| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090604143221.GG29005@elf.ucw.cz>
Date: Thu, 4 Jun 2009 16:32:22 +0200
From: Pavel Machek <pavel@....cz>
To: Jiri Kosina <jkosina@...e.cz>
Cc: kernel list <linux-kernel@...r.kernel.org>,
Trivial patch monkey <trivial@...nel.org>
Subject: Kconfig: .ko is normally not included in kconfig help
.ko is normally not included in Kconfig help, make it consistent.
Signed-off-by: Pavel Machek <pavel@....cz>
---
commit 7ca0c98aa0bc0d6d3c27ab40e1ca4021a72b960d
tree 2fc714be60b4def0ea0b8c4e4d07e0f9e5beb66d
parent e667f8f9189e8bd191ba9a0656d8b3fd47c41e8a
author Pavel <pavel@....cz> Thu, 04 Jun 2009 16:31:50 +0200
committer Pavel <pavel@....cz> Thu, 04 Jun 2009 16:31:50 +0200
drivers/crypto/Kconfig | 6 +++---
drivers/net/wireless/hostap/Kconfig | 8 ++++----
drivers/net/wireless/rt2x00/Kconfig | 14 +++++++-------
drivers/s390/net/Kconfig | 14 +++++++-------
net/netfilter/Kconfig | 4 ++--
5 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 01afd75..3e72a6a 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
Available in VIA C3 and newer CPUs.
If unsure say M. The compiled module will be
- called padlock-aes.ko
+ called padlock-aes.
config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
Available in VIA C7 and newer processors.
If unsure say M. The compiled module will be
- called padlock-sha.ko
+ called padlock-sha.
config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
depends on ZCRYPT="m"
help
- Select this option if you want to have a single module z90crypt.ko
+ Select this option if you want to have a single module z90crypt,
that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers).
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207..c15db22 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
PLX/PCI/CS version of the driver to actually use the driver.
The driver can be compiled as a module and it will be called
- "hostap.ko".
+ hostap.
config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
driver.
The driver can be compiled as a module and will be named
- "hostap_plx.ko".
+ hostap_plx.
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
driver.
The driver can be compiled as a module and will be named
- "hostap_pci.ko".
+ hostap_pci.
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
driver.
The driver can be compiled as a module and will be named
- "hostap_cs.ko".
+ hostap_cs.
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9c..1ae11c7 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
- a module) will be called "rt2x00lib.ko".
+ a module) will be called rt2x00lib.
Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be
- called "rt2x00pci.ko" and "rt2x00usb.ko".
+ called rt2x00pci and rt2x00usb.
if RT2X00
@@ -26,7 +26,7 @@ config RT2400PCI
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
- When compiled as a module, this driver will be called "rt2400pci.ko".
+ When compiled as a module, this driver will be called rt2400pci.
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
- When compiled as a module, this driver will be called "rt2500pci.ko".
+ When compiled as a module, this driver will be called rt2500pci.
config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
- When compiled as a module, this driver will be called "rt61pci.ko".
+ When compiled as a module, this driver will be called rt61pci.
config RT2500USB
tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
- When compiled as a module, this driver will be called "rt2500usb.ko".
+ When compiled as a module, this driver will be called rt2500usb.
config RT73USB
tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,7 @@ config RT73USB
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
- When compiled as a module, this driver will be called "rt73usb.ko".
+ When compiled as a module, this driver will be called rt73usb.
config RT2X00_LIB_PCI
tristate
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c8..cb909a5 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
Select this option if you want to use LCS networking on IBM System z.
This device driver supports Token Ring (IEEE 802.5),
FDDI (IEEE 802.7) and Ethernet.
- To compile as a module, choose M. The module name is lcs.ko.
+ To compile as a module, choose M. The module name is lcs.
If you do not know what it is, it's safe to choose Y.
config CTCM
@@ -21,7 +21,7 @@ config CTCM
It also supports virtual CTCs when running under VM.
This driver also supports channel-to-channel MPC SNA devices.
MPC is an SNA protocol device used by Communication Server for Linux.
- To compile as a module, choose M. The module name is ctcm.ko.
+ To compile as a module, choose M. The module name is ctcm.
To compile into the kernel, choose Y.
If you do not need any channel-to-channel connection, choose N.
@@ -34,7 +34,7 @@ config NETIUCV
link between VM guests. Using ifconfig a point-to-point connection
can be established to the Linux on IBM System z
running on the other VM guest. To compile as a module, choose M.
- The module name is netiucv.ko. If unsure, choose Y.
+ The module name is netiucv. If unsure, choose Y.
config SMSGIUCV
tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
- To compile as a module, choose M. The module name is claw.ko.
+ To compile as a module, choose M. The module name is claw.
To compile into the kernel, choose Y.
config QETH
@@ -65,14 +65,14 @@ config QETH
<http://www.ibm.com/developerworks/linux/linux390>
To compile this driver as a module, choose M.
- The module name is qeth.ko.
+ The module name is qeth.
config QETH_L2
tristate "qeth layer 2 device support"
depends on QETH
help
Select this option to be able to run qeth devices in layer 2 mode.
- To compile as a module, choose M. The module name is qeth_l2.ko.
+ To compile as a module, choose M. The module name is qeth_l2.
If unsure, choose y.
config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
depends on QETH
help
Select this option to be able to run qeth devices in layer 3 mode.
- To compile as a module choose M. The module name is qeth_l3.ko.
+ To compile as a module choose M. The module name is qeth_l3.
If unsure, choose Y.
config QETH_IPV6
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad74..c26a20c 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called
- ipt_CONNMARK.ko. If unsure, say `N'.
+ ipt_CONNMARK. If unsure, say `N'.
config NETFILTER_XT_TARGET_CONNSECMARK
tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called
- ipt_connmark.ko. If unsure, say `N'.
+ ipt_connmark. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support'
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists