| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4A0813C5.2080403@panasas.com>
Date: Mon, 11 May 2009 15:02:13 +0300
From: Boaz Harrosh <bharrosh@...asas.com>
To: Tejun Heo <tj@...nel.org>
CC: axboe@...nel.dk, linux-kernel@...r.kernel.org, jeff@...zik.org,
linux-ide@...r.kernel.org, James.Bottomley@...senPartnership.com,
linux-scsi@...r.kernel.org, bzolnier@...il.com,
petkovbb@...glemail.com, sshtylyov@...mvista.com,
mike.miller@...com, Eric.Moore@....com, stern@...land.harvard.edu,
fujita.tomonori@....ntt.co.jp, zaitcev@...hat.com,
Geert.Uytterhoeven@...ycom.com, sfr@...b.auug.org.au,
grant.likely@...retlab.ca, paul.clements@...eleye.com,
tim@...erelk.net, jeremy@...source.com, adrian@...en.demon.co.uk,
oakad@...oo.com, dwmw2@...radead.org, schwidefsky@...ibm.com,
ballabio_dario@....com, davem@...emloft.net, rusty@...tcorp.com.au,
Markus.Lidel@...dowconnect.com,
"Darrick J. Wong" <djwong@...ibm.com>
Subject: Re: [PATCH 08/11] block: cleanup rq->data_len usages
On 05/04/2009 10:58 AM, Tejun Heo wrote:
> With recent unification of fields, it's now guaranteed that
> rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct
> users to accessors. IDE will be converted in a separate patch.
>
> Boaz: spotted incorrect data_len/resid_len conversion in osd.
>
> [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
>
> Signed-off-by: Tejun Heo <tj@...nel.org>
> Cc: Pete Zaitcev <zaitcev@...hat.com>
> Cc: Eric Moore <Eric.Moore@....com>
> Cc: Markus Lidel <Markus.Lidel@...dowconnect.com>
> Cc: Darrick J. Wong <djwong@...ibm.com>
> Cc: James Bottomley <James.Bottomley@...senPartnership.com>
> Cc: Eric Moore <Eric.Moore@....com>
> Cc: Boaz Harrosh <bharrosh@...asas.com>
> Cc: FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>
> ---
> drivers/ata/libata-scsi.c | 2 +-
> drivers/block/ub.c | 8 ++++----
> drivers/message/fusion/mptsas.c | 20 ++++++++++----------
> drivers/message/i2o/i2o_block.c | 2 +-
> drivers/scsi/libsas/sas_expander.c | 8 ++++----
> drivers/scsi/libsas/sas_host_smp.c | 18 +++++++++---------
> drivers/scsi/mpt2sas/mpt2sas_transport.c | 21 +++++++++++----------
> drivers/scsi/osd/osd_initiator.c | 4 ++--
> drivers/scsi/scsi_lib.c | 13 ++++++-------
> drivers/scsi/scsi_tgt_lib.c | 2 +-
> 10 files changed, 49 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 2733b0c..6e4c600 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq)
> if (likely(!blk_pc_request(rq)))
> return 0;
>
> - if (!rq->data_len || (rq->cmd_flags & REQ_RW))
> + if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
> return 0;
>
> return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
> diff --git a/drivers/block/ub.c b/drivers/block/ub.c
> index dc3b899..1591f61 100644
> --- a/drivers/block/ub.c
> +++ b/drivers/block/ub.c
> @@ -747,7 +747,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
> {
> struct request *rq = urq->rq;
>
> - if (rq->data_len == 0) {
> + if (blk_rq_bytes(rq) == 0) {
> cmd->dir = UB_DIR_NONE;
> } else {
> if (rq_data_dir(rq) == WRITE)
> @@ -762,7 +762,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
> memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
> cmd->cdb_len = rq->cmd_len;
>
> - cmd->len = rq->data_len;
> + cmd->len = blk_rq_bytes(rq);
>
> /*
> * To reapply this to every URB is not as incorrect as it looks.
> @@ -783,8 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
>
> if (cmd->error == 0) {
> if (blk_pc_request(rq)) {
> - if (cmd->act_len < rq->data_len)
> - rq->resid_len = rq->data_len - cmd->act_len;
> + if (cmd->act_len < blk_rq_bytes(rq))
> + rq->resid_len = blk_rq_bytes(rq) - cmd->act_len;
> scsi_status = 0;
> } else {
> if (cmd->act_len != cmd->len) {
> diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
> index 5d5f347..4e6fcf0 100644
> --- a/drivers/message/fusion/mptsas.c
> +++ b/drivers/message/fusion/mptsas.c
> @@ -1277,8 +1277,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> /* do we need to support multiple segments? */
> if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
> printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
> - ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
> - rsp->bio->bi_vcnt, rsp->data_len);
> + ioc->name, __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
> + rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
> return -EINVAL;
> }
>
> @@ -1295,7 +1295,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> smpreq = (SmpPassthroughRequest_t *)mf;
> memset(smpreq, 0, sizeof(*smpreq));
>
> - smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
> + smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
> smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
>
> if (rphy)
> @@ -1321,10 +1321,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> MPI_SGE_FLAGS_END_OF_BUFFER |
> MPI_SGE_FLAGS_DIRECTION |
> mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
> - flagsLength |= (req->data_len - 4);
> + flagsLength |= (blk_rq_bytes(req) - 4);
>
> dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
> - req->data_len, PCI_DMA_BIDIRECTIONAL);
> + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
> if (!dma_addr_out)
> goto put_mf;
> mpt_add_sge(psge, flagsLength, dma_addr_out);
> @@ -1332,9 +1332,9 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
>
> /* response */
> flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
> - flagsLength |= rsp->data_len + 4;
> + flagsLength |= blk_rq_bytes(rsp) + 4;
> dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
> - rsp->data_len, PCI_DMA_BIDIRECTIONAL);
> + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
> if (!dma_addr_in)
> goto unmap;
> mpt_add_sge(psge, flagsLength, dma_addr_in);
> @@ -1357,7 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
> memcpy(req->sense, smprep, sizeof(*smprep));
> req->sense_len = sizeof(*smprep);
> - rsp->resid_len = rsp->data_len - smprep->ResponseDataLength;
> + rsp->resid_len = blk_rq_bytes(rsp) - smprep->ResponseDataLength;
> } else {
> printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
> ioc->name, __func__);
> @@ -1365,10 +1365,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> }
> unmap:
> if (dma_addr_out)
> - pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
> + pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req),
> PCI_DMA_BIDIRECTIONAL);
> if (dma_addr_in)
> - pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
> + pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp),
> PCI_DMA_BIDIRECTIONAL);
> put_mf:
> if (mf)
> diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
> index 510eb47..6b61d28 100644
> --- a/drivers/message/i2o/i2o_block.c
> +++ b/drivers/message/i2o/i2o_block.c
> @@ -430,7 +430,7 @@ static void i2o_block_end_request(struct request *req, int error,
> int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT);
>
> if (blk_pc_request(req))
> - leftover = req->data_len;
> + leftover = blk_rq_bytes(req);
>
> if (error)
> blk_end_request(req, -EIO, leftover);
Note:
This can be blk_end_request_all() and "int leftover =" dropped.
> diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
> index 6605ec9..531af9e 100644
> --- a/drivers/scsi/libsas/sas_expander.c
> +++ b/drivers/scsi/libsas/sas_expander.c
> @@ -1927,13 +1927,13 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> /* do we need to support multiple segments? */
> if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
> printk("%s: multiple segments req %u %u, rsp %u %u\n",
> - __func__, req->bio->bi_vcnt, req->data_len,
> - rsp->bio->bi_vcnt, rsp->data_len);
> + __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
> + rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
> return -EINVAL;
> }
>
> - ret = smp_execute_task(dev, bio_data(req->bio), req->data_len,
> - bio_data(rsp->bio), rsp->data_len);
> + ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
> + bio_data(rsp->bio), blk_rq_bytes(rsp));
> if (ret > 0) {
> /* positive number is the untransferred residual */
> rsp->resid_len = ret;
> diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
> index 89952ed..be9a951 100644
> --- a/drivers/scsi/libsas/sas_host_smp.c
> +++ b/drivers/scsi/libsas/sas_host_smp.c
> @@ -137,21 +137,21 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
> int error = -EINVAL;
>
> /* eight is the minimum size for request and response frames */
> - if (req->data_len < 8 || rsp->data_len < 8)
> + if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
> goto out;
>
> - if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
> - bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
> + if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
> + bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
> shost_printk(KERN_ERR, shost,
> "SMP request/response frame crosses page boundary");
> goto out;
> }
>
> - req_data = kzalloc(req->data_len, GFP_KERNEL);
> + req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
>
> /* make sure frame can always be built ... we copy
> * back only the requested length */
> - resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
> + resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
>
> if (!req_data || !resp_data) {
> error = -ENOMEM;
> @@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
>
> local_irq_disable();
> buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
> - memcpy(req_data, buf, req->data_len);
> + memcpy(req_data, buf, blk_rq_bytes(req));
> kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
> local_irq_enable();
>
> @@ -176,8 +176,8 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
> resp_data[1] = req_data[1];
> resp_data[2] = SMP_RESP_FUNC_UNK;
>
> - req->resid_len = req->data_len;
> - rsp->resid_len = rsp->data_len;
> + req->resid_len = blk_rq_bytes(req);
> + rsp->resid_len = blk_rq_bytes(rsp);
>
> switch (req_data[1]) {
> case SMP_REPORT_GENERAL:
> @@ -264,7 +264,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
>
> local_irq_disable();
> buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
> - memcpy(buf, resp_data, rsp->data_len);
> + memcpy(buf, resp_data, blk_rq_bytes(rsp));
> flush_kernel_dcache_page(bio_page(rsp->bio));
> kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
> local_irq_enable();
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
> index 53759c5..af95a44 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
> +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
> @@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
> printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, "
> "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt,
> - req->data_len, rsp->bio->bi_vcnt, rsp->data_len);
> + blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
> return -EINVAL;
> }
>
> @@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> *((u64 *)&mpi_request->SASAddress) = (rphy) ?
> cpu_to_le64(rphy->identify.sas_address) :
> cpu_to_le64(ioc->sas_hba.sas_address);
> - mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4);
> + mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
> psge = &mpi_request->SGL;
>
> /* WRITE sgel first */
> @@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
> sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
> dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
> - req->data_len, PCI_DMA_BIDIRECTIONAL);
> + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
> if (!dma_addr_out) {
> mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
> goto unmap;
> }
>
> - ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4),
> + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4),
> dma_addr_out);
>
> /* incr sgel */
> @@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
> MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
> MPI2_SGE_FLAGS_END_OF_LIST);
> sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
> - dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
> - rsp->data_len, PCI_DMA_BIDIRECTIONAL);
> + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
> + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
> if (!dma_addr_in) {
> mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
> goto unmap;
> }
>
> - ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4),
> + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4),
> dma_addr_in);
>
> dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
> @@ -1170,7 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
>
> memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
> req->sense_len = sizeof(*mpi_reply);
> - rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength;
> + rsp->resid_len = blk_rq_bytes(rsp) -
> + mpi_reply->ResponseDataLength;
> } else {
> dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
> "%s - no reply\n", ioc->name, __func__));
> @@ -1186,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
>
> unmap:
> if (dma_addr_out)
> - pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len,
> + pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
> PCI_DMA_BIDIRECTIONAL);
> if (dma_addr_in)
> - pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len,
> + pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
> PCI_DMA_BIDIRECTIONAL);
>
> out:
> diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
> index 2a5f077..d178a8b 100644
> --- a/drivers/scsi/osd/osd_initiator.c
> +++ b/drivers/scsi/osd/osd_initiator.c
> @@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or,
> return ret;
> }
> OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n",
> - _LLU(or->out.total_bytes), or->out.req->data_len);
> + _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req));
> }
> if (or->in.bio) {
> ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio);
> @@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or,
> return ret;
> }
> OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n",
> - _LLU(or->in.total_bytes), or->in.req->data_len);
> + _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req));
> }
>
> or->out.pad_buff = sg_out_pad_buffer;
Ack-by: Boaz Harrosh <bharrosh@...asas.com>
Stupid prints. I'll Q a patch that removes them once this is accepted.
Thanks.
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 39b3acf..3d16c70 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers);
> static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
> {
> struct request *req = cmd->request;
> - unsigned int dlen = req->data_len;
> - unsigned int next_dlen = req->next_rq->data_len;
>
> req->resid_len = scsi_out(cmd)->resid;
> req->next_rq->resid_len = scsi_in(cmd)->resid;
>
> /* The req and req->next_rq have not been completed */
> - BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
> + BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req),
> + blk_rq_bytes(req->next_rq)));
>
> scsi_release_buffers(cmd);
>
> @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
> BUG_ON(count > sdb->table.nents);
> sdb->table.nents = count;
> if (blk_pc_request(req))
> - sdb->length = req->data_len;
> + sdb->length = blk_rq_bytes(req);
> else
> sdb->length = blk_rq_sectors(req) << 9;
> return BLKPREP_OK;
> @@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
> if (unlikely(ret))
> return ret;
> } else {
> - BUG_ON(req->data_len);
> + BUG_ON(blk_rq_bytes(req));
>
> memset(&cmd->sdb, 0, sizeof(cmd->sdb));
> req->buffer = NULL;
> }
>
> cmd->cmd_len = req->cmd_len;
> - if (!req->data_len)
> + if (!blk_rq_bytes(req))
> cmd->sc_data_direction = DMA_NONE;
> else if (rq_data_dir(req) == WRITE)
> cmd->sc_data_direction = DMA_TO_DEVICE;
> else
> cmd->sc_data_direction = DMA_FROM_DEVICE;
>
> - cmd->transfersize = req->data_len;
> + cmd->transfersize = blk_rq_bytes(req);
> cmd->allowed = req->retries;
> return BLKPREP_OK;
> }
Reviewed-by: Boaz Harrosh <bharrosh@...asas.com>
> diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
> index 48ba413..1030327 100644
> --- a/drivers/scsi/scsi_tgt_lib.c
> +++ b/drivers/scsi/scsi_tgt_lib.c
> @@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
> * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
> * length for us.
> */
> - cmd->sdb.length = rq->data_len;
> + cmd->sdb.length = blk_rq_bytes(rq);
Note to self:
This code and the comment is wrong scsi_init_io does set everything right. It should be dropped.
Once everything settles, I'll send a patch to remove this.
>
> return 0;
>
I've reviewed all the scsi parts.
(We had a 24 hours internet outage so these replys where delayed)
Thanks
Boaz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists