Linux version 2.6.30-rc3-autokern1 (root@hs21a.ltc.austin.ibm.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Fri Apr 24 12:05:23 EDT 2009 Command line: console=tty0 console=ttyS1,19200 autobench_args: root=/dev/sda5 ABAT:1240589482 loglevel=8 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffbce40 (usable) BIOS-e820: 00000000cffbce40 - 00000000cffd0000 (ACPI data) BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000430000000 (usable) DMI 2.4 present. last_pfn = 0x430000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask 3F80000000 write-back 1 base 0080000000 mask 3FC0000000 write-back 2 base 00C0000000 mask 3FF0000000 write-back 3 base 0100000000 mask 3F00000000 write-back 4 base 0200000000 mask 3E00000000 write-back 5 base 0400000000 mask 3C00000000 write-back 6 disabled 7 disabled e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcffbc max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000cffbc000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cffbc000 page 4k kernel direct mapping tables up to cffbc000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000430000000 0100000000 - 0430000000 page 2M kernel direct mapping tables up to 430000000 @ c000-1e000 RAMDISK: 37d0d000 - 37fefae7 ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM ) ACPI: XSDT 00000000cffcff00 0003C (v01 IBM SERBLADE 00001001 IBM 45444F43) ACPI: FACP 00000000cffcfe40 00084 (v02 IBM SERBLADE 00001001 IBM 45444F43) ACPI: DSDT 00000000cffbce6b 02772 (v02 IBM SERBLADE 00001000 INTL 20060707) ACPI: FACS 00000000cffcfd00 00040 ACPI: APIC 00000000cffcfd80 00090 (v01 IBM SERBLADE 00001001 IBM 45444F43) ACPI: MCFG 00000000cffcfd40 0003C (v01 IBM SERBLADE 00001001 IBM 45444F43) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000430000000 Bootmem setup node 0 0000000000000000-0000000430000000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000100000 - 0000000000185fff] pages 86 (8 early reservations) ==> bootmem [0000000000 - 0430000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000791b4c] TEXT DATA BSS ==> [0000200000 - 0000791b4c] #3 [0037d0d000 - 0037fefae7] RAMDISK ==> [0037d0d000 - 0037fefae7] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000] #5 [0000792000 - 00007922a4] BRK ==> [0000792000 - 00007922a4] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000] found SMP MP-table at [ffff88000009d140] 9d140 [ffffe20000000000-ffffe2000ebfffff] PMD -> [ffff880028200000-ffff8800363fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00430000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000cffbc 0: 0x00100000 -> 0x00430000 On node 0 totalpages: 4194137 DMA zone: 56 pages used for memmap DMA zone: 1544 pages reserved DMA zone: 2397 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833524 pages, LIFO batch:31 Normal zone: 45696 pages used for memmap Normal zone: 3296640 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x588 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 13, version 0, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff880028034000, static data 67680 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4132561 Policy zone: Normal Kernel command line: console=tty0 console=ttyS1,19200 autobench_args: root=/dev/sda5 ABAT:1240589482 loglevel=8 Initializing CPU#0 NR_IRQS:1280 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 3000.579 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS1] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 16469744k/17563648k available (2856k kernel code, 787100k absent, 306804k reserved, 1462k data, 472k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.15 BogoMIPS (lpj=12002316) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b Booting processor 1 APIC 0x6 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.69 BogoMIPS (lpj=12001396) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/0x6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) CPU1: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.69 BogoMIPS (lpj=12001389) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM1) CPU2: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x7 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.68 BogoMIPS (lpj=12001366) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/0x7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM1) CPU3: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (24003.23 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0,2 level MC groups: 0 2 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU1 attaching sched-domain: domain 0: span 1,3 level MC groups: 1 3 domain 1: span 0-3 level CPU groups: 1,3 0,2 CPU2 attaching sched-domain: domain 0: span 0,2 level MC groups: 2 0 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU3 attaching sched-domain: domain 0: span 1,3 level MC groups: 3 1 domain 1: span 0-3 level CPU groups: 1,3 0,2 net_namespace: 1704 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e0ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: reg 10 64bit mmio: [0xfe700000-0xfe7003ff] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x2200-0x221f] pci 0000:00:1d.1: reg 20 io port: [0x2600-0x261f] pci 0000:00:1d.2: reg 20 io port: [0x2800-0x281f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9000000-0xf90003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0x2a00-0x2a0f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:07:00.3: PME# supported from D0 D3hot D3cold pci 0000:07:00.3: PME# disabled pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:09:01.0: PME# supported from D0 D3hot D3cold pci 0000:09:01.0: PME# disabled pci 0000:00:05.0: bridge io port: [0x5000-0xffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:06.0: bridge 32bit mmio: [0xda000000-0xdcffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:03:00.0: bridge 32bit mmio: [0xda000000-0xdcffffff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:07.0: bridge 32bit mmio: [0xd7000000-0xd9ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xd8000000-0xd9ffffff] pci 0000:06:00.0: PME# supported from D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:05:00.0: bridge 32bit mmio: [0xd7000000-0xd9ffffff] pci 0000:02:00.0: reg 10 io port: [0x4000-0x40ff] pci 0000:02:00.0: reg 14 64bit mmio: [0xdeffc000-0xdeffffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdefe0000-0xdefeffff] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x1fffff] pci 0000:02:00.0: supports D1 D2 pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xdd000000-0xdeffffff] pci 0000:01:01.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:01.0: reg 14 io port: [0x3000-0x30ff] pci 0000:01:01.0: reg 18 32bit mmio: [0xf8000000-0xf800ffff] pci 0000:01:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:01.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf8ffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCIX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCI9.PCIA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCI9.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] ACPI: PCI Interrupt Link [LP00] (IRQs *5) ACPI: PCI Interrupt Link [LP01] (IRQs *7) ACPI: PCI Interrupt Link [LP02] (IRQs *11) ACPI: PCI Interrupt Link [LP03] (IRQs *7) ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP05] (IRQs *7) ACPI: PCI Interrupt Link [LP06] (IRQs *11) ACPI: PCI Interrupt Link [LP07] (IRQs *7) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NET: Registered protocol family 8 NET: Registered protocol family 20 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xc00-0xc1f has been reserved system 00:01: ioport range 0xc60-0xc67 has been reserved system 00:0a: ioport range 0xc28-0xc28 has been reserved system 00:0a: ioport range 0xc2c-0xc2c has been reserved system 00:0b: ioport range 0x400-0x43f has been reserved system 00:0b: ioport range 0x440-0x45f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0xc60-0xc7f could not be reserved system 00:0b: ioport range 0xce0-0xcff could not be reserved system 00:0b: ioport range 0x580-0x5ff has been reserved system 00:0b: ioport range 0xc30-0xc30 has been reserved system 00:0b: ioport range 0xc34-0xc34 has been reserved system 00:0b: ioport range 0xc40-0xc5f has been reserved system 00:0b: ioport range 0xca8-0xca8 has been reserved system 00:0b: ioport range 0xcac-0xcac has been reserved system 00:0b: ioport range 0xcb0-0xcb0 has been reserved system 00:0b: ioport range 0xcb4-0xcb4 has been reserved system 00:0b: ioport range 0xcc0-0xcdf has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0b: iomem range 0xfe000000-0xfe01ffff has been reserved system 00:0b: iomem range 0xfe020000-0xfe6fffff has been reserved system 00:0b: iomem range 0xfe700400-0xfebfffff has been reserved system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved pci 0000:09:00.0: PCI bridge, secondary bus 0000:0b pci 0000:09:00.0: IO window: disabled pci 0000:09:00.0: MEM window: disabled pci 0000:09:00.0: PREFETCH window: disabled pci 0000:09:01.0: PCI bridge, secondary bus 0000:0a pci 0000:09:01.0: IO window: disabled pci 0000:09:01.0: MEM window: disabled pci 0000:09:01.0: PREFETCH window: disabled pci 0000:07:00.0: PCI bridge, secondary bus 0000:09 pci 0000:07:00.0: IO window: disabled pci 0000:07:00.0: MEM window: disabled pci 0000:07:00.0: PREFETCH window: disabled pci 0000:07:00.3: PCI bridge, secondary bus 0000:08 pci 0000:07:00.3: IO window: disabled pci 0000:07:00.3: MEM window: disabled pci 0000:07:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:07 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:0f pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:0e pci 0000:00:05.0: IO window: 0x5000-0xffff pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 pci 0000:03:00.0: IO window: disabled pci 0000:03:00.0: MEM window: 0xda000000-0xdcffffff pci 0000:03:00.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xda000000-0xdcffffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 pci 0000:05:00.0: IO window: disabled pci 0000:05:00.0: MEM window: 0xd7000000-0xd9ffffff pci 0000:05:00.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: 0xd7000000-0xd9ffffff pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x4000-0x4fff pci 0000:00:1c.0: MEM window: 0xdd000000-0xdeffffff pci 0000:00:1c.0: PREFETCH window: 0x000000d1000000-0x000000d11fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xf8000000-0xf8ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:02.0: setting latency timer to 64 pci 0000:07:00.0: setting latency timer to 64 pci 0000:09:00.0: setting latency timer to 64 pci 0000:09:01.0: setting latency timer to 64 pci 0000:07:00.3: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:03:00.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:05:00.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:07: resource 0 mem: [0x0-0x0] pci_bus 0000:07: resource 1 mem: [0x0-0x0] pci_bus 0000:07: resource 2 mem: [0x0-0x0] pci_bus 0000:07: resource 3 mem: [0x0-0x0] pci_bus 0000:09: resource 0 mem: [0x0-0x0] pci_bus 0000:09: resource 1 mem: [0x0-0x0] pci_bus 0000:09: resource 2 mem: [0x0-0x0] pci_bus 0000:09: resource 3 mem: [0x0-0x0] pci_bus 0000:0b: resource 0 mem: [0x0-0x0] pci_bus 0000:0b: resource 1 mem: [0x0-0x0] pci_bus 0000:0b: resource 2 mem: [0x0-0x0] pci_bus 0000:0b: resource 3 mem: [0x0-0x0] pci_bus 0000:0a: resource 0 mem: [0x0-0x0] pci_bus 0000:0a: resource 1 mem: [0x0-0x0] pci_bus 0000:0a: resource 2 mem: [0x0-0x0] pci_bus 0000:0a: resource 3 mem: [0x0-0x0] pci_bus 0000:08: resource 0 mem: [0x0-0x0] pci_bus 0000:08: resource 1 mem: [0x0-0x0] pci_bus 0000:08: resource 2 mem: [0x0-0x0] pci_bus 0000:08: resource 3 mem: [0x0-0x0] pci_bus 0000:0f: resource 0 mem: [0x0-0x0] pci_bus 0000:0f: resource 1 mem: [0x0-0x0] pci_bus 0000:0f: resource 2 mem: [0x0-0x0] pci_bus 0000:0f: resource 3 mem: [0x0-0x0] pci_bus 0000:0c: resource 0 mem: [0x0-0x0] pci_bus 0000:0c: resource 1 mem: [0x0-0x0] pci_bus 0000:0c: resource 2 mem: [0x0-0x0] pci_bus 0000:0c: resource 3 mem: [0x0-0x0] pci_bus 0000:0e: resource 0 io: [0x5000-0xffff] pci_bus 0000:0e: resource 1 mem: [0x0-0x0] pci_bus 0000:0e: resource 2 mem: [0x0-0x0] pci_bus 0000:0e: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0xda000000-0xdcffffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0xda000000-0xdcffffff] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 mem: [0x0-0x0] pci_bus 0000:05: resource 1 mem: [0xd7000000-0xd9ffffff] pci_bus 0000:05: resource 2 mem: [0x0-0x0] pci_bus 0000:05: resource 3 mem: [0x0-0x0] pci_bus 0000:06: resource 0 mem: [0x0-0x0] pci_bus 0000:06: resource 1 mem: [0xd7000000-0xd9ffffff] pci_bus 0000:06: resource 2 mem: [0x0-0x0] pci_bus 0000:06: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] pci_bus 0000:02: resource 1 mem: [0xdd000000-0xdeffffff] pci_bus 0000:02: resource 2 mem: [0xd1000000-0xd11fffff] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf8ffffff] pci_bus 0000:01: resource 2 mem: [0xf0000000-0xf7ffffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... rootfs image is initramfs; unpacking... Freeing initrd memory: 2954k freed audit: initializing netlink socket (disabled) type=2000 audit(1240575343.665:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32173 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:01.0: Boot video device pcieport-driver 0000:00:02.0: irq 48 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: irq 50 for MSI/MSI-X pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: irq 51 for MSI/MSI-X pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: irq 52 for MSI/MSI-X pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: irq 53 for MSI/MSI-X pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 54 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:09:00.0: irq 55 for MSI/MSI-X pcieport-driver 0000:09:00.0: setting latency timer to 64 pcieport-driver 0000:09:01.0: irq 56 for MSI/MSI-X pcieport-driver 0000:09:01.0: setting latency timer to 64 Firmware did not grant requested _OSC control aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:09:00.0:pcie22: AER service couldn't init device: no _OSC support Firmware did not grant requested _OSC control aer 0000:09:01.0:pcie22: AER service couldn't init device: no _OSC support Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 mptsas 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mptbase: ioc0: Initiating bringup ioc0: LSISAS1064E B1: Capabilities={Initiator} mptsas 0000:02:00.0: setting latency timer to 64 scsi0 : ioc0: LSISAS1064E B1, FwRev=01160000h, Ports=1, MaxQ=286, IRQ=16 scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2036RC T107 PQ: 0 ANSI: 5 Fusion MPT misc device (ioctl) driver 3.04.07 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT LAN driver 3.04.07 mptlan: ioc0: PortNum=0, ProtocolFlags=09h (ItlB) mptlan: ioc0: Hmmm... LAN protocol seems to be disabled on this adapter port! PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP bic registered NET: Registered protocol family 17 Freeing unused kernel memory: 472k freed Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block dehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver evice nodes. Loehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ading ehci-hcd.kehci_hcd 0000:00:1d.7: setting latency timer to 64 o module ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected Loading ohci-hcdohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver .ko module uhci_hcd: USB Universal Host Controller Interface driver Loading uhci-hcduhci_hcd 0000:00:1d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 .ko module uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002600 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Loading mbcache.ko module LoadiUniform Multi-Platform E-IDE driver ng jbd.ko moduleide-gd driver 1.18 Loading ext3.kdevice-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com o module Loading ide-core.ko moNET: Registered protocol family 10 dule Loading idlo: Disabled Privacy Extensions e-gd_mod.ko moduusb 1-3: new high speed USB device using ehci_hcd and address 2 le Loading ide-lp: driver loaded but no devices found gd_mod.ko modulei2c /dev entries driver insmod: error inserting '/lib/RPC: Registered udp transport module. ide-gd_mod.ko': RPC: Registered tcp transport module. -1 File exists Loading dm-mod.kinput: Power Button (FF) as /class/input/input0 o module Loadinusb 1-3: configuration #1 chosen from 1 choice g dm-log.ko moduhub 1-3:1.0: USB hub found le Loading dm-rhub 1-3:1.0: 2 ports detected egion-hash.ko moACPI: Power Button (FF) [PWRF] dule Loading dmBroadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.0 (April 2, 2009) -region-hash.ko bnx2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 module insmod: error inserting '/lib/dm-region-hash.ko': -1 File exists Loading joydev.ko module Loading ipv6.ko module Loading parport.ko module Loading parport_pc.ko module Loading lp.ko module Loading autofs4.ko module Loading i2c-core.ko module Loading i2c-dev.ko module Loading i2c-dev.ko module insmod: error inserting '/lib/i2c-dev.ko': -1 File exists Loading i2c-core.ko module insmod: error inserting '/lib/i2c-core.ko': -1 File exists Loading sunrpc.ko module Loading pcmcia_core.ko module Loading pcmcia.ko module Loading pcmcia.ko module insmod: error inserting '/lib/pcmcia.ko': -1 File exists Loading rsrc_nonstatic.ko module Loading yenta_socket.ko module Loading dm-mirror.ko module Loading dm-mirror.ko module insmod: error inserting '/lib/dm-mirror.ko': -1 File exists Loading dm-mod.ko module insmod: error inserting '/lib/dm-mod.ko': -1 File exists Loading button.ko module Loadingbnx2 0000:04:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw battery.ko module Loading ac.ko module Loading bnx2.ko module bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw" bnx2 0000:04:00.0: PCI INT A disabled bnx2: probe of 0000:04:00.0 failed with error -2 bnx2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bnx2 0000:06:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw" bnx2 0000:06:00.0: PCI INT A disabled bnx2: probe of 0000:06:00.0 failed with error -2 Loading usb-storInitializing USB Mass Storage driver... age.ko module usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Waiting for driver initialization. Loading usb-storage.ko module insmod: error inserting '/lib/usb-storage.ko': -1 File exists Waiting for driver initialization. Loading uhci-hcdDriver 'sd' needs updating - please use bus_type methods .ko module insmod: error inserting '/lib/uhci-hsd 0:0:0:0: [sda] 71096640 512-byte hardware sectors: (36.4 GB/33.9 GiB) cd.ko': -1 File sd 0:0:0:0: [sda] Write Protect is off exists Loading sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08 ohci-hcd.ko modusd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA le insmod: error inserting '/lib/ohci-hcd.ko': -1 File exists sda:Loading ehci-hcd.ko module insm sda1od: error insert sda2ing '/lib/ehci-h sda3cd.ko': -1 File sda4exists Loading sd 0:0:0:0: [sda] Attached SCSI disk Scanning and configuring dmraid supported devices Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to Red Hat Enterprise Linux Server Press 'I' to enter interactive startup. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Setting clock (localtime): Fri Apr 24 08:16:33 EDT 2009 [ OK ] Starting udev: [ OK ] Loading default keymap (us): [ OK ] Setting hostname hs21a.ltc.austin.ibm.com: [ OK ] raidautorun: failed to open /dev/md0: No such device or address No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda5 /dev/sda5: Superblock last mount time is in the future. FIXED. /dev/sda5: Superblock last write time is in the future. FIXED. /dev/sda5: clean, 156360/1602496 files, 1537096/3202951 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 5 Entering non-interactive startup Starting boot.loadmodules: [ OK ] Starting background readahead: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] floppy0: no floppy controllers found Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ][ OK ] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: [ OK ] Starting autofs: Starting automount: [ OK ] [ OK ] Starting acpi daemon: [ OK ] Starting sshd: [ OK ] Starting cups: [ OK ] Starting xinetd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting background readahead: [ OK ] Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting smartd: [ OK ]