| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4B6A08C587958942AA3002690DD4F8C354F61C62@cosmail02.lsi.com>
Date: Tue, 5 May 2009 19:52:48 -0600
From: "Yang, Bo" <Bo.Yang@....com>
To: "Yang, Bo" <Bo.Yang@....com>,
James Bottomley <James.Bottomley@...senPartnership.com>
CC: "linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"akpm@...l.org" <akpm@...l.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Austria, Winston" <Winston.Austria@....com>
Subject: [PATCH 8/10] scsi: megaraid_sas - Driver adds the IEEE SGE format
to support SAS 2 controller
Our new SAS 2 controller supports the IEEE SGE format. Driver added this IEEE SGE support to the I/O routine.
Signed-off-by Bo Yang<bo.yang@....com>
---
drivers/scsi/megaraid/megaraid_sas.c | 81 +++++++++++++++++++++++++++++++----
drivers/scsi/megaraid/megaraid_sas.h | 9 +++
2 files changed, 82 insertions(+), 8 deletions(-)
diff -rupN linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.c 2009-05-04 20:39:56.000000000 -0400
+++ linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.c 2009-05-04 23:01:04.000000000 -0400
@@ -695,6 +695,35 @@ megasas_make_sgl64(struct megasas_instan
return sge_count;
}
+/**
+ * megasas_make_sgl_skinny - Prepares IEEE SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl_skinny(struct megasas_instance *instance,
+ struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge_skinny[i].phys_addr =
+ sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
/**
* megasas_get_frame_count - Computes the number of frames
* @frame_type : type of frame- io or pthru frame
@@ -702,8 +731,8 @@ megasas_make_sgl64(struct megasas_instan
*
* Returns the number of frames required for numnber of sge's (sge_count)
*/
-
-static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
+static u32 megasas_get_frame_count(struct megasas_instance *instance,
+ u8 sge_count, u8 frame_type)
{
int num_cnt;
int sge_bytes;
@@ -713,6 +742,10 @@ static u32 megasas_get_frame_count(u8 sg
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Main frame can contain 2 SGEs for 64-bit SGLs and
* 3 SGEs for 32-bit SGLs for ldio &
@@ -720,12 +753,16 @@ static u32 megasas_get_frame_count(u8 sg
* 2 SGEs for 32-bit SGLs for pthru frame
*/
if (unlikely(frame_type == PTHRU_FRAME)) {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 1;
else
num_cnt = sge_count - 2;
} else {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 2;
else
num_cnt = sge_count - 3;
@@ -774,6 +811,10 @@ megasas_build_dcdb(struct megasas_instan
else if (scp->sc_data_direction == PCI_DMA_NONE)
flags = MFI_FRAME_DIR_NONE;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the DCDB frame
*/
@@ -803,7 +844,11 @@ megasas_build_dcdb(struct megasas_instan
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee == 1) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &pthru->sgl);
+ } else if (IS_DMA64) {
pthru->flags |= MFI_FRAME_SGL64;
pthru->sge_count = megasas_make_sgl64(instance, scp,
&pthru->sgl);
@@ -822,7 +867,7 @@ megasas_build_dcdb(struct megasas_instan
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(pthru->sge_count,
+ cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
PTHRU_FRAME);
return cmd->frame_count;
@@ -853,6 +898,10 @@ megasas_build_ldio(struct megasas_instan
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
@@ -923,7 +972,11 @@ megasas_build_ldio(struct megasas_instan
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &ldio->sgl);
+ } else if (IS_DMA64) {
ldio->flags |= MFI_FRAME_SGL64;
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
} else
@@ -940,7 +993,8 @@ megasas_build_ldio(struct megasas_instan
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(ldio->sge_count, IO_FRAME);
+ cmd->frame_count = megasas_get_frame_count(instance,
+ ldio->sge_count, IO_FRAME);
return cmd->frame_count;
}
@@ -1892,6 +1946,10 @@ static int megasas_create_frame_pool(str
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Calculated the number of 64byte frames required for SGL
*/
@@ -2687,6 +2745,11 @@ megasas_register_aen(struct megasas_inst
dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+ if (instance->aen_cmd != NULL) {
+ megasas_return_cmd(instance, cmd);
+ return 0;
+ }
+
/*
* Store reference to the cmd used to register for AEN. When an
* application wants us to register for AEN, we have to abort this
@@ -2856,6 +2919,7 @@ megasas_probe_one(struct pci_dev *pdev,
*instance->producer = 0;
*instance->consumer = 0;
+ instance->flag_ieee = 0;
megasas_poll_wait_aen = 0;
instance->hotplug_wk = NULL;
@@ -2895,6 +2959,7 @@ megasas_probe_one(struct pci_dev *pdev,
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->flag_ieee = 1;
sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
} else
sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
diff -rupN linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6.28_orig/drivers/scsi/megaraid/megaraid_sas.h 2009-05-04 20:39:57.000000000 -0400
+++ linux-2.6.28_new/drivers/scsi/megaraid/megaraid_sas.h 2009-05-04 20:00:32.000000000 -0400
@@ -96,6 +96,7 @@
#define MFI_FRAME_DIR_WRITE 0x0008
#define MFI_FRAME_DIR_READ 0x0010
#define MFI_FRAME_DIR_BOTH 0x0018
+#define MFI_FRAME_IEEE 0x0020
/*
* Definition for cmd_status
@@ -742,10 +743,17 @@ struct megasas_sge64 {
} __attribute__ ((packed));
+struct megasas_sge_skinny {
+ u64 phys_addr;
+ u32 length;
+ u32 flag;
+} __attribute__ ((packed));
+
union megasas_sgl {
struct megasas_sge32 sge32[1];
struct megasas_sge64 sge64[1];
+ struct megasas_sge_skinny sge_skinny[1];
} __attribute__ ((packed));
@@ -1226,6 +1234,7 @@ struct megasas_instance {
u8 flag;
u8 unload;
+ u8 flag_ieee;
unsigned long last_time;
struct timer_list io_completion_timer;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists