| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1241024107-14535-12-git-send-email-borislav.petkov@amd.com>
Date: Wed, 29 Apr 2009 18:54:57 +0200
From: Borislav Petkov <borislav.petkov@....com>
To: akpm@...ux-foundation.org, greg@...ah.com
CC: mingo@...e.hu, tglx@...utronix.de, hpa@...or.com,
dougthompson@...ssion.com, <linux-kernel@...r.kernel.org>,
Borislav Petkov <borislav.petkov@....com>
Subject: [PATCH 11/21] amd64_edac: add f10-and-later methods-p1
From: Doug Thompson <dougthompson@...ssion.com>
Signed-off-by: Doug Thompson <dougthompson@...ssion.com>
Signed-off-by: Borislav Petkov <borislav.petkov@....com>
---
drivers/edac/amd64_edac.c | 233 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 233 insertions(+), 0 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 813a1ab..2658852 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2254,4 +2254,237 @@ static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
return nr_pages;
}
+/*
+ * f10_early_channel_count
+ *
+ * Get the number of DCT channels in use
+ *
+ * Return:
+ * number of Memory Channels in operation
+ * Pass back:
+ * contents of the DCL0_LOW register
+ */
+static int f10_early_channel_count(struct amd64_pvt *pvt)
+{
+ int err;
+ int channels = 0;
+ u32 dbam;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+ if (err != 0)
+ debugf0("%s() Reading F10_DCLR_0 failed\n", __func__);
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
+ if (err != 0)
+ debugf0("%s() Reading F10_DCLR_0 failed\n", __func__);
+
+ /* If we are in 128 bit mode, then we are using 2 channels */
+ if (pvt->dclr0 & F10_WIDTH_128) {
+ debugf0("%s() Data WIDTH is 128 bits - 2 channels\n",
+ __func__);
+ channels = 2;
+ return channels;
+ }
+
+ /* Need to check if in UN-ganged mode: In such, there are 2
+ * channels, but they are NOT in 128 bit mode and thus the above
+ * 'dcl0' status bit will be OFF, but there still are 2 channels
+ *
+ * Need to check DCT0[0] and DCT1[0] to see if only one of them
+ * has their CSEnable bit on. If so, then SINGLE DIMM case.
+ */
+ debugf0("%s() Data WIDTH is NOT 128 bits - need more decoding\n",
+ __func__);
+
+ /* Check DRAM Bank Address Mapping values for each DIMM
+ * to see if there is more than just one DIMM present in an
+ * unganged mode. Need to check both controllers sinc DIMMs
+ * can be placed in either one
+ */
+ channels = 0;
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam);
+ if (err != 0)
+ debugf0("%s() Reading DBAM0 failed\n", __func__);
+
+ if (DBAM_DIMM(0, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(1, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(2, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(3, dbam) > 0)
+ channels++;
+
+ /* If more than 2 DIMMs are present, then we have 2 channels */
+ if (channels > 2)
+ channels = 2;
+ else if (channels == 0) {
+ /* No DIMMs on DCT0, so look at DCT1 */
+ err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam);
+ if (err != 0)
+ debugf0("%s() Reading DBAM1 failed\n", __func__);
+
+ if (DBAM_DIMM(0, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(1, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(2, dbam) > 0)
+ channels++;
+ if (DBAM_DIMM(3, dbam) > 0)
+ channels++;
+
+ if (channels > 2)
+ channels = 2;
+ }
+
+ /* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */
+ if (channels == 0)
+ channels = 1;
+
+ debugf0("%s() DIMM count= %d\n", __func__, channels);
+
+ return channels;
+}
+
+/*
+ * f10_dbam_map_to_pages
+ */
+static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+{
+ return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+}
+
+/*
+ * amd64_setup
+ *
+ * Perform needed operations on this NB thare are needed
+ * for the duration of time that the module is operating
+ *
+ * 1) Enable "extended configuration access via 0xCF8" feature
+ */
+static void amd64_setup(struct amd64_pvt *pvt)
+{
+ u32 reg;
+ int err;
+
+ err = pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®);
+ if (err != 0)
+ debugf0("%s() Reading F10_NB_CFG_HIGH failed\n",
+ __func__);
+
+ pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG);
+ reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+/*
+ * amd64_teardown
+ *
+ * teardown any items that were 'setup' in the setup func
+ *
+ * 1) Restore the "extended configuration access via 0xCF8" feature
+ */
+static void amd64_teardown(struct amd64_pvt *pvt)
+{
+ u32 reg;
+ int err;
+
+ err = pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®);
+ if (err != 0)
+ debugf0("%s() Reading F10_NB_CFG_HIGH failed\n",
+ __func__);
+
+ reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ if (pvt->flags.cf8_extcfg)
+ reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+ pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+/*
+ * f10_get_error_address
+ * extract from the hardware copies of the error register
+ * the ERROR ADDRESS for Family 10h CPUs
+ */
+static u64 f10_get_error_address(struct mem_ctl_info *mci,
+ struct amd64_error_info_regs *info)
+{
+ return (((u64) (info->nbeah & 0xffff)) << 32) +
+ (info->nbeal & ~0x01);
+}
+
+/*
+ * f10_read_dram_base_limit
+ *
+ * Read the Base and Limit registers for F10 based Memory controllers
+ * Extract fields from the 'raw' reg into separate data fields
+ *
+ * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN
+ */
+static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+{
+ u32 high_offset;
+ u32 low_offset;
+ u32 high_base;
+ u32 low_base;
+ u32 high_limit;
+ u32 low_limit;
+ int err;
+
+ low_offset = K8_DRAM_BASE_LOW + (dram << 3);
+ high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
+
+ /* read the 'raw' DRAM BASE Address register */
+ err = pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base);
+ if (err != 0)
+ debugf0("%s() Reading low_offset= 0x%x failed\n", __func__,
+ low_offset);
+
+ /* Read from the ECS data register */
+ err = pci_read_config_dword(pvt->addr_f1_ctl,
+ high_offset, &high_base);
+ if (err != 0)
+ debugf0("%s() Reading high_offset= 0x%x failed. Default=0\n",
+ __func__, high_offset);
+
+ /* Extract parts into separate data entries */
+ pvt->dram_rw_en[dram] = (low_base & 0x3);
+
+ if (pvt->dram_rw_en[dram] == 0)
+ return;
+
+ pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
+
+ pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
+ ((u64) low_base & 0xFFFF0000))) << 8;
+ low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
+ high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
+
+ /* read the 'raw' LIMIT registers */
+ err = pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit);
+ if (err != 0)
+ debugf0("%s() Reading low_offset= 0x%x failed\n", __func__,
+ low_offset);
+
+ /* Read from the ECS data register for the HIGH portion */
+ err = pci_read_config_dword(pvt->addr_f1_ctl,
+ high_offset, &high_limit);
+ if (err != 0)
+ debugf0("%s() Reading high_ofset= 0x%x failed\n", __func__,
+ high_offset);
+
+ debugf0("%s() on dram=%d\n", __func__, dram);
+ debugf0(" HW Regs: BASE=0x%08x-%08x LIMIT= 0x%08x-%08x\n",
+ high_base, low_base, high_limit, low_limit);
+
+ pvt->dram_DstNode[dram] = (low_limit & 0x7);
+ pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
+
+ /* Extract address values and form a LIMIT address
+ * Limit is the HIGHEST memory location of the region, so lower
+ * 24-bit needs to be all ones
+ */
+ low_limit |= 0x0000FFFF;
+ pvt->dram_limit[dram] =
+ ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+}
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists