Linux version 2.6.30-rc7.SMP.K8-64-test3-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #28 SMP Tue Jun 2 14:06:09 PDT 2009 Command line: root=/dev/sda3 ro quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable) BIOS-e820: 00000000d7fd0000 - 00000000d7fde000 (ACPI data) BIOS-e820: 00000000d7fde000 - 00000000d8000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 0000000100000000 - 0000000228000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x228000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 00D0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000228000000 aka 8832M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xd7fd0 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000d7fd0000 0000000000 - 00d7e00000 page 2M 00d7e00000 - 00d7fd0000 page 4k kernel direct mapping tables up to d7fd0000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000228000000 0100000000 - 0228000000 page 2M kernel direct mapping tables up to 228000000 @ 14000-1e000 ACPI: RSDP 00000000000fa8d0 00024 (v02 ACPIAM) ACPI: XSDT 00000000d7fd0100 0005C (v01 112707 XSDT1716 20071127 MSFT 00000097) ACPI: FACP 00000000d7fd0290 000F4 (v03 112707 FACP1716 20071127 MSFT 00000097) ACPI: DSDT 00000000d7fd0470 04D61 (v01 0AAAA 0AAAA000 00000000 INTL 20051117) ACPI: FACS 00000000d7fde000 00040 ACPI: APIC 00000000d7fd0390 000A0 (v01 112707 APIC1716 20071127 MSFT 00000097) ACPI: MCFG 00000000d7fd0430 0003C (v01 112707 OEMMCFG 20071127 MSFT 00000097) ACPI: OEMB 00000000d7fde040 00091 (v01 112707 OEMB1716 20071127 MSFT 00000097) ACPI: SRAT 00000000d7fd51e0 00110 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: HPET 00000000d7fd52f0 00038 (v01 112707 OEMHPET0 20071127 MSFT 00000097) ACPI: SSDT 00000000d7fd5330 002E0 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d8000000 SRAT: Node 0 PXM 0 100000000-128000000 SRAT: Node 1 PXM 1 128000000-228000000 NUMA: Allocated memnodemap from 19000 - 1d540 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000128000000 NODE_DATA [000000000001d540 - 000000000001f53f] bootmap [0000000000020000 - 0000000000044fff] pages 25 (8 early reservations) ==> bootmem [0000000000 - 0128000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00009b65e4] TEXT DATA BSS ==> [0000200000 - 00009b65e4] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [00009b7000 - 00009b7160] BRK ==> [00009b7000 - 00009b7160] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000] #7 [0000019000 - 000001d540] MEMNODEMAP ==> [0000019000 - 000001d540] Bootmem setup node 1 0000000128000000-0000000228000000 NODE_DATA [0000000128000000 - 0000000128001fff] bootmap [0000000128002000 - 0000000128021fff] pages 20 (8 early reservations) ==> bootmem [0128000000 - 0228000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0000200000 - 00009b65e4] TEXT DATA BSS #3 [000009fc00 - 0000100000] BIOS reserved #4 [00009b7000 - 00009b7160] BRK #5 [0000010000 - 0000014000] PGTABLE #6 [0000014000 - 0000019000] PGTABLE #7 [0000019000 - 000001d540] MEMNODEMAP found SMP MP-table at [ffff8800000ff780] ff780 [ffffe200040c0000-ffffe200041fffff] potential offnode page_structs [ffffe20000000000-ffffe200041fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0 [ffffe20004200000-ffffe200079fffff] PMD -> [ffff880128200000-ffff88012b9fffff] on node 1 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00228000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000d7fd0 0: 0x00100000 -> 0x00128000 1: 0x00128000 -> 0x00228000 On node 0 totalpages: 1048415 DMA zone: 56 pages used for memmap DMA zone: 2086 pages reserved DMA zone: 1841 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 866312 pages, LIFO batch:31 Normal zone: 2240 pages used for memmap Normal zone: 161600 pages, LIFO batch:31 On node 1 totalpages: 1048576 Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:2 PERCPU: Remapped at ffffc20000000000 with large pages, static data 69216 bytes Built 2 zonelists in Node order, mobility grouping on. Total pages: 2063993 Policy zone: Normal Kernel command line: root=/dev/sda3 ro quiet Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1800.121 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ d8000000 size 128 MB Node 1: aperture @ d8000000 size 128 MB Memory: 8262212k/9043968k available (4081k kernel code, 656004k absent, 125752k reserved, 1867k data, 400k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.24 BogoMIPS (lpj=7200484) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3600.15 BogoMIPS (lpj=7200306) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02 Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 3600.14 BogoMIPS (lpj=7200283) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/0x2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02 Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 3600.17 BogoMIPS (lpj=7200341) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/0x3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Dual-Core AMD Opteron(tm) Processor 2210 stepping 02 Brought up 4 CPUs Total of 4 processors activated (14400.70 BogoMIPS). net_namespace: 1352 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 5545.000 MB/sec xor: using function: generic_sse (5545.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] node 0 link 0: io port [2000, 3fff] TOM: 00000000d8000000 aka 3456M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d8000000, dfffffff] TOM2: 0000000228000000 aka 8832M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [d8000000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [228000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 9B, should be 90 [20090320] ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f] pci 0000:00:01.1: reg 10 io port: [0x8c00-0x8c3f] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xfdbfb000-0xfdbfbfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfdbfac00-0xfdbfacff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:05.0: reg 10 io port: [0x8480-0x8487] pci 0000:00:05.0: reg 14 io port: [0x8400-0x8403] pci 0000:00:05.0: reg 18 io port: [0x8080-0x8087] pci 0000:00:05.0: reg 1c io port: [0x8000-0x8003] pci 0000:00:05.0: reg 20 io port: [0x7c00-0x7c0f] pci 0000:00:05.0: reg 24 32bit mmio: [0xfdbf9000-0xfdbf9fff] pci 0000:00:05.1: reg 10 io port: [0x7880-0x7887] pci 0000:00:05.1: reg 14 io port: [0x7800-0x7803] pci 0000:00:05.1: reg 18 io port: [0x7480-0x7487] pci 0000:00:05.1: reg 1c io port: [0x7400-0x7403] pci 0000:00:05.1: reg 20 io port: [0x7080-0x708f] pci 0000:00:05.1: reg 24 32bit mmio: [0xfdbf8000-0xfdbf8fff] pci 0000:00:05.2: reg 10 io port: [0x7000-0x7007] pci 0000:00:05.2: reg 14 io port: [0x6c00-0x6c03] pci 0000:00:05.2: reg 18 io port: [0x6880-0x6887] pci 0000:00:05.2: reg 1c io port: [0x6800-0x6803] pci 0000:00:05.2: reg 20 io port: [0x6480-0x648f] pci 0000:00:05.2: reg 24 32bit mmio: [0xfdbf7000-0xfdbf7fff] pci 0000:00:08.0: reg 10 32bit mmio: [0xfdbf6000-0xfdbf6fff] pci 0000:00:08.0: reg 14 io port: [0x6400-0x6407] pci 0000:00:08.0: reg 18 32bit mmio: [0xfdbfa800-0xfdbfa8ff] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfdbfa400-0xfdbfa40f] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: reg 10 32bit mmio: [0xfdbf5000-0xfdbf5fff] pci 0000:00:09.0: reg 14 io port: [0x6080-0x6087] pci 0000:00:09.0: reg 18 32bit mmio: [0xfdbfa000-0xfdbfa0ff] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfdbf4c00-0xfdbf4c0f] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.0: PME# disabled pci 0000:01:07.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:07.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:07.0: reg 18 32bit mmio: [0xfdcf0000-0xfdcfffff] pci 0000:01:07.0: reg 30 32bit mmio: [0xfdcc0000-0xfdcdffff] pci 0000:01:07.0: supports D1 D2 pci 0000:00:06.0: transparent bridge pci 0000:00:06.0: bridge io port: [0x9000-0x9fff] pci 0000:00:06.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:06.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: supports D1 pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:00:0d.0: bridge io port: [0xa000-0xcfff] pci 0000:00:0d.0: bridge 32bit mmio: [0xfdd00000-0xfdffffff] pci 0000:03:00.0: bridge io port: [0xa000-0xafff] pci 0000:03:00.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:05:04.0: reg 10 64bit mmio: [0xfdde0000-0xfddfffff] pci 0000:05:04.0: reg 20 io port: [0xac00-0xac3f] pci 0000:05:04.0: PME# supported from D0 D3hot D3cold pci 0000:05:04.0: PME# disabled pci 0000:05:04.1: reg 10 64bit mmio: [0xfddc0000-0xfdddffff] pci 0000:05:04.1: reg 20 io port: [0xa880-0xa8bf] pci 0000:05:04.1: PME# supported from D0 D3hot pci 0000:05:04.1: PME# disabled pci 0000:05:06.0: reg 10 64bit mmio: [0xfdda0000-0xfddbffff] pci 0000:05:06.0: reg 20 io port: [0xa800-0xa83f] pci 0000:05:06.0: PME# supported from D0 D3hot pci 0000:05:06.0: PME# disabled pci 0000:05:06.1: reg 10 64bit mmio: [0xfdd80000-0xfdd9ffff] pci 0000:05:06.1: reg 20 io port: [0xa480-0xa4bf] pci 0000:05:06.1: PME# supported from D0 D3hot pci 0000:05:06.1: PME# disabled pci 0000:04:00.0: bridge io port: [0xa000-0xafff] pci 0000:04:00.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:03:00.1: bridge io port: [0xb000-0xcfff] pci 0000:03:00.1: bridge 32bit mmio: [0xfde00000-0xfdffffff] pci 0000:07:04.0: reg 10 64bit mmio: [0xfdee0000-0xfdefffff] pci 0000:07:04.0: reg 20 io port: [0xbc00-0xbc3f] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: reg 10 64bit mmio: [0xfdec0000-0xfdedffff] pci 0000:07:04.1: reg 20 io port: [0xb880-0xb8bf] pci 0000:07:04.1: PME# supported from D0 D3hot pci 0000:07:04.1: PME# disabled pci 0000:07:06.0: reg 10 64bit mmio: [0xfdea0000-0xfdebffff] pci 0000:07:06.0: reg 20 io port: [0xb800-0xb83f] pci 0000:07:06.0: PME# supported from D0 D3hot pci 0000:07:06.0: PME# disabled pci 0000:07:06.1: reg 10 64bit mmio: [0xfde80000-0xfde9ffff] pci 0000:07:06.1: reg 20 io port: [0xb480-0xb4bf] pci 0000:07:06.1: PME# supported from D0 D3hot pci 0000:07:06.1: PME# disabled pci 0000:06:00.0: bridge io port: [0xb000-0xbfff] pci 0000:06:00.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:08:04.0: reg 10 64bit mmio: [0xfdfe0000-0xfdffffff] pci 0000:08:04.0: reg 20 io port: [0xcc00-0xcc3f] pci 0000:08:04.0: PME# supported from D0 D3hot D3cold pci 0000:08:04.0: PME# disabled pci 0000:08:04.1: reg 10 64bit mmio: [0xfdfc0000-0xfdfdffff] pci 0000:08:04.1: reg 20 io port: [0xc880-0xc8bf] pci 0000:08:04.1: PME# supported from D0 D3hot pci 0000:08:04.1: PME# disabled pci 0000:08:06.0: reg 10 64bit mmio: [0xfdfa0000-0xfdfbffff] pci 0000:08:06.0: reg 20 io port: [0xc800-0xc83f] pci 0000:08:06.0: PME# supported from D0 D3hot pci 0000:08:06.0: PME# disabled pci 0000:08:06.1: reg 10 64bit mmio: [0xfdf80000-0xfdf9ffff] pci 0000:08:06.1: reg 20 io port: [0xc480-0xc4bf] pci 0000:08:06.1: PME# supported from D0 D3hot pci 0000:08:06.1: PME# disabled pci 0000:06:02.0: bridge io port: [0xc000-0xcfff] pci 0000:06:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:0e.0: bridge io port: [0xd000-0xefff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold pci 0000:0a:01.0: PME# disabled pci 0000:09:00.0: bridge io port: [0xd000-0xefff] pci 0000:09:00.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff] pci 0000:0b:00.0: reg 10 32bit mmio: [0xfe8e0000-0xfe8fffff] pci 0000:0b:00.0: reg 14 32bit mmio: [0xfe8c0000-0xfe8dffff] pci 0000:0b:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:0b:00.0: reg 30 32bit mmio: [0xfe8a0000-0xfe8bffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:0b:00.1: reg 10 32bit mmio: [0xfe880000-0xfe89ffff] pci 0000:0b:00.1: reg 14 32bit mmio: [0xfe860000-0xfe87ffff] pci 0000:0b:00.1: reg 18 io port: [0xd880-0xd89f] pci 0000:0b:00.1: reg 30 32bit mmio: [0xfe840000-0xfe85ffff] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold pci 0000:0b:00.1: PME# disabled pci 0000:0a:00.0: bridge io port: [0xd000-0xdfff] pci 0000:0a:00.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff] pci 0000:0c:00.0: reg 14 32bit mmio: [0xfe9c0000-0xfe9dffff] pci 0000:0c:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:0c:00.0: reg 30 32bit mmio: [0xfe9a0000-0xfe9bffff] pci 0000:0c:00.0: PME# supported from D0 D3hot pci 0000:0c:00.0: PME# disabled pci 0000:0c:00.1: reg 10 32bit mmio: [0xfe980000-0xfe99ffff] pci 0000:0c:00.1: reg 14 32bit mmio: [0xfe960000-0xfe97ffff] pci 0000:0c:00.1: reg 18 io port: [0xe880-0xe89f] pci 0000:0c:00.1: reg 30 32bit mmio: [0xfe940000-0xfe95ffff] pci 0000:0c:00.1: PME# supported from D0 D3hot pci 0000:0c:00.1: PME# disabled pci 0000:0a:01.0: bridge io port: [0xe000-0xefff] pci 0000:0a:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:0d:00.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff] pci 0000:0d:00.0: reg 30 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:0d:00.0: PME# supported from D0 pci 0000:0d:00.0: PME# disabled pci 0000:00:0f.0: bridge 32bit mmio: [0xfea00000-0xfebfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 SCSI subsystem initialized libata version 3.00 loaded. raid6: int64x1 1665 MB/s raid6: int64x2 2230 MB/s raid6: int64x4 2139 MB/s raid6: int64x8 1492 MB/s raid6: sse2x1 2302 MB/s raid6: sse2x2 3361 MB/s raid6: sse2x4 3480 MB/s raid6: using algorithm sse2x4 (3480 MB/s) PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d8000000 size 131072 KB init_memory_mapping: 00000000d8000000-00000000e0000000 00d8000000 - 00e0000000 page 2M PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x80f has been reserved system 00:08: ioport range 0x2000-0x207f has been reserved system 00:08: ioport range 0x2080-0x20ff has been reserved system 00:08: ioport range 0x2400-0x247f has been reserved system 00:08: ioport range 0x2480-0x24ff has been reserved system 00:08: ioport range 0x2800-0x287f has been reserved system 00:08: ioport range 0x2880-0x28ff has been reserved system 00:08: ioport range 0x2c00-0x2c7f has been reserved system 00:08: ioport range 0x2c80-0x2cff has been reserved system 00:08: iomem range 0xfdb80000-0xfdbbffff has been reserved system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved system 00:0a: ioport range 0xca0-0xcaf has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: ioport range 0xa00-0xa7f has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0xd7ffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 pci 0000:00:06.0: IO window: 0x9000-0x9fff pci 0000:00:06.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:06.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: 0xa000-0xafff pci 0000:04:00.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 pci 0000:03:00.0: IO window: 0xa000-0xafff pci 0000:03:00.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:03:00.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: 0xb000-0xbfff pci 0000:06:00.0: MEM window: 0xfde00000-0xfdefffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:06:02.0: PCI bridge, secondary bus 0000:08 pci 0000:06:02.0: IO window: 0xc000-0xcfff pci 0000:06:02.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:06:02.0: PREFETCH window: disabled pci 0000:03:00.1: PCI bridge, secondary bus 0000:06 pci 0000:03:00.1: IO window: 0xb000-0xcfff pci 0000:03:00.1: MEM window: 0xfde00000-0xfdffffff pci 0000:03:00.1: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0d.0: IO window: 0xa000-0xcfff pci 0000:00:0d.0: MEM window: 0xfdd00000-0xfdffffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b pci 0000:0a:00.0: IO window: 0xd000-0xdfff pci 0000:0a:00.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:0a:00.0: PREFETCH window: disabled pci 0000:0a:01.0: PCI bridge, secondary bus 0000:0c pci 0000:0a:01.0: IO window: 0xe000-0xefff pci 0000:0a:01.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:0a:01.0: PREFETCH window: disabled pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a pci 0000:09:00.0: IO window: 0xd000-0xefff pci 0000:09:00.0: MEM window: 0xfe800000-0xfe9fffff pci 0000:09:00.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:09 pci 0000:00:0e.0: IO window: 0xd000-0xefff pci 0000:00:0e.0: MEM window: 0xfe800000-0xfe9fffff pci 0000:00:0e.0: PREFETCH window: disabled pci 0000:00:0f.0: PCI bridge, secondary bus 0000:0d pci 0000:00:0f.0: IO window: disabled pci 0000:00:0f.0: MEM window: 0xfea00000-0xfebfffff pci 0000:00:0f.0: PREFETCH window: disabled pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:0a.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:03:00.0: setting latency timer to 64 pci 0000:03:00.1: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:09:00.0: setting latency timer to 64 pci 0000:0a:00.0: setting latency timer to 64 pci 0000:0a:01.0: setting latency timer to 64 pci 0000:00:0f.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 0 io: [0xa000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfdffffff] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] pci_bus 0000:05: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:06: resource 0 io: [0xb000-0xcfff] pci_bus 0000:06: resource 1 mem: [0xfde00000-0xfdffffff] pci_bus 0000:07: resource 0 io: [0xb000-0xbfff] pci_bus 0000:07: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:08: resource 0 io: [0xc000-0xcfff] pci_bus 0000:08: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:09: resource 0 io: [0xd000-0xefff] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe9fffff] pci_bus 0000:0a: resource 0 io: [0xd000-0xefff] pci_bus 0000:0a: resource 1 mem: [0xfe800000-0xfe9fffff] pci_bus 0000:0b: resource 0 io: [0xd000-0xdfff] pci_bus 0000:0b: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:0c: resource 0 io: [0xe000-0xefff] pci_bus 0000:0c: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:0d: resource 1 mem: [0xfea00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 NTFS driver 2.1.29 [Flags: R/W]. SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 16137 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) async_tx: api initialized (sync-only) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:01:07.0: Boot video device pcieport-driver 0000:00:0a.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:0a.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0f.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:0f.0: setting latency timer to 64 pcieport-driver 0000:09:00.0: setting latency timer to 64 pcieport-driver 0000:0a:00.0: irq 28 for MSI/MSI-X pcieport-driver 0000:0a:00.0: setting latency timer to 64 pcieport-driver 0000:0a:01.0: irq 29 for MSI/MSI-X pcieport-driver 0000:0a:01.0: setting latency timer to 64 aer 0000:00:0a.0:pcie02: service driver aer loaded aer 0000:00:0d.0:pcie02: service driver aer loaded aer 0000:00:0e.0:pcie02: service driver aer loaded aer 0000:00:0f.0:pcie02: service driver aer loaded lp: driver loaded but no devices found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded nbd: registered device at major 43 Adaptec aacraid driver 1.1-5[2461]-ms QLogic Fibre Channel HBA Driver: 8.03.01-k1 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:05.0: Using SWNCQ mode sata_nv 0000:00:05.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x8480 ctl 0x8400 bmdma 0x7c00 irq 23 ata2: SATA max UDMA/133 cmd 0x8080 ctl 0x8000 bmdma 0x7c08 irq 23 ata1: hard resetting link ata1: nv: skipping hardreset on occupied port ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:05.1: Using SWNCQ mode sata_nv 0000:00:05.1: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7080 irq 22 ata4: SATA max UDMA/133 cmd 0x7480 ctl 0x7400 bmdma 0x7088 irq 22 ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:05.2: Using SWNCQ mode sata_nv 0000:00:05.2: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x7000 ctl 0x6c00 bmdma 0x6480 irq 21 ata6: SATA max UDMA/133 cmd 0x6880 ctl 0x6800 bmdma 0x6488 irq 21 ata5: hard resetting link ata5: nv: skipping hardreset on occupied port pata_amd 0000:00:04.0: version 0.4.1 pata_amd 0000:00:04.0: setting latency timer to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata5: SATA link down (SStatus 0 SControl 300) Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. ata5: EH complete ata7: soft resetting link ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 e1000 0000:05:04.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133 ata3.00: 62500000 sectors, multi 16: LBA48 NCQ (depth 31) ata7.00: ATAPI: DW-224E-V, 1.CA, max UDMA/33 ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) ata3.00: configured for UDMA/133 ata3: EH complete ata1.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata7.00: configured for UDMA/33 ata1.00: configured for UDMA/133 ata1: EH complete ata7: EH complete scsi 0:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2: hard resetting link ata2: nv: skipping hardreset on occupied port ata2: SATA link down (SStatus 0 SControl 300) ata2: EH complete scsi 2:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 2:0:0:0: Attached scsi generic sg1 type 0 ata4: hard resetting link ata4: nv: skipping hardreset on occupied port sda1 sda2 sda3 sda4 ata4: SATA link down (SStatus 0 SControl 300) ata4: EH complete sd 2:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB) ata6: hard resetting link ata6: nv: skipping hardreset on occupied port sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<6>ata6: SATA link down (SStatus 0 SControl 300) ata6: EH complete sdb1 sd 0:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: [sdb] Attached SCSI disk scsi 6:0:0:0: CD-ROM TEAC DW-224E-V 1.CA PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg2 type 5 ata8: port disabled. ignoring. ata8: EH complete e1000: 0000:05:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 e1000 0000:05:04.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 e1000: 0000:05:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f1 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17 e1000 0000:05:06.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17 e1000: 0000:05:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f2 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 16 e1000 0000:05:06.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:05:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:f3 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:07:04.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 e1000: 0000:07:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b4 e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:07:04.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 e1000: 0000:07:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b5 e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:07:06.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17 e1000: 0000:07:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b6 e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:07:06.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:07:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:de:b7 e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:08:04.0: PCI INT A -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17 e1000: 0000:08:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d4 e1000: eth8: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:08:04.1: PCI INT B -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:08:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d5 e1000: eth9: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:08:06.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 e1000: 0000:08:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d6 e1000: eth10: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:08:06.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 e1000: 0000:08:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:1b:21:1b:e0:d7 e1000: eth11: e1000_probe: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:0b:00.0: PCI INT A -> Link[LNEC] -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:0b:00.0: setting latency timer to 64 e1000e 0000:0b:00.0: irq 30 for MSI/MSI-X 0000:0b:00.0: eth12: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c0 0000:0b:00.0: eth12: Intel(R) PRO/1000 Network Connection 0000:0b:00.0: eth12: MAC: 0, PHY: 4, PBA No: d47316-004 e1000e 0000:0b:00.1: PCI INT B -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:0b:00.1: setting latency timer to 64 e1000e 0000:0b:00.1: irq 31 for MSI/MSI-X 0000:0b:00.1: eth13: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c1 0000:0b:00.1: eth13: Intel(R) PRO/1000 Network Connection 0000:0b:00.1: eth13: MAC: 0, PHY: 4, PBA No: d47316-004 e1000e 0000:0c:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:0c:00.0: setting latency timer to 64 e1000e 0000:0c:00.0: irq 32 for MSI/MSI-X 0000:0c:00.0: eth14: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c2 0000:0c:00.0: eth14: Intel(R) PRO/1000 Network Connection 0000:0c:00.0: eth14: MAC: 0, PHY: 4, PBA No: d47316-004 e1000e 0000:0c:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 e1000e 0000:0c:00.1: setting latency timer to 64 e1000e 0000:0c:00.1: irq 33 for MSI/MSI-X 0000:0c:00.1: eth15: (PCI Express:2.5GB/s:Width x4) 00:15:17:73:7f:c3 0000:0c:00.1: eth15: Intel(R) PRO/1000 Network Connection 0000:0c:00.1: eth15: MAC: 0, PHY: 4, PBA No: d47316-004 Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 forcedeth 0000:00:08.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:08.0: ifname eth16, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:b2:ac forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23 forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:09.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:09.0: ifname eth17, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:b2:ad forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 Fusion MPT misc device (ioctl) driver 3.04.07 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 input: AT Translated Set 2 keyboard as /class/input/input1 i2c-adapter i2c-1: Found a DME1737 chip at 0x2c (rev 0x8a). dme1737 1-002c: Optional features: pwm3=no, pwm5=no, pwm6=no, fan3=no, fan4=no, fan5=no, fan6=no. hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. UDF-fs: No partition found (1) XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 400k freed udev: renamed network interface eth16 to eth0 udev: renamed network interface eth17 to eth1 udev: renamed network interface eth4 to eth10 udev: renamed network interface eth5 to eth11 udev: renamed network interface eth6 to eth12 udev: renamed network interface eth7 to eth13 udev: renamed network interface eth8 to eth14 udev: renamed network interface eth9 to eth15 udev: renamed network interface eth0_rename to eth3 udev: renamed network interface eth10_rename to eth16 udev: renamed network interface eth12_rename to eth2 udev: renamed network interface eth11_rename to eth17 udev: renamed network interface eth13_rename to eth4 udev: renamed network interface eth14_rename to eth5 udev: renamed network interface eth1_rename to eth6 udev: renamed network interface eth15_rename to eth7 udev: renamed network interface eth3_rename to eth9 udev: renamed network interface eth2_rename to eth8 Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k XFS mounting filesystem sda4 Ending clean XFS mount for filesystem: sda4 forcedeth 0000:00:08.0: irq 34 for MSI/MSI-X eth0: no link during initialization. eth0: link up. ata3: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen ata3: SError: { PHYRdyChg LinkSeq TrStaTrns } ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ata3: SATA link down (SStatus 0 SControl 300) ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ata3: SATA link down (SStatus 0 SControl 300) ata3: limiting SATA link speed to 1.5 Gbps ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ata3: SATA link down (SStatus 0 SControl 300) ata3.00: disabled ata3: hard resetting link ata3: SATA link down (SStatus 0 SControl 300) ata3: EH complete ata3.00: detaching (SCSI 2:0:0:0) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 2:0:0:0: [sdb] Stopping disk sd 2:0:0:0: [sdb] START_STOP FAILED sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK ata3: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen ata3: SError: { PHYRdyChg CommWake } ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133 ata3.00: 62500000 sectors, multi 1: LBA48 NCQ (depth 31) ata3.00: configured for UDMA/133 ata3: EH complete scsi 2:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: configured for UDMA/133 ata3: EH complete sdb: detected capacity change from 0 to 32000000000