| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <49E99303.50004@kernel.org>
Date: Sat, 18 Apr 2009 01:44:51 -0700
From: Yinghai Lu <yinghai@...nel.org>
To: Jesse Barnes <jbarnes@...tuousgeek.org>,
Matthew Wilcox <matthew@....cx>, Ingo Molnar <mingo@...e.hu>
CC: linux-pci@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/3] pci: don't assume pref memio are 64bit -v2
one system with 4g installed ( there is 1g hole)
when 4G installed.
BIOS put ACPI etc need the hole
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffae000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
so in kernel resource will be reserved for 0xbffa0000 - 0xbfff0000 for ACPI
0x100000 - 0xbffa0000 for RAM...
and BIOS set
[ 0.240007] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbdf00000-0xddefffff]
[ 0.237102] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
that is conflict with reserved res. so it can not be reserved Kernel.
then Kernel try to get range from 0x140000000 ( above the RAM, 5G and above 4g)
and set let the bridge to use it, and ATI cards to use it.
but the problem is that ATI only support 32bit ...
we should not assign 64bit range to pci device that only take 32bit pref
try to set PCI_PREF_RANGE_TYPE_64 in 64bit resource of pci_device (besides in pci_bridge),
and make the bus resource only have that bit set when all device under that do support
64bit pref mem
then use that flag to decide the max limit for find/request.
[Impact: do assign wrong range to device that doesn't support it]
v2: fix b_res->flags and logic and passing result.
Reported-and-tested-by: Yannick <yannick.roehlly@...e.fr>
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
drivers/pci/bus.c | 8 +++++++-
drivers/pci/probe.c | 8 ++++++--
drivers/pci/setup-bus.c | 40 +++++++++++++++++++++++++++++++---------
3 files changed, 44 insertions(+), 12 deletions(-)
Index: linux-2.6/drivers/pci/bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/bus.c
+++ linux-2.6/drivers/pci/bus.c
@@ -41,9 +41,15 @@ pci_bus_alloc_resource(struct pci_bus *b
void *alignf_data)
{
int i, ret = -ENOMEM;
+ resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
+ /* don't allocate too high if the pref mem doesn't support 64bit*/
+ if ((res->flags & (IORESOURCE_PREFETCH | PCI_PREF_RANGE_TYPE_64)) ==
+ IORESOURCE_PREFETCH)
+ max = 0xffffffff;
+
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *r = bus->resource[i];
if (!r)
@@ -62,7 +68,7 @@ pci_bus_alloc_resource(struct pci_bus *b
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
r->start ? : min,
- -1, align,
+ max, align,
alignf, alignf_data);
if (ret == 0)
break;
Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev,
res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
if (type == pci_bar_io) {
l &= PCI_BASE_ADDRESS_IO_MASK;
- mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
+ mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
} else {
l &= PCI_BASE_ADDRESS_MEM_MASK;
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
@@ -237,6 +237,9 @@ int __pci_read_base(struct pci_dev *dev,
dev_printk(KERN_DEBUG, &dev->dev,
"reg %x 64bit mmio: %pR\n", pos, res);
}
+
+ if (res->flags & IORESOURCE_PREFETCH)
+ res->flags |= PCI_PREF_RANGE_TYPE_64;
} else {
sz = pci_size(l, sz, mask);
@@ -362,7 +365,8 @@ void __devinit pci_read_bridge_bases(str
}
}
if (base <= limit) {
- res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
+ IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: %pR\n",
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -143,6 +143,7 @@ static void pci_setup_bridge(struct pci_
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
u32 l, bu, lu, io_upper16;
+ int pref_mem64;
if (pci_is_enabled(bridge))
return;
@@ -198,16 +199,22 @@ static void pci_setup_bridge(struct pci_
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit. */
+ pref_mem64 = 0;
bu = lu = 0;
pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+ int width = 8;
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- bu = upper_32_bits(region.start);
- lu = upper_32_bits(region.end);
- dev_info(&bridge->dev, " PREFETCH window: %#016llx-%#016llx\n",
- (unsigned long long)region.start,
- (unsigned long long)region.end);
+ if (bus->resource[2]->flags & PCI_PREF_RANGE_TYPE_64) {
+ pref_mem64 = 1;
+ bu = upper_32_bits(region.start);
+ lu = upper_32_bits(region.end);
+ width = 16;
+ }
+ dev_info(&bridge->dev, " PREFETCH window: %#0*llx-%#0*llx\n",
+ width, (unsigned long long)region.start,
+ width, (unsigned long long)region.end);
}
else {
l = 0x0000fff0;
@@ -215,9 +222,11 @@ static void pci_setup_bridge(struct pci_
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
- /* Set the upper 32 bits of PREF base & limit. */
- pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
- pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+ if (pref_mem64) {
+ /* Set the upper 32 bits of PREF base & limit. */
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
+ pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+ }
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
@@ -255,8 +264,11 @@ static void pci_bridge_check_ranges(stru
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
}
- if (pmem)
+ if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+ b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+ }
}
/* Helper function for sizing routines: find first available
@@ -336,6 +348,7 @@ static int pbus_size_mem(struct pci_bus
resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
+ unsigned int mem64_mask = 0;
if (!b_res)
return 0;
@@ -344,6 +357,11 @@ static int pbus_size_mem(struct pci_bus
max_order = 0;
size = 0;
+ if (type & IORESOURCE_PREFETCH) {
+ mem64_mask = b_res->flags & PCI_PREF_RANGE_TYPE_64;
+ b_res->flags &= ~PCI_PREF_RANGE_TYPE_64;
+ }
+
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
@@ -372,6 +390,8 @@ static int pbus_size_mem(struct pci_bus
aligns[order] += align;
if (order > max_order)
max_order = order;
+ if (r->flags & IORESOURCE_PREFETCH)
+ mem64_mask &= r->flags & PCI_PREF_RANGE_TYPE_64;
}
}
@@ -396,6 +416,8 @@ static int pbus_size_mem(struct pci_bus
b_res->start = min_align;
b_res->end = size + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
+ if (type & IORESOURCE_PREFETCH)
+ b_res->flags |= mem64_mask;
return 1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists