linux-kernel - Re: [PATCH 3/4] ide-gd: implement block device ->set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200906012332.31628.bzolnier@gmail.com>
Date:	Mon, 1 Jun 2009 23:32:20 +0200
From:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To:	linux-ide@...r.kernel.org
Cc:	"Andries E. Brouwer" <Andries.Brouwer@....nl>,
	linux-kernel@...r.kernel.org,
	Robert Hancock <hancockrwd@...il.com>,
	Al Viro <viro@...iv.linux.org.uk>,
	Frans Pop <elendil@...net.nl>
Subject: Re: [PATCH 3/4] ide-gd: implement block device ->set_capacity method

On Sunday 31 May 2009 16:39:31 Bartlomiej Zolnierkiewicz wrote:
> From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
> Subject: [PATCH] ide-gd: implement block device ->set_capacity method
> 
> * Use ->probed_capacity to store native device capacity for ATA disks.
> 
> * Add ->set_capacity method to struct ide_disk_ops.
> 
> * Implement disk device ->set_capacity method for ATA disks.
> 
> * Implement block device ->set_capacity method.
> 
> Together with the previous patch adding ->set_capacity block device
> method this allows automatic disabling of Host Protected Area (HPA)
> if any partitions overlapping HPA are detected.
> 
> Cc: Robert Hancock <hancockrwd@...il.com>
> Cc: Frans Pop <elendil@...net.nl>
> Cc: "Andries E. Brouwer" <Andries.Brouwer@....nl>
> Cc: Al Viro <viro@...iv.linux.org.uk>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>

v2 interdiff

v2:
* Check if LBA and HPA are supported in ide_disk_set_capacity().

* According to the spec the SET MAX ADDRESS command shall be
  immediately preceded by a READ NATIVE MAX ADDRESS command.

* Add ide_disk_hpa_{get_native,set}_capacity() helpers.
---
 ide-disk.c |   58 +++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 43 insertions(+), 15 deletions(-)

diff -u b/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
--- b/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -302,14 +302,12 @@
 	{ NULL,		NULL }
 };
 
-static void idedisk_check_hpa(ide_drive_t *drive)
+static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
 {
-	unsigned long long capacity, set_max;
-	int lba48 = ata_id_lba48_enabled(drive->id);
+	u64 capacity, set_max;
 
 	capacity = drive->capacity64;
-
-	set_max = idedisk_read_native_max_address(drive, lba48);
+	set_max  = idedisk_read_native_max_address(drive, lba48);
 
 	if (ide_in_drive_list(drive->id, hpa_list)) {
 		/*
@@ -320,6 +318,26 @@
 			set_max--;
 	}
 
+	return set_max;
+}
+
+static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
+{
+	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if (set_max)
+		drive->capacity64 = set_max;
+
+	return set_max;
+}
+
+static void idedisk_check_hpa(ide_drive_t *drive)
+{
+	u64 capacity, set_max;
+	int lba48 = ata_id_lba48_enabled(drive->id);
+
+	capacity = drive->capacity64;
+	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
+
 	if (set_max <= capacity)
 		return;
 
@@ -332,13 +350,10 @@
 			 capacity, sectors_to_MB(capacity),
 			 set_max, sectors_to_MB(set_max));
 
-	set_max = idedisk_set_max_address(drive, set_max, lba48);
-
-	if (set_max) {
-		drive->capacity64 = set_max;
+	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
+	if (set_max)
 		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
 				 drive->name);
-	}
 }
 
 static int ide_disk_get_capacity(ide_drive_t *drive)
@@ -399,12 +414,25 @@
 static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
 {
 	u64 set = min(capacity, drive->probed_capacity);
-	int lba48 = ata_id_lba48_enabled(drive->id);
-
-	capacity = idedisk_set_max_address(drive, set, lba48);
-	if (capacity)
-		drive->capacity64 = capacity;
+	u16 *id = drive->id;
+	int lba48 = ata_id_lba48_enabled(id);
 
+	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
+	    ata_id_hpa_enabled(id) == 0)
+		goto out;
+
+	/*
+	 * according to the spec the SET MAX ADDRESS command shall be
+	 * immediately preceded by a READ NATIVE MAX ADDRESS command
+	 */
+	capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
+	if (capacity == 0)
+		goto out;
+
+	set = ide_disk_hpa_set_capacity(drive, set, lba48);
+	if (set)
+		return set;
+out:
 	return drive->capacity64;
 }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/