linux-kernel - RE: Analyzed/Solved/Bisected: Booting 2.6.30-rc2-git7 very slow

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0F5B06BAB751E047AB5C87D1F77A7788694659AFB5@GVW0547EXC.americas.hpqcorp.net>
Date:	Thu, 28 May 2009 19:01:15 +0000
From:	"Miller, Mike (OS Dev)" <Mike.Miller@...com>
To:	Martin Knoblauch <knobi@...bisoft.de>,
	"Owens, James" <JOwens@...com>
CC:	Matthew Wilcox <matthew@....cx>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Mike Galbraith <efault@....de>,
	"viro@...IV.linux.org.uk" <viro@...IV.linux.org.uk>,
	"rjw@...k.pl" <rjw@...k.pl>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"tigran@...azian.fsnet.co.uk" <tigran@...azian.fsnet.co.uk>,
	Kay Sievers <kay.sievers@...y.org>,
	"shemminger@...tta.com" <shemminger@...tta.com>,
	Jesse Barnes <jbarnes@...tuousgeek.org>
Subject: RE: Analyzed/Solved/Bisected: Booting 2.6.30-rc2-git7 very slow

 

> -----Original Message-----
> From: Martin Knoblauch [mailto:knobi@...bisoft.de] 
> Sent: Thursday, May 28, 2009 4:00 AM
> To: Miller, Mike (OS Dev); Owens, James
> Cc: Matthew Wilcox; Andrew Morton; Mike Galbraith; 
> viro@...IV.linux.org.uk; rjw@...k.pl; 
> linux-kernel@...r.kernel.org; tigran@...azian.fsnet.co.uk; 
> Kay Sievers; shemminger@...tta.com; Jesse Barnes
> Subject: Re: Analyzed/Solved/Bisected: Booting 
> 2.6.30-rc2-git7 very slow
> 
> ----- Original Message ----
> 
> > From: "Miller, Mike (OS Dev)" <Mike.Miller@...com>
> > To: "Owens, James" <JOwens@...com>; Martin Knoblauch 
> > <knobi@...bisoft.de>
> > Cc: Matthew Wilcox <matthew@....cx>; Andrew Morton 
> > <akpm@...ux-foundation.org>; Mike Galbraith <efault@....de>; 
> > "viro@...IV.linux.org.uk" <viro@...IV.linux.org.uk>; "rjw@...k.pl" 
> > <rjw@...k.pl>; "linux-kernel@...r.kernel.org" 
> > <linux-kernel@...r.kernel.org>; "tigran@...azian.fsnet.co.uk" 
> > <tigran@...azian.fsnet.co.uk>; Kay Sievers <kay.sievers@...y.org>; 
> > "shemminger@...tta.com" <shemminger@...tta.com>; Jesse Barnes 
> > <jbarnes@...tuousgeek.org>
> > Sent: Wednesday, May 27, 2009 8:18:46 PM
> > Subject: RE: Analyzed/Solved/Bisected: Booting 2.6.30-rc2-git7 very 
> > slow
> > 
> > > > 
> > > >  Finally, today I built the ccsii driver into the kernel. 
> > > It was previously modularized and loaded from initrd. The second 
> > > "sysfs" line went away. But does this make cciss guilty? 
> It is now 
> > > loaded about 2 seconds earlier in the boot sequence, 
> which is a big 
> > > change in timing I guess.
> > > > 
> > > >  Enlighten me :-)
> > > 
> > > No idea what is going on, but since I saw your May 20 message, I 
> > > have been trying to wake up someone whose day job it should be to 
> > > care about dl380s and smartarrays. :)
> > 
> > What? I know Martin has pinged me in the past, but I do not 
> think it 
> > was about this issue. If there's multiple sysfs entries for cciss I 
> > can't explain that offhand. We do little to nothing for 
> sysfs in the driver.
> > Had something similiar happen recently where "/" changed to 
> "!". Had 
> > do to with our nested directory structure, /dev/cciss/name vs 
> > /dev/name. But we did not make that change, either.
> > 
> Hi Mike, Jim
> 
>  you are right. I never talked to you about this issue. 
> Actually, I did not suspect CCISS or the DL380 in general to 
> be involved before last week when I retested on the x3650 and 
> the problem went away. Due to day-job and priorities I did 
> not follow up.

Martin,
Same exact OS install? Are you sure all the userspace stuff is the same?

-- mikem
> > 
> > > 
> > > If they don't react soon, I'll make this my own day job to try to 
> > > reproduce it.  We will need hardware config details and firmware 
> > > revs to start.
> > > 
> 
> Dl380/G4
> 2x3.4 GHz CPUs
> 8 GB Memeory
> 4x72 GB as RAID5 on SA6i controller
> 
> BIOS: P51 (07(19/2007)
> ILO FW: 1.91
> SA6i FW: 2.84
> 
> lspci output (-vvv and -xxx) appendend to prevent line wrapping.
> 
> 
> Cheers
> Martin
> --
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/