[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4A17CF66.7070408@gmail.com>
Date: Sat, 23 May 2009 12:26:46 +0200
From: Niel Lambrechts <niel.lambrechts@...il.com>
To: Tejun Heo <tj@...nel.org>
CC: "linux.kernel" <linux-kernel@...r.kernel.org>
Subject: Re: 2.6.29 regression: ATA bus errors on resume (output with debug
patch)
On 05/23/2009 11:17 AM, Niel Lambrechts wrote:
> On 04/09/2009 08:18 PM, Tejun Heo wrote:
>> Hmm... none of the debugging messages got triggered, so there should
>> be no noticeable timing change. It seems like you're being lucky for
>> the time being. Can you please keep testing and report back?
>
> Hi Tejun,
>
> Just to keep you up informed - this issue is still happening, I've
> been testing the latest 2.6.30-git kernels the last couple of weeks
> and just checked my logs after having an unexpected fsck upon system
> boot - the freeze seems to trigger very infrequently though, since I
> use s2disk at least twice a day and the error only seems to have
> happened twice since May 2.
>
> I had a look at your 2.6.29 debug patch, it does "Hunk #6 succeeded at
> 3368" so it should still be good (I hope), I'll try and run with it
> for a while.
Hi Tejun
Bug triggered with your patch! I played audio while suspending to try
and increase activity (I also removed a CD on boot), and the filesystem
came up dirty! This was on attempt nr. 3 or 4.
Here is the /var/log/messages output - i hope this is sufficient to
trace down the cause:
May 23 12:15:08 linux-7vph kernel: PM: Shrinking memory... done (98443
pages freed)
May 23 12:15:07 linux-7vph pulseaudio[3781]: alsa-util.c: period_time
: 185759
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: tstamp_mode
: ENABLE
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: period_step : 1
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: avail_min
: 15503
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: period_event : 0
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c:
start_threshold : -1
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c:
stop_threshold : 1073741824
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c:
silence_threshold: 0
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: silence_size : 0
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: boundary
: 1073741824
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: Slave:
Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: Its setup is:
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: stream
: PLAYBACK
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: access
: MMAP_INTERLEAVED
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: format
: S16_LE
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: subformat
: STD
May 23 12:15:08 linux-7vph kernel: PM: Freed 393772 kbytes in 3.23
seconds (121.91 MB/s)
May 23 12:15:09 linux-7vph kernel: Suspending console(s) (use
no_console_suspend to debug)
May 23 12:15:09 linux-7vph kernel: sd 0:0:0:0: [sda] Synchronizing SCSI
cache
May 23 12:15:09 linux-7vph kernel: ACPI handle has no context!
May 23 12:15:09 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
May 23 12:15:09 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
May 23 12:15:09 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
May 23 12:15:09 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 23 12:15:09 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
May 23 12:15:09 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
May 23 12:15:09 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
May 23 12:15:09 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B
disabled
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C disabled
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
May 23 12:15:08 linux-7vph pulseaudio[3781]: alsa-util.c: channels : 2
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: rate
: 44100
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: exact rate
: 44100 (44100/1)
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: msbits
: 16
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A disabled
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: buffer_size
: 16384
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: period_size
: 8192
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: period_time
: 185759
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: tstamp_mode
: ENABLE
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: period_step : 1
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: avail_min
: 15503
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: period_event : 0
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c:
start_threshold : -1
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: wake-up
capability enabled by ACPI
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c:
stop_threshold : 1073741824
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c:
silence_threshold: 0
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: silence_size : 0
May 23 12:15:10 linux-7vph kernel: ACPI: Preparing to enter system sleep
state S4
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-util.c: boundary
: 1073741824
May 23 12:15:10 linux-7vph kernel: PM: Saving platform NVS memory
May 23 12:15:10 linux-7vph kernel: Disabling non-boot CPUs ...
May 23 12:15:10 linux-7vph kernel: CPU 1 is now offline
May 23 12:15:10 linux-7vph kernel: SMP alternatives: switching to UP code
May 23 12:15:10 linux-7vph pulseaudio[3781]: alsa-sink.c: Increasing
wakeup watermark to 40.00 ms
May 23 12:15:10 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 23 12:15:10 linux-7vph kernel: CPU1 attaching NULL sched-domain.
May 23 12:15:10 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 23 12:15:10 linux-7vph kernel: CPU1 is down
May 23 12:15:10 linux-7vph kernel: Extended CMOS year: 2000
May 23 12:15:10 linux-7vph kernel: PM: Creating hibernation image:
May 23 12:15:10 linux-7vph kernel: PM: Need to copy 124750 pages
May 23 12:15:10 linux-7vph kernel: x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
May 23 12:15:10 linux-7vph kernel: Intel machine check architecture
supported.
May 23 12:15:10 linux-7vph kernel: Intel machine check reporting enabled
on CPU#0.
May 23 12:15:10 linux-7vph kernel: PM: Restoring platform NVS memory
May 23 12:15:10 linux-7vph kernel: Extended CMOS year: 2000
May 23 12:15:10 linux-7vph kernel: Enabling non-boot CPUs ...
May 23 12:15:10 linux-7vph kernel: SMP alternatives: switching to SMP code
May 23 12:15:10 linux-7vph kernel: Booting processor 1 APIC 0x1 ip 0x6000
May 23 12:15:10 linux-7vph kernel: Initializing CPU#1
May 23 12:15:10 linux-7vph kernel: Calibrating delay using timer
specific routine.. 5054.05 BogoMIPS (lpj=10108117)
May 23 12:15:10 linux-7vph kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 23 12:15:10 linux-7vph kernel: CPU: L2 cache: 6144K
May 23 12:15:10 linux-7vph kernel: CPU: Physical Processor ID: 0
May 23 12:15:10 linux-7vph kernel: CPU: Processor Core ID: 1
May 23 12:15:10 linux-7vph kernel: Intel machine check architecture
supported.
May 23 12:15:10 linux-7vph kernel: Intel machine check reporting enabled
on CPU#1.
May 23 12:15:10 linux-7vph kernel: x86 PAT enabled: cpu 1, old
0x7040600070406, new 0x7010600070106
May 23 12:15:10 linux-7vph kernel: CPU1: Intel(R) Core(TM)2 Duo CPU
T9400 @ 2.53GHz stepping 06
May 23 12:15:10 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 23 12:15:10 linux-7vph kernel: Switched to high resolution mode on CPU 1
May 23 12:15:10 linux-7vph kernel: CPU0 attaching sched-domain:
May 23 12:15:10 linux-7vph kernel: domain 0: span 0-1 level MC
May 23 12:15:10 linux-7vph kernel: groups: 0 1
May 23 12:15:10 linux-7vph kernel: domain 1: span 0-1 level CPU
May 23 12:15:10 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
May 23 12:15:10 linux-7vph kernel: CPU1 attaching sched-domain:
May 23 12:15:10 linux-7vph kernel: domain 0: span 0-1 level MC
May 23 12:15:10 linux-7vph kernel: groups: 1 0
May 23 12:15:10 linux-7vph kernel: domain 1: span 0-1 level CPU
May 23 12:15:10 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
May 23 12:15:10 linux-7vph kernel: microcode: failed to init CPU1
May 23 12:15:10 linux-7vph kernel: CPU1 is up
May 23 12:15:10 linux-7vph kernel: ACPI: Waking up from system sleep
state S4
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.0: restoring config
space at offset 0x1 (was 0x900007, writing 0x900403)
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.0: power state
changed by ACPI to D0
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.2: power state
changed by ACPI to D0
May 23 12:15:10 linux-7vph kernel: HDA Intel 0000:00:1b.0: restoring
config space at offset 0x1 (was 0x100106, writing 0x100102)
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.0: power state
changed by ACPI to D0
May 23 12:15:10 linux-7vph kernel: ahci 0000:00:1f.2: restoring config
space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
May 23 12:15:10 linux-7vph kernel: iwlagn 0000:03:00.0: restoring config
space at offset 0x1 (was 0x100106, writing 0x100506)
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.0: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.0: setting latency
timer to 64
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.1: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:00:03.0: PME# disabled
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A -> GSI
20 (level, low) -> IRQ 20
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0:
pci_enable_pcie_error_reporting failed 0xfffffffb
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: setting latency
timer to 64
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: wake-up
capability disabled by ACPI
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: wake-up
capability disabled by ACPI
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
May 23 12:15:10 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A ->
GSI 20 (level, low) -> IRQ 20
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.0: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B ->
GSI 21 (level, low) -> IRQ 21
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.1: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C ->
GSI 22 (level, low) -> IRQ 22
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1a.2: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D ->
GSI 23 (level, low) -> IRQ 23
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 23 12:15:10 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B ->
GSI 17 (level, low) -> IRQ 17
May 23 12:15:10 linux-7vph kernel: HDA Intel 0000:00:1b.0: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A ->
GSI 16 (level, low) -> IRQ 16
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.0: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B ->
GSI 17 (level, low) -> IRQ 17
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.1: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C ->
GSI 18 (level, low) -> IRQ 18
May 23 12:15:10 linux-7vph kernel: uhci_hcd 0000:00:1d.2: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D ->
GSI 19 (level, low) -> IRQ 19
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1d.7: setting
latency timer to 64
May 23 12:15:10 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:00:1e.0: setting latency
timer to 64
May 23 12:15:10 linux-7vph kernel: ahci 0000:00:1f.2: setting latency
timer to 64
May 23 12:15:10 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x16 frozen
May 23 12:15:10 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x16 frozen
May 23 12:15:10 linux-7vph kernel: pci 0000:15:00.0: PCI INT A -> GSI 16
(level, low) -> IRQ 16
May 23 12:15:10 linux-7vph kernel: ohci1394: fw-host0: OHCI-1394 1.1
(PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT
contexts=[4/4]
May 23 12:15:10 linux-7vph kernel: pci 0000:15:00.2: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:15:00.3: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:15:00.4: PME# disabled
May 23 12:15:10 linux-7vph kernel: pci 0000:15:00.5: PME# disabled
May 23 12:15:10 linux-7vph kernel: sd 0:0:0:0: [sda] Starting disk
May 23 12:15:10 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 23 12:15:10 linux-7vph kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/02:00:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 filtered out
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/5f:00:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/10:03:00:00:00:a0 filtered out
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/02:00:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 filtered out
May 23 12:15:10 linux-7vph kernel: ata2.00: ACPI cmd
e3/00:1f:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/5f:00:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: ACPI cmd
ef/10:03:00:00:00:a0 filtered out
May 23 12:15:10 linux-7vph kernel: ata2.00: ACPI cmd
e3/00:02:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata1.00: configured for UDMA/133
May 23 12:15:10 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0
SErr 0x0 action 0x9 t4
May 23 12:15:10 linux-7vph kernel: ata1: irq_stat 0x00400040, connection
status changed
May 23 12:15:10 linux-7vph kernel: ata1.00: configured for UDMA/133
May 23 12:15:10 linux-7vph kernel: ata1: EH complete
May 23 12:15:10 linux-7vph kernel: ata2.00: ACPI cmd
e3/00:1f:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata2.00: ACPI cmd
e3/00:02:00:00:00:a0 succeeded
May 23 12:15:10 linux-7vph kernel: ata2.00: configured for UDMA/133
May 23 12:15:10 linux-7vph kernel: ata2: exception Emask 0x10 SAct 0x0
SErr 0x0 action 0x9 t4
May 23 12:15:10 linux-7vph kernel: ata2: irq_stat 0x40000001
May 23 12:15:10 linux-7vph kernel: ata2.00: configured for UDMA/133
May 23 12:15:10 linux-7vph kernel: ata2: EH complete
May 23 12:15:10 linux-7vph kernel: Registered led device: iwl-phy0::radio
May 23 12:15:10 linux-7vph kernel: Registered led device: iwl-phy0::assoc
May 23 12:15:10 linux-7vph kernel: Registered led device: iwl-phy0::RX
May 23 12:15:10 linux-7vph kernel: Registered led device: iwl-phy0::TX
May 23 12:15:10 linux-7vph kernel: mac80211-phy0: failed to set key (0,
00:1d:92:1d:1e:8e) to hardware (-22)
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.0: restoring config
space at offset 0x1 (was 0x900407, writing 0x900403)
May 23 12:15:10 linux-7vph kernel: pci 0000:00:02.0: setting latency
timer to 64
May 23 12:15:10 linux-7vph kernel: Restarting tasks ... <3>ata1.00:
exception Emask 0x10 SAct 0x1f SErr 0x50000 action 0xe frozen
May 23 12:15:10 linux-7vph kernel: ata1.00: irq_stat 0x00400008, PHY RDY
changed
May 23 12:15:10 linux-7vph kernel: ata1: SError: { PHYRdyChg CommWake }
May 23 12:15:10 linux-7vph kernel: ata1.00: cmd
60/08:00:5f:89:67/01:00:0e:00:00/40 tag 0 ncq 135168 in
May 23 12:15:10 linux-7vph kernel: res
50/00:08:5f:08:c8/00:00:0c:00:00/40 Emask 0x10 (ATA bus error)
May 23 12:15:10 linux-7vph kernel: ata1.00: status: { DRDY }
May 23 12:15:10 linux-7vph kernel: ata1.00: cmd
60/08:08:6f:88:6f/01:00:0e:00:00/40 tag 1 ncq 135168 in
May 23 12:15:10 linux-7vph kernel: res
50/00:08:5f:08:c8/00:00:0c:00:00/40 Emask 0x10 (ATA bus error)
May 23 12:15:10 linux-7vph kernel: ata1.00: status: { DRDY }
May 23 12:15:10 linux-7vph kernel: ata1.00: cmd
60/08:10:5f:08:c8/00:00:0c:00:00/40 tag 2 ncq 4096 in
May 23 12:15:10 linux-7vph kernel: res
50/00:08:5f:08:c8/00:00:0c:00:00/40 Emask 0x10 (ATA bus error)
May 23 12:15:10 linux-7vph kernel: ata1.00: status: { DRDY }
May 23 12:15:10 linux-7vph kernel: ata1.00: cmd
60/08:18:9f:98:6d/00:00:0e:00:00/40 tag 3 ncq 4096 in
May 23 12:15:10 linux-7vph kernel: res
50/00:08:5f:08:c8/00:00:0c:00:00/40 Emask 0x10 (ATA bus error)
May 23 12:15:11 linux-7vph kernel: ata1.00: status: { DRDY }
May 23 12:15:11 linux-7vph kernel: ata1.00: cmd
60/e8:20:5f:8e:2b/00:00:0b:00:00/40 tag 4 ncq 118784 in
May 23 12:15:11 linux-7vph kernel: res
50/00:08:5f:08:c8/00:00:0c:00:00/40 Emask 0x10 (ATA bus error)
May 23 12:15:11 linux-7vph kernel: ata1.00: status: { DRDY }
May 23 12:15:11 linux-7vph kernel: ata1: hard resetting link
May 23 12:15:11 linux-7vph kernel: done.
May 23 12:15:11 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/02:00:00:00:00:a0 succeeded
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 filtered out
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/5f:00:00:00:00:a0 succeeded
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/10:03:00:00:00:a0 filtered out
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/02:00:00:00:00:a0 succeeded
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 filtered out
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/5f:00:00:00:00:a0 succeeded
May 23 12:15:11 linux-7vph kernel: ata1.00: ACPI cmd
ef/10:03:00:00:00:a0 filtered out
May 23 12:15:11 linux-7vph kernel: ata1.00: configured for UDMA/133
May 23 12:15:11 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0 t4
May 23 12:15:11 linux-7vph kernel: ata1.00: configured for UDMA/133
May 23 12:15:11 linux-7vph kernel: XXX scsi_eh_flush_done_q: online=1(2)
noretry=2 retries=0 allowed=5
May 23 12:15:11 linux-7vph kernel: scsi_eh_0: flush finish cmd: f6838ec0
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Sense Key : Aborted
Command [current] [descriptor]
May 23 12:15:11 linux-7vph kernel: Descriptor sense data with sense
descriptors (in hex):
May 23 12:15:11 linux-7vph kernel: 72 0b 00 00 00 00 00 0c 00 0a
80 00 00 00 00 00
May 23 12:15:11 linux-7vph kernel: 0c c8 08 5f
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Add. Sense: No
additional sense information
May 23 12:15:11 linux-7vph kernel: end_request: I/O error, dev sda,
sector 241666399
May 23 12:15:11 linux-7vph kernel: XXX scsi_eh_flush_done_q: online=1(2)
noretry=2 retries=0 allowed=5
May 23 12:15:11 linux-7vph kernel: scsi_eh_0: flush finish cmd: f6838680
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Sense Key : Aborted
Command <2>EXT4-fs error (device sda6): __ext4_get_inode_loc: unable to
read inode block - inode=2330983, block=9338933
May 23 12:15:11 linux-7vph kernel: [current] [descriptor]
May 23 12:15:11 linux-7vph kernel: Descriptor sense data with sense
descriptors (in hex):
May 23 12:15:11 linux-7vph kernel: 72 0b 00 00 00 00 00 0c 00 0a
80 00 00 00 00 00
May 23 12:15:11 linux-7vph kernel: 0c c8 08 5f
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Add. Sense: No
additional sense information
May 23 12:15:11 linux-7vph kernel: end_request: I/O error, dev sda,
sector 242190447
May 23 12:15:11 linux-7vph kernel: EXT4-fs error (device sda6):
__ext4_get_inode_loc: XXX scsi_eh_flush_done_q: online=1(2) noretry=0
retries=0 allowed=5
May 23 12:15:11 linux-7vph kernel: unable to read inode block -
inode=2346524, block=9404418
May 23 12:15:11 linux-7vph kernel: scsi_eh_0: flush retry cmd: f6838800
May 23 12:15:11 linux-7vph kernel: XXX scsi_eh_flush_done_q: online=1(2)
noretry=0 retries=0 allowed=5
May 23 12:15:11 linux-7vph kernel: scsi_eh_0: flush retry cmd: f403de00
May 23 12:15:11 linux-7vph kernel: XXX scsi_eh_flush_done_q: online=1(2)
noretry=2 retries=0 allowed=5
May 23 12:15:11 linux-7vph kernel: scsi_eh_0: flush finish cmd: f403d200
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Sense Key : Aborted
Command [current] [descriptor]
May 23 12:15:11 linux-7vph kernel: Descriptor sense data with sense
descriptors (in hex):
May 23 12:15:11 linux-7vph kernel: 72 0b 00 00 00 00 00 0c 00 0a
80 00 00 00 00 00
May 23 12:15:11 linux-7vph kernel: 0c c8 08 5f
May 23 12:15:11 linux-7vph kernel: sd 0:0:0:0: [sda] Add. Sense: No
additional sense information
May 23 12:15:11 linux-7vph kernel: end_request: I/O error, dev sda,
sector 187403871
May 23 12:15:11 linux-7vph kernel: ata1: EH complete
May 23 12:15:11 linux-7vph kernel: EXT4-fs error (device sda6):
__ext4_get_inode_loc: unable to read inode block - inode=641187,
block=2556122
May 23 12:15:11 linux-7vph kernel: EXT4-fs error (device sda6) in
ext4_reserve_inode_write: IO failure
May 23 12:15:11 linux-7vph kernel: EXT4-fs error (device sda6) in
ext4_reserve_inode_write: IO failure
May 23 12:15:11 linux-7vph kernel: EXT4-fs error (device sda6) in
ext4_reserve_inode_write: IO failure
May 23 12:16:50 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x10
May 23 12:16:50 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 23 12:16:50 linux-7vph kernel: CPU1 attaching NULL sched-domain.
May 23 12:16:50 linux-7vph kernel: CPU0 attaching sched-domain:
May 23 12:16:50 linux-7vph kernel: domain 0: span 0-1 level MC
May 23 12:16:50 linux-7vph kernel: groups: 0 1
May 23 12:16:50 linux-7vph kernel: domain 1: span 0-1 level CPU
May 23 12:16:50 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
May 23 12:16:50 linux-7vph kernel: CPU1 attaching sched-domain:
May 23 12:16:50 linux-7vph kernel: domain 0: span 0-1 level MC
May 23 12:16:50 linux-7vph kernel: groups: 1 0
May 23 12:16:50 linux-7vph kernel: domain 1: span 0-1 level CPU
May 23 12:16:50 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
Regards,
Niel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists