| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1242364293-29223-4-git-send-email-petkovbb@gmail.com>
Date: Fri, 15 May 2009 07:11:21 +0200
From: Borislav Petkov <petkovbb@...glemail.com>
To: <bzolnier@...il.com>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 03/15] ide-atapi: switch to rq->resid_len
Now that we have rq->resid_len, use it to account partial completion
amount during the lifetime of an rq, decrementing it on each successful
transfer. As a result, get rid of now unused pc->xferred.
While at it, remove noisy debug call in ide_prep_sense.
Signed-off-by: Borislav Petkov <petkovbb@...il.com>
---
drivers/ide/ide-atapi.c | 19 ++++++++-----------
drivers/ide/ide-tape.c | 12 +++++-------
include/linux/ide.h | 2 --
3 files changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7129495..1022e42 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -172,8 +172,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
unsigned int cmd_len, sense_len;
int err;
- debug_log("%s: enter\n", __func__);
-
switch (drive->media) {
case ide_floppy:
cmd_len = 255;
@@ -370,7 +368,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
? "write" : "read");
pc->flags |= PC_FLAG_DMA_ERROR;
} else
- pc->xferred = blk_rq_bytes(rq);
+ rq->resid_len = 0;
debug_log("%s: DMA finished\n", drive->name);
}
@@ -379,7 +377,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
int uptodate, error;
debug_log("Packet command completed, %d bytes transferred\n",
- pc->xferred);
+ blk_rq_bytes(rq));
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
@@ -467,15 +465,15 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
ide_pio_bytes(drive, cmd, write, done);
/* Update transferred byte count */
- pc->xferred += done;
+ rq->resid_len -= done;
bcount -= done;
if (bcount)
ide_pad_transfer(drive, write, bcount);
- debug_log("[cmd %x] transferred %d bytes, padded %d bytes\n",
- rq->cmd[0], done, bcount);
+ debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n",
+ rq->cmd[0], done, bcount, rq->resid_len);
/* And set the interrupt handler again */
ide_set_handler(drive, ide_pc_intr, timeout);
@@ -643,16 +641,15 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
} else {
pc = drive->pc;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
-
valid_tf = IDE_VALID_DEVICE;
bytes = blk_rq_bytes(rq);
-
bcount = ((drive->media == ide_tape) ? bytes
: min_t(unsigned int,
bytes, 63 * 1024));
+ /* We haven't transferred any data yet */
+ rq->resid_len = bcount;
+
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
ide_dma_off(drive);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index aaeef12..c933709 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -301,11 +301,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
- /* Correct pc->xferred by asking the tape. */
+ /* correct remaining bytes to transfer */
if (pc->flags & PC_FLAG_DMA_ERROR)
- pc->xferred = blk_rq_bytes(rq) -
- tape->blk_size *
- get_unaligned_be32(&sense[3]);
+ rq->resid_len = tape->blk_size * get_unaligned_be32(&sense[3]);
/*
* If error was the result of a zero-length read or write command,
@@ -339,7 +337,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
pc->flags |= PC_FLAG_ABORT;
}
if (!(pc->flags & PC_FLAG_ABORT) &&
- pc->xferred)
+ (blk_rq_bytes(rq) - rq->resid_len))
pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
}
}
@@ -369,7 +367,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
"itself - Aborting request!\n");
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
- int blocks = pc->xferred / tape->blk_size;
+ unsigned int blocks =
+ (blk_rq_bytes(rq) - rq->resid_len) / tape->blk_size;
tape->avg_size += blocks * tape->blk_size;
@@ -381,7 +380,6 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
}
tape->first_frame += blocks;
- rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size;
if (pc->error) {
uptodate = 0;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 34c128f..745a393 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -357,8 +357,6 @@ struct ide_atapi_pc {
/* bytes to transfer */
int req_xfer;
- /* bytes actually transferred */
- int xferred;
/* data buffer */
u8 *buf;
--
1.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists