| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <49FEC5E1.4040900@cosmosbay.com>
Date: Mon, 04 May 2009 12:39:29 +0200
From: Eric Dumazet <dada1@...mosbay.com>
To: Ingo Molnar <mingo@...e.hu>
CC: "H. Peter Anvin" <hpa@...or.com>,
"Paul E. McKenney" <paulmck@...ibm.com>,
Paul Mackerras <paulus@...ba.org>,
Christoph Lameter <cl@...ux.com>,
linux kernel <linux-kernel@...r.kernel.org>,
Andi Kleen <andi@...stfloor.org>,
David Miller <davem@...emloft.net>, jesse.brandeburg@...el.com,
netdev@...r.kernel.org, haoki@...hat.com, mchan@...adcom.com,
davidel@...ilserver.org, Mike Galbraith <efault@....de>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>
Subject: Re: [BUG] perf_counter: change cpu frequencies
Ingo Molnar a écrit :
> * Eric Dumazet <dada1@...mosbay.com> wrote:
>
>> Eric Dumazet a écrit :
>>> Eric Dumazet a écrit :
>>>
>>>> But if I use plain "perf stat -a sleep 10"
>>>> it seems I get wrong values again (16 G cycles/sec) for all next perf sessions
>>>>
>>> Well, I confirm all my cpus switched from 3GHz to 2GHz, after
>>>
>>> "perf stat -a sleep 10"
>>>
>>> (but "perf stat -e instructions -e cycles -a sleep 10" doesnt trigger this problem)
>>>
>>> Nothing logged, and /proc/cpuinfo stills reports 3 GHz frequencies
>>>
>>> # cat unit.c
>>> main() {
>>> int i;
>>> for (i = 0 ; i < 10000000; i++)
>>> getppid();
>>> }
>>> # time ./unit
>>>
>>> real 0m0.818s
>>> user 0m0.289s
>>> sys 0m0.529s
>>> # perf stat -a sleep 10 2>/dev/null
>>> # time ./unit
>>>
>>> real 0m1.122s
>>> user 0m0.482s
>>> sys 0m0.640s
>>>
>>> # tail -n 27 /proc/cpuinfo
>>> processor : 7
>>> vendor_id : GenuineIntel
>>> cpu family : 6
>>> model : 23
>>> model name : Intel(R) Xeon(R) CPU E5450 @ 3.00GHz
>>> stepping : 6
>>> cpu MHz : 3000.102
>>> cache size : 6144 KB
>>> physical id : 1
>>> siblings : 1
>>> core id : 3
>>> cpu cores : 4
>>> apicid : 7
>>> initial apicid : 7
>>> fdiv_bug : no
>>> hlt_bug : no
>>> f00f_bug : no
>>> coma_bug : no
>>> fpu : yes
>>> fpu_exception : yes
>>> cpuid level : 10
>>> wp : yes
>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 lahf_lm tpr_shadow vnmi flexpriority
>>> bogomips : 6000.01
>>> clflush size : 64
>>> power management:
>>>
>>> # grep CPU_FREQ .config
>>> # CONFIG_CPU_FREQ is not set
>>>
>>>
>>> perf_counter seems promising, but still... needs some bug hunting :)
>>>
>> Update :
>>
>> Mike Galbraith suggested me to try various things, and finally, I discovered
>> this frequency change was probably a BIOS problem on my HP BL460c G1
>>
>> System Options -> Power regulator for Proliant
>>
>> [*] HP Dynamic Power Savings Mode
>> [ ] HP Static Low Power Mode
>> [ ] HP Static High Performance Mode
>> [ ] OS Control Mode
>>
>>
>> I switched it to 'OS Control Mode'
>>
>> Then acpi-cpufreq could load, and no more frequencies changes on a "perf -a sleep 10"
>> session, using or not cpufreq.
>> (Supported cpufreq speeds on these cpus : 1999 & 2999 MHz)
>>
>> So it was a BIOS issue
>
> ah! That makes quite a bit of sense. The BIOS interfering with an OS
> feature ... Was that the default setting in the BIOS?
This was default setting in BIOS, yes.
>
>> # perf stat -a sleep 10
>>
>> Performance counter stats for 'sleep':
>>
>> 80005.418223 task clock ticks (msecs)
>> 80266 context switches (events)
>> 3 CPU migrations (events)
>> 486 pagefaults (events)
>> 240013851624 CPU cycles (events) << good >>
>> 239076501419 instructions (events)
>> 679464 cache references (events)
>> <not counted> cache misses
>>
>> Wall-clock time elapsed: 10000.468808 msecs
>
> That looks perfect now.
>
> It would also be really nice to have a sysrq-p dump of your PMU
> state before you've done any profiling. Is there any trace of the
> BIOS meddling with them, that we could detect (and warn about)
> during bootup?
Difference is that on BIOS set to 'OS Control Mode' I see one more entry in ACPI list :
[ 0.000000] ACPI: SSDT cfe5b000 004C9 (v01 HP SSDTP 00000001 INTL 20030228)
...
And these 8 additional lines after (one per cpu)
[ 0.706697] ACPI: SSDT cfe5c000 002DA (v01 HP SSDT0 00000001 INTL 20030228)
[ 0.707250] ACPI: SSDT cfe5c300 002DA (v01 HP SSDT1 00000001 INTL 20030228)
[ 0.707768] ACPI: SSDT cfe5c600 002DA (v01 HP SSDT2 00000001 INTL 20030228)
[ 0.708376] ACPI: SSDT cfe5c900 002DF (v01 HP SSDT3 00000001 INTL 20030228)
[ 0.708964] ACPI: SSDT cfe5cc00 002DA (v01 HP SSDT4 00000001 INTL 20030228)
[ 0.709567] ACPI: SSDT cfe5cf00 002DA (v01 HP SSDT5 00000001 INTL 20030228)
[ 0.710122] ACPI: SSDT cfe5d200 002DA (v01 HP SSDT6 00000001 INTL 20030228)
[ 0.710713] ACPI: SSDT cfe5d500 002DA (v01 HP SSDT7 00000001 INTL 20030228)
Also, if this option is set to default (HP Dynamic Power Savings Mode) I get :
# modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.30-rc4-tip-01560-gdd5fa92/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko): No such device
but no kernel message logged.
Might be possible to add some kind of warning yes, I can test a patch if you want.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists