| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1239759779.2567.817.camel@ymzhang>
Date: Wed, 15 Apr 2009 09:42:59 +0800
From: "Zhang, Yanmin" <yanmin_zhang@...ux.intel.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: Linux 2.6.30-rc2
On Tue, 2009-04-14 at 16:48 -0700, Linus Torvalds wrote:
> Hmm.
>
> New 'microblaze' architecture, a somewhat late 'input' layer merge, a new
> intel virtual networking driver and some firmware loading updates. And
> mn10300 and frv moved their header files from include/asm to arch. That
> accounts for the bulk, but shouldn't affect anybody.
>
> Otherwise? Some driver updates (ide, infiniband, sgi-xp, intel dri,
> watchdog). nilfs2 and xfs filesystem updates.
>
> And random small fixes. Not all as small as I'd wish for, but it's just
> early -rc2, and it at least feels less chaotic than some other -rc2's. But
> maybe that's my optimistic nature again.
>
> Shortlog appended, it might give people some flavor of the kinds of
> changes there were.
>
There are lots of conflictions when I apply it to 2.6.29.
Bleow are just some.
patching file arch/arm/configs/xm_x2xx_defconfig
Hunk #1 FAILED at 1.
Hunk #2 succeeded at 62 (offset -1 lines).
Hunk #3 FAILED at 70.
Hunk #4 FAILED at 84.
Hunk #5 FAILED at 139.
Hunk #6 FAILED at 218.
Hunk #7 succeeded at 302 (offset 11 lines).
Hunk #8 succeeded at 300 (offset -1 lines).
Hunk #9 FAILED at 330.
Hunk #10 FAILED at 369.
Hunk #11 FAILED at 401.
Hunk #12 FAILED at 412.
Hunk #13 FAILED at 433.
Hunk #14 FAILED at 450.
Hunk #15 FAILED at 481.
Hunk #16 FAILED at 531.
Hunk #17 succeeded at 574 (offset 27 lines).
Hunk #18 FAILED at 584.
patching file arch/sh/configs/sh7763rdp_defconfig
patching file arch/arm/configs/xm_x2xx_defconfig
Hunk #1 FAILED at 1.
Hunk #2 FAILED at 35.
Hunk #3 FAILED at 83.
Hunk #4 FAILED at 116.
Hunk #5 FAILED at 134.
Hunk #6 succeeded at 359 with fuzz 2 (offset 10 lines).
Hunk #7 FAILED at 384.
Hunk #8 FAILED at 398.
Hunk #9 FAILED at 408.
Hunk #10 FAILED at 419.
Hunk #11 FAILED at 442.
Hunk #12 FAILED at 473.
Hunk #13 FAILED at 486.
Hunk #14 FAILED at 518.
Hunk #15 FAILED at 546.
Hunk #16 FAILED at 588.
Hunk #17 FAILED at 605.
Hunk #18 FAILED at 639.
Hunk #19 FAILED at 665.
Hunk #20 FAILED at 673.
Hunk #21 FAILED at 704.
Hunk #22 FAILED at 718.
Hunk #23 succeeded at 792 with fuzz 1 (offset 24 lines).
Hunk #24 FAILED at 805.
Hunk #25 FAILED at 854.
Hunk #26 FAILED at 873.
Hunk #27 FAILED at 890.
Hunk #28 FAILED at 942.
patching file drivers/usb/storage/cypress_atacb.h
patching file drivers/usb/storage/unusual_isd200.h
patching file drivers/usb/storage/sddr55.h
Hunk #1 FAILED at 1.
Hunk #2 FAILED at 15.
2 out of 2 hunks FAILED -- saving rejects to file drivers/usb/storage/sddr55.h.rej
patching file drivers/usb/storage/isd200.h
patching file drivers/usb/storage/sddr55.h
Hunk #1 FAILED at 1.
Hunk #2 FAILED at 15.
2 out of 2 hunks FAILED -- saving rejects to file drivers/usb/storage/sddr55.h.rej
patching file drivers/usb/storage/unusual_sddr09.h
> Linus
>
> ---
> Adrian McMenamin (1):
> Input: add support for the Maple mouse on the SEGA Dreamcast
>
> Alan Cox (5):
> x86: DMI match for the Dell DXP061 as it needs BIOS reboot
> tty: MAX3100
> cdc-acm: Fix long standing abuse of tty->low_latency
> tty: Fix leak in ti-usb
> parport: Fix various uses of parport_pc
>
> Alasdair G Kergon (3):
> dm: rearrange dm_wq_work
> dm: split DMF_BLOCK_IO flag into two
> dm: simplify dm_request loop
>
> Alex Nixon (1):
> Xen: Add virt_to_pfn helper function
>
> Alex Riesen (1):
> netfilter: fix selection of "LED" target in netfilter
>
> Alexander Beregalov (1):
> befs: fix build on parisc
>
> Alexander Duyck (2):
> igbvf: add new driver to support 82576 virtual functions
> igb: remove sysfs entry that was used to set the number of vfs
>
> Alexey Dobriyan (1):
> aio: remove INIT_KIOCTX
>
> Andi Kleen (2):
> asm-generic/siginfo.h: update NSIGTRAP definition
> kernel/sys.c: clean up sys_shutdown exit path
>
> Andrea Righi (2):
> fbdev: fix info->lock deadlock in fbcon_event_notify()
> res_counter: update documentation
>
> Andrew Morton (2):
> work_on_cpu(): rewrite it to create a kernel thread on demand
> cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c
>
> Andy Grover (2):
> x86: Document get_user_pages_fast()
> mm: document get_user_pages_fast()
>
> Andy Whitcroft (1):
> Input: psmouse - add newline to OLPC HGPK touchpad debugging
>
> Atsushi Nemoto (3):
> tx4939ide: remove wmb()
> tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
> tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
>
> Balaji Rao (2):
> pcf50633_charger: Enable periodic charging restart
> pcf50633_charger: Remove unused mbc_set_status function
>
> Bartlomiej Zolnierkiewicz (3):
> ide-cd: convert cdrom_decode_status() to use switch statements
> ide-cd: unify handling of fs and pc requests in cdrom_decode_status()
> ide-cd: fix intendation in cdrom_decode_status()
>
> Bastian Blank (1):
> bnx2: Don't use reserved names
>
> Ben Gamari (1):
> drm/i915: Implement batch and ring buffer dumping
>
> Ben Hutchings (1):
> i2c: Fix sparse warnings for I2C_BOARD_INFO()
>
> Bharata B Rao (3):
> cpuacct: make cpuacct hierarchy walk in cpuacct_charge() safe when rcupreempt is used -v2
> cpuacct: add per-cgroup utime/stime statistics
> memcg: fix documentation
>
> Bjorn Helgaas (7):
> ACPI: thermal: use .notify method instead of installing handler directly
> ACPI: video: use .notify method instead of installing handler directly
> fujitsu-laptop: use .notify method instead of installing handler directly
> fujitsu-laptop: use .notify method instead of installing hotkey handler directly
> panasonic-laptop: use .notify method instead of installing handler directly
> sony-laptop: use .notify method instead of installing handler directly
> ACPI: WMI: use .notify method instead of installing handler directly
>
> Borislav Petkov (5):
> ide-cd: move status checking into the IRQ handler
> ide-cd: carve out an ide_cd_breathe()-helper for fs write requests
> ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
> ide-cd: update debugging support
> ide-cd: reverse NOT_READY sense key logic
>
> Chien Tung (3):
> RDMA/nes: Fix SFP+ PHY initialization
> RDMA/nes: Add wide_ppm_offset parm for switch compatibility
> RDMA/nes: Add support for new SFP+ PHY
>
> Dan Carpenter (1):
> niu: Fix error handling
>
> Daniel Mack (3):
> Input: generic driver for rotary encoders on GPIOs
> [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
> [ARM] pxa/colibri: get rid of set_irq_type()
>
> Daniel Mierswa (2):
> Input: atkbd - consolidate force release quirk setup
> Input: atkbd - add quirk for Fujitsu Siemens Amilo PA 1510
>
> Darren Hart (1):
> futex: comment requeue key reference semantics
>
> Dave Anderson (1):
> hfs: fix memory leak when unmounting
>
> Dave Chinner (9):
> xfs: validate log feature fields correctly
> xfs: fix double free of inode
> xfs: prevent unwritten extent conversion from blocking I/O completion
> xfs: inform the xfsaild of the push target before sleeping
> xfs: use xfs_sync_inodes() for device flushing
> xfs: make inode flush at ENOSPC synchronous
> xfs: block callers of xfs_flush_inodes() correctly
> xfs: flush delayed allcoation blocks on ENOSPC in create
> xfs: remove xfs_flush_space
>
> David Brownell (2):
> leds: just ignore invalid GPIOs in leds-gpio
> spi: spi_write_then_read() bugfixes
>
> David Howells (11):
> keys: Handle there being no fallback destination keyring for request_key()
> FRV: Use <asm-generic/pgtable.h> in NOMMU mode
> MN10300: Kill MN10300's own profiling Kconfig
> FRV: Fix indentation errors to keep git-am happy when moving arch header files
> FRV: Move to arch/frv/include/asm/
> Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
> Separate out the proc- and unit-specific header directories from the general MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations.
> kbuild: make it possible for the linker to discard local symbols from vmlinux
> mm: point the UNEVICTABLE_LRU config option at the documentation
> mm: reformat the Unevictable-LRU documentation
> Fix lpfc_parse_bg_err()'s use of do_div()
>
> David S. Miller (8):
> sparc64: get_cells() can't be marked __init
> sparc64: Fix section mismatch warnings in power driver.
> sparc64: Fix section mismatch warnings in PCI controller drivers.
> sparc: Fix section mismatch warnings in cs4231 sound driver.
> serial: sunsu: sunsu_kbd_ms_init needs to be __devinit
> sparc64: add_node_ranges() must be __init
> sparc: Hook up sys_preadv and sys_pwritev
> niu: Fix unused variable warning.
>
> David Woodhouse (8):
> Revert "fix modules_install via NFS"
> Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
> firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
> firmware: Remove newly-added slicoss and sxg firmware images
> Add README.AddingFirmware file. Basically telling people not to.
> x86, intel-iommu: fix X2APIC && !ACPI build failure
> qla1280: Fix off-by-some error in firmware loading.
> intel-iommu: Avoid panic() for DRHD at address zero.
>
> Dmitry Eremin-Solenikov (1):
> [ARM] pxa/csb701: do not register devices on non-csb726 boads
>
> Dmitry Torokhov (3):
> Input: fix polling of /proc/bus/input/devices
> Input: arrange drivers/input/misc/Makefile in alphabetical order
> Input: i8042 - add HP DV9700 to the noloop list
>
> Don Wood (1):
> RDMA/nes: Fix incorrect casts on 32-bit architectures
>
> Eric Anholt (2):
> drm/i915: Correctly set the write flag for get_user_pages in pread.
> drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU.
>
> Eric Dumazet (1):
> netfilter: ip6tables regression fix
>
> Eric Sandeen (1):
> include/linux/fiemap.h: include types.h now that it's exported
>
> Faisal Latif (2):
> RDMA/nes: Fix error handling issues
> RDMA/nes: Fix nes_nic_cm_xmit() error handling
>
> Fenghua Yu (1):
> Intel-IOMMU Alignment Issue in dma_pte_clear_range()
>
> Ferenc Wagner (1):
> drm/i915: indicate framebuffer restore key in SysRq help message
>
> Florian Fainelli (1):
> r6040: set MODULE_VERSION
>
> Florian Mickler (1):
> drm/i915: Fix use of uninitialized var in 40a5f0de
>
> Francesco VIRLINZI (1):
> sh: intc: Added resume from hibernation support to the intc
>
> Frederic Weisbecker (3):
> tracing/syscalls: use a dedicated file header
> lockdep: warn about lockdep disabling after kernel taint
> lockdep: continue lock debugging despite some taints
>
> From: Thiemo Nagel (1):
> ext4: check block device size on mount
>
> Gautham R Shenoy (1):
> sched: Print sched_group::__cpu_power in sched_domain_debug
>
> Geert Uytterhoeven (5):
> ide: Fix host drivers that need IRQF_SHARED
> ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for data
> namespaces: move get_mq() inside #ifdef CONFIG_SYSCTL
> at24: make input buffers of at24_*write() const
> at25: make input buffers of at25_*write() const
>
> Grant Grundler (1):
> ide: remove wmb() from ide-dma-sff.c and scc_pata.c
>
> Grant Likely (1):
> xsysace: Fix dereferencing of cf_id after hd_driveid removal
>
> H. Peter Anvin (1):
> x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes
>
> Hannes Eder (2):
> NULL noise: drivers/platform/x86/panasonic-laptop.c
> NULL noise: arch/x86/xen/smp.c
>
> Heiko Carstens (1):
> mutex: have non-spinning mutexes on s390 by default
>
> Helge Deller (1):
> Input: hilkbd - fix crash when removing hilkbd module
>
> Herbert Xu (1):
> module: try_then_request_module must wait
>
> Hidetoshi Seto (2):
> posixtimers, sched: Fix posix clock monotonicity
> x86: smarten /proc/interrupts output for new counters
>
> Huang Weiyi (5):
> ACPI: cpufreq: remove dupilcated #include
> ide: remove unused #include <linux/version.h>
> hp_accel: remove unused #include <version.h>
> sysrq: remove duplicated #include
> microblaze: remove duplicated #include's
>
> Hugh Dickins (2):
> shmem: respect MAX_LFS_FILESIZE
> x86 microcode: revert some work_on_cpu
>
> Ian Campbell (2):
> xen: resume interrupts before system devices.
> xen: honour VCPU availability on boot
>
> Ingo Molnar (2):
> sched: refresh MAINTAINERS entry
> lockdep: warn about lockdep disabling after kernel taint, fix
>
> Jan Beulich (1):
> kbuild: remove pointless strdup() on arguments passed to new_module() in modpost
>
> Jan Dumon (1):
> MAINTAINERS: switch maintainer of the hso driver
>
> Jan Kara (3):
> ext3: Try to avoid starting a transaction in writepage for data=writepage
> jbd: update locking coments
> ext2: fix data corruption for racing writes
>
> Jarkko Lavinen (2):
> mmc: Accept EXT_CSD rev 1.3 since it is backwards compatible with 1.2
> omap_hsmmc: Do not expect cmd/data to be non-null when CC/TC occurs
>
> Jaswinder Singh (2):
> firmware: convert av7110 driver to request_firmware()
> Remove fdump tool for av7110 firmware
>
> Jaswinder Singh Rajput (1):
> x86: cpu_debug remove execute permission
>
> Jean Delvare (6):
> ACPI: Adjust Kelvin offset to match local implementation
> i2c-algo-pca: Fix use of uninitialized variable in debug message
> i2c-voodoo3: Deprecate in favor of tdfxfb
> i2c: Let new-style drivers implement attach_adapter
> MAINTAINERS: bluesmoke-devel list is moderated for non-subscribers
> edac: use to_delayed_work()
>
> Jeff Garzik (1):
> [libata] sata_via: kill uninit'd var warning
>
> Jeff Haran (1):
> edac: fix local pci_write_bits32
>
> Jeremy Fitzhardinge (13):
> xen: disable preempt for leave_lazy_mmu
> xen: separate p2m allocation from setting
> xen: split construction of p2m mfn tables from registration
> xen: clean up xen_load_gdt
> xen: make xen_load_gdt simpler
> xen: remove xen_load_gdt debug
> xen: mask XSAVE from cpuid
> x86-64: remove PGE from must-have feature list
> xen/mmu: some early pagetable cleanups
> xen/mmu: weaken flush_tlb_other test
> xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
> xen: clean up gate trap/interrupt constants
> xen: add FIX_TEXT_POKE to fixmap
>
> Joe Perches (20):
> Add scripts/get_maintainer.pl
> MAINTAINERS - Add file patterns
> MAINTAINERS - Standardize style
> MAINTAINERS - Remove HP Fibre Channel HBA no longer in tree
> MAINTAINERS - standardize "T: git urls"
> MAINTAINERS - Add Linus Torvalds' git
> MAINTAINERS - i2c_tiny_usb T: should be W:
> MAINTAINERS - Update FPU Emulator contact address and web page
> MAINTAINERS - Remove x86/Voyager no longer in tree
> MAINTAINERS - Remove cyblafb frame buffer no longer in tree
> MAINTAINERS - Coalesce sections "DVB" and "Video for Linux"
> MAINTAINERS - Update M68K patterns
> MAINTAINERS - Update DRIVER CORE patterns
> MAINTAINERS - Add missing "/" to some pattern directories
> MAINTAINERS - Add additional patterns
> MAINTAINERS - Update Freescale sound patterns
> scripts/get_maintainer.pl - Allow multiple files on command line
> MAINTAINERS - Update frv arch patterns
> MAINTAINERS - Update MN10300 patterns
> include/video/cyblafb.h: remove it, it's unused
>
> Johannes Berg (1):
> Input: stop autorepeat timer on key release
>
> Jonathan Cameron (1):
> hwmon: sht15 humidity sensor driver
>
> Justin Waters (2):
> [ARM] 5445/1: AT91: Remove flexible array from USBH platform data
> [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array
>
> KAMEZAWA Hiroyuki (1):
> memcg: remove warning when CONFIG_DEBUG_VM=n
>
> Kevin Hilman (1):
> omap_hsmmc: Flush posted write to IRQ
>
> Kirill Smelkov (1):
> kbuild: fix a few typos in top-level Makefile
>
> Krzysztof Helt (1):
> cirrusfb: do not allow unsupported pixel depth
>
> Kuninori Morimoto (4):
> sh: urquell: Add board comment
> sh: urquell: Fix up address mapping in board comments.
> sh: ap325: use edge control for ov772x camera
> sh: sh7786: modify usb setup timeout judgment bug.
>
> Lai Jiangshan (4):
> tracing: disable seeking for trace_pipe_raw
> tracing: allocate page when needed
> tracing: update file->f_pos when splice(2) it
> tracing: fix splice return too large
>
> Leandro Dorileo (1):
> tty: Update some of the USB kernel doc
>
> Len Brown (2):
> ACPI: delete acpi_device.g_list
> ACPICA: delete check for AML access to port 0x81-83
>
> Lennert Buytenhek (1):
> mv643xx_eth: don't reset the rx coal timer on interface up
>
> Li Zefan (8):
> blktrace: pass the right pointer to kfree()
> tracing: consolidate documents
> tracing: fix document references
> tracing/filters: NIL-terminate user input filter
> tracing/filters: fix NULL pointer dereference
> tracing/filters: allow user input integer to be oct or hex
> tracing/filters: return proper error code when writing filter file
> Documentation/sysctl/net.txt: fix a typo
>
> Linus Torvalds (5):
> Remove stale include/asm-mn10300/.gitignore file
> async: Fix module loading async-work regression
> Revert "ACPI battery: fix async boot oops"
> Fix quilt merge error in acpi-cpufreq.c
> Linux 2.6.30-rc2
>
> Linus Walleij (1):
> [ARM] 5447/1: Add SZ_32K
>
> Ma Ling (1):
> drm/i915: sync hdmi detection by hdmi identifier with 2D
>
> Marcin Slusarz (1):
> x86: fix wrong section of pat_disable & make it static
>
> Marek Vasut (4):
> [ARM] pxa: Palm Tungsten E2 basic support
> [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
> [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
> [ARM] pxa/cm-x2xx: fix ucb1400 not being registered
>
> Mark Brown (3):
> Input: wm97xx - use disable_irq_nosync() for Mainstone
> Input: add accelerated touchscreen support for Marvell Zylonite
> [ARM] pxa: register AC97 controller devices
>
> Martin K. Petersen (1):
> dm: add integrity support
>
> Masami Hiramatsu (2):
> x86: fix set_fixmap to use phys_addr_t
> x86: fix set_fixmap to use phys_addr_t
>
> Matthew Garrett (1):
> efifb: exit if framebuffer address is invalid
>
> Maxime Bizon (1):
> kbuild: fix spurious initramfs rebuild
>
> Michael Ellerman (1):
> mm: add documentation describing what tsk->active_mm means vs tsk->mm
>
> Michael Hennerich (3):
> Input: bf54x-keys - fix typo in warning
> Input: add AD7877 touchscreen driver
> Input: add AD7879 Touchscreen driver
>
> Michal Januszewski (5):
> fbdev: fix color component field length documentation
> uvesafb: fix color component length for pseudocolor modes
> s3fb: fix color component length for pseudocolor modes
> sa1100fb: fix color component length for pseudocolor modes
> sisfb: fix color component length for pseudocolor modes
>
> Michal Simek (66):
> microblaze_v8: Cpuinfo handling
> microblaze_v8: Open firmware files
> microblaze_v8: Platform bus registration
> microblaze_v8: exception handling
> microblaze_v8: Signal support
> microblaze_v8: Selfmodified code
> microblaze_v8: cache support
> microblaze_v8: Generic dts file for platforms
> microblaze_v8: kernel modules support
> microblaze_v8: lmb include file
> microblaze_v8: PVR support, cpuinfo support
> microblaze_v8: defconfig file
> microblaze_v8: assembler files head.S, entry-nommu.S, syscall_table.S
> microblaze_v8: vmlinux.lds.S - linker script
> microblaze_v8: supported function for memory - kernel/lib
> microblaze_v8: checksum support
> microblaze_v8: early_printk support
> microblaze_v8: uaccess files
> microblaze_v8: heartbeat file
> microblaze_v8: setup.c, setup.h - system setting
> microblaze_v8: asm-offsets.c
> microblaze_v8: process and init task function
> microblaze_v8: delay.h, timex.h
> microblaze_v8: ptrace support
> microblaze_v8: IPC support
> microblaze_v8: traps support
> microblaze_v8: memory inicialization, MMU, TLB
> microblaze_v8: page.h, segment.h, unaligned.h
> microblaze_v8: includes SHM*, msgbuf
> microblaze_v8: bug headers files
> microblaze_v8: definitions of types
> microblaze_v8: ioctl support
> microblaze_v8: io.h IO operations
> microblaze_v8: headers for executables format FLAT, ELF
> microblaze_v8: dma support
> microblaze_v8: headers for irq
> microblaze_v8: atomic.h bitops.h swab.h byteorder.h
> microblaze_v8: headers pgalloc.h pgtable.h
> microblaze_v8: system.h processor.h
> microblaze_v8: clinkage.h linkage.h sections.h kmap_types.h
> microblaze_v8: stats headers
> microblaze_v8: termbits.h termios.h
> microblaze_v8: sigcontext.h siginfo.h
> microblaze_v8: headers simple files - empty or redirect to asm-generic
> microblaze_v8: gpio.h, serial.h
> microblaze_v8: namei.h
> microblaze_v8: headers files entry.h current.h mman.h registers.h sembuf.h
> microblaze_v8: device.h param.h topology.h
> microblaze_v8: pool.h socket.h
> microblaze_v8: fcntl.h sockios.h ucontext.h
> microblaze_v8: unistd.h
> microblaze_v8: string.h thread_info.h
> microblaze_v8: Kbuild file
> microblaze_v8: pci headers
> microblaze_v8: syscalls.h
> microblaze_v8: Interrupt handling and timer support
> microblaze_v8: Kconfig patches
> microblaze_v8: Makefiles for Microblaze cpu
> microblaze_v8: Uartlite for Microblaze
> microblaze_v8: Add MAINTAINERS fragment
> microblaze: Fix problem with removing zero length files
> microblaze: Add missing empty ftrace.h file
> microblaze: Add TIMESTAMPING constants to socket.h
> microblaze: Simplify copy_thread()
> microblaze: struct device - replace bus_id with dev_name()
> microblaze: Add missing FILE tag to MAINTAINERS
>
> Mike Rapoport (3):
> Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android
> Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events
> [ARM] pxa/em-x270: add libertas device registration
>
> Miklos Szeredi (2):
> fuse: fix argument type in fuse_get_user_pages()
> fuse: fix "direct_io" private mmap
>
> Mikulas Patocka (6):
> dm: remove limited barrier support
> dm: rework queueing and suspension
> dm: remove dm_request loop
> dm: implement basic barrier support
> dm kcopyd: prepare for callback race fix
> dm kcopyd: fix callback race
>
> Nathan Lynch (1):
> sched: do not count frozen tasks toward load
>
> Nikanth Karthikesan (1):
> init/initramfs: fix warning with CONFIG_BLK_DEV_RAM=n
>
> Nobuhiro Iwamatsu (1):
> nommu: fix typo vma->pg_off to vma->vm_pgoff
>
> Oleg Nesterov (4):
> posix-timers: fix RLIMIT_CPU && fork()
> posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF)
> kthread: move sched-realeted initialization from kthreadd context
> ptrace: fix exit_ptrace() vs ptrace_traceme() race
>
> Or Gerlitz (1):
> IPoIB: Document newish features
>
> Pablo Neira Ayuso (1):
> netfilter: ctnetlink: fix regression in expectation handling
>
> Paul Menzel (1):
> drivers/video/aty/radeon_base.c: fix typo in comment
>
> Paul Mundt (7):
> sh: wire up sys_preadv/sys_pwritev() syscalls.
> sh: Provide cpumask_of_pcibus() to fix NUMA build.
> sh: Add support for DMA API debugging.
> sh: Plug in support for ARCH=sh64 using sh SRCARCH.
> MAINTAINERS: Update sh architecture file patterns.
> sh: Pre-allocate a reasonable number of DMA debug entries.
> sh: Add in PCI bus for DMA API debugging.
>
> Paulius Zaleckas (3):
> [WATCHDOG] remove ARM26 sections
> imxmmc: init-exit rework
> imxmmc: move RSSR BLR
>
> Peter Korsgaard (1):
> kbuild: use git svn instead of git-svn in setlocalversion
>
> Peter Zijlstra (1):
> mm: move the scan_unevictable_pages sysctl to the vm table
>
> Phil Sutter (1):
> Input: add driver for S1 button of rb532
>
> Philipp Zabel (2):
> pda_power: Add optional OTG transceiver and voltage regulator support
> [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
>
> Pierre Ossman (1):
> New mail address for Pierre Ossman
>
> Rafael J. Wysocki (1):
> PM/Hibernate: Wait for SCSI devices scan to complete during resume
>
> Rakib Mullick (1):
> x86: Fix section mismatches in mpparse
>
> Randy Dunlap (5):
> timers: add missing kernel-doc
> ethoc: fix library build errors
> docbook: make cleandocs
> MAINTAINERS: fix Andreas's email address
> filemap: fix kernel-doc warnings
>
> Randy Robertson (1):
> initramfs: fix initramfs to work with hardlinked init
>
> Robin Holt (4):
> sgi-xpc: update SGI XP/XPC/XPNET maintainer
> sgi-xpc: prevent false heartbeat failures
> sgi-xpc: implement opencomplete messaging
> sgi-xpc: clean up numerous globals
>
> Roel Kluin (1):
> Input: pc110pad - use no_pci_devices()
>
> Roland Dreier (3):
> IB/mlx4: Use pgprot_writecombine() for BlueFlame pages
> mlx4_core: Don't leak mailbox for SET_PORT on Ethernet ports
> IPoIB: Avoid free_netdev() BUG when destroying a child interface
>
> Roland McGrath (1):
> ptrace: some checkpatch fixes
>
> Russell King (1):
> [ARM] omap: fix omap1 clock usecount decrement bug
>
> Rusty Russell (1):
> sched_rt: don't allocate cpumask in fastpath
>
> Ryusuke Konishi (8):
> nilfs2: return f_fsid for statfs2
> nilfs2: fix lockdep recursive locking warning on bmap
> nilfs2: fix lockdep recursive locking warning on meta data files
> nilfs2: remove module version
> nilfs2: simplify handling of active state of segments fix
> nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error
> nilfs2: segment usage file cleanups
> nilfs2: fix possible mismatch of sufile counters on recovery
>
> Sam Ravnborg (3):
> kconfig: fix update-po-config to accect backslash in input
> kbuild: introduce destination-y for exported headers
> Documentation: explain the difference between __bitwise and __bitwise__
>
> Sascha Hauer (1):
> FEC driver: add missing #endif
>
> Serge E. Hallyn (2):
> cap_prctl: don't set error to 0 at 'no_change'
> add some long-missing capabilities to fs_mask
>
> Sergei Shtylyov (9):
> ide-h8300: remove mm_{inw|outw}()
> at91_ide: remove custom tf_{read|load}() methods
> ide-h8300: remove custom tf_{read|load}() methods
> ide: replace IDE_TFLAG_* flags by IDE_VALID_*
> ide: simplify 'struct ide_taskfile'
> ide: move common code out of tf_load() method
> ide: call write_devctl() method from tf_read() method
> ide: refactor tf_load() method
> ide: refactor tf_read() method
>
> Shaohua Li (3):
> ACPI: convert acpi_device_lock spinlock to mutex
> drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed)
> drm/i915: fix scheduling while holding the new active list spinlock
>
> Shen Feng (1):
> doc: use correct debugfs mountpoint
>
> Stanislaw Gruszka (2):
> at91_ide: remove unused ide_mm_{outb,inb}
> at91_ide: turn on PIO 6 support
>
> Stefan Husemann (1):
> intelfb: support i854
>
> Steve Glendinning (1):
> smsc911x: correct debugging message on mii read timeout
>
> Steve Wise (2):
> RDMA/cxgb3: Handle EEH events
> RDMA/cxgb3: Release dependent resources only when endpoint memory is freed.
>
> Stoyan Gaydarov (1):
> afs: BUG to BUG_ON changes
>
> Suresh Siddha (1):
> x86: add linux kernel support for YMM state
>
> Takashi Iwai (1):
> ALSA: wavefront - Always use request_firmware()
>
> Tejun Heo (2):
> percpu: unbreak alpha percpu
> ahci: force CAP_NCQ for earlier NV MCPs
>
> Tetsuo Handa (3):
> tracing: append a comma to INIT_FTRACE_GRAPH
> tomoyo: add Documentation/tomoyo.txt
> tomoyo: version bump to 2.2.0.
>
> Theodore Ts'o (1):
> block_write_full_page: switch synchronous writes to use WRITE_SYNC_PLUG
>
> Thiemo Nagel (2):
> ext4: Fix big-endian problem in __ext4_check_blockref()
> ext4: Fix off-by-one-error in ext4_valid_extent_idx()
>
> Thomas Gleixner (1):
> MN10300: Convert obsolete no_irq_type to no_irq_chip
>
> Thomas Reitmayr (1):
> [WATCHDOG] orion5x_wdt: Add shutdown callback, use watchdog ping function
>
> Tony Breeds (1):
> parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpc
>
> Tony Lindgren (1):
> mmc: Fix compile for omap_hsmmc.c
>
> Tony Luck (1):
> [IA64] wire up preadv/pwritev system calls
>
> Uwe Kleine-König (4):
> [WATCHDOG] at91rm9200_wdt.c: move probe function to .devinit.text
> [WATCHDOG] ks8695_wdt.c: move probe function to .devinit.text
> [WATCHDOG] omap_wdt.c: move probe function to .devinit.text
> kbuild: fix option processing for -I in headerdep
>
> Vegard Nossum (2):
> ACPI battery: fix async boot oops
> ata: fix obviously wrong comment
>
> Venkatesh Pallipadi (3):
> ACPI x86: Cleanup acpi_cpufreq structures related to aperf/mperf
> ACPI x86: Make aperf/mperf MSR access in acpi_cpufreq read_only
> x86 ACPI: Add support for Always Running APIC timer
>
> Ville Syrjala (3):
> Input: ati_remote2 - complete suspend support
> Input: ati_remote2 - add per device attrs
> Input: ati_remote2 - check module params
>
> Vitaliy Gusev (1):
> kthread: Don't looking for a task in create_kthread() #2
>
> Weidong Han (1):
> x86, intr-remap: fix eoi for interrupt remapping without x2apic
>
> Wim Van Sebroeck (3):
> [WATCHDOG] i6300esb.c: Cleanup
> [WATCHDOG] i6300esb.c: Fix the GETSTATUS and GETBOOTSTATUS ioctls.
> [WATCHDOG] i6300esb.c: Restructure initialization of the device
>
> Wolfgang Muees (3):
> mmc_spi: do not check CID and CSD blocks with CRC16
> mmc_spi: convert timeout handling to jiffies and avoid busy waiting
> mmc_spi: support for non-byte-aligned cards
>
> Yang Hongyang (2):
> drivers/net/eql.c: Fix a dev leakage.
> Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)
>
> Yinghai Lu (2):
> irq: fix cpumask memory leak on offstack cpumask kernels
> x86: make 64 bit to use default_inquire_remote_apic
>
> Yoshihiro Shimoda (1):
> sh: sh7785lcr: fix PCI address map for 32-bit mode
>
> Yossi Etigin (2):
> RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups
> RDMA/cma: Create cm id even when IB port is down
>
> Yuri Tikhonov (1):
> shmem: fix division by zero
>
> Zhaolei (3):
> printk: fix wrong format string iter for printk
> Make __stringify support variable argument macros too
> ftrace: Output REC->var instead of __entry->var for trace format
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists