[ 0.000000] BIOS EBDA/lowmem at: 0009a400/0009a400 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] Command line: root=/dev/md0 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a400 (usable) [ 0.000000] BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff40000 (usable) [ 0.000000] BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xcff40 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009a400 (usable) [ 0.000000] modified: 000000000009a400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff40000 (usable) [ 0.000000] modified: 00000000cff40000 - 00000000cff4e000 (ACPI data) [ 0.000000] modified: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff40000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff40000 page 4k [ 0.000000] kernel direct mapping tables up to cff40000 @ 10000-16000 [ 0.000000] last_map_addr: cff40000 end: cff40000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] last_map_addr: 130000000 end: 130000000 [ 0.000000] RAMDISK: 3781d000 - 37fef341 [ 0.000000] ACPI: RSDP 000FB140, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFF40000, 0038 (r1 A_M_I_ OEMRSDT 6000826 MSFT 97) [ 0.000000] ACPI: FACP CFF40200, 0084 (r2 A_M_I_ OEMFACP 6000826 MSFT 97) [ 0.000000] ACPI: DSDT CFF405D0, 8586 (r1 A0754 A0754001 1 INTL 20060113) [ 0.000000] ACPI: FACS CFF4E000, 0040 [ 0.000000] ACPI: APIC CFF40390, 0078 (r1 A_M_I_ OEMAPIC 6000826 MSFT 97) [ 0.000000] ACPI: MCFG CFF40410, 003C (r1 A_M_I_ OEMMCFG 6000826 MSFT 97) [ 0.000000] ACPI: OEMB CFF4E040, 0081 (r1 A_M_I_ AMI_OEM 6000826 MSFT 97) [ 0.000000] ACPI: HPET CFF48B60, 0038 (r1 A_M_I_ OEMHPET 6000826 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0] [ 0.000000] #3 [003781d000 - 0037fef341] RAMDISK ==> [003781d000 - 0037fef341] [ 0.000000] #4 [000009a400 - 0000100000] BIOS reserved ==> [000009a400 - 0000100000] [ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cff40 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048266 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2548 pages reserved [ 0.000000] DMA zone: 1374 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833400 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfec10000, GSI 24-279 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff40000 - 00000000cff4e000 [ 0.000000] PM: Registered nosave memory: 00000000cff4e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028694 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2405.288 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] allocated 49807360 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 3983592k/4980736k available (4760k kernel code, 787672k absent, 208636k reserved, 2540k data, 536k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.57 BogoMIPS (lpj=9621152) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.005352] ACPI: Checking initramfs for custom DSDT [ 0.292043] Setting APIC routing to flat [ 0.296304] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.335987] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.336001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4810.88 BogoMIPS (lpj=9621769) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.420547] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.420567] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.424109] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4810.91 BogoMIPS (lpj=9621832) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.512562] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.512581] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.516076] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4810.91 BogoMIPS (lpj=9621824) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.604518] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.604537] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.608025] Brought up 4 CPUs [ 0.608028] Total of 4 processors activated (19243.28 BogoMIPS). [ 0.608081] CPU0 attaching sched-domain: [ 0.608083] domain 0: span 0-1 level MC [ 0.608085] groups: 0 1 [ 0.608088] domain 1: span 0-3 level CPU [ 0.608089] groups: 0-1 2-3 [ 0.608093] CPU1 attaching sched-domain: [ 0.608094] domain 0: span 0-1 level MC [ 0.608096] groups: 1 0 [ 0.608098] domain 1: span 0-3 level CPU [ 0.608099] groups: 0-1 2-3 [ 0.608102] CPU2 attaching sched-domain: [ 0.608103] domain 0: span 2-3 level MC [ 0.608105] groups: 2 3 [ 0.608107] domain 1: span 0-3 level CPU [ 0.608108] groups: 2-3 0-1 [ 0.608111] CPU3 attaching sched-domain: [ 0.608113] domain 0: span 2-3 level MC [ 0.608114] groups: 3 2 [ 0.608116] domain 1: span 0-3 level CPU [ 0.608118] groups: 2-3 0-1 [ 0.608212] net_namespace: 1400 bytes [ 0.608212] Booting paravirtualized kernel on bare hardware [ 0.608239] Time: 13:51:14 Date: 04/24/09 [ 0.608239] regulator: core version 0.5 [ 0.608239] NET: Registered protocol family 16 [ 0.608239] ACPI: bus type pci registered [ 0.608239] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.608239] PCI: Not using MMCONFIG. [ 0.608239] PCI: Using configuration type 1 for base access [ 0.608756] ACPI: EC: Look up EC in DSDT [ 0.621721] ACPI: Interpreter enabled [ 0.621724] ACPI: (supports S0 S1 S3 S4 S5) [ 0.621740] ACPI: Using IOAPIC for interrupt routing [ 0.621791] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.624005] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.632415] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.640304] ACPI: No dock devices found. [ 0.640359] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.640437] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.640439] pci 0000:00:01.0: PME# disabled [ 0.640498] pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f] [ 0.640550] pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f] [ 0.640603] pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f] [ 0.640658] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe5ffc00-0xfe5fffff] [ 0.640690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.640694] pci 0000:00:1a.7: PME# disabled [ 0.640728] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe5f8000-0xfe5fbfff] [ 0.640751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.640754] pci 0000:00:1b.0: PME# disabled [ 0.640791] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.640794] pci 0000:00:1c.0: PME# disabled [ 0.640833] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.640836] pci 0000:00:1c.2: PME# disabled [ 0.640874] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.640877] pci 0000:00:1c.3: PME# disabled [ 0.640915] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.640918] pci 0000:00:1c.4: PME# disabled [ 0.640957] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.640959] pci 0000:00:1c.5: PME# disabled [ 0.641006] pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f] [ 0.641058] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f] [ 0.641110] pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f] [ 0.641165] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe5ff800-0xfe5ffbff] [ 0.641197] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.641200] pci 0000:00:1d.7: PME# disabled [ 0.641298] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.641301] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.641344] pci 0000:00:1f.2: reg 10 io port: [0x8c00-0x8c07] [ 0.641348] pci 0000:00:1f.2: reg 14 io port: [0x8880-0x8883] [ 0.641353] pci 0000:00:1f.2: reg 18 io port: [0x8800-0x8807] [ 0.641357] pci 0000:00:1f.2: reg 1c io port: [0x8480-0x8483] [ 0.641362] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x841f] [ 0.641366] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe5fe800-0xfe5fefff] [ 0.641378] pci 0000:00:1f.2: PME# supported from D3hot [ 0.641380] pci 0000:00:1f.2: PME# disabled [ 0.641403] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe5ff400-0xfe5ff4ff] [ 0.641415] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.641452] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.641459] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe6e0000-0xfe6effff] [ 0.641464] pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff] [ 0.641471] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe6c0000-0xfe6dffff] [ 0.641477] pci 0000:01:00.0: supports D1 D2 [ 0.641504] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe6fc000-0xfe6fffff] [ 0.641525] pci 0000:01:00.1: supports D1 D2 [ 0.641563] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.641565] pci 0000:00:01.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.641568] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.641605] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.641665] pci 0000:05:00.0: supports D1 [ 0.641667] pci 0000:05:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.641671] pci 0000:05:00.0: PME# disabled [ 0.641723] pci 0000:05:00.1: reg 10 64bit mmio: [0xfeaffc00-0xfeaffc7f] [ 0.641745] pci 0000:05:00.1: supports D1 [ 0.641746] pci 0000:05:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.641750] pci 0000:05:00.1: PME# disabled [ 0.641808] pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.641813] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.641970] pci 0000:05:00.1: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.642038] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.642045] pci 0000:04:00.0: reg 18 io port: [0xd800-0xd8ff] [ 0.642068] pci 0000:04:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff] [ 0.642078] pci 0000:04:00.0: supports D1 D2 [ 0.642080] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.642084] pci 0000:04:00.0: PME# disabled [ 0.642119] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.642122] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.642177] pci 0000:03:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.642184] pci 0000:03:00.0: reg 18 io port: [0xc800-0xc8ff] [ 0.642208] pci 0000:03:00.0: reg 30 32bit mmio: [0xfe8c0000-0xfe8dffff] [ 0.642218] pci 0000:03:00.0: supports D1 D2 [ 0.642219] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.642223] pci 0000:03:00.0: PME# disabled [ 0.642258] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.642261] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.642304] pci 0000:02:00.0: reg 10 io port: [0xbc00-0xbc07] [ 0.642311] pci 0000:02:00.0: reg 14 io port: [0xb880-0xb883] [ 0.642318] pci 0000:02:00.0: reg 18 io port: [0xb800-0xb807] [ 0.642325] pci 0000:02:00.0: reg 1c io port: [0xb480-0xb483] [ 0.642331] pci 0000:02:00.0: reg 20 io port: [0xb400-0xb40f] [ 0.642338] pci 0000:02:00.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff] [ 0.642355] pci 0000:02:00.0: supports D1 [ 0.642356] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.642360] pci 0000:02:00.0: PME# disabled [ 0.642399] pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff] [ 0.642402] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.642442] pci 0000:09:07.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.642448] pci 0000:09:07.0: reg 14 io port: [0xec00-0xec7f] [ 0.642478] pci 0000:09:07.0: supports D2 [ 0.642479] pci 0000:09:07.0: PME# supported from D2 D3hot D3cold [ 0.642483] pci 0000:09:07.0: PME# disabled [ 0.642515] pci 0000:00:1e.0: transparent bridge [ 0.642518] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.642520] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.642547] bus 00 -> node 0 [ 0.642552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.642746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.642836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.642969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.643059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.643149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT] [ 0.643241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.643330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.643419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.659862] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.659977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.660103] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.660216] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.660332] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.660446] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.660559] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.660672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.660782] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7A, should be 79 [20080926] [ 0.660808] ACPI: WMI: Mapper loaded [ 0.660843] SCSI subsystem initialized [ 0.660843] libata version 3.00 loaded. [ 0.660843] usbcore: registered new interface driver usbfs [ 0.660843] usbcore: registered new interface driver hub [ 0.660843] usbcore: registered new device driver usb [ 0.660843] PCI: Using ACPI for IRQ routing [ 0.676009] Bluetooth: Core ver 2.13 [ 0.676021] NET: Registered protocol family 31 [ 0.676021] Bluetooth: HCI device and connection manager initialized [ 0.676021] Bluetooth: HCI socket layer initialized [ 0.676021] NET: Registered protocol family 8 [ 0.676021] NET: Registered protocol family 20 [ 0.676029] NetLabel: Initializing [ 0.676030] NetLabel: domain hash size = 128 [ 0.676031] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.676042] NetLabel: unlabeled traffic allowed by default [ 0.676071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.676074] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.684053] AppArmor: AppArmor Filesystem Enabled [ 0.688007] Switched to high resolution mode on CPU 0 [ 0.688574] Switched to high resolution mode on CPU 3 [ 0.688597] Switched to high resolution mode on CPU 1 [ 0.688613] Switched to high resolution mode on CPU 2 [ 0.696008] pnp: PnP ACPI init [ 0.696015] ACPI: bus type pnp registered [ 0.698499] pnp: PnP ACPI: found 14 devices [ 0.698501] ACPI: ACPI bus type pnp unregistered [ 0.698509] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.698514] system 00:06: ioport range 0x290-0x297 has been reserved [ 0.698518] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.698520] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.698522] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.698524] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.698526] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.698528] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.698530] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved [ 0.698532] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.698534] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved [ 0.698535] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.698540] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.698542] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.698546] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.698553] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.698555] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.698557] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.698559] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 0.703203] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.703205] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.703208] pci 0000:00:01.0: MEM window: 0xfe600000-0xfe6fffff [ 0.703211] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.703214] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.703215] pci 0000:00:1c.0: IO window: disabled [ 0.703219] pci 0000:00:1c.0: MEM window: disabled [ 0.703222] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.703226] pci 0000:05:00.0: PCI bridge, secondary bus 0000:07 [ 0.703227] pci 0000:05:00.0: IO window: disabled [ 0.703234] pci 0000:05:00.0: MEM window: disabled [ 0.703238] pci 0000:05:00.0: PREFETCH window: disabled [ 0.703247] pci 0000:05:00.1: PCI bridge, secondary bus 0000:06 [ 0.703248] pci 0000:05:00.1: IO window: disabled [ 0.703254] pci 0000:05:00.1: MEM window: disabled [ 0.703259] pci 0000:05:00.1: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.703268] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.703269] pci 0000:00:1c.2: IO window: disabled [ 0.703272] pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff [ 0.703275] pci 0000:00:1c.2: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.703280] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.703282] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.703286] pci 0000:00:1c.3: MEM window: 0xfe900000-0xfe9fffff [ 0.703289] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.703293] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.703295] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.703299] pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe8fffff [ 0.703302] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.703306] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.703308] pci 0000:00:1c.5: IO window: 0xb000-0xbfff [ 0.703312] pci 0000:00:1c.5: MEM window: 0xfe700000-0xfe7fffff [ 0.703315] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.703319] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.703321] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.703325] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.703328] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.703338] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.703341] pci 0000:00:01.0: setting latency timer to 64 [ 0.703347] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.703350] pci 0000:00:1c.0: setting latency timer to 64 [ 0.703356] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.703359] pci 0000:00:1c.2: setting latency timer to 64 [ 0.703370] pci 0000:05:00.0: setting latency timer to 64 [ 0.703379] pci 0000:05:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.703383] pci 0000:05:00.1: setting latency timer to 64 [ 0.703391] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.703394] pci 0000:00:1c.3: setting latency timer to 64 [ 0.703399] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.703402] pci 0000:00:1c.4: setting latency timer to 64 [ 0.703407] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.703410] pci 0000:00:1c.5: setting latency timer to 64 [ 0.703415] pci 0000:00:1e.0: setting latency timer to 64 [ 0.703418] bus: 00 index 0 io port: [0x00-0xffff] [ 0.703419] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.703421] bus: 01 index 0 io port: [0xa000-0xafff] [ 0.703422] bus: 01 index 1 mmio: [0xfe600000-0xfe6fffff] [ 0.703424] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.703425] bus: 01 index 3 mmio: [0x0-0x0] [ 0.703426] bus: 08 index 0 mmio: [0x0-0x0] [ 0.703427] bus: 08 index 1 mmio: [0x0-0x0] [ 0.703429] bus: 08 index 2 mmio: [0xfdf00000-0xfdffffff] [ 0.703430] bus: 08 index 3 mmio: [0x0-0x0] [ 0.703431] bus: 05 index 0 mmio: [0x0-0x0] [ 0.703432] bus: 05 index 1 mmio: [0xfea00000-0xfeafffff] [ 0.703434] bus: 05 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.703435] bus: 05 index 3 mmio: [0x0-0x0] [ 0.703436] bus: 07 index 0 mmio: [0x0-0x0] [ 0.703437] bus: 07 index 1 mmio: [0x0-0x0] [ 0.703439] bus: 07 index 2 mmio: [0x0-0x0] [ 0.703440] bus: 07 index 3 mmio: [0x0-0x0] [ 0.703441] bus: 06 index 0 mmio: [0x0-0x0] [ 0.703442] bus: 06 index 1 mmio: [0x0-0x0] [ 0.703443] bus: 06 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.703444] bus: 06 index 3 mmio: [0x0-0x0] [ 0.703446] bus: 04 index 0 io port: [0xd000-0xdfff] [ 0.703447] bus: 04 index 1 mmio: [0xfe900000-0xfe9fffff] [ 0.703448] bus: 04 index 2 mmio: [0x0-0x0] [ 0.703449] bus: 04 index 3 mmio: [0x0-0x0] [ 0.703451] bus: 03 index 0 io port: [0xc000-0xcfff] [ 0.703452] bus: 03 index 1 mmio: [0xfe800000-0xfe8fffff] [ 0.703453] bus: 03 index 2 mmio: [0x0-0x0] [ 0.703454] bus: 03 index 3 mmio: [0x0-0x0] [ 0.703456] bus: 02 index 0 io port: [0xb000-0xbfff] [ 0.703457] bus: 02 index 1 mmio: [0xfe700000-0xfe7fffff] [ 0.703458] bus: 02 index 2 mmio: [0x0-0x0] [ 0.703459] bus: 02 index 3 mmio: [0x0-0x0] [ 0.703461] bus: 09 index 0 io port: [0xe000-0xefff] [ 0.703462] bus: 09 index 1 mmio: [0xfeb00000-0xfebfffff] [ 0.703463] bus: 09 index 2 mmio: [0x0-0x0] [ 0.703465] bus: 09 index 3 io port: [0x00-0xffff] [ 0.703466] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.703473] NET: Registered protocol family 2 [ 0.736045] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.736376] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.737762] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.738267] TCP: Hash tables configured (established 262144 bind 65536) [ 0.738269] TCP reno registered [ 0.748107] NET: Registered protocol family 1 [ 0.748208] checking if image is initramfs... it is [ 1.319781] Freeing initrd memory: 8008k freed [ 1.322676] audit: initializing netlink socket (disabled) [ 1.322692] type=2000 audit(1240581074.320:1): initialized [ 1.329630] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.330619] VFS: Disk quotas dquot_6.5.1 [ 1.330659] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.331092] fuse init (API version 7.10) [ 1.331148] msgmni has been set to 7797 [ 1.331295] alg: No test for stdrng (krng) [ 1.331306] io scheduler noop registered [ 1.331308] io scheduler anticipatory registered [ 1.331309] io scheduler deadline registered [ 1.331339] io scheduler cfq registered (default) [ 2.843904] pci 0000:01:00.0: Boot video device [ 2.846011] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.846036] pcieport-driver 0000:00:01.0: found MSI capability [ 2.846053] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 2.846060] pci_express 0000:00:01.0:pcie00: allocate port service [ 2.846070] pci_express 0000:00:01.0:pcie03: allocate port service [ 2.846106] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.846132] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.846151] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 2.846159] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.846168] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.846177] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.846220] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 2.846246] pcieport-driver 0000:00:1c.2: found MSI capability [ 2.846264] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X [ 2.846273] pci_express 0000:00:1c.2:pcie00: allocate port service [ 2.846282] pci_express 0000:00:1c.2:pcie02: allocate port service [ 2.846291] pci_express 0000:00:1c.2:pcie03: allocate port service [ 2.846334] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 2.846360] pcieport-driver 0000:00:1c.3: found MSI capability [ 2.846379] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X [ 2.846387] pci_express 0000:00:1c.3:pcie00: allocate port service [ 2.846396] pci_express 0000:00:1c.3:pcie02: allocate port service [ 2.846405] pci_express 0000:00:1c.3:pcie03: allocate port service [ 2.846449] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 2.846475] pcieport-driver 0000:00:1c.4: found MSI capability [ 2.846494] pcieport-driver 0000:00:1c.4: irq 2299 for MSI/MSI-X [ 2.846503] pci_express 0000:00:1c.4:pcie00: allocate port service [ 2.846512] pci_express 0000:00:1c.4:pcie02: allocate port service [ 2.846520] pci_express 0000:00:1c.4:pcie03: allocate port service [ 2.846563] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 2.846589] pcieport-driver 0000:00:1c.5: found MSI capability [ 2.846607] pcieport-driver 0000:00:1c.5: irq 2298 for MSI/MSI-X [ 2.846616] pci_express 0000:00:1c.5:pcie00: allocate port service [ 2.846627] pci_express 0000:00:1c.5:pcie02: allocate port service [ 2.846635] pci_express 0000:00:1c.5:pcie03: allocate port service [ 2.846708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.847307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.847413] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.847415] ACPI: Power Button (FF) [PWRF] [ 2.847455] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.847457] ACPI: Power Button (CM) [PWRB] [ 2.847932] ACPI: SSDT CFF4E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113) [ 2.848184] processor ACPI_CPU:00: registered as cooling_device0 [ 2.848449] ACPI: SSDT CFF4E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113) [ 2.848689] processor ACPI_CPU:01: registered as cooling_device1 [ 2.848950] ACPI: SSDT CFF4E400, 0143 (r1 AMI CPU3PM 1 INTL 20060113) [ 2.849185] processor ACPI_CPU:02: registered as cooling_device2 [ 2.849450] ACPI: SSDT CFF4E550, 0143 (r1 AMI CPU4PM 1 INTL 20060113) [ 2.849698] processor ACPI_CPU:03: registered as cooling_device3 [ 2.877653] Linux agpgart interface v0.103 [ 2.877663] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.877743] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.878032] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.878574] brd: module loaded [ 2.878807] loop: module loaded [ 2.878857] Fixed MDIO Bus: probed [ 2.878861] PPP generic driver version 2.4.2 [ 2.878902] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.878922] Driver 'sd' needs updating - please use bus_type methods [ 2.878929] Driver 'sr' needs updating - please use bus_type methods [ 2.878959] ahci 0000:00:1f.2: version 3.0 [ 2.878970] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 2.878994] ahci 0000:00:1f.2: irq 2297 for MSI/MSI-X [ 2.879051] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.879053] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 2.879056] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.879309] scsi0 : ahci [ 2.879383] scsi1 : ahci [ 2.879437] scsi2 : ahci [ 2.879483] scsi3 : ahci [ 2.879536] scsi4 : ahci [ 2.879585] scsi5 : ahci [ 2.879676] ata1: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5fe900 irq 2297 [ 2.879678] ata2: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5fe980 irq 2297 [ 2.879680] ata3: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5fea00 irq 2297 [ 2.879682] ata4: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5fea80 irq 2297 [ 2.879684] ata5: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5feb00 irq 2297 [ 2.879686] ata6: SATA max UDMA/133 abar m2048@0xfe5fe800 port 0xfe5feb80 irq 2297 [ 3.360010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.361082] ata1.00: ATAPI: PIONEER DVD-RW DVR-212, 1.21, max UDMA/66 [ 3.362452] ata1.00: configured for UDMA/66 [ 3.860013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.869016] ata2.00: HPA unlocked: 234372887 -> 234375000, native 234375000 [ 3.869019] ata2.00: ATA-6: WDC WD1200JD-75FYB0, 02.05D02, max UDMA/100 [ 3.869021] ata2.00: 234375000 sectors, multi 0: LBA48 [ 3.869027] ata2.00: applying bridge limits [ 3.874394] ata2.00: configured for UDMA/100 [ 4.372010] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.373051] ata3.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 4.373054] ata3.00: ATA-7: WDC WD1600JS-88MHB0, 02.01C03, max UDMA/133 [ 4.373055] ata3.00: 312581808 sectors, multi 0: LBA48 [ 4.373635] ata3.00: configured for UDMA/133 [ 4.872012] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.878316] ata4.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 [ 4.878318] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.884690] ata4.00: configured for UDMA/133 [ 5.384009] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.384523] ata5.00: ATA-7: WDC WD1600JS-88MHB0, 02.01C03, max UDMA/133 [ 5.384525] ata5.00: 312581808 sectors, multi 0: LBA48 [ 5.385130] ata5.00: configured for UDMA/133 [ 5.884011] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.897657] ata6.00: ATA-8: Hitachi HDT721016SLA380, ST1OA31B, max UDMA/133 [ 5.897659] ata6.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.898530] ata6.00: configured for UDMA/133 [ 5.918383] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-212 1.21 PQ: 0 ANSI: 5 [ 5.924347] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.924350] Uniform CD-ROM driver Revision: 3.20 [ 5.924452] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 5.924501] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.924570] scsi 1:0:0:0: Direct-Access ATA WDC WD1200JD-75F 02.0 PQ: 0 ANSI: 5 [ 5.924646] sd 1:0:0:0: [sda] 234375000 512-byte hardware sectors: (120 GB/111 GiB) [ 5.924659] sd 1:0:0:0: [sda] Write Protect is off [ 5.924661] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.924681] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.924723] sd 1:0:0:0: [sda] 234375000 512-byte hardware sectors: (120 GB/111 GiB) [ 5.924734] sd 1:0:0:0: [sda] Write Protect is off [ 5.924735] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.924755] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.924757] sda: sda1 [ 5.946203] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.946231] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.946292] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-88M 02.0 PQ: 0 ANSI: 5 [ 5.946356] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.946367] sd 2:0:0:0: [sdb] Write Protect is off [ 5.946369] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.946388] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.946433] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.946444] sd 2:0:0:0: [sdb] Write Protect is off [ 5.946446] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.946465] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.946467] sdb: sdb1 [ 5.956476] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.956511] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.956577] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 5.956642] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.956654] sd 3:0:0:0: [sdc] Write Protect is off [ 5.956656] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.956675] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.956724] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.956735] sd 3:0:0:0: [sdc] Write Protect is off [ 5.956737] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.956755] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.956758] sdc: sdc1 [ 5.968056] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.968086] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 5.968135] scsi 4:0:0:0: Direct-Access ATA WDC WD1600JS-88M 02.0 PQ: 0 ANSI: 5 [ 5.968196] sd 4:0:0:0: [sdd] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.968207] sd 4:0:0:0: [sdd] Write Protect is off [ 5.968209] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.968228] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.968270] sd 4:0:0:0: [sdd] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.968281] sd 4:0:0:0: [sdd] Write Protect is off [ 5.968283] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.968302] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.968304] sdd: sdd1 [ 5.974320] sd 4:0:0:0: [sdd] Attached SCSI disk [ 5.974352] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 5.974404] scsi 5:0:0:0: Direct-Access ATA Hitachi HDT72101 ST1O PQ: 0 ANSI: 5 [ 5.974467] sd 5:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.974478] sd 5:0:0:0: [sde] Write Protect is off [ 5.974479] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.974498] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.974540] sd 5:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 5.974552] sd 5:0:0:0: [sde] Write Protect is off [ 5.974553] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.974572] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.974575] sde: sde1 [ 5.996893] sd 5:0:0:0: [sde] Attached SCSI disk [ 5.996920] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 5.997267] pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.997294] pata_marvell 0000:02:00.0: setting latency timer to 64 [ 5.997362] scsi6 : pata_marvell [ 5.997414] scsi7 : pata_marvell [ 5.997440] ata7: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 17 [ 5.997441] ata8: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 17 [ 6.336056] ata8.01: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133 [ 6.336058] ata8.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 6.352492] ata8.01: configured for UDMA/133 [ 6.352552] scsi 7:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5 [ 6.352615] sd 7:0:1:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.352626] sd 7:0:1:0: [sdf] Write Protect is off [ 6.352627] sd 7:0:1:0: [sdf] Mode Sense: 00 3a 00 00 [ 6.352646] sd 7:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.352685] sd 7:0:1:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.352695] sd 7:0:1:0: [sdf] Write Protect is off [ 6.352697] sd 7:0:1:0: [sdf] Mode Sense: 00 3a 00 00 [ 6.352715] sd 7:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.352718] sdf: sdf1 [ 6.360778] sd 7:0:1:0: [sdf] Attached SCSI disk [ 6.360808] sd 7:0:1:0: Attached scsi generic sg6 type 0 [ 6.360993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.361008] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.361025] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 6.361028] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.361072] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.364986] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.364991] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 6.365001] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe5ffc00 [ 6.380006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.380056] usb usb1: configuration #1 chosen from 1 choice [ 6.380075] hub 1-0:1.0: USB hub found [ 6.380080] hub 1-0:1.0: 6 ports detected [ 6.380165] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.380174] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.380177] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.380214] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.384123] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.384127] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.384136] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe5ff800 [ 6.400006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.400044] usb usb2: configuration #1 chosen from 1 choice [ 6.400062] hub 2-0:1.0: USB hub found [ 6.400067] hub 2-0:1.0: 6 ports detected [ 6.400135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.400146] uhci_hcd: USB Universal Host Controller Interface driver [ 6.400175] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.400179] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6.400182] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.400214] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.400241] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 [ 6.400293] usb usb3: configuration #1 chosen from 1 choice [ 6.400312] hub 3-0:1.0: USB hub found [ 6.400317] hub 3-0:1.0: 2 ports detected [ 6.400377] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 6.400382] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 6.400384] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.400412] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.400436] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 [ 6.400490] usb usb4: configuration #1 chosen from 1 choice [ 6.400507] hub 4-0:1.0: USB hub found [ 6.400511] hub 4-0:1.0: 2 ports detected [ 6.400576] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.400581] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 6.400583] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 6.400611] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 6.400630] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00 [ 6.400683] usb usb5: configuration #1 chosen from 1 choice [ 6.400700] hub 5-0:1.0: USB hub found [ 6.400704] hub 5-0:1.0: 2 ports detected [ 6.400768] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.400772] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.400774] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.400806] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 6.400825] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 [ 6.400875] usb usb6: configuration #1 chosen from 1 choice [ 6.400894] hub 6-0:1.0: USB hub found [ 6.400899] hub 6-0:1.0: 2 ports detected [ 6.400956] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.400960] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.400962] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.400993] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 6.401017] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 [ 6.401068] usb usb7: configuration #1 chosen from 1 choice [ 6.401086] hub 7-0:1.0: USB hub found [ 6.401090] hub 7-0:1.0: 2 ports detected [ 6.401151] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.401155] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.401158] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.401192] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 6.401210] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 [ 6.401263] usb usb8: configuration #1 chosen from 1 choice [ 6.401280] hub 8-0:1.0: USB hub found [ 6.401287] hub 8-0:1.0: 2 ports detected [ 6.401382] usbcore: registered new interface driver libusual [ 6.401406] usbcore: registered new interface driver usbserial [ 6.401415] USB Serial support registered for generic [ 6.401427] usbcore: registered new interface driver usbserial_generic [ 6.401428] usbserial: USB Serial Driver core [ 6.401461] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 6.401463] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 6.401924] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.416032] mice: PS/2 mouse device common for all mice [ 6.452051] rtc_cmos 00:03: RTC can wake from S4 [ 6.452082] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 6.452103] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.452151] device-mapper: uevent: version 1.0.3 [ 6.452220] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 6.452323] device-mapper: multipath: version 1.0.5 loaded [ 6.452325] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.452436] cpuidle: using governor ladder [ 6.452438] cpuidle: using governor menu [ 6.452744] TCP cubic registered [ 6.452797] NET: Registered protocol family 10 [ 6.453093] lo: Disabled Privacy Extensions [ 6.453304] NET: Registered protocol family 17 [ 6.453317] Bluetooth: L2CAP ver 2.11 [ 6.453318] Bluetooth: L2CAP socket layer initialized [ 6.453321] Bluetooth: SCO (Voice Link) ver 0.6 [ 6.453322] Bluetooth: SCO socket layer initialized [ 6.453349] Bluetooth: RFCOMM socket layer initialized [ 6.453353] Bluetooth: RFCOMM TTY layer initialized [ 6.453354] Bluetooth: RFCOMM ver 1.10 [ 6.454276] registered taskstats version 1 [ 6.454406] Magic number: 5:508:888 [ 6.454482] rtc_cmos 00:03: setting system clock to 2009-04-24 13:51:20 UTC (1240581080) [ 6.454485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.454486] EDD information not available. [ 6.454520] Freeing unused kernel memory: 536k freed [ 6.454658] Write protecting the kernel read-only data: 6708k [ 6.549139] md: linear personality registered for level -1 [ 6.550694] md: multipath personality registered for level -4 [ 6.552084] md: raid0 personality registered for level 0 [ 6.554263] md: raid1 personality registered for level 1 [ 6.555502] xor: automatically using best checksumming function: generic_sse [ 6.572003] generic_sse: 8954.000 MB/sec [ 6.572005] xor: using function: generic_sse (8954.000 MB/sec) [ 6.572828] async_tx: api initialized (async) [ 6.640018] raid6: int64x1 1924 MB/s [ 6.708012] raid6: int64x2 2639 MB/s [ 6.776025] raid6: int64x4 2022 MB/s [ 6.844033] raid6: int64x8 1800 MB/s [ 6.912005] raid6: sse2x1 3916 MB/s [ 6.980005] raid6: sse2x2 4410 MB/s [ 7.048007] raid6: sse2x4 7193 MB/s [ 7.048008] raid6: using algorithm sse2x4 (7193 MB/s) [ 7.048010] md: raid6 personality registered for level 6 [ 7.048011] md: raid5 personality registered for level 5 [ 7.048013] md: raid4 personality registered for level 4 [ 7.052819] md: raid10 personality registered for level 10 [ 7.099397] sky2 driver version 1.22 [ 7.099442] sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.099455] sky2 0000:04:00.0: setting latency timer to 64 [ 7.099495] sky2 0000:04:00.0: Yukon-2 EC chip revision 2 [ 7.123099] ohci1394 0000:09:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.131416] sky2 0000:04:00.0: Marvell Yukon 88E8052 Gigabit Ethernet Controller [ 7.131418] Part Number: Yukon 88E8052 [ 7.131419] Engineering Level: Rev. 2.1 [ 7.131421] Manufacturer: Marvell [ 7.131469] sky2 0000:04:00.0: irq 2296 for MSI/MSI-X [ 7.131932] sky2 eth0: addr 00:1d:60:44:0d:a8 [ 7.131945] sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.131952] sky2 0000:03:00.0: setting latency timer to 64 [ 7.131968] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 [ 7.161520] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 7.163906] sky2 0000:03:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller [ 7.163908] Part Number: Yukon 88E8056 [ 7.163909] Engineering Level: Rev. 1.2 [ 7.163910] Manufacturer: Marvell [ 7.163959] sky2 0000:03:00.0: irq 2295 for MSI/MSI-X [ 7.165088] sky2 eth1: addr 00:1d:60:44:02:22 [ 7.175805] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.188316] md: bind [ 7.192280] md: bind [ 7.234842] md: bind [ 7.239692] md: bind [ 7.241339] raid10: raid set md0 active with 4 out of 4 devices [ 7.242651] md0: unknown partition table [ 7.295555] usb 1-1: configuration #1 chosen from 1 choice [ 7.298587] Initializing USB Mass Storage driver... [ 7.298686] scsi8 : SCSI emulation for USB Mass Storage devices [ 7.298759] usbcore: registered new interface driver usb-storage [ 7.298761] USB Mass Storage support registered. [ 7.298848] usb-storage: device found at 2 [ 7.298849] usb-storage: waiting for device to settle before scanning [ 7.351790] kjournald starting. Commit interval 5 seconds [ 7.351808] EXT3-fs: mounted filesystem with ordered data mode. [ 7.648010] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 7.831014] usb 6-1: configuration #1 chosen from 1 choice [ 8.072009] usb 6-2: new low speed USB device using uhci_hcd and address 3 [ 8.252038] usb 6-2: configuration #1 chosen from 1 choice [ 8.461044] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... [ 9.417041] ieee1394: Error parsing configrom for node 0-00:1023 [ 9.417144] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0011d800016ef355] [ 12.281857] udev: starting version 141 [ 12.297256] usb-storage: device scan complete [ 12.297858] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 12.298359] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 12.298854] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 12.299350] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 12.300715] sd 8:0:0:0: [sdg] Attached SCSI removable disk [ 12.300776] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 12.301522] sd 8:0:0:1: [sdh] Attached SCSI removable disk [ 12.301559] sd 8:0:0:1: Attached scsi generic sg8 type 0 [ 12.304415] sd 8:0:0:2: [sdi] Attached SCSI removable disk [ 12.305240] sd 8:0:0:2: Attached scsi generic sg9 type 0 [ 12.306032] sd 8:0:0:3: [sdj] Attached SCSI removable disk [ 12.306081] sd 8:0:0:3: Attached scsi generic sg10 type 0 [ 12.615678] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 12.643860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.725591] iTCO_vendor_support: vendor-support=0 [ 12.763730] usbcore: registered new interface driver hiddev [ 12.765107] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 12.765268] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) [ 12.765359] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.778592] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 12.809112] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0 [ 12.809317] usbcore: registered new interface driver usbhid [ 12.809334] usbhid: v2.6:USB HID core driver [ 12.837588] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5 [ 12.872133] logitech 0003:046D:C30A.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 12.908429] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input6 [ 12.948922] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.948997] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.957125] logitech 0003:046D:C30A.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-2/input1 [ 12.981909] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 13.015306] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.015340] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 13.284873] lp: driver loaded but no devices found [ 13.307670] w83627ehf: Found W83627DHG chip at 0x290 [ 13.321837] coretemp coretemp.0: Using relative temperature scale! [ 13.321870] coretemp coretemp.1: Using relative temperature scale! [ 13.321900] coretemp coretemp.2: Using relative temperature scale! [ 13.321932] coretemp coretemp.3: Using relative temperature scale! [ 14.001090] EXT3 FS on md0, internal journal [ 14.821172] kjournald starting. Commit interval 5 seconds [ 14.821479] EXT3 FS on sda1, internal journal [ 14.821485] EXT3-fs: mounted filesystem with ordered data mode. [ 15.228096] type=1505 audit(1240581089.273:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2574 [ 15.258990] type=1505 audit(1240581089.301:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2578 [ 15.259063] type=1505 audit(1240581089.301:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2578 [ 15.259091] type=1505 audit(1240581089.301:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2578 [ 15.259118] type=1505 audit(1240581089.301:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2578 [ 15.343892] type=1505 audit(1240581089.385:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2583 [ 15.344015] type=1505 audit(1240581089.389:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2583 [ 15.363450] type=1505 audit(1240581089.405:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2587 [ 23.964025] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 24.098165] usb 1-2: configuration #1 chosen from 1 choice [ 24.099484] scsi9 : SCSI emulation for USB Mass Storage devices [ 24.100424] usb-storage: device found at 3 [ 24.100426] usb-storage: waiting for device to settle before scanning [ 26.628160] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 26.628164] vboxdrv: Successfully done. [ 26.628166] vboxdrv: Found 4 processor cores. [ 26.628233] VBoxDrv: dbg - g_abExecMemory=ffffffffa02e0aa0 [ 26.628297] vboxdrv: fAsync=0 offMin=0x507 offMax=0x1ec3 [ 26.628348] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 26.628350] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 26.834527] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa047f940 [ 28.143742] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.143746] Bluetooth: BNEP filters: protocol multicast [ 28.216860] Bridge firewalling registered [ 29.100186] usb-storage: device scan complete [ 29.100915] scsi 9:0:0:0: Direct-Access FUJITSU MHV2060AT 0096 PQ: 0 ANSI: 2 CCS [ 29.101889] sd 9:0:0:0: [sdk] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 29.102640] sd 9:0:0:0: [sdk] Write Protect is off [ 29.102643] sd 9:0:0:0: [sdk] Mode Sense: 00 38 00 00 [ 29.102645] sd 9:0:0:0: [sdk] Assuming drive cache: write through [ 29.103398] sd 9:0:0:0: [sdk] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 29.104143] sd 9:0:0:0: [sdk] Write Protect is off [ 29.104145] sd 9:0:0:0: [sdk] Mode Sense: 00 38 00 00 [ 29.104147] sd 9:0:0:0: [sdk] Assuming drive cache: write through [ 29.104181] sdk: sdk1 [ 29.128669] sd 9:0:0:0: [sdk] Attached SCSI disk [ 29.128752] sd 9:0:0:0: Attached scsi generic sg11 type 0 [ 29.701444] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 30.013654] [drm] Initialized drm 1.1.0 20060810 [ 30.077970] pci 0000:01:00.0: setting latency timer to 64 [ 30.078112] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 30.078749] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 30.124475] ppdev: user-space parallel port driver [ 30.387132] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 30.387180] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 30.387213] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 30.443491] [drm] Setting GART location based on new memory map [ 30.459038] [drm] Loading RV770 PFP Microcode [ 30.459068] [drm] Loading RV770 CP Microcode [ 30.474019] [drm] Resetting GPU [ 30.474075] [drm] writeback test succeeded in 1 usecs [ 33.958952] sky2 eth1: enabling interface [ 33.959510] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 33.962008] sky2 eth0: enabling interface [ 33.962539] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.305177] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 36.305950] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 46.808010] eth0: no IPv6 routers present [ 56.226475] end_request: I/O error, dev sr0, sector 13283944 [ 56.317007] end_request: I/O error, dev sr0, sector 13283940 [ 56.389432] kjournald starting. Commit interval 5 seconds [ 56.390259] EXT3 FS on sdk1, internal journal [ 56.390264] EXT3-fs: mounted filesystem with ordered data mode. [ 56.407681] end_request: I/O error, dev sr0, sector 13283948 [ 56.570102] UDF-fs: Partition marked readonly; forcing readonly mount [ 56.610854] UDF-fs INFO UDF: Mounting volume 'GALAXY_QUEST_SKU1', timestamp 2001/01/05 11:30 (1000) [ 1436.994822] npviewer.bin[5954]: segfault at 79616c70 ip 0000000079616c70 sp 00000000ffa99b5c error 14 [ 3854.158005] usb 1-2: USB disconnect, address 3 [ 8618.089131] npviewer.bin[9234]: segfault at f5533030 ip 00000000f78809e0 sp 00000000ffb53624 error 4 in libpthread-2.9.so[f7879000+15000] [ 8621.640750] npviewer.bin[9268]: segfault at f5567030 ip 00000000f78b49e0 sp 00000000ffa89e04 error 4 in libpthread-2.9.so[f78ad000+15000] [ 8627.698590] npviewer.bin[9354]: segfault at f552a030 ip 00000000f78779e0 sp 00000000ffc4a714 error 4 in libpthread-2.9.so[f7870000+15000] [16859.561540] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x4010000 action 0xe frozen [16859.561544] ata4.00: irq_stat 0x00400040, connection status changed [16859.561546] ata4: SError: { PHYRdyChg DevExch } [16859.561550] ata4.00: cmd 61/78:00:c7:71:4f/00:00:09:00:00/40 tag 0 ncq 61440 out [16859.561551] res 40/00:04:c7:71:4f/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [16859.561553] ata4.00: status: { DRDY } [16859.561557] ata4: hard resetting link [16865.917018] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16865.929735] ata4.00: configured for UDMA/133 [16865.929744] ata4: EH complete [16865.929778] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [16865.929792] sd 3:0:0:0: [sdc] Write Protect is off [16865.929793] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [16865.929812] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17478.834643] ata4: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [17478.834648] ata4: irq_stat 0x00400040, connection status changed [17478.834651] ata4: SError: { PHYRdyChg DevExch } [17478.834657] ata4: hard resetting link [17481.005022] ata4: SATA link down (SStatus 0 SControl 300) [17481.441296] ata4: hard resetting link [17481.797021] ata4: SATA link down (SStatus 0 SControl 300) [17481.797028] ata4: limiting SATA link speed to 1.5 Gbps [17481.945025] ata4: hard resetting link [17482.340027] ata4: SATA link down (SStatus 0 SControl 310) [17482.340033] ata4.00: disabled [17482.340044] ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [17482.340047] ata4: irq_stat 0x00000040, connection status changed [17482.340051] ata4: hard resetting link [17482.341014] sd 3:0:0:0: rejecting I/O to offline device [17482.341036] sd 3:0:0:0: rejecting I/O to offline device [17482.341041] sd 3:0:0:0: rejecting I/O to offline device [17482.341044] end_request: I/O error, dev sdc, sector 312576575 [17482.341049] md: super_written gets error=-5, uptodate=0 [17482.341053] raid10: Disk failure on sdc1, disabling device. [17482.341054] raid10: Operation continuing on 3 devices. [17484.568010] ata4: COMRESET failed (errno=-32) [17484.568016] ata4: reset failed (errno=-32), retrying in 8 secs [17492.340022] ata4: limiting SATA link speed to 1.5 Gbps [17492.340025] ata4: hard resetting link [17493.232015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17493.238346] ata4.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 [17493.238350] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [17493.244749] ata4.00: configured for UDMA/133 [17493.244758] ata4: EH complete [17493.244764] ata4.00: detaching (SCSI 3:0:0:0) [17493.261680] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [17493.262763] sd 3:0:0:0: [sdc] Stopping disk [17494.127627] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [17494.127734] sd 3:0:0:0: [sdk] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [17494.127753] sd 3:0:0:0: [sdk] Write Protect is off [17494.127755] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [17494.127784] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17494.127867] sd 3:0:0:0: [sdk] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [17494.127883] sd 3:0:0:0: [sdk] Write Protect is off [17494.127886] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [17494.127914] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17494.127918] sdk: sdk1 [17499.837638] sd 3:0:0:0: [sdk] Attached SCSI disk [17499.837717] sd 3:0:0:0: Attached scsi generic sg11 type 0 [17507.232934] ata4: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [17507.232938] ata4: irq_stat 0x00400040, connection status changed [17507.232940] ata4: SError: { PHYRdyChg DevExch } [17507.232944] ata4: hard resetting link [17508.768025] ata4: SATA link down (SStatus 0 SControl 310) [17509.215977] ata4: hard resetting link [17509.612599] ata4: SATA link down (SStatus 0 SControl 310) [17509.748151] ata4: hard resetting link [17510.133023] ata4: SATA link down (SStatus 0 SControl 310) [17510.133029] ata4.00: disabled [17510.133041] ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [17510.133044] ata4: irq_stat 0x00000040, connection status changed [17510.133048] ata4: hard resetting link [17512.433017] ata4: COMRESET failed (errno=-32) [17512.433022] ata4: reset failed (errno=-32), retrying in 8 secs [17514.781523] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17514.781530] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [17514.781532] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask 0x4 (timeout) [17514.781535] ata6.00: status: { DRDY } [17514.781540] ata6: hard resetting link [17520.133014] ata4: limiting SATA link speed to 1.5 Gbps [17520.133018] ata4: hard resetting link [17523.429013] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17523.435339] ata4.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 [17523.435343] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [17523.441748] ata4.00: configured for UDMA/133 [17523.441757] ata4: EH complete [17523.441761] ata4.00: detaching (SCSI 3:0:0:0) [17523.442035] sd 3:0:0:0: [sdk] Synchronizing SCSI cache [17523.442970] sd 3:0:0:0: [sdk] Stopping disk [17524.309488] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [17524.309588] sd 3:0:0:0: [sdk] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [17524.309607] sd 3:0:0:0: [sdk] Write Protect is off [17524.309609] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [17524.309638] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17524.309713] sd 3:0:0:0: [sdk] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [17524.309730] sd 3:0:0:0: [sdk] Write Protect is off [17524.309732] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [17524.309760] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17524.309764] sdk:<3>ata6: softreset failed (device not ready) [17524.785521] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17526.466449] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x4010000 action 0xe frozen [17526.466454] ata4.00: irq_stat 0x00400040, connection status changed [17526.466457] ata4: SError: { PHYRdyChg DevExch } [17526.466463] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in [17526.466464] res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [17526.466467] ata4.00: status: { DRDY } [17526.466472] ata4: hard resetting link [17528.788013] ata4: COMRESET failed (errno=-32) [17528.788019] ata4: reset failed (errno=-32), retrying in 8 secs [17529.785517] ata6.00: qc timeout (cmd 0xec) [17529.785524] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4) [17529.785527] ata6.00: revalidation failed (errno=-5) [17529.785531] ata6: hard resetting link [17536.464011] ata4: hard resetting link [17538.948010] ata4: COMRESET failed (errno=-32) [17538.948016] ata4: reset failed (errno=-32), retrying in 8 secs [17539.788014] ata6: softreset failed (device not ready) [17539.788025] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17546.468012] ata4: hard resetting link [17548.868012] ata4: COMRESET failed (errno=-32) [17548.868017] ata4: reset failed (errno=-32), retrying in 33 secs [17549.789519] ata6.00: qc timeout (cmd 0xec) [17549.789528] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4) [17549.789531] ata6.00: revalidation failed (errno=-5) [17549.789537] ata6: limiting SATA link speed to 1.5 Gbps [17549.789541] ata6: hard resetting link [17559.792010] ata6: softreset failed (device not ready) [17559.792019] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17565.818759] ata6.00: configured for UDMA/133 [17565.818777] end_request: I/O error, dev sde, sector 312576575 [17565.818784] md: super_written gets error=-5, uptodate=0 [17565.818788] raid10: Disk failure on sde1, disabling device. [17565.818789] raid10: Operation continuing on 2 devices. [17565.818818] ata6: EH complete [17565.841972] RAID10 conf printout: [17565.841975] --- wd:2 rd:4 [17565.841977] disk 0, wo:1, o:0, dev:sde1 [17565.841980] disk 1, wo:0, o:1, dev:sdb1 [17565.841982] disk 2, wo:1, o:0, dev:sdc1 [17565.841984] disk 3, wo:0, o:1, dev:sdd1 [17565.852516] RAID10 conf printout: [17565.852519] --- wd:2 rd:4 [17565.852521] disk 0, wo:1, o:0, dev:sde1 [17565.852523] disk 1, wo:0, o:1, dev:sdb1 [17565.852525] disk 3, wo:0, o:1, dev:sdd1 [17565.852533] RAID10 conf printout: [17565.852535] --- wd:2 rd:4 [17565.852536] disk 0, wo:1, o:0, dev:sde1 [17565.852538] disk 1, wo:0, o:1, dev:sdb1 [17565.852540] disk 3, wo:0, o:1, dev:sdd1 [17565.864509] RAID10 conf printout: [17565.864512] --- wd:2 rd:4 [17565.864515] disk 1, wo:0, o:1, dev:sdb1 [17565.864517] disk 3, wo:0, o:1, dev:sdd1 [17581.464012] ata4: hard resetting link [17582.352012] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17582.364735] ata4.00: configured for UDMA/133 [17582.364746] ata4: EH complete [17582.364763] scsi 3:0:0:0: rejecting I/O to dead device [17582.364773] scsi 3:0:0:0: rejecting I/O to dead device [17582.364779] scsi 3:0:0:0: rejecting I/O to dead device [17582.364788] scsi 3:0:0:0: rejecting I/O to dead device [17582.374781] sdk1 [17582.375390] sd 3:0:0:0: [sdk] Attached SCSI disk [17582.375475] sd 3:0:0:0: Attached scsi generic sg3 type 0 [17582.375526] sd 5:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [17582.375545] sd 5:0:0:0: [sde] Write Protect is off [17582.375548] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [17582.375576] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17582.376545] sd 3:0:0:0: [sdk] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [17582.376565] sd 3:0:0:0: [sdk] Write Protect is off [17582.376568] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [17582.376597] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17690.150185] scsi 3:0:0:0: rejecting I/O to dead device [17690.150195] scsi 3:0:0:0: rejecting I/O to dead device [17690.150201] scsi 3:0:0:0: rejecting I/O to dead device [17690.150210] scsi 3:0:0:0: rejecting I/O to dead device