Message-Id: <1239660512-25468-1-git-send-email-dan@embeddedalley.com>
Date:	Mon, 13 Apr 2009 18:08:32 -0400
From:	Dan Malek <dan@...eddedalley.com>
To:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Cc:	Paul Menage <menage@...gle.com>, Dan Malek <dan@...eddedalley.com>
Subject: [PATCH] Memory usage limit notification addition to memcg

This patch updates the Memory Controller cgroup to add
a configurable memory usage limit notification.  The feature
was presented at the April 2009 Embedded Linux Conference.

Signed-off-by: Dan Malek <dan@...eddedalley.com>
---
 Documentation/cgroups/mem_notify.txt |  129 +++++++++++++++++++++
 include/linux/memcontrol.h           |    7 +
 init/Kconfig                         |    9 ++
 mm/memcontrol.c                      |  207 ++++++++++++++++++++++++++++++++++
 4 files changed, 352 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/cgroups/mem_notify.txt

diff --git a/Documentation/cgroups/mem_notify.txt b/Documentation/cgroups/mem_notify.txt
new file mode 100644
index 0000000..72d5c26
--- /dev/null
+++ b/Documentation/cgroups/mem_notify.txt
@@ -0,0 +1,129 @@
+
+Memory Limit Notificiation
+
+Attempts have been made in the past to provide a mechanism for
+the notification to processes (task, an address space) when memory
+usage is approaching a high limit.  The intention is that it gives
+the application an opportunity to release some memory and continue
+operation rather than be OOM killed.  The CE Linux Forum requested
+a more comtemporary implementation, and this is the result.
+
+The memory limit notification is a configurable extension to the
+existing Memory Resource Controller.  Please read memory.txt in this
+directory to understand its operation before continuing here.
+
+1. Operation
+
+When a kernel is configured with CGROUP_MEM_NOTIFY, three additional
+files will appear in the memory resource controller:
+
+	memory.notify_limit_percent
+	memory.notify_limit_usage
+	memory.notify_limit_lowait
+
+The notification is based upon reaching a percentage of the memory
+resource controller limit (memory.limit_in_bytes).  When the controller
+group is created, the percentage is set to 100.  Any integer percentage
+may be set by writing to memory.notify_limit_percent, such as:
+
+	echo 80 > memory.notify_limit_percent
+
+The current integer usage percentage may be read at any time from
+the memory.notify_limit_usage file.
+
+The memory.notify_limit_lowait is a blocking read file.  The read will
+block until one of four conditions occurs:
+
+    - The usage reaches or exceeds the memory.notify_limit_percent
+    - The memory.notify_limit_lowait file is written with any value (debug)
+    - A thread is moved to another controller group
+    - The cgroup is destroyed or forced empty (memory.force_empty)
+
+
+1.1 Example Usage
+
+An application must be designed to properly take advantage of this
+memory limit notification feature.  It is a powerful management component
+of some operating systems and embedded devices that must provide
+highly available and reliable computing services.  The application works
+in conjunction with information provided by the operating system to
+control limited resource usage.  Since many programmers still think
+memory is infinite and never check the return value from malloc(), it
+may come as a surprise that such mechanisms have been utilized long ago.
+
+A typical application will be multithreaded, with one thread either
+polling or waiting for the notification event.  When the event occurs,
+the thread will take whatever action is appropriate within the application
+design.  This could be actually running a garbage collection algorithm
+or to simply signal other processing threads they must do something to
+reduce their memory usage.  The notification thread will then be required
+to poll the actual usage until the low limit of its choosing is met,
+at which time the reclaim of memory can stop and the notification thread
+will wait for the next event.
+
+Internally, the application only needs to fopen("memory.notify_limit_usage" ..)
+and fopen("memory.notify_limit_lowait" ...), then either poll the former
+file or block read on the latter file using fread() or fscanf() as desired.
+
+2. Configuration
+
+Follow the instructions in memory.txt for the configuration and usage of
+the Memory Resource Controller cgroup.  Once this is created and tasks
+assigned, use the memory limit notification as described here.
+
+The only action that is needed outside of the application waiting or polling
+is to set the memory.notify_limit_percent.  To set a notification to occur
+when memory usage of the cgroup reaches or exceeds 80 percent can be
+simply done:
+
+	echo 80 > memory.notify_limit_percent
+
+This value may be read or changed at any time.  Writing a lower value once
+the Memory Resource Controller is in operation may trigger immediate
+notification if the usage is above the new limit.
+
+3. Debug and Testing
+
+The design of cgroups makes it easier to perform some debugging or
+monitoring tasks without modification to the application.  For example,
+a write of any value to memory.notify_limit_lowait will wake up all
+threads waiting for notifications regardless of current memory usage.
+
+Collecting performance data about the cgroup is also simplified, as
+no application modifications are necessary.  A separate task can be
+created that will open and monitor any necessary files of the cgroup
+(such as current limits, usage and usage percentages and even when
+notification occurs).  This task can also operate outside of the cgroup,
+so its memory usage is not charged to the cgroup.
+
+4. Design
+
+The memory limit notification is a configurable extension to the
+existing Memory Resource Controller, which operates as described to
+track and manage the memory of the Control Group.  The Memory Resource
+Controller will still continue to reclaim memory under pressure
+of the limits, and may OOM kill tasks within the cgroup according to
+the OOM Killer configuration.
+
+The memory notification limit was chosen as a percentage of the
+memory in use so the cgroup paramaters may continue to be dynamically
+modified without the need to modify the notificaton parameters.
+Otherwise, the notification limit would have to also be computed
+and modified on any Memory Resource Controller operating parameter change.
+
+The cgroup file semantics are not well suited for this type of notificaton
+mechanism.  While applications may choose to simply poll the current
+usage at their convenience, it was also desired to have a notification
+event that would trigger when the usage attained the limit.  The
+blocking read() was chosen, as it is the only current useful method.
+This presented the problems of "out of band" notification, when you want
+to return some exceptional status other than reaching the notification
+limit.  In the cases listed above, the read() on the memory.notify_limit_lowait
+file will not block and return "0" for the percentage.  When this occurs,
+the thread must determine if the task has moved to a new cgroup or if
+the cgroup has been destroyed.  Due to the usage model of this cgroup,
+neither is likely to happen during normal operation of a product.
+
+Dan Malek <dan@...eddedalley.com>
+Embedded Alley Solutions, Inc.
+10 March 2009
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 18146c9..031e5d1 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -117,6 +117,13 @@ static inline bool mem_cgroup_disabled(void)
 
 extern bool mem_cgroup_oom_called(struct task_struct *task);
 
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+extern void test_and_wakeup_notify(struct mem_cgroup *mcg,
+				unsigned long long newlimit);
+extern unsigned long compute_usage_percent(unsigned long long usage,
+				unsigned long long limit);
+#endif
+
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct mem_cgroup;
 
diff --git a/init/Kconfig b/init/Kconfig
index f2f9b53..97138da 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -588,6 +588,15 @@ config CGROUP_MEM_RES_CTLR
 	  This config option also selects MM_OWNER config option, which
 	  could in turn add some fork/exit overhead.
 
+config CGROUP_MEM_NOTIFY
+	bool "Memory Usage Limit Notification"
+	depends on CGROUP_MEM_RES_CTLR
+	help
+	  Provides a memory notification when usage reaches a preset limit.
+	  It is an extenstion to the memory resource controller, since it
+	  uses the memory usage accounting of the cgroup to test against
+	  the notification limit.  (See Documentation/cgroups/mem_notify.txt)
+
 config CGROUP_MEM_RES_CTLR_SWAP
 	bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
 	depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2fc6d6c..d6367ed 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6,6 +6,10 @@
  * Copyright 2007 OpenVZ SWsoft Inc
  * Author: Pavel Emelianov <xemul@...nvz.org>
  *
+ * Memory Limit Notification update
+ * Copyright 2009 CE Linux Forum and Embedded Alley Solutions, Inc.
+ * Author: Dan Malek <dan@...eddedalley.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -180,6 +184,11 @@ struct mem_cgroup {
 	 * statistics. This must be placed at the end of memcg.
 	 */
 	struct mem_cgroup_stat stat;
+
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	unsigned long notify_limit_percent;
+	wait_queue_head_t notify_limit_wait;
+#endif
 };
 
 enum charge_type {
@@ -934,6 +943,21 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 
 	VM_BUG_ON(mem_cgroup_is_obsolete(mem));
 
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	/* We check on the way in so we don't have to duplicate code
+	 * in both the normal and error exit path.
+	 */
+	if (likely(mem->res.limit != (unsigned long long)LLONG_MAX)) {
+		unsigned long usage_pct;
+
+		usage_pct = compute_usage_percent(mem->res.usage + PAGE_SIZE,
+								mem->res.limit);
+		if ((usage_pct >= mem->notify_limit_percent) &&
+		    waitqueue_active(&mem->notify_limit_wait))
+			wake_up(&mem->notify_limit_wait);
+	}
+#endif
+
 	while (1) {
 		int ret;
 		bool noswap = false;
@@ -1663,6 +1687,13 @@ static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
 	int children = mem_cgroup_count_children(memcg);
 	u64 curusage, oldusage;
 
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	/* Test and notify ahead of the necessity to free pages, as
+	 * applications giving up pages may help this reclaim procedure.
+	 */
+	test_and_wakeup_notify(memcg, val);
+#endif
+
 	/*
 	 * For keeping hierarchical_reclaim simple, how long we should retry
 	 * is depends on callers. We set our retry-count to be function
@@ -2215,6 +2246,147 @@ static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
 	return 0;
 }
 
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+#define CGROUP_LOCAL_BUFFER_SIZE 64 /* Would be nice if this was in cgroup.h */
+
+/* The resource counters are defined as long long, but few processors
+ * handle 64-bit divisor in hardware, and the software to do it isn't
+ * present in the kernel.  It would be nice if the resource counters were
+ * platform specific configurable typedefs, but for now we'll just divide
+ * down the byte counters by the page size to get 32-bit arithmetic.
+ * With a 4K page size, this will work up to about 16384G resource limit.
+ */
+unsigned long compute_usage_percent(unsigned long long usage,
+					unsigned long long limit)
+{
+	unsigned long lim;
+	unsigned long long usage_pct;
+
+	usage_pct = (usage / PAGE_SIZE) * 100;
+	lim = (unsigned long)(limit / PAGE_SIZE);
+
+	do_div(usage_pct, lim);
+
+	return (unsigned long)usage_pct;
+}
+
+void test_and_wakeup_notify(struct mem_cgroup *mcg, unsigned long long newlimit)
+{
+	unsigned long usage_pct;
+
+	/* Check to see if the new limit should cause notification.
+	*/
+	usage_pct = compute_usage_percent(mcg->res.usage, newlimit);
+
+	if ((usage_pct >= mcg->notify_limit_percent) &&
+	    waitqueue_active(&mcg->notify_limit_wait))
+		wake_up(&mcg->notify_limit_wait);
+}
+
+static ssize_t notify_limit_read(struct cgroup *cgrp, struct cftype *cft,
+			       struct file *file,
+			       char __user *buf, size_t nbytes,
+			       loff_t *ppos)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
+	int len;
+
+	len = sprintf(tmp, "%lu\n", memcg->notify_limit_percent);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, tmp, len);
+}
+
+static int notify_limit_write(struct cgroup *cgrp, struct cftype *cft,
+			    const char *buffer)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	unsigned long val;
+	char *endptr;
+
+	val = simple_strtoul(buffer, &endptr, 0);
+	if (val > 100)
+		return -EINVAL;
+
+	memcg->notify_limit_percent = val;
+
+	/* Check to see if the new percentage limit should cause notification.
+	*/
+	test_and_wakeup_notify(memcg, memcg->res.limit);
+
+	return 0;
+}
+
+static ssize_t notify_limit_usage_read(struct cgroup *cgrp, struct cftype *cft,
+			       struct file *file,
+			       char __user *buf, size_t nbytes,
+			       loff_t *ppos)
+{
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
+	unsigned long usage_pct;
+	int len;
+
+	usage_pct = compute_usage_percent(mem->res.usage, mem->res.limit);
+
+	len = sprintf(tmp, "%lu\n", usage_pct);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, tmp, len);
+}
+
+static ssize_t notify_limit_lowait(struct cgroup *cgrp, struct cftype *cft,
+			       struct file *file,
+			       char __user *buf, size_t nbytes,
+			       loff_t *ppos)
+{
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
+	unsigned long usage_pct;
+	int len;
+	DEFINE_WAIT(notify_lowait);
+
+	/* A memory resource usage of zero is a special case that
+	 * causes us not to sleep.  It normally happens when the
+	 * cgroup is about to be destroyed, and we don't want someone
+	 * trying to sleep on a queue that is about to go away.  This
+	 * condition can also be forced as part of testing.
+	 */
+	usage_pct = compute_usage_percent(mem->res.usage, mem->res.limit);
+	if (likely(mem->res.usage != 0)) {
+
+		prepare_to_wait(&mem->notify_limit_wait, &notify_lowait,
+							TASK_INTERRUPTIBLE);
+
+		if (usage_pct < mem->notify_limit_percent) {
+			schedule();
+
+			/* Compute percentage we have now and return it.
+			*/
+			usage_pct = compute_usage_percent(mem->res.usage,
+							mem->res.limit);
+		}
+		finish_wait(&mem->notify_limit_wait, &notify_lowait);
+	}
+
+	len = sprintf(tmp, "%lu\n", usage_pct);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, tmp, len);
+}
+
+/* This is used to wake up all threads that may be hanging
+ * out waiting for a low memory condition prior to that happening.
+ * Useful for triggering the event to assist with debug of applications.
+ */
+static int notify_limit_wake_em_up(struct cgroup *cgrp, unsigned int event)
+{
+	struct mem_cgroup *mem;
+
+	mem = mem_cgroup_from_cont(cgrp);
+	wake_up(&mem->notify_limit_wait);
+	return 0;
+}
+#endif /* CONFIG_CGROUP_MEM_NOTIFY */
+
 
 static struct cftype mem_cgroup_files[] = {
 	{
@@ -2258,6 +2430,22 @@ static struct cftype mem_cgroup_files[] = {
 		.read_u64 = mem_cgroup_swappiness_read,
 		.write_u64 = mem_cgroup_swappiness_write,
 	},
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	{
+		.name = "notify_limit_percent",
+		.write_string = notify_limit_write,
+		.read = notify_limit_read,
+	},
+	{
+		.name = "notify_limit_usage",
+		.read = notify_limit_usage_read,
+	},
+	{
+		.name = "notify_limit_lowait",
+		.trigger = notify_limit_wake_em_up,
+		.read = notify_limit_lowait,
+	},
+#endif
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -2461,6 +2649,11 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
 	mem->last_scanned_child = 0;
 	spin_lock_init(&mem->reclaim_param_lock);
 
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	init_waitqueue_head(&mem->notify_limit_wait);
+	mem->notify_limit_percent = 100;
+#endif
+
 	if (parent)
 		mem->swappiness = get_swappiness(parent);
 	atomic_set(&mem->refcnt, 1);
@@ -2504,6 +2697,20 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 				struct cgroup *old_cont,
 				struct task_struct *p)
 {
+#ifdef CONFIG_CGROUP_MEM_NOTIFY
+	/* We wake up all notification threads any time a migration takes
+	 * place.  They will have to check to see if a move is needed to
+	 * a new cgroup file to wait for notification.
+	 * This isn't so much a task move as it is an attach.  A thread not
+	 * a child of an existing task won't have a valid parent, which
+	 * is necessary to test because it won't have a valid mem_cgroup
+	 * either.  Which further means it won't have a proper wait queue
+	 * and we can't do a wakeup.
+	 */
+	if (old_cont->parent != NULL)
+		notify_limit_wake_em_up(old_cont, 0);
+#endif
+
 	mutex_lock(&memcg_tasklist);
 	/*
 	 * FIXME: It's better to move charges of this process from old
-- 
1.6.2.GIT

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists