linux-kernel - 2.6.30-rc4: microcode: failed to init CPU1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1241633352.4524.3.camel@localhost.localdomain>
Date:	Wed, 06 May 2009 20:09:12 +0200
From:	Thomas Meyer <thomas@...3r.de>
To:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: 2.6.30-rc4: microcode: failed to init CPU1

Hi,

With 2.6.30-rc4 I see this after resume from ram or disk. Here log from resume from disk:

[ 6643.757890] Breaking affinity for irq 23
[ 6643.759029] kvm: disabling virtualization on CPU1
[ 6643.859360] CPU 1 is now offline
[ 6643.859366] SMP alternatives: switching to UP code
[ 6643.869609] CPU1 is down
[ 6643.869682] Extended CMOS year: 2000
[ 6643.869786] PM: Creating hibernation image: 
[ 6643.872676] PM: Need to copy 124075 pages
[ 6643.872676] Intel machine check architecture supported.
[ 6643.872676] Intel machine check reporting enabled on CPU#0.
[ 6643.872676] PM: Restoring platform NVS memory
[ 6643.872676] Extended CMOS year: 2000
[ 6643.872676] Enabling non-boot CPUs ...
[ 6643.872676] SMP alternatives: switching to SMP code
[ 6643.879652] CPU 1 irqstacks, hard=c20d6000 soft=c20d7000
[ 6643.879661] Booting processor 1 APIC 0x1 ip 0x6000
[ 6643.869076] Initializing CPU#1
[ 6643.869076] Calibrating delay using timer specific routine.. 3663.43 BogoMIPS (lpj=6103090)
[ 6643.869076] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6643.869076] CPU: L2 cache: 2048K
[ 6643.869076] CPU: Physical Processor ID: 0
[ 6643.869076] CPU: Processor Core ID: 1
[ 6643.869076] Intel machine check architecture supported.
[ 6643.869076] Intel machine check reporting enabled on CPU#1.
[ 6643.973311] CPU1: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[ 6643.973364] kvm: enabling virtualization on CPU1
[ 6643.973521] Switched to high resolution mode on CPU 1
[ 6643.982900] microcode: failed to init CPU1
[ 6643.983528] CPU1 is up
[ 6643.984529] ACPI: Waking up from system sleep state S4
[ 6644.290917] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 6644.291103] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 6644.291139] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
[ 6644.291187] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 6644.297593] pci 0000:00:07.0: PME# disabled

Is this an error/problem?

greets
thomas


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/