Message-ID: <0F1B54C89D5F954D8535DB252AF412FA03E3E862@chinexm1.ad.analog.com>
Date:	Thu, 16 Apr 2009 17:10:26 +0800
From:	"Cai, Cliff" <Cliff.Cai@...log.com>
To:	"Jaswinder Singh Rajput" <jaswinder@...nel.org>,
	<cliffcai.sh@...il.com>
CC:	<drzeus-mmc@...eus.cx>, <linux-kernel@...r.kernel.org>,
	<pierre@...man.eu>, "David Brownell" <david-b@...bell.net>
Subject: RE: [PATCH] [mmc/host]:Blackfin SD Host Controller Driver

Yes, should I resend this patch to Pierre with new email address?

Thanks 

Cliff
>-----Original Message-----
>From: Jaswinder Singh Rajput [mailto:jaswinder@...nel.org] 
>Sent: Thursday, April 16, 2009 4:56 PM
>To: cliffcai.sh@...il.com
>Cc: drzeus-mmc@...eus.cx; linux-kernel@...r.kernel.org; Cai, 
>Cliff; pierre@...man.eu; David Brownell
>Subject: Re: [PATCH] [mmc/host]:Blackfin SD Host Controller Driver
>
>It seems you are mailing to old email address, please check 
>latest MAINTAINERS. CC updated email address.
>
>On Thu, 2009-04-16 at 17:32 +0800, cliffcai.sh@...il.com wrote:
>> From: Cliff Cai <cliffcai.sh@...il.com>
>> 
>> Signed-off-by: Cliff Cai <cliffcai.sh@...il.com>
>> ---
>>  drivers/mmc/host/Kconfig    |   18 ++
>>  drivers/mmc/host/Makefile   |    2 +-
>>  drivers/mmc/host/bfin_sdh.c |  648 
>> +++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 667 insertions(+), 1 deletions(-)  create mode 
>> 100644 drivers/mmc/host/bfin_sdh.c
>> 
>> diff --git a/drivers/mmc/host/Kconfig 
>b/drivers/mmc/host/Kconfig index 
>> d00a35d..588813f 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -242,3 +242,21 @@ config MMC_TMIO
>>  	  This provides support for the SD/MMC cell found in TC6393XB,
>>  	  T7L66XB and also ipaq ASIC3
>>  
>> +config SDH_BFIN
>> +	tristate "Blackfin Secure Digital Host support"
>> +	depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512))
>> +	help
>> +	  If you say yes here you will get support for the 
>Blackfin on-chip
>> +	  Secure Digital Host interface.  This includes support 
>for MMC and
>> +	  SD cards.
>> +
>> +	  To compile this driver as a module, choose M here: the
>> +	  module will be called bfin_sdh.
>> +
>> +	  If unsure, say N.
>> +
>> +config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
>> +	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor 
>Workaround"
>> +	depends on SDH_BFIN
>> +	help
>> +	  If you say yes here SD-Cards may work on the EZkit.
>> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile 
>> index 970a997..0af1f7a 100644
>> --- a/drivers/mmc/host/Makefile
>> +++ b/drivers/mmc/host/Makefile
>> @@ -29,4 +29,4 @@ endif
>>  obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
>>  obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
>>  obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
>> -
>> +obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
>> diff --git a/drivers/mmc/host/bfin_sdh.c 
>b/drivers/mmc/host/bfin_sdh.c 
>> new file mode 100644 index 0000000..c22f326
>> --- /dev/null
>> +++ b/drivers/mmc/host/bfin_sdh.c
>> @@ -0,0 +1,648 @@
>> +/*
>> + *  linux/drivers/mmc/bfin_sdh.c - Blackfin SDH Controller Driver
>> + *
>> + *  Copyright (C) 2007 Analog Device Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> +modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +/* In term of 
>> +ADSP_BF5xx_Blackfin_Processor_Peripheral_Hardware_Reference,
>> + * the SDH allows software to detect a card when it is 
>inserted into its slot.
>> + * The SD_DATA3 pin powers up low due to a special pull-down 
>> +resistor. When an
>> + * SD Card is inserted in its slot, the resistance increases and a 
>> +rising edge
>> + * is detected by the SDH module.
>> + * But this doesn't work sometimes. When a MMC/SD card is inserted, 
>> +the voltage
>> + * doesn't rise on SD_DATA3. In term of The MultiMediaCard System 
>> +Specification,
>> + * SD_DATA3 is used as CS pin in SPI mode. The MultiMediaCard wakes 
>> +up in the
>> + * MultiMediaCard mode. During the scan procedure, host will send 
>> +CMD0 to reset
>> + * MMC card, if CS pin is low, MMC card will enter SPI mode. Of 
>> +course Secure
>> + * Digital Host controller is not a SPI controller. So the Card 
>> +detect function
>> + * has to be disabled. After card is inserted run "echo 0 > 
>/proc/driver/sdh"
>> + * to trigger card scanning */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/ioport.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/mmc/host.h>
>> +#include <linux/proc_fs.h>
>> +
>> +#include <asm/cacheflush.h>
>> +#include <asm/dma.h>
>> +#include <asm/portmux.h>
>> +#include <asm/bfin_sdh.h>
>> +
>> +#define DRIVER_NAME	"bfin-sdh"
>> +
>> +#define NR_SG	32
>> +
>> +#if defined(CONFIG_BF51x)
>> +#define bfin_write_SDH_PWR_CTL		bfin_write_RSI_PWR_CTL
>> +#define bfin_read_SDH_CLK_CTL		bfin_read_RSI_CLK_CTL
>> +#define bfin_write_SDH_CLK_CTL		bfin_write_RSI_CLK_CTL
>> +#define bfin_write_SDH_ARGUMENT		bfin_write_RSI_ARGUMENT
>> +#define bfin_write_SDH_COMMAND		bfin_write_RSI_COMMAND
>> +#define bfin_write_SDH_DATA_TIMER	bfin_write_RSI_DATA_TIMER
>> +#define bfin_read_SDH_RESPONSE0		bfin_read_RSI_RESPONSE0
>> +#define bfin_read_SDH_RESPONSE1		bfin_read_RSI_RESPONSE1
>> +#define bfin_read_SDH_RESPONSE2		bfin_read_RSI_RESPONSE2
>> +#define bfin_read_SDH_RESPONSE3		bfin_read_RSI_RESPONSE3
>> +#define bfin_write_SDH_DATA_LGTH	bfin_write_RSI_DATA_LGTH
>> +#define bfin_read_SDH_DATA_CTL		bfin_read_RSI_DATA_CTL
>> +#define bfin_write_SDH_DATA_CTL		bfin_write_RSI_DATA_CTL
>> +#define bfin_read_SDH_DATA_CNT		bfin_read_RSI_DATA_CNT
>> +#define bfin_write_SDH_STATUS_CLR	bfin_write_RSI_STATUS_CLR
>> +#define bfin_read_SDH_E_STATUS		bfin_read_RSI_E_STATUS
>> +#define bfin_write_SDH_E_STATUS		bfin_write_RSI_E_STATUS
>> +#define bfin_read_SDH_STATUS		bfin_read_RSI_STATUS
>> +#define bfin_write_SDH_MASK0		bfin_write_RSI_MASK0
>> +#define bfin_read_SDH_CFG		bfin_read_RSI_CFG
>> +#define bfin_write_SDH_CFG		bfin_write_RSI_CFG
>> +#endif
>> +
>> +struct dma_desc_array {
>> +	unsigned long	start_addr;
>> +	unsigned short	cfg;
>> +	unsigned short	x_count;
>> +	short		x_modify;
>> +} __attribute__((packed));
>> +
>> +struct sdh_host {
>> +	struct mmc_host		*mmc;
>> +	spinlock_t		lock; /* Why I have to give a 
>comment here? */
>> +	struct resource		*res;
>> +	void __iomem		*base;
>> +	int			irq;
>> +	int			stat_irq;
>> +	int			dma_ch;
>> +	int			dma_dir;
>> +	struct dma_desc_array	*sg_cpu;
>> +	dma_addr_t		sg_dma;
>> +	int			dma_len;
>> +
>> +	unsigned int		imask;
>> +	unsigned int		power_mode;
>> +	unsigned int		clk_div;
>> +
>> +	struct mmc_request	*mrq;
>> +	struct mmc_command	*cmd;
>> +	struct mmc_data		*data;
>> +};
>> +
>> +static struct bfin_sd_host *get_sdh_data(struct platform_device 
>> +*pdev) {
>> +	return pdev->dev.platform_data;
>> +}
>> +
>> +static void sdh_stop_clock(struct sdh_host *host) {
>> +	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() & ~CLK_E);
>> +	SSYNC();
>> +}
>> +
>> +static void sdh_enable_stat_irq(struct sdh_host *host, unsigned int 
>> +mask) {
>> +	unsigned long flags;
>> +
>> +	spin_lock_irqsave(&host->lock, flags);
>> +	host->imask |= mask;
>> +	bfin_write_SDH_MASK0(mask);
>> +	SSYNC();
>> +	spin_unlock_irqrestore(&host->lock, flags); }
>> +
>> +static void sdh_disable_stat_irq(struct sdh_host *host, 
>unsigned int 
>> +mask) {
>> +	unsigned long flags;
>> +
>> +	spin_lock_irqsave(&host->lock, flags);
>> +	host->imask &= ~mask;
>> +	bfin_write_SDH_MASK0(host->imask);
>> +	SSYNC();
>> +	spin_unlock_irqrestore(&host->lock, flags); }
>> +
>> +static void sdh_setup_data(struct sdh_host *host, struct mmc_data 
>> +*data) {
>> +	unsigned int length;
>> +	unsigned int data_ctl;
>> +	unsigned int dma_cfg;
>> +#if defined(CONFIG_BF54x)
>> +	int i;
>> +#endif
>> +	pr_debug("%s enter flags:0x%x\n", __func__, data->flags);
>> +	host->data = data;
>> +	data_ctl = 0;
>> +	dma_cfg = 0;
>> +
>> +	length = data->blksz * data->blocks;
>> +	bfin_write_SDH_DATA_LGTH(length);
>> +
>> +	if (data->flags & MMC_DATA_STREAM)
>> +		data_ctl |= DTX_MODE;
>> +
>> +	if (data->flags & MMC_DATA_READ)
>> +		data_ctl |= DTX_DIR;
>> +
>> +	BUG_ON(data->blksz & (data->blksz -1));
>> +	data_ctl |= ((ffs(data->blksz) -1) << 4);
>> +
>> +	bfin_write_SDH_DATA_CTL(data_ctl);
>> +
>> +	bfin_write_SDH_DATA_TIMER(0xFFFFF);
>> +	SSYNC();
>> +
>> +	if (data->flags & MMC_DATA_READ) {
>> +		host->dma_dir = DMA_FROM_DEVICE;
>> +		dma_cfg |= WNR;
>> +	} else
>> +		host->dma_dir = DMA_TO_DEVICE;
>> +
>> +	sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT 
>| DAT_END));
>> +	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, 
>> +data->sg_len, host->dma_dir); #if defined(CONFIG_BF54x)
>> +	dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | 
>WDSIZE_32 | DMAEN;
>> +	for (i = 0; i < host->dma_len; i++) {
>> +		host->sg_cpu[i].start_addr = 
>sg_dma_address(&data->sg[i]);
>> +		host->sg_cpu[i].cfg = dma_cfg;
>> +		host->sg_cpu[i].x_count = sg_dma_len(&data->sg[i]) / 4;
>> +		host->sg_cpu[i].x_modify = 4;
>> +		pr_debug("%d: start_addr:0x%lx, cfg:0x%x, 
>x_count:0x%x, x_modify:0x%x\n",
>> +				i, host->sg_cpu[i].start_addr, 
>host->sg_cpu[i].cfg,
>> +				host->sg_cpu[i].x_count, 
>host->sg_cpu[i].x_modify);
>> +	}
>> +	flush_dcache_range((unsigned int)host->sg_cpu, \
>> +			(unsigned int)host->sg_cpu + \
>> +			host->dma_len * sizeof(struct dma_desc_array));
>> +	/* Set the last descriptor to stop mode */
>> +	host->sg_cpu[host->dma_len - 1].cfg &= ~(DMAFLOW | NDSIZE);
>> +	host->sg_cpu[host->dma_len - 1].cfg |= DI_EN;
>> +
>> +	set_dma_curr_desc_addr(host->dma_ch, (unsigned long 
>*)host->sg_dma);
>> +	set_dma_x_count(host->dma_ch, 0);
>> +	set_dma_x_modify(host->dma_ch, 0);
>> +	set_dma_config(host->dma_ch, dma_cfg);
>> +	
>> +/* RSI DMA doesn't work in array mode */ #elif defined(CONFIG_BF51x)
>> +	dma_cfg |= WDSIZE_32 | DMAEN;
>> +	set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
>> +	set_dma_x_count(host->dma_ch, length / 4);
>> +	set_dma_x_modify(host->dma_ch, 4);
>> +	set_dma_config(host->dma_ch, dma_cfg); #endif
>> +	bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | 
>> +DTX_E);
>> +
>> +	SSYNC();
>> +
>> +	pr_debug("%s exit\n", __func__);
>> +}
>> +
>> +static void sdh_start_cmd(struct sdh_host *host, struct mmc_command 
>> +*cmd) {
>> +	unsigned int sdh_cmd;
>> +	unsigned int stat_mask;
>> +
>> +	pr_debug("%s enter cmd:0x%p\n", __func__, cmd);
>> +	WARN_ON(host->cmd != NULL);
>> +	host->cmd = cmd;
>> +
>> +	sdh_cmd = 0;
>> +	stat_mask = 0;
>> +
>> +	sdh_cmd |= cmd->opcode;
>> +
>> +	if (cmd->flags & MMC_RSP_PRESENT) {
>> +		sdh_cmd |= CMD_RSP;
>> +		stat_mask |= CMD_RESP_END;
>> +	} else
>> +		stat_mask |= CMD_SENT;
>> +
>> +	if (cmd->flags & MMC_RSP_136)
>> +		sdh_cmd |= CMD_L_RSP;
>> +
>> +	stat_mask |= CMD_CRC_FAIL | CMD_TIME_OUT;
>> +
>> +	sdh_enable_stat_irq(host, stat_mask);
>> +
>> +	bfin_write_SDH_ARGUMENT(cmd->arg);
>> +	bfin_write_SDH_COMMAND(sdh_cmd | CMD_E);
>> +	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() | CLK_E);
>> +	SSYNC();
>> +}
>> +
>> +static void sdh_finish_request(struct sdh_host *host, struct 
>> +mmc_request *mrq) {
>> +	pr_debug("%s enter\n", __func__);
>> +	host->mrq = NULL;
>> +	host->cmd = NULL;
>> +	host->data = NULL;
>> +	mmc_request_done(host->mmc, mrq);
>> +}
>> +
>> +static int sdh_cmd_done(struct sdh_host *host, unsigned int stat) {
>> +	struct mmc_command *cmd = host->cmd;
>> +
>> +	pr_debug("%s enter cmd:%p\n", __func__, cmd);
>> +	if (!cmd)
>> +		return 0;
>> +
>> +	host->cmd = NULL;
>> +
>> +	if (cmd->flags & MMC_RSP_PRESENT) {
>> +		cmd->resp[0] = bfin_read_SDH_RESPONSE0();
>> +		if (cmd->flags & MMC_RSP_136) {
>> +			cmd->resp[1] = bfin_read_SDH_RESPONSE1();
>> +			cmd->resp[2] = bfin_read_SDH_RESPONSE2();
>> +			cmd->resp[3] = bfin_read_SDH_RESPONSE3();
>> +		}
>> +	}
>> +	if (stat & CMD_TIME_OUT)
>> +		cmd->error = -ETIMEDOUT;
>> +	else if (stat & CMD_CRC_FAIL && cmd->flags & MMC_RSP_CRC)
>> +		cmd->error = -EILSEQ;
>> +
>> +	sdh_disable_stat_irq(host, (CMD_SENT | CMD_RESP_END | 
>CMD_TIME_OUT | 
>> +CMD_CRC_FAIL));
>> +
>> +	if (host->data && !cmd->error) {
>> +		if (host->data->flags & MMC_DATA_WRITE)
>> +			sdh_setup_data(host, host->data);
>> +
>> +		sdh_enable_stat_irq(host, DAT_END | RX_OVERRUN 
>| TX_UNDERRUN | DAT_TIME_OUT);
>> +	} else
>> +		sdh_finish_request(host, host->mrq);
>> +
>> +	return 1;
>> +}
>> +
>> +static int sdh_data_done(struct sdh_host *host, unsigned int stat) {
>> +	struct mmc_data *data = host->data;
>> +
>> +	pr_debug("%s enter stat:0x%x\n", __func__, stat);
>> +	if (!data)
>> +		return 0;
>> +
>> +	disable_dma(host->dma_ch);
>> +	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
>> +		     host->dma_dir);
>> +
>> +	if (stat & DAT_TIME_OUT)
>> +		data->error = -ETIMEDOUT;
>> +	else if (stat & DAT_CRC_FAIL)
>> +		data->error = -EILSEQ;
>> +	else if (stat & (RX_OVERRUN | TX_UNDERRUN))
>> +		data->error = -EIO;
>> +
>> +	if (!data->error)
>> +		data->bytes_xfered = data->blocks * data->blksz;
>> +	else
>> +		data->bytes_xfered = data->blocks * data->blksz - \
>> +				     bfin_read_SDH_DATA_CNT();
>> +
>> +	sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | 
>DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN);
>> +	bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
>> +			DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | 
>RX_OVERRUN | TX_UNDERRUN);
>> +	bfin_write_SDH_DATA_CTL(0);
>> +	SSYNC();
>> +
>> +	host->data = NULL;
>> +	if (host->mrq->stop) {
>> +		sdh_stop_clock(host);
>> +		sdh_start_cmd(host, host->mrq->stop);
>> +	} else
>> +		sdh_finish_request(host, host->mrq);
>> +
>> +	return 1;
>> +}
>> +
>> +static void sdh_request(struct mmc_host *mmc, struct mmc_request 
>> +*mrq) {
>> +	struct sdh_host *host = mmc_priv(mmc);
>> +
>> +	pr_debug("%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
>> +	WARN_ON(host->mrq != NULL);
>> +
>> +	host->mrq = mrq;
>> +	host->data = mrq->data;
>> +
>> +	if (mrq->data && mrq->data->flags & MMC_DATA_READ)
>> +		sdh_setup_data(host, mrq->data);
>> +
>> +	sdh_start_cmd(host, mrq->cmd);
>> +}
>> +
>> +static int sdh_get_ro(struct mmc_host *mmc) {
>> +	/* Host doesn't support read only detection so assume 
>writeable */
>> +	return -ENOSYS;
>> +}
>> +
>> +static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) {
>> +	struct sdh_host *host;
>> +	unsigned long flags;
>> +	u16 clk_ctl = 0;
>> +	u16 pwr_ctl = 0;
>> +	u16 cfg;
>> +	host = mmc_priv(mmc);
>> +
>> +	spin_lock_irqsave(&host->lock, flags);
>> +	if (ios->clock) {
>> +		unsigned long clk_div;
>> +		unsigned long sys_clk;
>> +		sys_clk = get_sclk();
>> +		if (sys_clk % (2*ios->clock) == 0)
>> +			clk_div = sys_clk / (2*ios->clock) - 1;
>> +		else
>> +			clk_div = sys_clk / (2*ios->clock);
>> +		if (clk_div > 0xff)
>> +			clk_div = 0xFF;
>> +		clk_ctl |= clk_div & 0xFF;
>> +		clk_ctl |= CLK_E;
>> +		host->clk_div = clk_div;
>> +	} else
>> +		sdh_stop_clock(host);
>> +
>> +	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) #ifdef 
>> +CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
>> +		pwr_ctl |= ROD_CTL;
>> +#else
>> +		pwr_ctl |= SD_CMD_OD | ROD_CTL;
>> +#endif
>> +
>> +	if (ios->bus_width == MMC_BUS_WIDTH_4) {
>> +		cfg = bfin_read_SDH_CFG();
>> +		cfg &= ~0x80;
>> +		cfg |= 0x40;
>> +		/* Enable 4 bit SDIO */
>> +		cfg |= 0x0c;
>> +		bfin_write_SDH_CFG(cfg);
>> +		clk_ctl |= WIDE_BUS;
>> +	} else {
>> +		cfg = bfin_read_SDH_CFG();
>> +		cfg |= 0x08;
>> +		bfin_write_SDH_CFG(cfg);
>> +	}
>> +
>> +	bfin_write_SDH_CLK_CTL(clk_ctl);
>> +
>> +	host->power_mode = ios->power_mode;
>> +	if (ios->power_mode == MMC_POWER_ON)
>> +		pwr_ctl |= PWR_ON;
>> +
>> +	bfin_write_SDH_PWR_CTL(pwr_ctl);
>> +	SSYNC();
>> +
>> +	spin_unlock_irqrestore(&host->lock, flags);
>> +
>> +	pr_debug("SDH: clk_div = 0x%x actual clock:%ld expected 
>clock:%d\n",
>> +			host->clk_div, 
>host->clk_div?get_sclk()/(2 * (host->clk_div + 1)):0,
>> +			ios->clock);
>> +}
>> +
>> +static const struct mmc_host_ops sdh_ops = {
>> +	.request	= sdh_request,
>> +	.get_ro		= sdh_get_ro,
>> +	.set_ios	= sdh_set_ios,
>> +};
>> +
>> +static irqreturn_t sdh_dma_irq(int irq, void *devid) {
>> +	struct sdh_host *host = devid;
>> +
>> +	pr_debug("%s enter, irq_stat:0x%04x\n", __func__,\
>> +			get_dma_curr_irqstat(host->dma_ch));
>> +	clear_dma_irqstat(host->dma_ch);
>> +	SSYNC();
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t sdh_stat_irq(int irq, void *devid) {
>> +	struct sdh_host *host = devid;
>> +	unsigned int status;
>> +	int handled = 0;
>> +
>> +	pr_debug("%s enter\n", __func__);
>> +	status = bfin_read_SDH_E_STATUS();
>> +	if (status & SD_CARD_DET) {
>> +		mmc_detect_change(host->mmc, 0);
>> +		bfin_write_SDH_E_STATUS(SD_CARD_DET);
>> +	}
>> +
>> +	status = bfin_read_SDH_STATUS();
>> +	if (status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | 
>CMD_CRC_FAIL)) {
>> +		handled |= sdh_cmd_done(host, status);
>> +		bfin_write_SDH_STATUS_CLR( CMD_SENT_STAT | 
>CMD_RESP_END_STAT | \
>> +				CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
>> +		SSYNC();
>> +	}
>> +
>> +	status = bfin_read_SDH_STATUS();
>> +	if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | 
>RX_OVERRUN | TX_UNDERRUN))
>> +		handled |= sdh_data_done(host, status);
>> +
>> +	pr_debug("%s exit\n\n", __func__);
>> +
>> +	return IRQ_RETVAL(handled);
>> +}
>> +
>> +static int proc_write(struct file *file, const char __user *buffer,
>> +		unsigned long count, void *data)
>> +{
>> +	struct sdh_host *host = data;
>> +	unsigned long cmd = simple_strtoul(buffer, NULL, 16);
>> +
>> +	switch (cmd) {
>> +	case 0:
>> +		mmc_detect_change(host->mmc, 0);
>> +		break;
>> +	default:
>> +		printk(KERN_ERR "bfin_sdh: cmd %lu not support\n", cmd);
>> +		break;
>> +	}
>> +
>> +	return count;
>> +}
>> +
>> +static int __devinit sdh_probe(struct platform_device *pdev) {
>> +	struct mmc_host *mmc;
>> +	struct sdh_host *host = NULL;
>> +	struct proc_dir_entry *sd_entry;
>> +	struct bfin_sd_host *drv_data = get_sdh_data(pdev);
>> +	int ret;
>> +
>> +	if (!drv_data) {
>> +		dev_err(&pdev->dev, "missing platform driver data\n");
>> +		ret = -EINVAL;
>> +		goto out;
>> +	}
>> +
>> +	mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
>> +	if (!mmc) {
>> +		ret = -ENOMEM;
>> +		goto out;
>> +	}
>> +
>> +	mmc->ops = &sdh_ops;
>> +	mmc->max_phys_segs = NR_SG;
>> +	mmc->max_seg_size = 1 << 16;
>> +	mmc->max_blk_size = 2 << 11;
>> +	mmc->max_blk_count = 2 << 16;
>> +	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
>> +	mmc->f_min = get_sclk() >> 9;
>> +	mmc->f_max = get_sclk();
>> +	mmc->caps = MMC_CAP_4_BIT_DATA;
>> +	host = mmc_priv(mmc);
>> +	host->mmc = mmc;
>> +
>> +	spin_lock_init(&host->lock);
>> +	host->irq = drv_data->irq_int0;
>> +	host->dma_ch = drv_data->dma_chan;
>> +	ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH 
>Status IRQ", host);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "unable to request status irq\n");
>> +		goto out1;
>> +	}
>> +
>> +	ret = request_dma(host->dma_ch, DRIVER_NAME "DMA");
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "unable to request DMA channel\n");
>> +		goto out2;
>> +	}
>> +
>> +	ret = set_dma_callback(host->dma_ch, sdh_dma_irq, host);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "unable to request DMA irq\n");
>> +		goto out3;
>> +	}
>> +
>> +	host->sg_cpu = dma_alloc_coherent(&pdev->dev, 
>PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
>> +	if (host->sg_cpu == NULL) {
>> +		ret = -ENOMEM;
>> +		goto out3;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, mmc);
>> +	mmc_add_host(mmc);
>> +	ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "unable to request 
>peripheral pins\n");
>> +		goto out3;
>> +	}
>> +
>> +#if defined(CONFIG_BF54x)
>> +	/* Secure Digital Host shares DMA with Nand controller */
>> +	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 
>0x1); #endif
>> +
>> +	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
>> +	SSYNC();
>> +
>> +	/* Disable card inserting detection pin.It's not that 
>useful,since
>> +	 * we can't detect removal,and it will affect card 
>detection on BF51x.
>> +	 */
>> +	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
>> +	SSYNC();
>> +	sd_entry = create_proc_entry("driver/sdh", 0600, NULL);
>> +	sd_entry->read_proc = NULL;
>> +	sd_entry->write_proc = proc_write;
>> +	sd_entry->data = host;
>> +
>> +	return 0;
>> +
>> +out3:
>> +	free_dma(host->dma_ch);
>> +out2:
>> +	free_irq(host->irq, host);
>> +out1:
>> +	mmc_free_host(mmc);
>> + out:
>> +	return ret;
>> +}
>> +
>> +static int __devexit sdh_remove(struct platform_device *pdev) {
>> +	struct mmc_host *mmc = platform_get_drvdata(pdev);
>> +
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	if (mmc) {
>> +		struct sdh_host *host = mmc_priv(mmc);
>> +
>> +		mmc_remove_host(mmc);
>> +
>> +		sdh_stop_clock(host);
>> +		free_irq(host->irq, host);
>> +		free_dma(host->dma_ch);
>> +		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, 
>> +host->sg_dma);
>> +
>> +		mmc_free_host(mmc);
>> +	}
>> +	remove_proc_entry("driver/sdh", NULL);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int sdh_suspend(struct platform_device *dev, pm_message_t 
>> +state) {
>> +	struct mmc_host *mmc = platform_get_drvdata(dev);
>> +	int ret = 0;
>> +
>> +	if (mmc)
>> +		ret = mmc_suspend_host(mmc, state);
>> +
>> +	return ret;
>> +}
>> +
>> +static int sdh_resume(struct platform_device *dev) {
>> +	struct mmc_host *mmc = platform_get_drvdata(dev);
>> +	int ret = 0;
>> +
>> +	if (mmc)
>> +		ret = mmc_resume_host(mmc);
>> +
>> +	return ret;
>> +}
>> +#else
>> +#define sdh_suspend	NULL
>> +#define sdh_resume	NULL
>> +#endif
>> +
>> +static struct platform_driver sdh_driver = {
>> +	.probe		= sdh_probe,
>> +	.remove		= sdh_remove,
>> +	.suspend	= sdh_suspend,
>> +	.resume		= sdh_resume,
>> +	.driver		= {
>> +		.name	= DRIVER_NAME,
>> +	},
>> +};
>> +
>> +static int __init sdh_init(void)
>> +{
>> +	return platform_driver_register(&sdh_driver);
>> +}
>> +
>> +static void __exit sdh_exit(void)
>> +{
>> +	platform_driver_unregister(&sdh_driver);
>> +}
>> +
>> +module_init(sdh_init);
>> +module_exit(sdh_exit);
>> +
>> +MODULE_DESCRIPTION("Blackfin Secure Digital Host Driver"); 
>> +MODULE_AUTHOR("Cliff Cai, Roy Huang"); MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists