| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-5ef2183768bb7d64b85eccbfa1537a61cbefa97c@git.kernel.org>
Date: Mon, 11 May 2009 09:53:00 GMT
From: tip-bot for Yinghai Lu <yinghai@...nel.org>
To: linux-tip-commits@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, hpa@...or.com, mingo@...hat.com,
yinghai@...nel.org, lenb@...nel.org, akpm@...ux-foundation.org,
jbarnes@...tuousgeek.org, tglx@...utronix.de, mingo@...e.hu
Subject: [tip:irq/numa] x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
Commit-ID: 5ef2183768bb7d64b85eccbfa1537a61cbefa97c
Gitweb: http://git.kernel.org/tip/5ef2183768bb7d64b85eccbfa1537a61cbefa97c
Author: Yinghai Lu <yinghai@...nel.org>
AuthorDate: Wed, 6 May 2009 10:08:50 -0700
Committer: Ingo Molnar <mingo@...e.hu>
CommitDate: Mon, 11 May 2009 10:35:09 +0200
x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
So we could set io apic routing when ACPI is not enabled.
[ Impact: prepare for new functionality ]
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: Jesse Barnes <jbarnes@...tuousgeek.org>
Cc: Len Brown <lenb@...nel.org>
LKML-Reference: <4A01C422.5070400@...nel.org>
Signed-off-by: Ingo Molnar <mingo@...e.hu>
---
arch/x86/include/asm/io_apic.h | 4 +-
arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++--------------------
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 27bd2fd..6fd99f9 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -154,10 +154,10 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index caf9dbd..3a68dae 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3839,6 +3839,67 @@ int __init arch_probe_nr_irqs(void)
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+ return 0;
+}
+
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
@@ -3933,67 +3994,6 @@ int __init io_apic_get_version(int ioapic)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int node;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- if (dev)
- node = dev_to_node(dev);
- else
- node = cpu_to_node(boot_cpu_id);
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapics[ioapic].apicid, pin);
- return 0;
- }
- set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
-
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
int i;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists