Linux version 2.6.30-rc4 (test2.cn.oracle.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #3 SMP Fri Jun 5 14:14:28 CST 2009 Command line: ro root=LABEL=/var rhgb quiet crashkernel=128M@16M KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf5ffc00 (usable) BIOS-e820: 00000000bf5ffc00 - 00000000bf601c00 (ACPI NVS) BIOS-e820: 00000000bf603c00 - 00000000bf653c00 (reserved) BIOS-e820: 00000000bf653c00 - 00000000bf655c00 (ACPI data) BIOS-e820: 00000000bf655c00 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI 2.3 present. last_pfn = 0x13c000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask 000000000 write-back 1 base 0BF800000 mask FFF800000 uncachable 2 base 0BF700000 mask FFFF00000 uncachable 3 base 0C0000000 mask FC0000000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf5ff max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000bf5ff000 0000000000 - 00bf400000 page 2M 00bf400000 - 00bf5ff000 page 4k kernel direct mapping tables up to bf5ff000 @ 8000-d000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ b000-11000 RAMDISK: 37d94000 - 37fef752 ACPI: RSDP 00000000000febf0 00024 (v02 DELL ) ACPI: XSDT 00000000000fce99 0006C (v01 DELL B8K 00000014 ASL 00000061) ACPI: FACP 00000000000fcfc1 000F4 (v03 DELL B8K 00000014 ASL 00000061) ACPI: DSDT 00000000fff6a119 0473C (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 00000000bf5ffc00 00040 ACPI: SSDT 00000000fff6e974 000AA (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fd0b5 00092 (v01 DELL B8K 00000014 ASL 00000061) ACPI: BOOT 00000000000fd147 00028 (v01 DELL B8K 00000014 ASL 00000061) ACPI: ASF! 00000000000fd16f 00092 (v32 DELL B8K 00000014 ASL 00000061) ACPI: MCFG 00000000000fd201 0003E (v01 DELL B8K 00000014 ASL 00000061) ACPI: HPET 00000000000fd23f 00038 (v01 DELL B8K 00000014 ASL 00000061) ACPI: TCPA 00000000000fd49b 00032 (v01 DELL B8K 00000014 ASL 00000061) ACPI: SLIC 00000000000fd277 00176 (v01 DELL B8K 00000014 ASL 00000061) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000013c000000 Bootmem setup node 0 0000000000000000-000000013c000000 NODE_DATA [000000000000c000 - 0000000000011fff] bootmap [0000000000012000 - 00000000000397ff] pages 28 (8 early reservations) ==> bootmem [0000000000 - 013c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000d065d0] TEXT DATA BSS ==> [0000200000 - 0000d065d0] #3 [0037d94000 - 0037fef752] RAMDISK ==> [0037d94000 - 0037fef752] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000d07000 - 0000d07234] BRK ==> [0000d07000 - 0000d07234] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000fe710] fe710 Reserving 128MB of memory at 16MB for crashkernel (System RAM: 5056MB) [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bf5ff 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1029534 DMA zone: 56 pages used for memmap DMA zone: 2925 pages reserved DMA zone: 1018 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765495 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 6 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff880028104000, static data 69536 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008913 Policy zone: Normal Kernel command line: ro root=LABEL=/var rhgb quiet crashkernel=128M@16M Initializing CPU#0 NR_IRQS:4352 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2128.021 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3848804k/5177344k available (2801k kernel code, 1059208k absent, 269332k reserved, 1965k data, 396k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.04 BogoMIPS (lpj=2128021) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4255.80 BogoMIPS (lpj=2127902) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8511.84 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1736 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning (tbutils-0246): Incorrect checksum in table [TCPA] - 00, should be 89 [20090320] ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe00000-0xdfefffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 20 io port: [0xecb8-0xecbf] pci 0000:00:02.1: reg 10 32bit mmio: [0xdff00000-0xdfffffff] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdfdfbc00-0xdfdfbfff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdfc000-0xdfdfffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf] pci 0000:00:1f.2: reg 24 io port: [0xecc0-0xeccf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xdfdfbb00-0xdfdfbbff] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47] pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53] pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67] pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73] pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf] pci 0000:00:1f.5: reg 24 io port: [0xecd0-0xecdf] pci 0000:00:1f.5: PME# supported from D3hot pci 0000:00:1f.5: PME# disabled pci 0000:00:01.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xdfaf0000-0xdfafffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.4: bridge 32bit mmio: [0xdfa00000-0xdfafffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xdf880000-0xdf89ffff] pci 0000:04:00.0: reg 14 32bit mmio: [0xdf8a0000-0xdf8bffff] pci 0000:04:00.0: reg 18 io port: [0xdc80-0xdcbf] pci 0000:04:00.0: reg 30 32bit mmio: [0xdf900000-0xdf91ffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:02.0: reg 10 32bit mmio: [0xdf8c0000-0xdf8dffff] pci 0000:04:02.0: reg 14 32bit mmio: [0xdf8e0000-0xdf8fffff] pci 0000:04:02.0: reg 18 io port: [0xdcc0-0xdcff] pci 0000:04:02.0: reg 30 32bit mmio: [0xdf900000-0xdf91ffff] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold pci 0000:04:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xdf800000-0xdf9fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:08: iomem range 0x0-0x9ffff could not be reserved system 00:08: iomem range 0x100000-0xffffff could not be reserved system 00:08: iomem range 0x1000000-0xbf5ffbff could not be reserved system 00:08: iomem range 0xf0000-0xfffff could not be reserved system 00:08: iomem range 0xc0000-0xcffff has been reserved system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved system 00:08: iomem range 0xffc00000-0xffffffff has been reserved system 00:09: ioport range 0x100-0x1fe has been reserved system 00:09: ioport range 0x200-0x277 has been reserved system 00:09: ioport range 0x280-0x2e7 has been reserved system 00:09: ioport range 0x2f0-0x2f7 has been reserved system 00:09: ioport range 0x300-0x377 has been reserved system 00:09: ioport range 0x380-0x3bb has been reserved system 00:09: ioport range 0x3c0-0x3e7 could not be reserved system 00:09: ioport range 0x3f6-0x3f7 has been reserved system 00:09: ioport range 0x400-0x4cf has been reserved system 00:09: ioport range 0x4d2-0x57f has been reserved system 00:09: ioport range 0x580-0x677 has been reserved system 00:09: ioport range 0x680-0x777 has been reserved system 00:09: ioport range 0x780-0x7bb has been reserved system 00:09: ioport range 0x7c0-0x7ff has been reserved system 00:09: ioport range 0x8e0-0x8ff has been reserved system 00:09: ioport range 0x900-0x9fe has been reserved system 00:09: ioport range 0xa00-0xafe has been reserved system 00:09: ioport range 0xb00-0xbfe has been reserved system 00:09: ioport range 0xc80-0xcaf has been reserved system 00:09: ioport range 0xcc0-0xcf7 has been reserved system 00:09: ioport range 0xd00-0xdfe has been reserved system 00:09: ioport range 0xe00-0xefe has been reserved system 00:09: ioport range 0xf00-0xffe has been reserved system 00:09: ioport range 0x2000-0x20fe has been reserved system 00:09: ioport range 0x2100-0x21fe has been reserved system 00:09: ioport range 0x2200-0x22fe has been reserved system 00:09: ioport range 0x2300-0x23fe has been reserved system 00:09: ioport range 0x2400-0x24fe has been reserved system 00:09: ioport range 0x2500-0x25fe has been reserved system 00:09: ioport range 0x2600-0x26fe has been reserved system 00:09: ioport range 0x2700-0x27fe has been reserved system 00:09: ioport range 0x2800-0x28fe has been reserved system 00:09: ioport range 0x2900-0x29fe has been reserved system 00:09: ioport range 0x2a00-0x2afe has been reserved system 00:09: ioport range 0x2b00-0x2bfe has been reserved system 00:09: ioport range 0x2c00-0x2cfe has been reserved system 00:09: ioport range 0x2d00-0x2dfe has been reserved system 00:09: ioport range 0x2e00-0x2efe has been reserved system 00:09: ioport range 0x2f00-0x2ffe has been reserved system 00:09: ioport range 0x5000-0x50fe has been reserved system 00:09: ioport range 0x5100-0x51fe has been reserved system 00:09: ioport range 0x5200-0x52fe has been reserved system 00:09: ioport range 0x5300-0x53fe has been reserved system 00:09: ioport range 0x5400-0x54fe has been reserved system 00:09: ioport range 0x5500-0x55fe has been reserved system 00:09: ioport range 0x5600-0x56fe has been reserved system 00:09: ioport range 0x5700-0x57fe has been reserved system 00:09: ioport range 0x5800-0x58fe has been reserved system 00:09: ioport range 0x5900-0x59fe has been reserved system 00:09: ioport range 0x5a00-0x5afe has been reserved system 00:09: ioport range 0x5b00-0x5bfe has been reserved system 00:09: ioport range 0x5c00-0x5cfe has been reserved system 00:09: ioport range 0x5d00-0x5dfe has been reserved system 00:09: ioport range 0x5e00-0x5efe has been reserved system 00:09: ioport range 0x5f00-0x5ffe has been reserved system 00:09: ioport range 0x6000-0x60fe has been reserved system 00:09: ioport range 0x6100-0x61fe has been reserved system 00:09: ioport range 0x6200-0x62fe has been reserved system 00:09: ioport range 0x6300-0x63fe has been reserved system 00:09: ioport range 0x6400-0x64fe has been reserved system 00:09: ioport range 0x6500-0x65fe has been reserved system 00:09: ioport range 0x6600-0x66fe has been reserved system 00:09: ioport range 0x6700-0x67fe has been reserved system 00:09: ioport range 0x6800-0x68fe has been reserved system 00:09: ioport range 0x6900-0x69fe has been reserved system 00:09: ioport range 0x6a00-0x6afe has been reserved system 00:09: ioport range 0x6b00-0x6bfe has been reserved system 00:09: ioport range 0x6c00-0x6cfe has been reserved system 00:09: ioport range 0x6d00-0x6dfe has been reserved system 00:09: ioport range 0x6e00-0x6efe has been reserved system 00:09: ioport range 0x6f00-0x6ffe has been reserved system 00:09: ioport range 0xa000-0xa0fe has been reserved system 00:09: ioport range 0xa100-0xa1fe has been reserved system 00:09: ioport range 0xa200-0xa2fe has been reserved system 00:09: ioport range 0xa300-0xa3fe has been reserved system 00:09: ioport range 0xa400-0xa4fe has been reserved system 00:09: ioport range 0xa500-0xa5fe has been reserved system 00:09: ioport range 0xa600-0xa6fe has been reserved system 00:09: ioport range 0xa700-0xa7fe has been reserved system 00:09: ioport range 0xa800-0xa8fe has been reserved system 00:09: ioport range 0xa900-0xa9fe has been reserved system 00:09: ioport range 0xaa00-0xaafe has been reserved system 00:09: ioport range 0xab00-0xabfe has been reserved system 00:09: ioport range 0xac00-0xacfe has been reserved system 00:09: ioport range 0xad00-0xadfe has been reserved system 00:09: ioport range 0xae00-0xaefe has been reserved system 00:09: ioport range 0xaf00-0xaffe has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xdfc00000-0xdfcfffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xdfb00000-0xdfbfffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xdfa00000-0xdfafffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xdf800000-0xdf9fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff] pci_bus 0000:02: resource 1 mem: [0xdfb00000-0xdfbfffff] pci_bus 0000:03: resource 1 mem: [0xdfa00000-0xdfafffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xdf800000-0xdf9fffff] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xd00fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... rootfs image is initramfs; unpacking... Freeing initrd memory: 2413k freed Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1244191610.804:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) #######high memory 18446612137615818752, size_t 18446612137615818752 #######kcore size 5301604352, PAGE_OFFSET 0, PAGE_SIZE 4096 msgmni has been set to 7521 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Marking TSC unstable due to TSC halts in idle processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965Q Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 396k freed Write protecting the kernel read-only data: 3968k uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfdfbc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20 ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20 ata_piix 0000:00:1f.5: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20 ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20 usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /class/input/input0 generic-usb 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0 ata3: SATA link down (SStatus 0 SControl 300) ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-7: ST3250820AS, 3.ADG, max UDMA/133 ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AD PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 4 SControl 300) ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653A, D500, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653A D500 PQ: 0 ANSI: 5 ata4: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1244191617.685:2): selinux=0 auid=4294967295 ses=4294967295 input: PC Speaker as /class/input/input1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:04:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:06:27:78 input: Power Button as /class/input/input2 ACPI: Power Button [PWRF] input: Power Button as /class/input/input3 ACPI: Power Button [VBTN] parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000: 0000:04:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:dc:ed:53 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram, hpet irqs tg3.c:v3.98 (February 25, 2009) tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:03:00.0: setting latency timer to 64 tg3 0000:03:00.0: PME# disabled eth1: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:1a:a0:af:d1:f5 eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Floppy drive(s): fd0 is 1.44M sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp0: using parport0 (interrupt-driven). lp0: console ready ramfs: bad mount option: maxsize=512 md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 8193140k swap on /dev/sda3. Priority:-1 extents:1 across:8193140k platform microcode: firmware: requesting intel-ucode/06-0f-02 platform microcode: firmware: requesting intel-ucode/06-0f-02 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. warning: process `kudzu' used the deprecated sysctl system call with 1.23. Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) NET: Registered protocol family 10 lo: Disabled Privacy Extensions iscsi: registered transport (iser) e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready tg3 0000:03:00.0: PME# disabled tg3 0000:03:00.0: irq 27 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth2: link is not ready tg3: eth2: Link is up at 100 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready RPC: Registered udp transport module. RPC: Registered tcp transport module. eth0: no IPv6 routers present warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) OCFS2 Node Manager 1.5.0 OCFS2 DLM 1.5.0 ocfs2: Registered cluster interface o2cb OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 eth1: no IPv6 routers present Bridge firewalling registered ip_tables: (C) 2000-2006 Netfilter Core Team eth2: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. pci 0000:00:02.0: irq 28 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining