linux-kernel - [PATCH 1/4] x86/acpi: move pin_programmed bit map to io

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <49F95F10.3060209@kernel.org>
Date:	Thu, 30 Apr 2009 01:19:28 -0700
From:	Yinghai Lu <yinghai@...nel.org>
To:	Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
	"H. Peter Anvin" <hpa@...or.com>, Len Brown <lenb@...nel.org>
CC:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	ACPI Devel Maling List <linux-acpi@...r.kernel.org>
Subject: [PATCH 1/4] x86/acpi: move pin_programmed bit map to io_apic.c


prepare to call setup_io_apic_routing in pcibios_irq_enable
also remove not needed member apic_id.

Signed-off-by: Yinghai Lu <yinghai@...nel.org>

---
 arch/x86/kernel/acpi/boot.c    |   18 ++----------------
 arch/x86/kernel/apic/io_apic.c |   25 ++++++++++++++++++++++++-
 2 files changed, 26 insertions(+), 17 deletions(-)

Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -904,10 +904,8 @@ extern int es7000_plat;
 #endif
 
 static struct {
-	int apic_id;
 	int gsi_base;
 	int gsi_end;
-	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
 int mp_find_ioapic(int gsi)
@@ -996,7 +994,6 @@ void __init mp_register_ioapic(int id, u
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
 	    io_apic_get_redir_entries(idx);
@@ -1189,7 +1186,7 @@ static int mp_config_acpi_gsi(struct dev
 	mp_irq.srcbus = number;
 	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
 	ioapic = mp_find_ioapic(gsi);
-	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid;
 	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
 
 	save_mp_irq(&mp_irq);
@@ -1224,23 +1221,12 @@ int mp_register_gsi(struct device *dev,
 
 	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       "%d-%d\n", mp_ioapics[ioapic].apicid,
 		       ioapic_pin);
 		return gsi;
 	}
 	mp_config_acpi_gsi(dev, gsi, triggering, polarity);
 
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug("Pin %d-%d already programmed\n",
-			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-		return gsi;
-	}
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
 	io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
 				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
 				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3938,7 +3938,7 @@ int __init io_apic_get_version(int ioapi
 }
 #endif
 
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
 				 int triggering, int polarity)
 {
 	struct irq_desc *desc;
@@ -3975,6 +3975,29 @@ int io_apic_set_pci_routing(struct devic
 	return 0;
 }
 
+static struct {
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+				 int triggering, int polarity)
+{
+
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapics[ioapic].apicid, pin);
+		return 0;
+	}
+	set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+	return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+					 triggering, polarity);
+}
 
 int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/