| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1240931173-17477-8-git-send-email-borislav.petkov@amd.com>
Date: Tue, 28 Apr 2009 17:05:59 +0200
From: Borislav Petkov <borislav.petkov@....com>
To: akpm@...ux-foundation.org, greg@...ah.com
CC: <linux-kernel@...r.kernel.org>,
Doug Thompson <dougthompson@...ssion.com>,
Borislav Petkov <borislav.petkov@....com>
Subject: [PATCH 07/21] amd64_edac: add helper to dump relevant registers
From: Doug Thompson <dougthompson@...ssion.com>
Signed-off-by: Doug Thompson <dougthompson@...ssion.com>
Signed-off-by: Borislav Petkov <borislav.petkov@....com>
---
drivers/edac/amd64_edac.c | 157 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 157 insertions(+), 0 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index b6d0b30..8d67d1b 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1752,3 +1752,160 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
return csrow;
}
+static int get_channel_from_x4_syndrome(unsigned short syndrome);
+static int get_channel_from_x8_syndrome(unsigned short syndrome);
+
+
+static void amd64_cpu_display_info(struct amd64_pvt *pvt)
+{
+ if (boot_cpu_data.x86 == 0x11)
+ edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n");
+ else if (boot_cpu_data.x86 == 0x10)
+ edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
+ else if (boot_cpu_data.x86 == 0xf)
+ edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
+ (pvt->ext_model >= OPTERON_CPU_REV_F) ?
+ "Rev F or later" : "Rev E or earlier");
+ else
+ /* we'll hardly ever ever get here */
+ edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n");
+}
+
+/*
+ * amd64_determine_edac_cap
+ *
+ * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the
+ * DIMMs are ECC capable.
+ */
+static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
+{
+ int bit;
+ enum dev_type edac_cap = EDAC_NONE;
+
+ bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
+ ? 19
+ : 17;
+
+ if (pvt->dclr0 >> BIT(bit)) {
+ debugf1(" edac_type is: EDAC_FLAG_SECDED\n");
+ edac_cap = EDAC_FLAG_SECDED;
+ }
+
+ return edac_cap;
+}
+
+
+static void f10_debug_display_dimm_sizes(int ctrl,
+ struct amd64_pvt *pvt, int ganged);
+
+/*
+ * amd64_dump_misc_regs
+ *
+ * for debug purposes, display and decode various NB registers that
+ * are for the f10 family.
+ *
+ * This function become a no-op when DEBUG is disabled
+ */
+static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
+{
+ int ganged;
+
+ debugf1(" nbcap:0x%8.08x DctDualCap=%s DualNode=%s 8-Node=%s\n",
+ pvt->nbcap,
+ (pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "True" : "False",
+ (pvt->nbcap & K8_NBCAP_DUAL_NODE) ? "True" : "False",
+ (pvt->nbcap & K8_NBCAP_8_NODE) ? "True" : "False");
+ debugf1(" ECC Capable=%s ChipKill Capable=%s\n",
+ (pvt->nbcap & K8_NBCAP_SECDED) ? "True" : "False",
+ (pvt->nbcap & K8_NBCAP_CHIPKILL) ? "True" : "False");
+ debugf1(" DramCfg0-low=0x%08x DIMM-ECC=%s Parity=%s Width=%s\n",
+ pvt->dclr0,
+ (pvt->dclr0 & BIT(19)) ? "Enabled" : "Disabled",
+ (pvt->dclr0 & BIT(8)) ? "Enabled" : "Disabled",
+ (pvt->dclr0 & BIT(11)) ? "128b" : "64b");
+ debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s DIMM Type=%s\n",
+ (pvt->dclr0 & BIT(12)) ? "Y" : "N",
+ (pvt->dclr0 & BIT(13)) ? "Y" : "N",
+ (pvt->dclr0 & BIT(14)) ? "Y" : "N",
+ (pvt->dclr0 & BIT(15)) ? "Y" : "N",
+ (pvt->dclr0 & BIT(16)) ? "UN-Buffered" : "Buffered");
+
+
+ debugf1(" online-spare: 0x%8.08x\n", pvt->online_spare);
+
+ if (boot_cpu_data.x86 == 0xf) {
+ /* K8 DHAR regiseter */
+ debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n",
+ pvt->dhar, dhar_base(pvt->dhar),
+ k8_dhar_offset(pvt->dhar));
+ debugf1(" DramHoleValid=%s\n",
+ (pvt->dhar & DHAR_VALID) ? "True" : "False");
+
+ debugf1(" dbam-dkt: 0x%8.08x\n", pvt->dbam0);
+
+ /* everything below this point is Fam10h and above */
+ return;
+
+ } else {
+ /* F10 DHAR register */
+ debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n",
+ pvt->dhar, dhar_base(pvt->dhar),
+ f10_dhar_offset(pvt->dhar));
+ debugf1(" DramMemHoistValid=%s DramHoleValid=%s\n",
+ (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) ?
+ "True" : "False",
+ (pvt->dhar & DHAR_VALID) ?
+ "True" : "False");
+ }
+
+ /* Only if NOT ganged does dcl1 have valid info */
+ if (!dct_ganging_enabled(pvt)) {
+ debugf1(" DramCfg1-low=0x%08x DIMM-ECC=%s Parity=%s "
+ "Width=%s\n", pvt->dclr1,
+ (pvt->dclr1 & BIT(19)) ? "Enabled" : "Disabled",
+ (pvt->dclr1 & BIT(8)) ? "Enabled" : "Disabled",
+ (pvt->dclr1 & BIT(11)) ? "128b" : "64b");
+ debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s "
+ "DIMM Type=%s\n",
+ (pvt->dclr1 & BIT(12)) ? "Y" : "N",
+ (pvt->dclr1 & BIT(13)) ? "Y" : "N",
+ (pvt->dclr1 & BIT(14)) ? "Y" : "N",
+ (pvt->dclr1 & BIT(15)) ? "Y" : "N",
+ (pvt->dclr1 & BIT(16)) ? "UN-Buffered" : "Buffered");
+ }
+
+ /*
+ * Determine if ganged and then dump memory sizes for first controller,
+ * and if NOT ganged dump info for 2nd controller.
+ */
+ ganged = dct_ganging_enabled(pvt);
+
+ f10_debug_display_dimm_sizes(0, pvt, ganged);
+
+ if (!ganged)
+ f10_debug_display_dimm_sizes(1, pvt, ganged);
+}
+
+/*
+ * amd64_read_dbam_reg
+ *
+ * Read in both of DBAM registers
+ */
+static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
+{
+ int err;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &pvt->dbam0);
+ if (err != 0)
+ debugf0("%s() Reading DBAM0 failed\n", __func__);
+
+ if (boot_cpu_data.x86 >= 0x10) {
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1,
+ &pvt->dbam1);
+
+ if (err != 0)
+ debugf0("%s() Reading DBAM1 failed\n", __func__);
+ }
+}
+
+
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists