| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090522175501.GA673@rere.qmqm.pl>
Date: Fri, 22 May 2009 19:55:01 +0200
From: Michał Mirosław <mirq-linux@...e.qmqm.pl>
To: Pierre Ossman <pierre@...man.eu>
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 2.6.29.3] Driver for CB710/720 memory card reader (MMC
part) - v5
Here is a version of the CB710 SD/MMC reader driver ready for inclusion
upstream. The code is divided in two parts. There is a virtual 'bus' driver
that handles PCI device and registers three new devices one per card reader
type. The other driver handles SD/MMC part of the reader.
Changes from v4:
- sg_mapping_iterator extension renamed to avoid namespace clashes
when/if the extension would be merged upstream
- appended sgbuf2.h to cb710.h
- move from IDR to IDA for device ID generation
- cleanup after IDA on module unload
- added MAINTAINERS entry
Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
diff -urpN linux-2.6.29.3/drivers/misc/cb710/core.c test2/drivers/misc/cb710/core.c
--- linux-2.6.29.3/drivers/misc/cb710/core.c 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/misc/cb710/core.c 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,357 @@
+/*
+ * cb710/core.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+ int reg, uint32_t mask, uint32_t xor)
+{
+ u32 rval;
+
+ pci_read_config_dword(pdev, reg, &rval);
+ rval = (rval & mask) ^ xor;
+ pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+ unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+ u32 val;
+
+ cb710_pci_update_config_reg(pdev, 0x48,
+ ~0x000000FF, 0x0000003F);
+
+ pci_read_config_dword(pdev, 0x48, &val);
+ if (val & 0x80000000)
+ return 0;
+
+ if (!pdev0)
+ return -ENODEV;
+
+ if (pdev0->vendor == PCI_VENDOR_ID_ENE
+ && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+ cb710_pci_update_config_reg(pdev0, 0x8C,
+ ~0x00F00000, 0x00100000);
+ cb710_pci_update_config_reg(pdev0, 0xB0,
+ ~0x08000000, 0x08000000);
+ }
+
+ cb710_pci_update_config_reg(pdev0, 0x8C,
+ ~0x00000F00, 0x00000200);
+ cb710_pci_update_config_reg(pdev0, 0x90,
+ ~0x00060000, 0x00040000);
+
+ pci_dev_put(pdev0);
+
+ return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+ struct cb710_chip *chip = data;
+ struct cb710_slot *slot = &chip->slot[0];
+ irqreturn_t handled = IRQ_NONE;
+ unsigned nr;
+
+ spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+ for (nr = chip->slots; nr; ++slot, --nr) {
+ cb710_irq_handler_t handler_func = slot->irq_handler;
+ if (handler_func && handler_func(slot))
+ handled = IRQ_HANDLED;
+ }
+
+ spin_unlock(&chip->irq_lock);
+
+ return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+ /* slot struct can be freed now */
+ atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+ unsigned slot_mask, unsigned io_offset, const char *name)
+{
+ int nr = chip->slots;
+ struct cb710_slot *slot = &chip->slot[nr];
+ int err;
+
+ dev_dbg(cb710_chip_dev(chip),
+ "register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+ name, chip->platform_id, nr, slot_mask, io_offset);
+
+ /* slot->irq_handler == NULL here; this needs to be
+ * seen before platform_device_register() */
+ ++chip->slots;
+ smp_wmb();
+
+ slot->iobase = chip->iobase + io_offset;
+ slot->pdev.name = name;
+ slot->pdev.id = chip->platform_id;
+ slot->pdev.dev.parent = &chip->pdev->dev;
+ slot->pdev.dev.release = cb710_release_slot;
+
+ err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ atomic_inc(&chip->slot_refs_count);
+#endif
+
+ if (err) {
+ /* device_initialize() called from platform_device_register()
+ * wants this on error path */
+ platform_device_put(&slot->pdev);
+
+ /* slot->irq_handler == NULL here anyway, so no lock needed */
+ --chip->slots;
+ return err;
+ }
+
+ chip->slot_mask |= slot_mask;
+
+ return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+ unsigned slot_mask)
+{
+ int nr = chip->slots - 1;
+
+ if (!(chip->slot_mask & slot_mask))
+ return;
+
+ platform_device_unregister(&chip->slot[nr].pdev);
+
+ /* complementary to spin_unlock() in cb710_set_irq_handler() */
+ smp_rmb();
+ BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+ /* slot->irq_handler == NULL here, so no lock needed */
+ --chip->slots;
+ chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+ cb710_irq_handler_t handler)
+{
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->irq_lock, flags);
+ slot->irq_handler = handler;
+ spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+ free_irq(pdev->irq, chip);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ if (state.event & PM_EVENT_SLEEP)
+ pci_set_power_state(pdev, PCI_D3cold);
+ return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+ int err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ return devm_request_irq(&pdev->dev, pdev->irq,
+ cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct cb710_chip *chip;
+ unsigned long flags;
+ u32 val;
+ int err;
+ int n = 0;
+
+ err = cb710_pci_configure(pdev);
+ if (err)
+ return err;
+
+ /* this is actually magic... */
+ pci_read_config_dword(pdev, 0x48, &val);
+ if (!(val & 0x80000000)) {
+ pci_write_config_dword(pdev, 0x48, val|0x71000000);
+ pci_read_config_dword(pdev, 0x48, &val);
+ }
+
+ dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+ if (!(val & 0x70000000))
+ return -ENODEV;
+ val = (val >> 28) & 7;
+ if (val & CB710_SLOT_MMC)
+ ++n;
+ if (val & CB710_SLOT_MS)
+ ++n;
+ if (val & CB710_SLOT_SM)
+ ++n;
+
+ chip = devm_kzalloc(&pdev->dev,
+ sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+ if (err)
+ return err;
+
+ chip->pdev = pdev;
+ chip->iobase = pcim_iomap_table(pdev)[0];
+
+ pci_set_drvdata(pdev, chip);
+
+ err = devm_request_irq(&pdev->dev, pdev->irq,
+ cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+ if (err)
+ return err;
+
+ do {
+ if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock_irqsave(&cb710_ida_lock, flags);
+ err = ida_get_new(&cb710_ida, &chip->platform_id);
+ spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+ if (err && err != -EAGAIN)
+ return err;
+ } while (err);
+
+
+ dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+ chip->platform_id, chip->iobase, pdev->irq);
+
+ if (val & CB710_SLOT_MMC) { /* MMC/SD slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_MMC, 0x00, "cb710-mmc");
+ if (err)
+ return err;
+ }
+
+ if (val & CB710_SLOT_MS) { /* MemoryStick slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_MS, 0x40, "cb710-ms");
+ if (err)
+ goto unreg_mmc;
+ }
+
+ if (val & CB710_SLOT_SM) { /* SmartMedia slot */
+ err = cb710_register_slot(chip,
+ CB710_SLOT_SM, 0x60, "cb710-sm");
+ if (err)
+ goto unreg_ms;
+ }
+
+ return 0;
+unreg_ms:
+ cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+ cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+ return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+ struct cb710_chip *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ cb710_unregister_slot(chip, CB710_SLOT_SM);
+ cb710_unregister_slot(chip, CB710_SLOT_MS);
+ cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+ spin_lock_irqsave(&cb710_ida_lock, flags);
+ ida_remove(&cb710_ida, chip->platform_id);
+ spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+ { PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, }
+};
+
+static struct pci_driver cb710_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = cb710_pci_tbl,
+ .probe = cb710_probe,
+ .remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+ .suspend = cb710_suspend,
+ .resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+ return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+ pci_unregister_driver(&cb710_driver);
+ ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@...e.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff -urpN linux-2.6.29.3/drivers/misc/cb710/debug.c test2/drivers/misc/cb710/debug.c
--- linux-2.6.29.3/drivers/misc/cb710/debug.c 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/misc/cb710/debug.c 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,119 @@
+/*
+ * cb710/debug.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT 0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+ 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+ 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+ "MMC", "MMC", "MMC", "MMC",
+ "MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+ unsigned mask = (1 << bits/8) - 1;
+ offset *= bits/8;
+ return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t) \
+static void cb710_read_regs_##t(void __iomem *iobase, \
+ u##t *reg, unsigned select) \
+{ \
+ unsigned i, j; \
+ \
+ for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
+ if (!select & (1 << i)) \
+ continue; \
+ \
+ for (j = 0; j < 0x10/(t/8); ++j) { \
+ if (!allow_reg_read(i, j, t)) \
+ continue; \
+ reg[j] = ioread##t(iobase \
+ + (i << 4) + (j * (t/8))); \
+ } \
+ } \
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t) \
+static void cb710_dump_regs_##t(struct device *dev, \
+ const u##t *reg, unsigned select) \
+{ \
+ const char *const xp = &cb710_xes[8 - t/4]; \
+ const char *const format = cb710_regf_##t; \
+ \
+ char msg[100], *p; \
+ unsigned i, j; \
+ \
+ for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \
+ if (!(select & (1 << i))) \
+ continue; \
+ p = msg; \
+ for (j = 0; j < 0x10/(t/8); ++j) { \
+ *p++ = ' '; \
+ if (j == 8/(t/8)) \
+ *p++ = ' '; \
+ if (allow_reg_read(i, j, t)) \
+ p += sprintf(p, format, reg[j]); \
+ else \
+ p += sprintf(p, "%s", xp); \
+ } \
+ dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \
+ } \
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \
+ unsigned select) \
+{ \
+ u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \
+ \
+ memset(®s, 0, sizeof(regs)); \
+ cb710_read_regs_##t(chip->iobase, regs, select); \
+ cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t) \
+ CB710_READ_REGS_TEMPLATE(t) \
+ CB710_DUMP_REGS_TEMPLATE(t) \
+ CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+ if (!(select & CB710_DUMP_REGS_MASK))
+ select = CB710_DUMP_REGS_ALL;
+ if (!(select & CB710_DUMP_ACCESS_MASK))
+ select |= CB710_DUMP_ACCESS_8;
+
+ if (select & CB710_DUMP_ACCESS_32)
+ cb710_read_and_dump_regs_32(chip, select);
+ if (select & CB710_DUMP_ACCESS_16)
+ cb710_read_and_dump_regs_16(chip, select);
+ if (select & CB710_DUMP_ACCESS_8)
+ cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff -urpN linux-2.6.29.3/drivers/misc/cb710/Kconfig test2/drivers/misc/cb710/Kconfig
--- linux-2.6.29.3/drivers/misc/cb710/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/misc/cb710/Kconfig 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,21 @@
+config CB710_CORE
+ tristate "ENE CB710/720 Flash memory card reader support"
+ depends on PCI
+ help
+ This option enables support for PCI ENE CB710/720 Flash memory card
+ reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+ You will also have to select some flash card format drivers (MMC/SD,
+ MemoryStick).
+
+ This driver can also be built as a module. If so, the module
+ will be called cb710.
+
+config CB710_DEBUG
+ bool "Enable driver debugging"
+ depends on CB710_CORE != n
+ default n
+ help
+ This is an option for use by developers; most people should
+ say N here. This adds a lot of debugging output to dmesg.
+
diff -urpN linux-2.6.29.3/drivers/misc/cb710/Makefile test2/drivers/misc/cb710/Makefile
--- linux-2.6.29.3/drivers/misc/cb710/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/misc/cb710/Makefile 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,4 @@
+obj-$(CONFIG_CB710_CORE) += cb710.o
+
+cb710-y := core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG) += debug.o
diff -urpN linux-2.6.29.3/drivers/misc/cb710/sgbuf2.c test2/drivers/misc/cb710/sgbuf2.c
--- linux-2.6.29.3/drivers/misc/cb710/sgbuf2.c 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/misc/cb710/sgbuf2.c 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,150 @@
+/*
+ * cb710/sgbuf2.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+ if (sg_miter_next(miter)) {
+ miter->consumed = 0;
+ return true;
+ } else
+ return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+ return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+ size_t len, left = 4;
+ uint32_t data;
+ void *addr = &data;
+
+ do {
+ len = min(miter->length - miter->consumed, left);
+ memcpy(addr, miter->addr + miter->consumed, len);
+ miter->consumed += len;
+ left -= len;
+ if (!left)
+ return data;
+ addr += len;
+ } while (sg_dwiter_next(miter));
+
+ memset(addr, 0, left);
+ return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ return false;
+#else
+ return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+ size_t len;
+
+ if (sg_dwiter_is_at_end(miter))
+ return true;
+
+ len = miter->length - miter->consumed;
+
+ if (likely(len >= 4 && !needs_unaligned_copy(
+ miter->addr + miter->consumed))) {
+ *ptr = miter->addr + miter->consumed;
+ miter->consumed += 4;
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ * Returns 32-bit word starting at byte pointed to by @miter@
+ * handling any alignment issues. Bytes past the buffer's end
+ * are not accessed (read) but are returned as zeroes. @miter@
+ * is advanced by 4 bytes or to the end of buffer whichever is
+ * closer.
+ *
+ * Context:
+ * Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ * 32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+ uint32_t *ptr = NULL;
+
+ if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+ return ptr ? *ptr : 0;
+
+ return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+ size_t len, left = 4;
+ void *addr = &data;
+
+ do {
+ len = min(miter->length - miter->consumed, left);
+ memcpy(miter->addr, addr, len);
+ miter->consumed += len;
+ left -= len;
+ if (!left)
+ return;
+ addr += len;
+ flush_kernel_dcache_page(miter->page);
+ } while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ * Writes 32-bit word starting at byte pointed to by @miter@
+ * handling any alignment issues. Bytes which would be written
+ * past the buffer's end are silently discarded. @miter@ is
+ * advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ * Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+ uint32_t *ptr = NULL;
+
+ if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+ if (ptr)
+ *ptr = data;
+ else
+ return;
+ } else
+ sg_dwiter_write_slow(miter, data);
+
+ if (miter->length == miter->consumed)
+ flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff -urpN linux-2.6.29.3/drivers/misc/Kconfig test2/drivers/misc/Kconfig
--- linux-2.6.29.3/drivers/misc/Kconfig 2009-03-24 00:12:14.000000000 +0100
+++ test2/drivers/misc/Kconfig 2009-05-22 19:47:19.000000000 +0200
@@ -225,5 +225,6 @@ config DELL_LAPTOP
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
endif # MISC_DEVICES
diff -urpN linux-2.6.29.3/drivers/misc/Makefile test2/drivers/misc/Makefile
--- linux-2.6.29.3/drivers/misc/Makefile 2009-03-24 00:12:14.000000000 +0100
+++ test2/drivers/misc/Makefile 2009-05-22 19:47:19.000000000 +0200
@@ -20,3 +20,4 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
+obj-y += cb710/
diff -urpN linux-2.6.29.3/drivers/mmc/host/cb710-mmc.c test2/drivers/mmc/host/cb710-mmc.c
--- linux-2.6.29.3/drivers/mmc/host/cb710-mmc.c 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/mmc/host/cb710-mmc.c 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,804 @@
+/*
+ * cb710/mmc.c
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/* 1, 2, 4, 8, 16, 32, 128, 512 */
+ 0, 1, 2, 3, 4, 5, 7, 9
+};
+#define CB710_MAX_DIVIDER_IDX \
+ (ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+ 33, 10, 20, 25, 30, 35, 40, 45,
+ 50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+ u32 src_freq_idx;
+ u32 divider_idx;
+ int src_hz;
+
+ /* this is magic, unverifiable for me, unless I get
+ * MMC card with cables connected to bus signals */
+ pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+ src_freq_idx = (src_freq_idx >> 16) & 0xF;
+ src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+ for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+ if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+ break;
+ }
+
+ if (src_freq_idx)
+ divider_idx |= 0x8;
+
+ cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+ dev_dbg(cb710_slot_dev(slot),
+ "clock set to %d Hz, wanted %d Hz; flag = %d\n",
+ src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+ hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+ unsigned short enable, unsigned short mask)
+{
+ /* clear global IE
+ * - it gets set later if any interrupt sources are enabled */
+ mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+ /* look like interrupt is fired whenever
+ * WORD[0x0C] & WORD[0x10] != 0;
+ * -> bit 15 port 0x0C seems to be global interrupt enable
+ */
+
+ enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+ & ~mask) | enable;
+
+ if (enable)
+ enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+ cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+ unsigned short enable, unsigned short mask)
+{
+ struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+ unsigned long flags;
+
+ spin_lock_irqsave(&reader->irq_lock, flags);
+ /* this is the only thing irq_lock protects */
+ __cb710_mmc_enable_irq(slot, enable, mask);
+ spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+ return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+ & CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+ dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+ enable ? 4 : 1, enable ? "s" : "");
+ if (enable)
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+ CB710_MMC_C1_4BIT_DATA_BUS, 0);
+ else
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+ 0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+ u16 status;
+
+ status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+ if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+ /* it is just a guess, so log it */
+ dev_dbg(cb710_slot_dev(slot),
+ "CHECK : ignoring bit 6 in status %04X\n", status);
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+ CB710_MMC_S0_FIFO_UNDERFLOW);
+ status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+ }
+
+ if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+ dev_dbg(cb710_slot_dev(slot),
+ "CHECK : returning EIO on status %04X\n", status);
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+ CB710_MMC_S1_RESET);
+ return -EIO;
+ }
+
+ /* 'what' is a bit in MMC_STATUS1 */
+ if ((status >> 8) & what) {
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+ int err = 0;
+ unsigned limit = 2000000; /* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+ u32 e, x;
+ e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+ while (!(err = cb710_check_event(slot, what))) {
+ if (!--limit) {
+ cb710_dump_regs(cb710_slot_to_chip(slot),
+ CB710_DUMP_REGS_MMC);
+ err = -ETIMEDOUT;
+ break;
+ }
+ udelay(1);
+ }
+
+#ifdef CONFIG_CB710_DEBUG
+ x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+ limit = 2000000 - limit;
+ if (limit > 100)
+ dev_dbg(cb710_slot_dev(slot),
+ "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+ limit, what, e, x);
+#endif
+ return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+ unsigned limit = 500000; /* FIXME: real timeout */
+ int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+ u32 e, x;
+ e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+ while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+ if (!--limit) {
+ cb710_dump_regs(cb710_slot_to_chip(slot),
+ CB710_DUMP_REGS_MMC);
+ err = -ETIMEDOUT;
+ break;
+ }
+ udelay(1);
+ }
+
+#ifdef CONFIG_CB710_DEBUG
+ x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+ limit = 500000 - limit;
+ if (limit > 100)
+ dev_dbg(cb710_slot_dev(slot),
+ "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+ limit, mask, e, x);
+#endif
+ return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+ size_t count, size_t blocksize)
+{
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+ ((count - 1) << 16)|(blocksize - 1));
+
+ dev_vdbg(cb710_slot_dev(slot), "set up for %d block%s of %d bytes\n",
+ count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+ /* without this, received data is prepended with 8-bytes of zeroes */
+ u32 r1, r2;
+ int ok = 0;
+
+ r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+ r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+ if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+ & CB710_MMC_S0_FIFO_UNDERFLOW) {
+ cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+ CB710_MMC_S0_FIFO_UNDERFLOW);
+ ok = 1;
+ }
+
+ dev_dbg(cb710_slot_dev(slot),
+ "FIFO-read-hack: expected STATUS0 bit was %s\n",
+ ok ? "set." : "NOT SET!");
+ dev_dbg(cb710_slot_dev(slot),
+ "FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+ r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+ struct sg_mapping_iter *miter, size_t dw_count)
+{
+ if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+ int err = cb710_wait_for_event(slot,
+ CB710_MMC_S1_PIO_TRANSFER_DONE);
+ if (err)
+ return err;
+ }
+
+ cb710_sg_dwiter_write_from_io(miter,
+ slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+ return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+ return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ size_t len, blocks = data->blocks;
+ int err = 0;
+
+ /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+ * except single 8B block */
+ if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+ return -EINVAL;
+
+ sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ 15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ cb710_mmc_fifo_hack(slot);
+
+ while (blocks-- > 0) {
+ len = data->blksz;
+
+ while (len >= 16) {
+ err = cb710_mmc_receive_pio(slot, &miter, 4);
+ if (err)
+ goto out;
+ len -= 16;
+ }
+
+ if (!len)
+ continue;
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ len = (len >= 8) ? 4 : 2;
+ err = cb710_mmc_receive_pio(slot, &miter, len);
+ if (err)
+ goto out;
+ }
+out:
+ cb710_sg_miter_stop_writing(&miter);
+ return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ size_t len, blocks = data->blocks;
+ int err = 0;
+
+ /* TODO: I don't know how/if the hardware handles multiple
+ * non-16B-boundary blocks */
+ if (unlikely(data->blocks > 1 && data->blksz & 15))
+ return -EINVAL;
+
+ sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+ 0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+ while (blocks-- > 0) {
+ len = (data->blksz + 15) >> 4;
+ do {
+ if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+ & CB710_MMC_S2_FIFO_EMPTY)) {
+ err = cb710_wait_for_event(slot,
+ CB710_MMC_S1_PIO_TRANSFER_DONE);
+ if (err)
+ goto out;
+ }
+ cb710_sg_dwiter_read_to_io(&miter,
+ slot->iobase + CB710_MMC_DATA_PORT, 4);
+ } while (--len);
+ }
+out:
+ sg_miter_stop(&miter);
+ return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+ struct mmc_command *cmd)
+{
+ unsigned int flags = cmd->flags;
+ u16 cb_flags = 0;
+
+ /* Windows driver returned 0 for commands for which no response
+ * is expected. It happened that there were only two such commands
+ * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+ * as well be a bug in that driver.
+ *
+ * Original driver set bit 14 for MMC/SD application
+ * commands. There's no difference 'on the wire' and
+ * it apparently works without it anyway.
+ */
+
+ switch (flags & MMC_CMD_MASK) {
+ case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break;
+ case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break;
+ case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break;
+ case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break;
+ }
+
+ if (flags & MMC_RSP_BUSY)
+ cb_flags |= CB710_MMC_RSP_BUSY;
+
+ cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+ if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+ cb_flags |= CB710_MMC_DATA_READ;
+
+ if (flags & MMC_RSP_PRESENT) {
+ /* Windows driver set 01 at bits 4,3 except for
+ * MMC_SET_BLOCKLEN where it set 10. Maybe the
+ * hardware can do something special about this
+ * command? The original driver looks buggy/incomplete
+ * anyway so we ignore this for now.
+ *
+ * I assume that 00 here means no response is expected.
+ */
+ cb_flags |= CB710_MMC_RSP_PRESENT;
+
+ if (flags & MMC_RSP_136)
+ cb_flags |= CB710_MMC_RSP_136;
+ if (!(flags & MMC_RSP_CRC))
+ cb_flags |= CB710_MMC_RSP_NO_CRC;
+ }
+
+ return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+ struct mmc_command *cmd)
+{
+ unsigned rsp_opcode, wanted_opcode;
+
+ /* Looks like final byte with CRC is always stripped (same as SDHCI) */
+ if (cmd->flags & MMC_RSP_136) {
+ u32 resp[4];
+
+ resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+ resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+ resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+ resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+ rsp_opcode = resp[0] >> 24;
+
+ cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+ cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+ cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+ cmd->resp[3] = (resp[3] << 8);
+ } else {
+ rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+ cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+ }
+
+ wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+ if (rsp_opcode != wanted_opcode)
+ cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+ struct mmc_data *data)
+{
+ int error, to;
+
+ if (data->flags & MMC_DATA_READ)
+ error = cb710_mmc_receive(slot, data);
+ else
+ error = cb710_mmc_send(slot, data);
+
+ to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+ if (!error)
+ error = to;
+
+ if (!error)
+ data->bytes_xfered = data->blksz * data->blocks;
+ return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ struct mmc_data *data = cmd->data;
+
+ u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+ dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+ if (data) {
+ if (!cb710_is_transfer_size_supported(data)) {
+ data->error = -EINVAL;
+ return -1;
+ }
+ cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+ }
+
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+ cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+ cb710_mmc_reset_events(slot);
+ cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+ cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+ if (cmd->error)
+ return -1;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ cb710_receive_response(slot, cmd);
+ if (cmd->error)
+ return -1;
+ }
+
+ if (data)
+ data->error = cb710_mmc_transfer_data(slot, data);
+ return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+ WARN_ON(reader->mrq != NULL);
+
+ reader->mrq = mrq;
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+ if (cb710_mmc_is_card_inserted(slot)) {
+ if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+ cb710_mmc_command(mmc, mrq->stop);
+ mdelay(1);
+ } else {
+ mrq->cmd->error = -ENOMEDIUM;
+ }
+
+ tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+ int err;
+
+ /* a lot of magic; see comment in cb710_mmc_set_clock() */
+ dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(1);
+ dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(1);
+ dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ mdelay(2);
+ dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+ if (unlikely(err))
+ return err;
+ /* This port behaves weird: quick byte reads of 0x08,0x09 return
+ * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+ * read/written from userspace... What am I missing here?
+ * (it doesn't depend on write-to-read delay) */
+ cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+ dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+ return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+ cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ int err;
+
+ cb710_mmc_set_clock(mmc, ios->clock);
+
+ if (!cb710_mmc_is_card_inserted(slot)) {
+ dev_dbg(cb710_slot_dev(slot),
+ "no card inserted - ignoring bus powerup request\n");
+ ios->power_mode = MMC_POWER_OFF;
+ }
+
+ if (ios->power_mode != reader->last_power_mode)
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ err = cb710_mmc_powerup(slot);
+ if (err) {
+ dev_warn(cb710_slot_dev(slot),
+ "powerup failed (%d)- retrying\n", err);
+ cb710_mmc_powerdown(slot);
+ udelay(1);
+ err = cb710_mmc_powerup(slot);
+ if (err)
+ dev_warn(cb710_slot_dev(slot),
+ "powerup retry failed (%d) - expect errors\n",
+ err);
+ }
+ reader->last_power_mode = MMC_POWER_ON;
+ break;
+ case MMC_POWER_OFF:
+ cb710_mmc_powerdown(slot);
+ reader->last_power_mode = MMC_POWER_OFF;
+ break;
+ case MMC_POWER_UP:
+ default:
+ /* ignore */;
+ }
+
+ cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+ return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+ & CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ u32 status, config1, config2, irqen;
+
+ status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+ irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+ config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+ config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+ dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+ "ie: %08X, c2: %08X, c1: %08X\n",
+ status, irqen, config2, config1);
+
+ if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+ /* ack the event */
+ cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+ CB710_MMC_S1_CARD_CHANGED);
+ if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+ == CB710_MMC_IE_CISTATUS_MASK)
+ mmc_detect_change(mmc, HZ/5);
+ } else {
+ dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+ spin_lock(&reader->irq_lock);
+ __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+ spin_unlock(&reader->irq_lock);
+ }
+
+ return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+ struct mmc_host *mmc = (void *)data;
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+ struct mmc_request *mrq = reader->mrq;
+
+ reader->mrq = NULL;
+ mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+ .request = cb710_mmc_request,
+ .set_ios = cb710_mmc_set_ios,
+ .get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ int err;
+
+ err = mmc_suspend_host(mmc, state);
+ if (err)
+ return err;
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+
+ return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct cb710_chip *chip = cb710_slot_to_chip(slot);
+ struct mmc_host *mmc;
+ struct cb710_mmc_reader *reader;
+ int err;
+ u32 val;
+
+ mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+ if (!mmc)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, mmc);
+
+ /* harmless (maybe) magic */
+ pci_read_config_dword(chip->pdev, 0x48, &val);
+ val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+ dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+ val *= 1000000;
+
+ mmc->ops = &cb710_mmc_host;
+ mmc->f_max = val;
+ mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+
+ reader = mmc_priv(mmc);
+
+ tasklet_init(&reader->finish_req_tasklet,
+ cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+ spin_lock_init(&reader->irq_lock);
+ cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+ err = mmc_add_host(mmc);
+ if (unlikely(err))
+ goto err_free_mmc;
+
+ dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+ mmc_hostname(mmc));
+
+ cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+ return 0;
+
+err_free_mmc:
+ dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+ mmc_free_host(mmc);
+ return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+ struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+ struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+ struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+ cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+ mmc_remove_host(mmc);
+
+ /* IRQs should be disabled now, but let's stay on the safe side */
+ cb710_mmc_enable_irq(slot, 0, ~0);
+ cb710_set_irq_handler(slot, NULL);
+
+ /* clear config ports - just in case */
+ cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+ cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+ tasklet_kill(&reader->finish_req_tasklet);
+
+ mmc_free_host(mmc);
+ return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+ .driver.name = "cb710-mmc",
+ .probe = cb710_mmc_init,
+ .remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+ .suspend = cb710_mmc_suspend,
+ .resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+ return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+ platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@...e.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff -urpN linux-2.6.29.3/drivers/mmc/host/cb710-mmc.h test2/drivers/mmc/host/cb710-mmc.h
--- linux-2.6.29.3/drivers/mmc/host/cb710-mmc.h 1970-01-01 01:00:00.000000000 +0100
+++ test2/drivers/mmc/host/cb710-mmc.h 2009-05-22 19:47:19.000000000 +0200
@@ -0,0 +1,104 @@
+/*
+ * cb710/cb710-mmc.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+ struct tasklet_struct finish_req_tasklet;
+ struct mmc_request *mrq;
+ spinlock_t irq_lock;
+ unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+ return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+ struct platform_device *pdev = container_of(mmc_dev(mmc),
+ struct platform_device, dev);
+ return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT 0x00
+
+#define CB710_MMC_CONFIG_PORT 0x04
+#define CB710_MMC_CONFIG0_PORT 0x04
+#define CB710_MMC_CONFIG1_PORT 0x05
+#define CB710_MMC_C1_4BIT_DATA_BUS 0x40
+#define CB710_MMC_CONFIG2_PORT 0x06
+#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */
+#define CB710_MMC_CONFIG3_PORT 0x07
+
+#define CB710_MMC_CONFIGB_PORT 0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT 0x0C
+#define CB710_MMC_IE_TEST_MASK 0x00BF
+#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000
+#define CB710_MMC_IE_IRQ_ENABLE 0x8000
+#define CB710_MMC_IE_CISTATUS_MASK \
+ (CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT 0x10
+#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF
+#define CB710_MMC_STATUS0_PORT 0x10
+#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40
+#define CB710_MMC_STATUS1_PORT 0x11
+#define CB710_MMC_S1_COMMAND_SENT 0x01
+#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02
+#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04
+#define CB710_MMC_S1_CARD_CHANGED 0x10
+#define CB710_MMC_S1_RESET 0x20
+#define CB710_MMC_STATUS2_PORT 0x12
+#define CB710_MMC_S2_FIFO_READY 0x01
+#define CB710_MMC_S2_FIFO_EMPTY 0x02
+#define CB710_MMC_S2_BUSY_10 0x10
+#define CB710_MMC_S2_BUSY_20 0x20
+#define CB710_MMC_STATUS3_PORT 0x13
+#define CB710_MMC_S3_CARD_DETECTED 0x02
+#define CB710_MMC_S3_WRITE_PROTECTED 0x04
+
+#define CB710_MMC_CMD_TYPE_PORT 0x14
+#define CB710_MMC_RSP_TYPE_MASK 0x0007
+#define CB710_MMC_RSP_R1 (0)
+#define CB710_MMC_RSP_136 (5)
+#define CB710_MMC_RSP_NO_CRC (2)
+#define CB710_MMC_RSP_PRESENT_MASK 0x0018
+#define CB710_MMC_RSP_NONE (0 << 3)
+#define CB710_MMC_RSP_PRESENT (1 << 3)
+#define CB710_MMC_RSP_PRESENT_X (2 << 3)
+#define CB710_MMC_CMD_TYPE_MASK 0x0060
+#define CB710_MMC_CMD_BC (0 << 5)
+#define CB710_MMC_CMD_BCR (1 << 5)
+#define CB710_MMC_CMD_AC (2 << 5)
+#define CB710_MMC_CMD_ADTC (3 << 5)
+#define CB710_MMC_DATA_READ 0x0080
+#define CB710_MMC_CMD_CODE_MASK 0x3F00
+#define CB710_MMC_CMD_CODE_SHIFT 8
+#define CB710_MMC_IS_APP_CMD 0x4000
+#define CB710_MMC_RSP_BUSY 0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT 0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C
+#define CB710_MMC_RESPONSE0_PORT 0x20
+#define CB710_MMC_RESPONSE1_PORT 0x24
+#define CB710_MMC_RESPONSE2_PORT 0x28
+#define CB710_MMC_RESPONSE3_PORT 0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff -urpN linux-2.6.29.3/drivers/mmc/host/Kconfig test2/drivers/mmc/host/Kconfig
--- linux-2.6.29.3/drivers/mmc/host/Kconfig 2009-05-22 19:20:40.000000000 +0200
+++ test2/drivers/mmc/host/Kconfig 2009-05-22 19:47:19.000000000 +0200
@@ -212,3 +212,16 @@ config MMC_TMIO
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also ipaq ASIC3
+
+config MMC_CB710
+ tristate "ENE CB710 MMC/SD Interface support"
+ depends on PCI
+ select CB710_CORE
+ help
+ This option enables support for MMC/SD part of ENE CB710/720 Flash
+ memory card reader found in some laptops (ie. some versions of
+ HP Compaq nx9500).
+
+ This driver can also be built as a module. If so, the module
+ will be called cb710-mmc.
+
diff -urpN linux-2.6.29.3/drivers/mmc/host/Makefile test2/drivers/mmc/host/Makefile
--- linux-2.6.29.3/drivers/mmc/host/Makefile 2009-03-24 00:12:14.000000000 +0100
+++ test2/drivers/mmc/host/Makefile 2009-05-22 19:47:19.000000000 +0200
@@ -27,4 +27,5 @@ endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
diff -urpN linux-2.6.29.3/include/linux/cb710.h test2/include/linux/cb710.h
--- linux-2.6.29.3/include/linux/cb710.h 1970-01-01 01:00:00.000000000 +0100
+++ test2/include/linux/cb710.h 2009-05-22 19:47:18.000000000 +0200
@@ -0,0 +1,238 @@
+/*
+ * cb710/cb710.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#ifdef CONFIG_CB710_DEBUG
+#define DEBUG
+#endif
+
+/* verify assumptions on platform_device framework */
+#define CONFIG_CB710_DEBUG_ASSUMPTIONS
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+ struct platform_device pdev;
+ void __iomem *iobase;
+ cb710_irq_handler_t irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+ struct pci_dev *pdev;
+ void __iomem *iobase;
+ unsigned platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+ atomic_t slot_refs_count;
+#endif
+ unsigned slot_mask;
+ unsigned slots;
+ spinlock_t irq_lock;
+ struct cb710_slot slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC 1
+#define CB710_SLOT_MS 2
+#define CB710_SLOT_SM 4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot, \
+ unsigned port, u##t value) \
+{ \
+ iowrite##t(value, slot->iobase + port); \
+} \
+ \
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \
+ unsigned port) \
+{ \
+ return ioread##t(slot->iobase + port); \
+} \
+ \
+static inline void cb710_modify_port_##t(struct cb710_slot *slot, \
+ unsigned port, u##t set, u##t clear) \
+{ \
+ iowrite##t( \
+ (ioread##t(slot->iobase + port) & ~clear)|set, \
+ slot->iobase + port); \
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+ int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+ cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+ struct platform_device *pdev)
+{
+ return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+ return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+ return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+ return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC 0x0F
+#define CB710_DUMP_REGS_MS 0x30
+#define CB710_DUMP_REGS_SM 0xC0
+#define CB710_DUMP_REGS_ALL 0xFF
+#define CB710_DUMP_REGS_MASK 0xFF
+
+#define CB710_DUMP_ACCESS_8 0x100
+#define CB710_DUMP_ACCESS_16 0x200
+#define CB710_DUMP_ACCESS_32 0x400
+#define CB710_DUMP_ACCESS_ALL 0x700
+#define CB710_DUMP_ACCESS_MASK 0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ * cb710/sgbuf2.h
+ *
+ * Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ * Stops mapping iterator @miter. @miter should have been started
+ * started using sg_miter_start(). A stopped iteration can be
+ * resumed by calling sg_miter_next() on it. This is useful when
+ * resources (kmap) need to be released during iteration.
+ *
+ * This is a convenience wrapper that will be optimized out for arches
+ * that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+ if (miter->page)
+ flush_kernel_dcache_page(miter->page);
+ sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ * sg_miter_start();
+ * sg_dwiter_write_from_io();
+ * sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ * sg_miter_start();
+ * sg_dwiter_read_to_io();
+ * sg_miter_stop();
+ */
+
+uint32_t sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ * Reads @count 32-bit words from register @port and stores it in
+ * buffer iterated by @miter. Data that would overflow the buffer
+ * is silently ignored. Iterator is advanced by 4*@...nt bytes
+ * or to the buffer's end whichever is closer.
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+ void __iomem *port, size_t count)
+{
+ while (count-- > 0)
+ sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ * Writes @count 32-bit words to register @port from buffer iterated
+ * through @miter. If buffer ends before @count words are written
+ * missing data is replaced by zeroes. @miter is advanced by 4*@...nt
+ * bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
+ */
+static inline void sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+ void __iomem *port, size_t count)
+{
+ while (count-- > 0)
+ iowrite32(sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff -urpN linux-2.6.29.3/include/linux/pci_ids.h test2/include/linux/pci_ids.h
--- linux-2.6.29.3/include/linux/pci_ids.h 2009-03-24 00:12:14.000000000 +0100
+++ test2/include/linux/pci_ids.h 2009-05-22 19:47:19.000000000 +0200
@@ -2077,6 +2077,7 @@
#define PCI_VENDOR_ID_MAINPINE 0x1522
#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100
#define PCI_VENDOR_ID_ENE 0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510
#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551
#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750
diff -urpN linux-2.6.29.3/MAINTAINERS test2/MAINTAINERS
--- linux-2.6.29.3/MAINTAINERS 2009-03-24 00:12:14.000000000 +0100
+++ test2/MAINTAINERS 2009-05-22 19:47:19.000000000 +0200
@@ -1660,6 +1660,15 @@ L: linux-scsi@...r.kernel.org
W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
+ENE CB710 FLASH CARD READER DRIVER
+P: Michał Mirosław
+M: mirq-linux@...e.qmqm.pl
+L: linux-kernel@...r.kernel.org
+S: Maintained
+F: drivers/misc/cb710/
+F: drivers/mmc/host/cb710-mmc.*
+F: include/linux/cb710.h
+
EPSON 1355 FRAMEBUFFER DRIVER
P: Christopher Hoover
M: ch@...gatroid.com, ch@....hp.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists