linux-kernel - Re: Oops in usb-serial with keyspan adapter on current upstream

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1242695149.16901.17.camel@pasglop>
Date:	Tue, 19 May 2009 11:05:49 +1000
From:	Benjamin Herrenschmidt <benh@...nel.crashing.org>
To:	Alan Stern <stern@...land.harvard.edu>
Cc:	"Rafael J. Wysocki" <rjw@...k.pl>,
	Linux Kernel list <linux-kernel@...r.kernel.org>,
	linux-usb@...r.kernel.org
Subject: Re: Oops in usb-serial with keyspan adapter on current upstream

On Mon, 2009-05-18 at 11:06 -0400, Alan Stern wrote:
> On Mon, 18 May 2009, Benjamin Herrenschmidt wrote:
> 
> > Hi folks !
> > 
> > Current kernels give the oops below at boot with my Keyspan plugged,
> > used to work fine on 2.6.28 at least.
> 
> Does your test kernel include commit 
> 2d93148ab6988cad872e65d694c95e8944e1b626?

Yes, it appears so.

> > It looks to me like some kind of race between the disconnection after
> > the FW load and the re-connect but I'm not sure.
> 
> I don't think that's quite right.  Your trace shows the oops occurred 
> during the disconnect processing, which means the re-connect had not 
> yet started.

Right. It shows that we re-enter device_del in fact which sounds fishy
unless it's for a different device. I'll get more data for you.

Cheers,
Ben.

> > Cheers,
> > Ben.
> > 
> > usbcore: registered new interface driver usbserial
> > USB Serial support registered for generic
> > usbcore: registered new interface driver usbserial_generic
> > usbserial: USB Serial Driver core
> > USB Serial support registered for Keyspan - (without firmware)
> > USB Serial support registered for Keyspan 1 port adapter
> > USB Serial support registered for Keyspan 2 port adapter
> > USB Serial support registered for Keyspan 4 port adapter
> > keyspan 2-1:1.0: Keyspan - (without firmware) converter detected
> > usb 2-1: firmware: using built-in firmware keyspan/usa49w.fw
> > usb 2-1: USB disconnect, address 2
> > usbcore: registered new interface driver keyspan
> > keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
> > Unable to handle kernel paging request for data at address 0x00000010
> > Faulting instruction address: 0xc0000000002da15c
> > Oops: Kernel access of bad area, sig: 11 [#1]
> > SMP NR_CPUS=4 PowerMac
> > Modules linked in: snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd keyspan uninorth_agp usbserial agpgart soundcore
> > NIP: c0000000002da15c LR: c0000000002d3760 CTR: c0000000002d35ec
> > REGS: c00000017a4cb4c0 TRAP: 0300   Not tainted  (2.6.30-rc6-00037-g8646010-dirty)
> > MSR: 9000000000009032 <EE,ME,IR,DR>  CR: 24000024  XER: 200fffff
> > DAR: 0000000000000010, DSISR: 0000000040000000
> > TASK = c00000017a4890e0[191] 'khubd' THREAD: c00000017a4c8000 CPU: 2
> > GPR00: c000000000755f30 c00000017a4cb740 c000000000783d48 0000000000000001 
> > GPR04: 0000000000000000 c0000001783fba90 0000000000000001 0000000000000000 
> > GPR08: 0000000000000000 0000000000000000 0000000000000000 c0000000002d35ec 
> > GPR12: 0000000024000082 c0000000007b5680 0000000000000002 c0000001781c0a30 
> > GPR16: 00000000000003e8 0000000000000000 c0000001781fd000 c0000001781c0a30 
> > GPR20: 0000000000000000 0000000000000000 c0000001781fd800 0000000000000001 
> > GPR24: c00000017a41a600 c0000001789ab480 c0000001783fb998 0000000000000000 
> > GPR28: 0000000000000000 c00000017a4cb7b0 c00000000070f8d0 0000000000000000 
> > NIP [c0000000002da15c] .release_nodes+0x54/0x254
> > LR [c0000000002d3760] .device_del+0x174/0x1e8
> > Call Trace:
> > [c00000017a4cb740] [c00000017a4cb880] 0xc00000017a4cb880 (unreliable)
> > [c00000017a4cb7f0] [c0000000002d3760] .device_del+0x174/0x1e8
> 
> Is it possible to pin this down to a single bad data access or 
> instruction?
> 
> Alan Stern
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/