[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <49E80457.5060403@kernel.org>
Date: Thu, 16 Apr 2009 21:23:51 -0700
From: Yinghai Lu <yinghai@...nel.org>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Suresh Siddha <suresh.b.siddha@...el.com>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Rusty Russell <rusty@...tcorp.com.au>,
Len Brown <lenb@...nel.org>,
Bjorn Helgaas <bjorn.helgaas@...com>,
Tony Luck <tony.luck@...el.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
linux-ia64@...r.kernel.org
Subject: [PATCH 6/9] irq: make io_apic_set_pci_routing to take device
Impact: so use dev_to_node later
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
Cc: linux-acpi@...r.kernel.org
Cc: Len Brown <lenb@...nel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@...com>
Cc: linux-ia64@...r.kernel.org
Cc: Tony Luck <tony.luck@...el.com>
---
arch/ia64/kernel/acpi.c | 5 +++--
arch/x86/include/asm/io_apic.h | 4 ++--
arch/x86/include/asm/mpspec.h | 4 +++-
arch/x86/kernel/acpi/boot.c | 8 ++++----
arch/x86/kernel/apic/io_apic.c | 3 ++-
drivers/acpi/pci_irq.c | 5 +++--
drivers/char/hpet.c | 4 ++--
drivers/pnp/pnpacpi/rsparser.c | 2 +-
include/linux/acpi.h | 2 +-
9 files changed, 21 insertions(+), 16 deletions(-)
Index: linux-2.6/arch/ia64/kernel/acpi.c
===================================================================
--- linux-2.6.orig/arch/ia64/kernel/acpi.c
+++ linux-2.6/arch/ia64/kernel/acpi.c
@@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void)
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
return gsi;
@@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct
fadt = (struct acpi_table_fadt *)fadt_header;
- acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+ acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_LOW);
return 0;
}
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -154,8 +154,8 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
- int edge_level, int active_high_low);
+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -72,7 +72,9 @@ extern void mp_register_ioapic(int id, u
extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
-extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+struct device;
+extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
+ int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -522,7 +522,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -539,7 +539,7 @@ int acpi_register_gsi(u32 gsi, int trigg
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
@@ -1158,7 +1158,7 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
int ioapic_pin;
@@ -1253,7 +1253,7 @@ int mp_register_gsi(u32 gsi, int trigger
}
}
#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+ io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3851,7 +3851,8 @@ int __init io_apic_get_version(int ioapi
}
#endif
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
Index: linux-2.6/drivers/acpi/pci_irq.c
===================================================================
--- linux-2.6.orig/drivers/acpi/pci_irq.c
+++ linux-2.6/drivers/acpi/pci_irq.c
@@ -401,7 +401,8 @@ int acpi_pci_irq_enable(struct pci_dev *
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
- acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+ acpi_register_gsi(&dev->dev, dev->irq,
+ ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
return 0;
} else {
@@ -410,7 +411,7 @@ int acpi_pci_irq_enable(struct pci_dev *
}
}
- rc = acpi_register_gsi(gsi, triggering, polarity);
+ rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
pin_name(pin));
Index: linux-2.6/drivers/char/hpet.c
===================================================================
--- linux-2.6.orig/drivers/char/hpet.c
+++ linux-2.6/drivers/char/hpet.c
@@ -224,7 +224,7 @@ static void hpet_timer_set_irq(struct hp
break;
}
- gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE,
+ gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
if (gsi > 0)
break;
@@ -939,7 +939,7 @@ static acpi_status hpet_resources(struct
irqp = &res->data.extended_irq;
for (i = 0; i < irqp->interrupt_count; i++) {
- irq = acpi_register_gsi(irqp->interrupts[i],
+ irq = acpi_register_gsi(NULL, irqp->interrupts[i],
irqp->triggering, irqp->polarity);
if (irq < 0)
return AE_ERROR;
Index: linux-2.6/drivers/pnp/pnpacpi/rsparser.c
===================================================================
--- linux-2.6.orig/drivers/pnp/pnpacpi/rsparser.c
+++ linux-2.6/drivers/pnp/pnpacpi/rsparser.c
@@ -123,7 +123,7 @@ static void pnpacpi_parse_allocated_irqr
}
flags = irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(gsi, triggering, polarity);
+ irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (irq >= 0)
pcibios_penalize_isa_irq(irq, 1);
else
Index: linux-2.6/include/linux/acpi.h
===================================================================
--- linux-2.6.orig/include/linux/acpi.h
+++ linux-2.6/include/linux/acpi.h
@@ -118,7 +118,7 @@ extern int pci_mmcfg_config_num;
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
-int acpi_register_gsi (u32 gsi, int triggering, int polarity);
+int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists