Message-Id: <20090512092757.048938233@denx.de>
Date:	Tue, 12 May 2009 11:27:57 +0200
From:	Wolfgang Grandegger <wg@...ndegger.com>
To:	netdev@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org
Subject: [PATCH v2 0/7] can: CAN network device driver interface and drivers

Hello,

here comes v2 of the patch series posted some time ago. See

  http://marc.info/?l=linux-netdev&m=123507025810612&w=4.

Changes since v1:

- The SysFS interface has been replaced by the Netlink interface as
  suggested by Patrick. For further information have a look to
  chapter 6.5 of "Documentation/networking/can.txt" and the header
  file "include/linux/can/netdev.h". The patch for the "ip" program of
  the iproute2 utility suite will be provided separately.

- The restart function is now properly protected by "dev->tx_lock"
  using the "netif_tx_[lock|unlock]" functions.

- For the  restart, the device driver must now handle CAN_MODE_STOP as
  well, apart from CAN_MODE_START to avoid race conditions.

- The "irq_lock" member of "struct can_priv" has been removed. The CAN
  controller driver may should provide its own synchronization if
  necessary.

- The restart function is now protected by "dev->tx_lock" using the
  "netif_tx_lock/unlock" functions.

- Cleanup timer usage for the restart function.

- The unused do_set/get_ctrlmode member of "struct can_priv" have been
  removed.

- "const" has been added to "struct net_device" for some functions not
  allowed to touch that structure.

- The library functions "can_set_bittiming" and "can_close_cleanup" have
  been renamed to the more general names "open_candev" and
  "close_candev", respectively.

- Use "del_timer_sync" instead of "del_timer" for the  re-start timer.

- The macro "ND2D()" has been replaced by "dev->dev.parent" as it does
  not make the code more readable.

- Fix improper BTR setting for triple-sampling for the SJA1000 as
  pointed out by Oliver.

- Dont use __u8 but __u32 as before for some members of "struct
  can_bittiming[_const]" to avoid alignment trouble.

- Definitions shared with user-space applications have been moved to
  "include/linux/can/netlink.h".

- Various other minor correction suggested on the netdev ML.

- The MSCAN driver for the MPC5200 has been removed. It needs to be
  presented on the Linuxppc-dev and Devicetree-discuss ML as well,
  which will be done by a sub-sequent patch.

- Add more source code documentation, especially for the structures
  and functions related to bit-timing.

The PF_CAN protocol family for the Controller Area Network is available
in the kernel since version 2.6.25 but drivers for real CAN devices are
still missing. This patch series adds a generic CAN network device
driver interface and, as a start, a few drivers. It is the result of the
on-going discussion and development of the Socket-CAN project hosted at
the BerliOS web-server (http://developer.berlios.de/projects/socketcan).
The patch series consists of the following patches:

 1/8) can: Documentation for the CAN device driver interface
 2/8) can: Update MAINTAINERS and CREDITS file
 3/8) can: CAN Network device driver and Netlink interface
 4/8) can: Driver for the SJA1000 CAN controller
 5/8) can: SJA1000 generic platform bus driver
 6/8) can: SJA1000 driver for EMS PCI cards
 7/8) can: SJA1000 driver for Kvaser PCI cards

Please consider these patches for inclusion.

Thanks,

Wolfgang.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists