linux-kernel - [PATCH 2/2] usb_serial: only allow sysrq on a console port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1243622057-17671-3-git-send-email-jason.wessel@windriver.com>
Date:	Fri, 29 May 2009 13:34:17 -0500
From:	Jason Wessel <jason.wessel@...driver.com>
To:	greg@...ah.com
Cc:	linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
	Jason Wessel <jason.wessel@...driver.com>
Subject: [PATCH 2/2] usb_serial: only allow sysrq on a console port

The only time a sysrq should get processed is if the attached device
is a console.  This is intended to protect sysrq execution on a host
connected with a terminal program.

Here is the problem scenario:

host A <-- rs232 link --> host B

Host A is using mincom and a usb pl2303 device to connect to host b
which is a linux system with a usb pl2303 device acting as the serial
console.  When host B is rebooted the pl2303 emits random junk
characters on reset.  These character sequences contain serial break
signals most of the time and when translated to a sysrq have caused
host A to get random processes killed, reboots or power down.

It is true that in this setup with this patch host B might still have
the same problem as host A if you reboot host A.  In most cases host A
is a development host which seldom gets rebooted, and you could turn
off sysrq temporarily on host B if you need to reboot host A.

Signed-off-by: Jason Wessel <jason.wessel@...driver.com>
---
 drivers/usb/serial/generic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index df56ed3..4797402 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -529,7 +529,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)

 int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
 {
-	if (port->sysrq) {
+	if (port->sysrq && port->console) {
 		if (ch && time_before(jiffies, port->sysrq)) {
 			handle_sysrq(ch, tty_port_tty_get(&port->port));
 			port->sysrq = 0;
-- 
1.6.3.1.9.g95405b

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/