linux-kernel - Re: [RFC PATCH dm-ioband] Added in blktrace msgs for dm-ioband

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20090507.092322.71121515.ryov@valinux.co.jp>
Date:	Thu, 07 May 2009 09:23:22 +0900 (JST)
From:	Ryo Tsuruta <ryov@...inux.co.jp>
To:	lizf@...fujitsu.com
Cc:	Alan.Brunelle@...com, dm-devel@...hat.com,
	linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH dm-ioband] Added in blktrace msgs for dm-ioband

Hi Li,

From: Li Zefan <lizf@...fujitsu.com>
Subject: Re: [RFC PATCH dm-ioband] Added in blktrace msgs for dm-ioband
Date: Mon, 04 May 2009 11:24:27 +0800

> Ryo Tsuruta wrote:
> > Hi Alan,
> > 
> >> Hi Ryo -
> >>
> >> I don't know if you are taking in patches, but whilst trying to uncover
> >> some odd behavior I added some blktrace messages to dm-ioband-ctl.c. If
> >> you're keeping one code base for old stuff (2.6.18-ish RHEL stuff) and
> >> upstream you'll have to #if around these (the blktrace message stuff
> >> came in around 2.6.26 or 27 I think).
> >>
> >> My test case was to take a single 400GB storage device, put two 200GB
> >> partitions on it and then see what the "penalty" or overhead for adding
> >> dm-ioband on top. To do this I simply created an ext2 FS on each
> >> partition in parallel (two processes each doing a mkfs to one of the
> >> partitions). Then I put two dm-ioband devices on top of the two
> >> partitions (setting the weight to 100 in both cases - thus they should
> >> have equal access).
> >>
> >> Using default values I was seeing /very/ large differences - on the
> >> order of 3X. When I bumped the number of tokens to a large number
> >> (10,240) the timings got much closer (<2%). I have found that using
> >> weight-iosize performs worse than weight (closer to 5% penalty).
> > 
> > I could reproduce similar results. One dm-ioband device seems to stop
> > issuing I/Os for a few seconds at times. I'll investigate more on that.
> >  
> >> I'll try to formalize these results as I go forward and report out on
> >> them. In any event, I thought I'd share this patch with you if you are
> >> interested...
> > 
> > Thanks. I'll include your patche into the next release.
> >  
> 
> IMO we should use TRACE_EVENT instead of adding new blk_add_trace_msg().

Thanks for your suggestion. I'll use TRACE_EVENT instead.

> 
> >> Here's a sampling from some blktrace output (sorry for the wrapping) - I
> >> should note that I'm a bit scared to see such large numbers of holds
> >> going on when the token count should be >5,000 for each device...
> >> Holding these back in an equal access situation is inhibiting the block
> >> I/O layer to merge (most) of these (as mkfs performs lots & lots of
> >> small but sequential I/Os).
> 

Thanks,
Ryo Tsuruta
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/