linux-kernel - JMicron SATA controller not available

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:	Tue, 26 May 2009 22:56:24 -0400
From:	Marc Dionne <marc.c.dionne@...il.com>
To:	linux-kernel@...r.kernel.org
Cc:	yu.zhao@...el.com
Subject: JMicron SATA controller not available - bisected

With current git the SATA DVD writer on my system is no longer detected, 
and these errors show up:

pci 0000:05:00.0: BAR 2: can't allocate resource
pci 0000:05:00.0: BAR 3: can't allocate resource
ahci 0000:05:00.0: device not available because of BAR 2 [0x00-0x07] 
collisions

.. where 05:00.0 is this SATA controller where the DVD is plugged in:

05:00.0 SATA controller: JMicron Technologies, Inc. 20360/20363 Serial 
ATA Controller (rev 03)

This is an ICH10-based board that has the JMicron controller in addition 
to the onboard SATA.  The drive works fine if plugged into one of the 
onboard ports, and also works fine with kernel 2.6.29 on the JMicron 
controller.

I bisected the problem down to this commit:
480b93b7837fb3cf0579a42f4953ac463a5b9e1e: PCI: centralize device setup code

Note that this worked with recent 2.6.30-rc kernels until I had to reset 
the board's CMOS, so a change in a BIOS setting was probably a trigger.

Marc

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/