linux-kernel - Re: [loongson-PATCH-v1 16/27] Add Siliconmotion 712 framebuffer driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1243626710.18071.78.camel@falcon>
Date:	Sat, 30 May 2009 03:51:50 +0800
From:	Wu Zhangjin <wuzhangjin@...il.com>
To:	Simon Braunschmidt <sb@...ix.com>, boyod.yang@...iconmotion.com.cn,
	gewang@...iconmotion.com
Cc:	linux-mips@...ux-mips.org, linux-kernel@...r.kernel.org
Subject: Re: [loongson-PATCH-v1 16/27] Add Siliconmotion 712 framebuffer
 driver

Hi, 

On Fri, 2009-05-29 at 15:29 +0200, Simon Braunschmidt wrote:
> Hi Wu Zhangjin
> 
> I applied your patch cleanly and run it on a i486SX (little endian) 
> embedded computing board.

thanks very much for testing it in a non-mips platform!

> This provides a huge performance benefit compared to vesa framebuffer, 
> so thanks a lot for the contribution.
> 

the thanks should goes to the original authors from Silicon Motion
Technology Corp. including Ge Wang and Boyod.Yang. I just cleaned it up.

> I tested it in both the library-accelerated (cfb...) and hardware 
> accelerated codepaths, with no problems. Tested with qt-embedded 4.5.1.
> 
> As i have seen lots of functionality are guarded by
> #ifdef __BIG_ENDIAN
> 
> Is there a way to setup a different mode than 1024x600 on 
> kernel-commandline or from userspace, e.g. with fbset?
> 

seems we can change it in userspace, i have changed it to 800X480 in a
7inch yeeloong2f laptop in the "control center" of KDE desktop.

or perhaps you can configure it in the Xorg.conf directly.

> What I currently do is
> picking appropriate values form the table VGAMode in smtcfb.h and 
> hardcoding them.
> 
> I tried 800x600x16bit@...z, which worked also, but 1024x768x24bit@...z 
> left me with a corrupted display output (distored colors, missing 
> regions), i did not check further wheter it also crashed.
> 

I will try to check it, but in reality, I'm not familiar with it, so
maybe very hard and slow to check it. I will forward this E-mail to the
original authors, hope they can give some help.

> I dont know wheter i am subscribed and this will make it through to lkml 
> and linux-mips, feel free to cite me if you want.
> 
> Also if you want you may add my
> 
> Tested-by: Simon Braunschmidt <sbraun@...ix.com>
> 

added.

> 
> see also attached a patch for the debug messages
> 
> 

Applied.

thanks!
Wu Zhangjin
> 
>  From addec9a5a27512621c538a2f799e31e07720cb9c Mon Sep 17 00:00:00 2001
> From: Simon Braunschmidt <sbraun@...ix.com>
> Date: Fri, 29 May 2009 15:03:51 +0200
> Subject: [PATCH] [video] fix debug messages in smtcfb
> 
> when defining #DEBUG
> ---
>   drivers/video/smi/smtcfb.c |    6 ++++--
>   1 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/smi/smtcfb.c b/drivers/video/smi/smtcfb.c
> index 33ce878..ebc6371 100644
> --- a/drivers/video/smi/smtcfb.c
> +++ b/drivers/video/smi/smtcfb.c
> @@ -44,6 +44,8 @@
>   #include "smtcfb.h"
>   #include "smtc2d.h"
> 
> +#define DEBUG
> +
>   #ifdef DEBUG
>   #define smdbg(format, arg...)  printk(KERN_DEBUG format , ## arg)
>   #else
> @@ -1087,7 +1089,7 @@ static int __init sm712be_setup(char *options)
>          sm712be_flag = 0;
>          if (!options || !*options) {
>                  retval = 1;
> -               smdbg("\n No sm712be parameter\n", __LINE__);
> +               smdbg("\n No sm712be parameter\n");
>          }
>          if (!retval && strstr(options, "enable"))
>                  sm712be_flag = 1;
> @@ -1113,7 +1115,7 @@ static int __init sm712vga_setup(char *options)
> 
>          if (!options || !*options) {
>                  retval = 1;
> -               smdbg("\n No vga parameter\n", __LINE__);
> +               smdbg("\n No vga parameter\n");
>          }
> 
>          screen_info.lfb_width = 0;
> --
> 1.6.3.rc0.1.gf800
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/