Linux version 2.6.30-rc3 (root@barret.risingtidesystems.com) (gcc version 4.4.0 20090427 (Red Hat 4.4.0-3) (GCC) ) #11 SMP Mon May 4 03:01:10 PDT 2009 Command line: ro root=/dev/mapper/vg_barret-lv_root rhgb pci=resource_alignment=06:00.0;06:00.1;06:00.2;06:00.3;06:00.4;06:00.5;06:00.6;06:00.7;07:00.0;07:00.1;07:00.2;07:00.3;07:00.4;07:00.5;07:00.6;07:00.7 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data) BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000240000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x240000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DFFFF uncachable E0000-E3FFF write-protect E4000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FE00000000 write-back 1 base 0200000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFC0000000 uncachable 3 base 00BF800000 mask FFFF800000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf780 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000bf780000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf780000 page 4k kernel direct mapping tables up to bf780000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000240000000 0100000000 - 0240000000 page 2M kernel direct mapping tables up to 240000000 @ 13000-1d000 RAMDISK: 37c91000 - 37fefb43 ACPI: RSDP 00000000000fa420 00024 (v02 ACPIAM) ACPI: XSDT 00000000bf780100 00064 (v01 042109 XSDT1027 20090421 MSFT 00000097) ACPI: FACP 00000000bf780290 000F4 (v04 042109 FACP1027 20090421 MSFT 00000097) ACPI: DSDT 00000000bf7804b0 05E8E (v02 7010_ 7010_001 00000001 INTL 20051117) ACPI: FACS 00000000bf78e000 00040 ACPI: APIC 00000000bf780390 000DE (v02 042109 APIC1027 20090421 MSFT 00000097) ACPI: MCFG 00000000bf780470 0003C (v01 042109 OEMMCFG 20090421 MSFT 00000097) ACPI: OEMB 00000000bf78e040 0007A (v01 042109 OEMB1027 20090421 MSFT 00000097) ACPI: HPET 00000000bf78a4b0 00038 (v01 042109 OEMHPET 20090421 MSFT 00000097) ACPI: SRAT 00000000bf78a4f0 001D0 (v01 042109 OEMSRAT 00000001 INTL 00000001) ACPI: DMAR 00000000bf78e0c0 00128 (v01 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 00000000bf791e00 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0240000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000d038f0] TEXT DATA BSS ==> [0000200000 - 0000d038f0] #3 [0037c91000 - 0037fefb43] RAMDISK ==> [0037c91000 - 0037fefb43] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0000d04000 - 0000d04158] BRK ==> [0000d04000 - 0000d04158] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00240000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000bf780 0: 0x00100000 -> 0x00240000 On node 0 totalpages: 2094862 DMA zone: 56 pages used for memmap DMA zone: 2927 pages reserved DMA zone: 999 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765880 pages, LIFO batch:31 Normal zone: 17920 pages used for memmap Normal zone: 1292800 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfec8a000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 16 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:16 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff880030000000, static data 68768 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059679 Kernel command line: ro root=/dev/mapper/vg_barret-lv_root rhgb pci=resource_alignment=06:00.0;06:00.1;06:00.2;06:00.3;06:00.4;06:00.5;06:00.6;06:00.7;07:00.0;07:00.1;07:00.2;07:00.3;07:00.4;07:00.5;07:00.6;07:00.7 Initializing CPU#0 NR_IRQS:4352 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2266.696 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Memory: 8220660k/9437184k available (2906k kernel code, 1057736k absent, 157960k reserved, 1829k data, 452k init) hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.39 BogoMIPS (lpj=9066784) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to physical flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4533.20 BogoMIPS (lpj=9066400) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 2 APIC 0x4 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4533.19 BogoMIPS (lpj=9066384) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 3 APIC 0x6 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4533.20 BogoMIPS (lpj=9066404) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 4 APIC 0x10 ip 0x6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 4533.24 BogoMIPS (lpj=9066490) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 5 APIC 0x12 ip 0x6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 4533.24 BogoMIPS (lpj=9066488) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 6 APIC 0x14 ip 0x6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 4533.24 BogoMIPS (lpj=9066485) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 7 APIC 0x16 ip 0x6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 4533.24 BogoMIPS (lpj=9066483) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 8 APIC 0x1 ip 0x6000 Initializing CPU#8 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066471) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU8: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 9 APIC 0x3 ip 0x6000 Initializing CPU#9 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066474) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU9: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 10 APIC 0x5 ip 0x6000 Initializing CPU#10 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066470) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU10: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 11 APIC 0x7 ip 0x6000 Initializing CPU#11 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066476) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU11: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 12 APIC 0x11 ip 0x6000 Initializing CPU#12 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066478) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU12: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 13 APIC 0x13 ip 0x6000 Initializing CPU#13 Calibrating delay using timer specific routine.. 4533.24 BogoMIPS (lpj=9066482) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU13: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 14 APIC 0x15 ip 0x6000 Initializing CPU#14 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066470) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU14: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Booting processor 15 APIC 0x17 ip 0x6000 Initializing CPU#15 Calibrating delay using timer specific routine.. 4533.23 BogoMIPS (lpj=9066474) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU15: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 Skipping synchronization checks as TSC is reliable. Brought up 16 CPUs Total of 16 processors activated (72531.85 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 0 1 2 3 8 9 10 11 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU1 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 1 2 3 8 9 10 11 0 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU2 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 2 3 8 9 10 11 0 1 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU3 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 3 8 9 10 11 0 1 2 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU4 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 4 5 6 7 12 13 14 15 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU5 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 5 6 7 12 13 14 15 4 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU6 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 6 7 12 13 14 15 4 5 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU7 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 7 12 13 14 15 4 5 6 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU8 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 8 9 10 11 0 1 2 3 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU9 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 9 10 11 0 1 2 3 8 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU10 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 10 11 0 1 2 3 8 9 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU11 attaching sched-domain: domain 0: span 0-3,8-11 level MC groups: 11 0 1 2 3 8 9 10 domain 1: span 0-15 level CPU groups: 0-3,8-11 4-7,12-15 CPU12 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 12 13 14 15 4 5 6 7 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU13 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 13 14 15 4 5 6 7 12 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU14 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 14 15 4 5 6 7 12 13 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 CPU15 attaching sched-domain: domain 0: span 4-7,12-15 level MC groups: 15 4 5 6 7 12 13 14 domain 1: span 0-15 level CPU groups: 4-7,12-15 0-3,8-11 net_namespace: 1824 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 9A, should be 97 [20090320] ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:16.0: reg 10 64bit mmio: [0xfaed4000-0xfaed7fff] pci 0000:00:16.1: reg 10 64bit mmio: [0xfaed8000-0xfaedbfff] pci 0000:00:16.2: reg 10 64bit mmio: [0xfaedc000-0xfaedffff] pci 0000:00:16.3: reg 10 64bit mmio: [0xfaee0000-0xfaee3fff] pci 0000:00:16.4: reg 10 64bit mmio: [0xfaee4000-0xfaee7fff] pci 0000:00:16.5: reg 10 64bit mmio: [0xfaee8000-0xfaeebfff] pci 0000:00:16.6: reg 10 64bit mmio: [0xfaeec000-0xfaeeffff] pci 0000:00:16.7: reg 10 64bit mmio: [0xfaef0000-0xfaef3fff] pci 0000:00:1a.0: reg 20 io port: [0x9400-0x941f] pci 0000:00:1a.1: reg 20 io port: [0x9480-0x949f] pci 0000:00:1a.2: reg 20 io port: [0x9800-0x981f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfaef6000-0xfaef63ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfaef8000-0xfaefbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x9880-0x989f] pci 0000:00:1d.1: reg 20 io port: [0x9c00-0x9c1f] pci 0000:00:1d.2: reg 20 io port: [0xa000-0xa01f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfaefc000-0xfaefc3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at f700 (mask 000f) pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07] pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883] pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807] pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f] pci 0000:00:1f.2: reg 24 io port: [0xa080-0xa08f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfaefe000-0xfaefe0ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0xbc00-0xbc07] pci 0000:00:1f.5: reg 14 io port: [0xb880-0xb883] pci 0000:00:1f.5: reg 18 io port: [0xb800-0xb807] pci 0000:00:1f.5: reg 1c io port: [0xb480-0xb483] pci 0000:00:1f.5: reg 20 io port: [0xb400-0xb40f] pci 0000:00:1f.5: reg 24 io port: [0xb080-0xb08f] pci 0000:03:00.0: reg 10 32bit mmio: [0xfbee0000-0xfbefffff] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfbedc000-0xfbedffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbe00000-0xfbefffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xfbde0000-0xfbdfffff] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:02:00.0: reg 1c 32bit mmio: [0xfbddc000-0xfbddffff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfb7fffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xfafe0000-0xfaffffff] pci 0000:01:00.0: reg 18 io port: [0xc880-0xc8ff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio: [0xfbcfe000-0xfbcfe7ff] pci 0000:01:05.0: reg 14 io port: [0xcc00-0xcc7f] pci 0000:01:05.0: supports D2 pci 0000:01:05.0: PME# supported from D2 D3hot D3cold pci 0000:01:05.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfaf00000-0xfbcfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:Host address width 40 DMAR:DRHD (flags: 0x00000001)base: 0x00000000fbffe000 DMAR:RMRR base: 0x00000000000ec000 end: 0x00000000000effff DMAR:RMRR base: 0x00000000bf7ec000 end: 0x00000000bf7fffff DMAR:Unknown DMAR structure type IOAPIC id 8 under DRHD base 0xfbffe000 IOAPIC id 9 under DRHD base 0xfbffe000 IOMMU 0xfbffe000: using Queued invalidation IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf7ec000 - 0xbf800000] IOMMU: Setting identity map for device 0000:00:1d.0 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xec000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xec000 - 0xf0000] IOMMU: gfx device 0000:01:00.0 1-1 mapping IOMMU: Setting identity map for device 0000:01:00.0 [0x10000 - 0x9e000] IOMMU: Setting identity map for device 0000:01:00.0 [0x100000 - 0xbf780000] IOMMU: Setting identity map for device 0000:01:00.0 [0x100000000 - 0x240000000] IOMMU: Prepare 0-16M unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O Multi-level page-table translation for DMAR. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_2_iommu on cpu 0 node 0 alloc irq_2_iommu on cpu 0 node 0 alloc irq_2_iommu on cpu 0 node 0 alloc irq_2_iommu on cpu 0 node 0 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved system 00:08: ioport range 0xa00-0xa0f has been reserved system 00:08: ioport range 0xa10-0xa1f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x500-0x57f could not be reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:08 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:07 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:06 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.4: IO window: 0xe000-0xefff pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.5: IO window: 0xd000-0xdfff pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xc000-0xcfff pci 0000:00:1e.0: MEM window: 0xfaf00000-0xfbcfffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:08: resource 0 mem: [0x0-0x0] pci_bus 0000:08: resource 1 mem: [0x0-0x0] pci_bus 0000:08: resource 2 mem: [0x0-0x0] pci_bus 0000:08: resource 3 mem: [0x0-0x0] pci_bus 0000:07: resource 0 mem: [0x0-0x0] pci_bus 0000:07: resource 1 mem: [0x0-0x0] pci_bus 0000:07: resource 2 mem: [0x0-0x0] pci_bus 0000:07: resource 3 mem: [0x0-0x0] pci_bus 0000:06: resource 0 mem: [0x0-0x0] pci_bus 0000:06: resource 1 mem: [0x0-0x0] pci_bus 0000:06: resource 2 mem: [0x0-0x0] pci_bus 0000:06: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 mem: [0x0-0x0] pci_bus 0000:05: resource 1 mem: [0x0-0x0] pci_bus 0000:05: resource 2 mem: [0x0-0x0] pci_bus 0000:05: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0x0-0x0] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfaf00000-0xfbcfffff] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... rootfs image is initramfs; unpacking... Freeing initrd memory: 3450k freed audit: initializing netlink socket (disabled) type=2000 audit(1241513600.604:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 16064 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:01.0: irq 49 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:03.0: irq 50 for MSI/MSI-X pcieport-driver 0000:00:03.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:05.0: irq 51 for MSI/MSI-X pcieport-driver 0000:00:05.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:07.0: irq 52 for MSI/MSI-X pcieport-driver 0000:00:07.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:1c.0: irq 53 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:1c.4: irq 54 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 pcieport-driver 0000:00:1c.5: irq 55 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: SSDT 00000000bf78e1f0 02B94 (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 00000000bf790d90 00980 (v01 PmRef P001Cst 00003001 INTL 20051117) ACPI: SSDT 00000000bf791710 006E2 (v01 PmRef Cpu0Tst 00003000 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [P001] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [P002] (supports 8 throttling states) ACPI: CPU2 (power states: C1[C1] C2[C3]) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [P003] (supports 8 throttling states) ACPI: CPU3 (power states: C1[C1] C2[C3]) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [P004] (supports 8 throttling states) ACPI: CPU4 (power states: C1[C1] C2[C3]) processor ACPI_CPU:04: registered as cooling_device4 ACPI: Processor [P005] (supports 8 throttling states) ACPI: CPU5 (power states: C1[C1] C2[C3]) processor ACPI_CPU:05: registered as cooling_device5 ACPI: Processor [P006] (supports 8 throttling states) ACPI: CPU6 (power states: C1[C1] C2[C3]) processor ACPI_CPU:06: registered as cooling_device6 ACPI: Processor [P007] (supports 8 throttling states) ACPI: CPU7 (power states: C1[C1] C2[C3]) processor ACPI_CPU:07: registered as cooling_device7 ACPI: Processor [P008] (supports 8 throttling states) ACPI: CPU8 (power states: C1[C1] C2[C3]) processor ACPI_CPU:08: registered as cooling_device8 ACPI: Processor [P009] (supports 8 throttling states) ACPI: CPU9 (power states: C1[C1] C2[C3]) processor ACPI_CPU:09: registered as cooling_device9 ACPI: Processor [P010] (supports 8 throttling states) ACPI: CPU10 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0a: registered as cooling_device10 ACPI: Processor [P011] (supports 8 throttling states) ACPI: CPU11 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0b: registered as cooling_device11 ACPI: Processor [P012] (supports 8 throttling states) ACPI: CPU12 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0c: registered as cooling_device12 ACPI: Processor [P013] (supports 8 throttling states) ACPI: CPU13 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0d: registered as cooling_device13 ACPI: Processor [P014] (supports 8 throttling states) ACPI: CPU14 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0e: registered as cooling_device14 ACPI: Processor [P015] (supports 8 throttling states) ACPI: CPU15 (power states: C1[C1] C2[C3]) processor ACPI_CPU:0f: registered as cooling_device15 ACPI: Processor [P016] (supports 8 throttling states) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 brd: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 452k freed Write protecting the kernel read-only data: 4036k SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 alloc irq_2_iommu on cpu 0 node 0 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-6: ST380817AS, 3.42, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 ata2.00: SATA link down (SStatus 0 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_2_iommu on cpu 0 node 0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfaef6000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_2_iommu on cpu 0 node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfaefc000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_2_iommu on cpu 0 node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs: barriers enabled kjournald2 starting: pid 883, dev dm-0:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-0 with ordered data mode SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1241513604.336:2): selinux=0 auid=4294967295 ses=4294967295 usb 2-5: new high speed USB device using ehci_hcd and address 2 usb 2-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 usb 2-5: configuration #1 chosen from 1 choice hub 2-5:1.0: USB hub found hub 2-5:1.0: 3 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Sony Computer Entertainment Inc. SCE USB MOUSE as /class/input/input0 generic-usb 0003:054C:0061.0001: input: USB HID v1.00 Mouse [Sony Computer Entertainment Inc. SCE USB MOUSE] on usb-0000:00:1a.0-2/input0 usb 2-5.1: new high speed USB device using ehci_hcd and address 3 usb 2-5.1: configuration #1 chosen from 1 choice input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1 generic-usb 0003:046B:FF10.0002: input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input0 input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input2 generic-usb 0003:046B:FF10.0003: input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input1 usb 3-1.1: new full speed USB device using uhci_hcd and address 4 usb 3-1.1: configuration #1 chosen from 1 choice input: Sony Computer Entertainment Inc. SCE USB Keyboard as /class/input/input3 generic-usb 0003:054C:005C.0004: input: USB HID v1.00 Keyboard [Sony Computer Entertainment Inc. SCE USB Keyboard] on usb-0000:00:1a.0-1.1/input0 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly input: Power Button as /class/input/input4 ACPI: Power Button [PWRF] input: Power Button as /class/input/input5 ACPI: Power Button [PWRB] input: PC Speaker as /class/input/input6 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:03:00.0: Disabling L1 ASPM e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:03:00.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:03:00.0: irq 56 for MSI/MSI-X alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:03:00.0: irq 57 for MSI/MSI-X alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:03:00.0: irq 58 for MSI/MSI-X 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:e0:81:c0:90:b3 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff e1000e 0000:02:00.0: Disabling L1 ASPM e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:02:00.0: setting latency timer to 64 alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:02:00.0: irq 59 for MSI/MSI-X alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:02:00.0: irq 60 for MSI/MSI-X alloc irq_2_iommu on cpu 0 node 0 e1000e 0000:02:00.0: irq 61 for MSI/MSI-X serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:e0:81:c0:90:b2 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: ffffff-0ff serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A sd 0:0:0:0: Attached scsi generic sg0 type 0 firewire_ohci 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10 loaded kvm module (kvm-85) firewire_core: created device fw0: GUID 00e0810000310bb8, S400 device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT4 FS on dm-0, internal journal on dm-0:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 10158072k swap on /dev/mapper/vg_barret-lv_swap. Priority:-1 extents:1 across:10158072k platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 platform microcode: firmware: requesting intel-ucode/06-1a-05 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) NET: Registered protocol family 10 lo: Disabled Privacy Extensions iscsi: registered transport (iser) ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. can't load conntrack support for proto=10 ip_tables: (C) 2000-2006 Netfilter Core Team can't load conntrack support for proto=2 RPC: Registered udp transport module. RPC: Registered tcp transport module. Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining can't load conntrack support for proto=2 ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present e1000e 0000:02:00.0: PCI INT A disabled pci-stub 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 assign device: host bdf = 2:0:0 pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X pci-stub 0000:02:00.0: PCI INT A disabled pci-stub 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 assign device: host bdf = 2:0:0 pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:260 enable_irq+0x36/0x50() Hardware name: empty Unbalanced enable for IRQ 59 Modules linked in: ipt_REJECT xt_tcpudp bridge stp sunrpc iptable_filter ip_tables xt_state nf_conntrack ip6table_filter ip6_tables x_tables ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi cpufreq_ondemand acpi_cpufreq freq_table ext3 jbd loop dm_multipath scsi_dh kvm_intel kvm uinput i2c_i801 firewire_ohci joydev firewire_core sg i2c_core 8250_pnp crc_itu_t e1000e 8250 serial_core rtc_cmos pcspkr serio_raw rtc_core rtc_lib button sd_mod dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod uhci_hcd ohci_hcd ehci_hcd ata_piix libata scsi_mod [last unloaded: microcode] Pid: 55, comm: events/4 Not tainted 2.6.30-rc3 #11 Call Trace: [] ? warn_slowpath+0xcb/0xe8 [] ? autoremove_wake_function+0x9/0x2a [] ? __wake_up_common+0x41/0x78 [] ? update_curr+0x67/0xeb [] ? __switch_to+0xb6/0x274 [] ? kvm_irq_delivery_to_apic+0xb3/0xf7 [kvm] [] ? __apic_accept_irq+0x15a/0x173 [kvm] [] ? kvm_set_msi+0x5b/0x60 [kvm] [] ? enable_irq+0x36/0x50 [] ? kvm_assigned_dev_interrupt_work_handler+0x6d/0xbc [kvm] [] ? worker_thread+0x182/0x223 [] ? autoremove_wake_function+0x0/0x2a [] ? worker_thread+0x0/0x223 [] ? worker_thread+0x0/0x223 [] ? kthread+0x54/0x7e [] ? child_rip+0xa/0x20 [] ? _spin_lock+0x5/0x8 [] ? kthread+0x0/0x7e [] ? child_rip+0x0/0x20 ---[ end trace 3fbc2dd20bf89ef0 ]--- pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: PCI INT A disabled pci-stub 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 assign device: host bdf = 2:0:0 pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X pci-stub 0000:02:00.0: PCI INT A disabled pci-stub 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 assign device: host bdf = 2:0:0 pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X scsi4 : iSCSI Initiator over TCP/IP scsi 4:0:0:0: Direct-Access LIO-ORG RAMDISK-DR 3.0 PQ: 0 ANSI: 5 sd 4:0:0:0: Attached scsi generic sg1 type 0 scsi 4:0:0:1: Direct-Access LIO-ORG RAMDISK-DR 3.0 PQ: 0 ANSI: 5 sd 4:0:0:1: Attached scsi generic sg2 type 0 sd 4:0:0:0: [sdb] 262144 512-byte hardware sectors: (134 MB/128 MiB) sd 4:0:0:1: [sdc] 262144 512-byte hardware sectors: (134 MB/128 MiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 2f 00 00 00 sd 4:0:0:1: [sdc] Write Protect is off sd 4:0:0:1: [sdc] Mode Sense: 2f 00 00 00 sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb:<6> sdc: unknown partition table sd 4:0:0:0: [sdb] Attached SCSI disk unknown partition table sd 4:0:0:1: [sdc] Attached SCSI disk ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:260 enable_irq+0x36/0x50() Hardware name: empty Unbalanced enable for IRQ 59 Modules linked in: ipt_REJECT xt_tcpudp bridge stp sunrpc iptable_filter ip_tables xt_state nf_conntrack ip6table_filter ip6_tables x_tables ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi cpufreq_ondemand acpi_cpufreq freq_table ext3 jbd loop dm_multipath scsi_dh kvm_intel kvm uinput i2c_i801 firewire_ohci joydev firewire_core sg i2c_core 8250_pnp crc_itu_t e1000e 8250 serial_core rtc_cmos pcspkr serio_raw rtc_core rtc_lib button sd_mod dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod uhci_hcd ohci_hcd ehci_hcd ata_piix libata scsi_mod [last unloaded: microcode] Pid: 51, comm: events/0 Tainted: G W 2.6.30-rc3 #11 Call Trace: [] ? warn_slowpath+0xcb/0xe8 [] ? generic_exec_single+0x6a/0x88 [] ? update_curr+0x67/0xeb [] ? vcpu_kick_intr+0x0/0x1 [kvm] [] ? __switch_to+0xb6/0x274 [] ? __dequeue_entity+0x1b/0x2f [] ? kvm_irq_delivery_to_apic+0xb3/0xf7 [kvm] [] ? __apic_accept_irq+0x15a/0x173 [kvm] [] ? kvm_set_msi+0x5b/0x60 [kvm] [] ? enable_irq+0x36/0x50 [] ? kvm_assigned_dev_interrupt_work_handler+0x6d/0xbc [kvm] [] ? worker_thread+0x182/0x223 [] ? autoremove_wake_function+0x0/0x2a [] ? worker_thread+0x0/0x223 [] ? worker_thread+0x0/0x223 [] ? kthread+0x54/0x7e [] ? child_rip+0xa/0x20 [] ? _spin_lock+0x5/0x8 [] ? kthread+0x0/0x7e [] ? child_rip+0x0/0x20 ---[ end trace 3fbc2dd20bf89ef1 ]--- connection1:0: ping timeout of 5 secs expired, last rx 4295286327, last ping 4295285518, now 4295286768 connection1:0: detected conn error (1011) session1: session recovery timed out after 120 secs sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 138240 sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 Buffer I/O error on device sdb, logical block 1 Buffer I/O error on device sdb, logical block 2 Buffer I/O error on device sdb, logical block 3 sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 Buffer I/O error on device sdb, logical block 1 Buffer I/O error on device sdb, logical block 2 Buffer I/O error on device sdb, logical block 3 sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 sd 4:0:0:0: [sdb] Unhandled error code sd 4:0:0:0: [sdb] Result: hostbyte=DID_TRANSPORT_FAILFAST driverbyte=DRIVER_OK end_request: I/O error, dev sdb, sector 0 pci-stub 0000:02:00.0: PCI INT A disabled pci-stub 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 assign device: host bdf = 2:0:0 pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X