry data structure, using the passed-in arguments defined in
+TP_PROTO and TP_ARGS.
+
+Finally, TP_printk will print the __entry data structure. At the time
+when code snippet defined by TP_printk is executed, it will not have
+access to the TP_ARGS arguments; it can only use the information saved
+in the __entry data structure.
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists