| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a8e1da0906062006l111e5e87u13a9174e23104293@mail.gmail.com>
Date: Sun, 7 Jun 2009 11:06:12 +0800
From: Dave Young <hidave.darkstar@...il.com>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
cpufreq@...r.kernel.org
Cc: davej@...hat.com, Peter Zijlstra <peterz@...radead.org>
Subject: Re: suspend/hibernate lockdep warning
cc cpufreq people, same bug exist with 2.6.30-rc8
On Tue, Jun 2, 2009 at 6:00 PM, Dave Young<hidave.darkstar@...il.com> wrote:
> git kernel with several bluetooth patch applied, suspend/hibernate
> will trigger lockdep warning, please see the full dmesg dump, if
> there's anything need to provide or test please just tell.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.30-rc7-00227-gd9244b5-dirty
> (dave@...kstar) (gcc version 4.2.4) #51 SMP Tue Jun 2 13:07:55 CST
> 2009
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] NSC Geode by NSC
> [ 0.000000] Cyrix CyrixInstead
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Transmeta GenuineTMx86
> [ 0.000000] Transmeta TransmetaCPU
> [ 0.000000] UMC UMC UMC UMC
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003d38d400 (usable)
> [ 0.000000] BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask C00000000 write-back
> [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
> [ 0.000000] 2 base 03DC00000 mask FFFC00000 uncachable
> [ 0.000000] 3 base 03E000000 mask FFE000000 uncachable
> [ 0.000000] 4 base 03DB00000 mask FFFF00000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820 update range: 000000003db00000 - 0000000040000000
> (usable) ==> (reserved)
> [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000
> (usable) ==> (reserved)
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
> [ 0.000000] 0000000000 - 0000400000 page 4k
> [ 0.000000] 0000400000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00377fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
> [ 0.000000] ACPI: RSDP 000fbd10 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 3d391e00 0006C (v01 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: DSDT 3d392400 06357 (v02 INT430 SYSFexxx 00001001
> INTL 20050624)
> [ 0.000000] ACPI: FACS 3d3a0c00 00040
> [ 0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001
> ASL 00000061)
> [ 0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D90219
> ASL 00000047)
> [ 0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000
> ASL 00000000)
> [ 0.000000] ACPI: BOOT 3d391bc0 00028 (v01 DELL M09 27D90219
> ASL 00000061)
> [ 0.000000] ACPI: SSDT 3d3902eb 0066C (v01 PmRef CpuPm 00003000
> INTL 20050624)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 91MB HIGHMEM available.
> [ 0.000000] 887MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 377fe000
> [ 0.000000] low ram: 0 - 377fe000
> [ 0.000000] node 0 low ram: 00000000 - 377fe000
> [ 0.000000] node 0 bootmap 00008000 - 0000ef00
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
> [0000001000 - 0000002000]
> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
> [0000006000 - 0000007000]
> [ 0.000000] #3 [0001000000 - 0001b03e54] TEXT DATA BSS ==>
> [0001000000 - 0001b03e54]
> [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==>
> [000009f000 - 0000100000]
> [ 0.000000] #5 [0001b04000 - 0001b0c17c] BRK ==>
> [0001b04000 - 0001b0c17c]
> [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==>
> [0000007000 - 0000008000]
> [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==>
> [0000008000 - 000000f000]
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000377fe
> [ 0.000000] HighMem 0x000377fe -> 0x0003d38d
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0003d38d
> [ 0.000000] On node 0 totalpages: 250668
> [ 0.000000] free_area_init_node: node 0, pgdat c1545c80,
> node_mem_map c1b0d000
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1744 pages used for memmap
> [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 184 pages used for memmap
> [ 0.000000] HighMem zone: 23255 pages, LIFO batch:3
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 24
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 50000000 (gap:
> 40000000:b8000000)
> [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 12 pages at c22c0000, static data 25052 bytes
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 248708
> [ 0.000000] Kernel command line: BOOT_IMAGE=dirty ro root=802
> vt.default_utf8=0 resume=/dev/sda1
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] NR_IRQS:320
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 1994.880 MHz processor.
> [ 0.003333] Console: colour dummy device 80x25
> [ 0.003333] console [tty0] enabled
> [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat,
> Inc., Ingo Molnar
> [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.003333] ... MAX_LOCK_DEPTH: 48
> [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.003333] ... CLASSHASH_SIZE: 4096
> [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.003333] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.003333] ... CHAINHASH_SIZE: 16384
> [ 0.003333] memory used by lock dependency info: 3487 kB
> [ 0.003333] per task-struct memory footprint: 1152 bytes
> [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.003333] Initializing HighMem for node 0 (000377fe:0003d38d)
> [ 0.003333] Memory: 982232k/1003060k available (3363k kernel code,
> 20124k reserved, 2146k data, 352k init, 93756k highmem)
> [ 0.003333] virtual kernel memory layout:
> [ 0.003333] fixmap : 0xfff9c000 - 0xfffff000 ( 396 kB)
> [ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.003333] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> [ 0.003333] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> [ 0.003333] .init : 0xc1567000 - 0xc15bf000 ( 352 kB)
> [ 0.003333] .data : 0xc1348f7d - 0xc1561974 (2146 kB)
> [ 0.003333] .text : 0xc1000000 - 0xc1348f7d (3363 kB)
> [ 0.003333] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=2, Nodes=1
> [ 0.003333] hpet clockevent registered
> [ 0.003333] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 0.003333] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 3991.00 BogoMIPS (lpj=6649600)
> [ 0.003333] Security Framework initialized
> [ 0.003333] Mount-cache hash table entries: 512
> [ 0.003333] Initializing cgroup subsys ns
> [ 0.003333] Initializing cgroup subsys cpuacct
> [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.003333] CPU: L2 cache: 2048K
> [ 0.003333] CPU: Physical Processor ID: 0
> [ 0.003333] CPU: Processor Core ID: 0
> [ 0.003333] using mwait in idle threads.
> [ 0.003333] Checking 'hlt' instruction... OK.
> [ 0.014575] ACPI: Core revision 20090320
> [ 0.030584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.064114] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> [ 0.066666] lockdep: fixing up alternatives.
> [ 0.066666] Booting processor 1 APIC 0x1 ip 0x6000
> [ 0.003333] Initializing CPU#1
> [ 0.003333] Calibrating delay using timer specific routine..
> 3991.26 BogoMIPS (lpj=6650020)
> [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.003333] CPU: L2 cache: 2048K
> [ 0.003333] CPU: Physical Processor ID: 0
> [ 0.003333] CPU: Processor Core ID: 1
> [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> [ 0.158259] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> [ 0.158303] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.160064] Brought up 2 CPUs
> [ 0.160070] Total of 2 processors activated (7982.26 BogoMIPS).
> [ 0.160412] khelper used greatest stack depth: 6832 bytes left
> [ 0.160485] net_namespace: 636 bytes
> [ 0.160485] Booting paravirtualized kernel on bare hardware
> [ 0.163464] regulator: core version 0.5
> [ 0.163464] Time: 15:43:36 Date: 06/02/09
> [ 0.163546] NET: Registered protocol family 16
> [ 0.163628] ACPI: bus type pci registered
> [ 0.163628] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
> [ 0.163628] PCI: MCFG area at f8000000 reserved in E820
> [ 0.163628] PCI: Using MMCONFIG for extended config space
> [ 0.163628] PCI: Using configuration type 1 for base access
> [ 0.176798] bio: create slab <bio-0> at 0
> [ 0.184105] ACPI: EC: Look up EC in DSDT
> [ 0.184454] ACPI: BIOS _OSI(Linux) query ignored
> [ 0.224020] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001
> INTL 20050624)
> [ 0.253409] ACPI: EC: non-query interrupt received, switching to
> interrupt mode
> [ 0.270332] ACPI: Interpreter enabled
> [ 0.270341] ACPI: (supports S0 S3 S4 S5)
> [ 0.270406] ACPI: Using IOAPIC for interrupt routing
> [ 0.383666] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
> [ 0.383675] ACPI: EC: driver started in interrupt mode
> [ 0.385274] ACPI: No dock devices found.
> [ 0.385305] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.385409] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
> [ 0.385409] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
> [ 0.385409] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
> [ 0.385409] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
> [ 0.386837] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
> [ 0.386982] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
> [ 0.387126] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
> [ 0.387272] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
> [ 0.387378] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.387390] pci 0000:00:1a.7: PME# disabled
> [ 0.387481] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
> [ 0.387575] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.387586] pci 0000:00:1b.0: PME# disabled
> [ 0.387717] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.387728] pci 0000:00:1c.0: PME# disabled
> [ 0.387864] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.387875] pci 0000:00:1c.1: PME# disabled
> [ 0.388016] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.388026] pci 0000:00:1c.4: PME# disabled
> [ 0.388145] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
> [ 0.388289] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
> [ 0.388433] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
> [ 0.388578] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
> [ 0.388683] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.388694] pci 0000:00:1d.7: PME# disabled
> [ 0.389072] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
> [ 0.389084] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
> [ 0.389095] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
> [ 0.389107] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
> [ 0.389119] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
> [ 0.389130] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
> [ 0.389204] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.389214] pci 0000:00:1f.2: PME# disabled
> [ 0.389279] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
> [ 0.389308] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
> [ 0.389849] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
> [ 0.390108] pci 0000:0c:00.0: supports D1 D2
> [ 0.390111] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
> [ 0.390129] pci 0000:0c:00.0: PME# disabled
> [ 0.390298] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
> [ 0.390468] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68f0000-0xf68fffff]
> [ 0.390612] pci 0000:09:00.0: PME# supported from D3hot D3cold
> [ 0.390624] pci 0000:09:00.0: PME# disabled
> [ 0.390743] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
> [ 0.390819] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
> [ 0.390855] pci 0000:02:01.0: supports D1 D2
> [ 0.390858] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.390869] pci 0000:02:01.0: PME# disabled
> [ 0.390934] pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
> [ 0.391025] pci 0000:02:01.1: supports D1 D2
> [ 0.391027] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.391039] pci 0000:02:01.1: PME# disabled
> [ 0.391106] pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff600-0xf67ff6ff]
> [ 0.391196] pci 0000:02:01.2: supports D1 D2
> [ 0.391199] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.391211] pci 0000:02:01.2: PME# disabled
> [ 0.391276] pci 0000:02:01.3: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
> [ 0.391365] pci 0000:02:01.3: supports D1 D2
> [ 0.391367] pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.391378] pci 0000:02:01.3: PME# disabled
> [ 0.391488] pci 0000:00:1e.0: transparent bridge
> [ 0.391503] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
> [ 0.391582] pci_bus 0000:00: on NUMA node 0
> [ 0.391591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.392296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> [ 0.392550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.392688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [ 0.392833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
> [ 0.421131] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
> [ 0.423425] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
> [ 0.423656] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
> [ 0.423886] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
> [ 0.424114] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> [ 0.424349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> [ 0.424584] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> [ 0.424789] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
> 12 14 15) *0, disabled.
> [ 0.424910] SCSI subsystem initialized
> [ 0.424910] libata version 3.00 loaded.
> [ 0.424910] usbcore: registered new interface driver usbfs
> [ 0.424910] usbcore: registered new interface driver hub
> [ 0.426672] usbcore: registered new device driver usb
> [ 0.426763] PCI: Using ACPI for IRQ routing
> [ 0.486720] cfg80211: Using static regulatory domain info
> [ 0.486720] cfg80211: Regulatory domain: US
> [ 0.486721] (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 0.486729] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
> [ 0.486737] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.486744] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.486751] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.486758] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.486766] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
> [ 0.486865] cfg80211: Calling CRDA for country: US
> [ 0.486976] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.486976] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 0.501730] Switched to high resolution mode on CPU 1
> [ 0.503338] Switched to high resolution mode on CPU 0
> [ 0.503355] pnp: PnP ACPI init
> [ 0.503390] ACPI: bus type pnp registered
> [ 0.583396] pnp: PnP ACPI: found 13 devices
> [ 0.583404] ACPI: ACPI bus type pnp unregistered
> [ 0.583430] system 00:05: ioport range 0xc80-0xcaf has been reserved
> [ 0.583439] system 00:05: ioport range 0xcc0-0xcff could not be reserved
> [ 0.583459] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
> [ 0.583477] system 00:09: ioport range 0xcb0-0xcbb has been reserved
> [ 0.583486] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
> [ 0.583504] system 00:0a: ioport range 0x900-0x92f has been reserved
> [ 0.583512] system 00:0a: ioport range 0x931-0x933 has been reserved
> [ 0.583520] system 00:0a: ioport range 0x935-0x97f has been reserved
> [ 0.583528] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.583536] system 00:0a: ioport range 0x1000-0x1005 has been reserved
> [ 0.583544] system 00:0a: ioport range 0x1008-0x100f has been reserved
> [ 0.583562] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
> [ 0.583571] system 00:0b: ioport range 0x1006-0x1007 has been reserved
> [ 0.583579] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
> [ 0.583588] system 00:0b: ioport range 0x1060-0x107f has been reserved
> [ 0.583596] system 00:0b: ioport range 0x1080-0x10bf has been reserved
> [ 0.583604] system 00:0b: ioport range 0x1100-0x111f has been reserved
> [ 0.583612] system 00:0b: ioport range 0x1010-0x102f has been reserved
> [ 0.583620] system 00:0b: ioport range 0x809-0x809 has been reserved
> [ 0.583639] system 00:0c: iomem range 0x0-0x9efff could not be reserved
> [ 0.583647] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
> [ 0.583656] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
> [ 0.583665] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
> [ 0.583674] system 00:0c: iomem range 0x100000-0x3d38d3ff could not
> be reserved
> [ 0.583684] system 00:0c: iomem range 0x3d38d400-0x3dafffff could
> not be reserved
> [ 0.583694] system 00:0c: iomem range 0x3db00000-0x3dbfffff has been reserved
> [ 0.583702] system 00:0c: iomem range 0xffe80000-0xffffffff has been reserved
> [ 0.583711] system 00:0c: iomem range 0xffa00000-0xffb7ffff has been reserved
> [ 0.583719] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved
> [ 0.583728] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
> [ 0.583736] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
> [ 0.583745] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
> [ 0.583754] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
> [ 0.583762] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
> [ 0.583771] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
> [ 0.583780] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
> [ 0.583788] system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
> [ 0.583797] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
> [ 0.583805] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
> [ 0.620066] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
> [ 0.620074] pci 0000:00:1c.0: IO window: disabled
> [ 0.620086] pci 0000:00:1c.0: MEM window: disabled
> [ 0.620096] pci 0000:00:1c.0: PREFETCH window: disabled
> [ 0.620111] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
> [ 0.620117] pci 0000:00:1c.1: IO window: disabled
> [ 0.620130] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
> [ 0.620141] pci 0000:00:1c.1: PREFETCH window: disabled
> [ 0.620156] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
> [ 0.620162] pci 0000:00:1c.4: IO window: disabled
> [ 0.620174] pci 0000:00:1c.4: MEM window: 0xf6800000-0xf68fffff
> [ 0.620185] pci 0000:00:1c.4: PREFETCH window: disabled
> [ 0.620211] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
> [ 0.620218] pci 0000:02:01.0: IO window: 0x002000-0x0020ff
> [ 0.620228] pci 0000:02:01.0: IO window: 0x002400-0x0024ff
> [ 0.620239] pci 0000:02:01.0: PREFETCH window: 0x50000000-0x53ffffff
> [ 0.620251] pci 0000:02:01.0: MEM window: 0x54000000-0x57ffffff
> [ 0.620262] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
> [ 0.620271] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
> [ 0.620284] pci 0000:00:1e.0: MEM window: 0xf6700000-0xf67fffff
> [ 0.620295] pci 0000:00:1e.0: PREFETCH window:
> 0x00000050000000-0x00000053ffffff
> [ 0.620327] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.620339] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.620356] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 0.620367] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.620381] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.620392] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.620405] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.620422] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> [ 0.620435] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 0.620438] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
> [ 0.620442] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
> [ 0.620445] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
> [ 0.620448] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
> [ 0.620452] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
> [ 0.620455] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff]
> [ 0.620458] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
> [ 0.620461] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
> [ 0.620464] pci_bus 0000:03: resource 0 io: [0x2000-0x20ff]
> [ 0.620467] pci_bus 0000:03: resource 1 io: [0x2400-0x24ff]
> [ 0.620470] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
> [ 0.620473] pci_bus 0000:03: resource 3 mem: [0x54000000-0x57ffffff]
> [ 0.620567] NET: Registered protocol family 2
> [ 0.663526] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.664383] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.664832] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
> [ 0.673164] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.673196] TCP reno registered
> [ 0.680235] NET: Registered protocol family 1
> [ 0.680753] Simple Boot Flag at 0x79 set to 0x1
> [ 0.683310] Microcode Update Driver: v2.00
> <tigran@...azian.fsnet.co.uk>, Peter Oruba
> [ 0.683887] audit: initializing netlink socket (disabled)
> [ 0.683926] type=2000 audit(1243957415.683:1): initialized
> [ 0.692070] highmem bounce pool size: 64 pages
> [ 0.692083] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 0.699509] VFS: Disk quotas dquot_6.5.2
> [ 0.699742] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.701725] msgmni has been set to 1735
> [ 0.702737] alg: No test for stdrng (krng)
> [ 0.703009] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 252)
> [ 0.703034] io scheduler noop registered
> [ 0.703040] io scheduler anticipatory registered
> [ 0.703046] io scheduler deadline registered
> [ 0.703205] io scheduler cfq registered (default)
> [ 0.703229] pci 0000:00:02.0: Boot video device
> [ 0.703968] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
> [ 0.703996] pcieport-driver 0000:00:1c.0: setting latency timer to 64
> [ 0.704556] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
> [ 0.704583] pcieport-driver 0000:00:1c.1: setting latency timer to 64
> [ 0.705083] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
> [ 0.705111] pcieport-driver 0000:00:1c.4: setting latency timer to 64
> [ 0.705664] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.706445] ALI M7101 PMU not found.
> [ 0.706752] vesafb: framebuffer at 0xe0000000, mapped to
> 0xf8080000, using 3072k, total 32704k
> [ 0.706762] vesafb: mode is 1024x768x16, linelength=2048, pages=20
> [ 0.706768] vesafb: scrolling: redraw
> [ 0.706774] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> [ 0.720528] Console: switching to colour frame buffer device 128x48
> [ 0.733477] fb0: VESA VGA frame buffer device
> [ 0.734168] ACPI: AC Adapter [AC] (on-line)
> [ 0.734728] input: Lid Switch as
> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> [ 0.737222] ACPI: Lid Switch [LID]
> [ 0.737494] input: Power Button as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 0.737781] ACPI: Power Button [PBTN]
> [ 0.738116] input: Sleep Button as
> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> [ 0.738367] ACPI: Sleep Button [SBTN]
> [ 0.740405] ACPI: SSDT 3d390957 002C3 (v01 PmRef BspIst 00003000
> INTL 20050624)
> [ 0.741775] ACPI: SSDT 3d390df1 005C6 (v01 PmRef BspCst 00003001
> INTL 20050624)
> [ 0.744092] Monitor-Mwait will be used to enter C-1 state
> [ 0.744151] Monitor-Mwait will be used to enter C-2 state
> [ 0.744208] Monitor-Mwait will be used to enter C-3 state
> [ 0.744229] Marking TSC unstable due to TSC halts in idle
> [ 0.744621] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 0.745019] processor ACPI_CPU:00: registered as cooling_device0
> [ 0.745170] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 0.746054] ACPI: SSDT 3d390c1a 001D7 (v01 PmRef ApIst 00003000
> INTL 20050624)
> [ 0.747384] ACPI: SSDT 3d3913b7 0008D (v01 PmRef ApCst 00003000
> INTL 20050624)
> [ 0.749022] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 0.749296] processor ACPI_CPU:01: registered as cooling_device1
> [ 0.749447] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 0.780253] thermal LNXTHERM:01: registered as thermal_zone0
> [ 0.780412] ACPI: Thermal Zone [THM] (47 C)
> [ 0.789841] Non-volatile memory driver v1.3
> [ 0.790513] i8k: unable to get SMM BIOS version
> [ 0.796130] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal
> Zotto (dz@...ian.org)
> [ 0.802371] Linux agpgart interface v0.103
> [ 0.808181] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45
> Express Chipset
> [ 0.814706] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
> [ 0.824316] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
> [ 0.830090] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
> seconds, margin is 60 seconds).
> [ 0.835884] Hangcheck: Using get_cycles().
> [ 0.841698] [drm] Initialized drm 1.1.0 20060810
> [ 0.847652] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.853365] pci 0000:00:02.0: setting latency timer to 64
> [ 0.855247] mtrr: type mismatch for e0000000,10000000 old:
> write-back new: write-combining
> [ 0.861103] [drm] MTRR allocation failed. Graphics performance may suffer.
> [ 0.867002] pci 0000:00:02.0: irq 27 for MSI/MSI-X
> [ 0.902173] acpi device:36: registered as cooling_device2
> [ 0.912783] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input3
> [ 0.918787] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 0.926148] ACPI Warning (nspredef-0437): \_SB_.PCI0.VID2._DOD:
> Return Package has no elements (empty) [20090320]
> [ 0.932708] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3b/input/input4
> [ 0.939115] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
> [ 0.945671] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 0.952268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.966797] brd: module loaded
> [ 0.973812] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.975447] loop: module loaded
> [ 0.975787] Loading iSCSI transport class v2.0-870.
> [ 0.976404] Driver 'sd' needs updating - please use bus_type methods
> [ 0.976504] Driver 'sr' needs updating - please use bus_type methods
> [ 0.976805] ahci 0000:00:1f.2: version 3.0
> [ 0.976826] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 0.976910] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
> [ 0.977024] ahci: SSS flag set, parallel bus scan disabled
> [ 0.977076] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3
> Gbps 0x33 impl SATA mode
> [ 0.977080] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led
> clo pio slum part ems
> [ 0.977089] ahci 0000:00:1f.2: setting latency timer to 64
> [ 0.980468] scsi0 : ahci
> [ 0.981015] scsi1 : ahci
> [ 0.981309] scsi2 : ahci
> [ 0.981602] scsi3 : ahci
> [ 0.981898] scsi4 : ahci
> [ 0.982194] scsi5 : ahci
> [ 0.983232] ata1: SATA max UDMA/133 abar m2048@...ed1c800 port
> 0xfed1c900 irq 28
> [ 0.983236] ata2: SATA max UDMA/133 abar m2048@...ed1c800 port
> 0xfed1c980 irq 28
> [ 0.983239] ata3: DUMMY
> [ 0.983240] ata4: DUMMY
> [ 0.983243] ata5: SATA max UDMA/133 abar m2048@...ed1c800 port
> 0xfed1cb00 irq 28
> [ 0.983247] ata6: SATA max UDMA/133 abar m2048@...ed1c800 port
> 0xfed1cb80 irq 28
> [ 0.984282] tg3.c:v3.98 (February 25, 2009)
> [ 0.984339] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.984351] tg3 0000:09:00.0: setting latency timer to 64
> [ 1.111081] tg3 0000:09:00.0: PME# disabled
> [ 1.129835] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express)
> MAC address 00:21:9b:f5:60:0f
> [ 1.135400] eth0: attached PHY is 5722/5756 (10/100/1000Base-T
> Ethernet) (WireSpeed[1])
> [ 1.140999] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
> [ 1.146598] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> [ 1.152353] sky2 driver version 1.22
> [ 1.158563] PPP generic driver version 2.4.2
> [ 1.164285] PPP Deflate Compression module registered
> [ 1.169723] PPP BSD Compression module registered
> [ 1.175542] PPP MPPE Compression module registered
> [ 1.180869] NET: Registered protocol family 24
> [ 1.186155] PPPoL2TP kernel driver, V1.0
> [ 1.191384] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
> max=256) (6 bit encapsulation enabled).
> [ 1.196829] CSLIP: code copyright 1989 Regents of the University of
> California.
> [ 1.202221] SLIP linefill/keepalive option.
> [ 1.207878] console [netcon0] enabled
> [ 1.213123] netconsole: network logging started
> [ 1.218428] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0262]
> [ 1.423373] ata5: SATA link down (SStatus 0 SControl 300)
> [ 1.428456] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.430039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.438483] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
> [ 1.443217] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
> [ 1.449479] ata1.00: configured for UDMA/133
> [ 1.454183] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
> [ 1.458969] ata2.00: applying bridge limits
> [ 1.468078] scsi 0:0:0:0: Direct-Access ATA ST9160310AS
> DE04 PQ: 0 ANSI: 5
> [ 1.474356] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
> (160 GB/149 GiB)
> [ 1.474372] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.484181] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.484198] ata2.00: configured for UDMA/100
> [ 1.493852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.493914] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.499277] sda:<5>scsi 1:0:0:0: CD-ROM TSSTcorp
> DVD+-RW TS-L633A D500 PQ: 0 ANSI: 5
> [ 1.522308] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 1.527326] Uniform CD-ROM driver Revision: 3.20
> [ 1.532874] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 1.533144] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 1.759234] sda1 sda2 sda3 sda4 < sda5 >
> [ 1.805832] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.853368] ata6: SATA link down (SStatus 4 SControl 300)
> [ 1.997743] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
> [ 2.003170] yenta_cardbus 0000:02:01.0: Socket status: 30000006
> [ 2.008653] pci_bus 0000:02: Raising subordinate bus# of parent bus
> (#02) from #03 to #06
> [ 2.014243] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
> I/O window: 0x2000 - 0x2fff
> [ 2.020016] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
> Memory window: 0xf6700000 - 0xf67fffff
> [ 2.025749] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
> Memory window: 0x50000000 - 0x53ffffff
> [ 2.283705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.289463] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 2.295222] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 2.295228] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 2.301519] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
> bus number 1
> [ 2.311123] ehci_hcd 0000:00:1a.7: debug port 1
> [ 2.316664] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> [ 2.316694] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
> [ 2.334201] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 2.339836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.345324] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.350844] usb usb1: Product: EHCI Host Controller
> [ 2.356339] usb usb1: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty ehci_hcd
> [ 2.361929] usb usb1: SerialNumber: 0000:00:1a.7
> [ 2.367828] usb usb1: configuration #1 chosen from 1 choice
> [ 2.373762] hub 1-0:1.0: USB hub found
> [ 2.379410] hub 1-0:1.0: 6 ports detected
> [ 2.385773] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 2.391237] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 2.391242] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 2.396704] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 2
> [ 2.406032] ehci_hcd 0000:00:1d.7: debug port 1
> [ 2.411412] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 2.411439] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
> [ 2.430851] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 2.436150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.441475] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.446883] usb usb2: Product: EHCI Host Controller
> [ 2.452237] usb usb2: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty ehci_hcd
> [ 2.457677] usb usb2: SerialNumber: 0000:00:1d.7
> [ 2.463242] usb usb2: configuration #1 chosen from 1 choice
> [ 2.468769] hub 2-0:1.0: USB hub found
> [ 2.474113] hub 2-0:1.0: 6 ports detected
> [ 2.479491] async/1 used greatest stack depth: 6680 bytes left
> [ 2.479811] uhci_hcd: USB Universal Host Controller Interface driver
> [ 2.479855] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 2.479866] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 2.479870] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 2.479993] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
> [ 2.480043] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
> [ 2.480122] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.480124] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.480127] usb usb3: Product: UHCI Host Controller
> [ 2.480129] usb usb3: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.480132] usb usb3: SerialNumber: 0000:00:1a.0
> [ 2.480331] usb usb3: configuration #1 chosen from 1 choice
> [ 2.480474] hub 3-0:1.0: USB hub found
> [ 2.480542] hub 3-0:1.0: 2 ports detected
> [ 2.480926] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 2.480935] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 2.480940] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 2.481069] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
> bus number 4
> [ 2.481119] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
> [ 2.481194] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.481197] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.481200] usb usb4: Product: UHCI Host Controller
> [ 2.481202] usb usb4: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.481204] usb usb4: SerialNumber: 0000:00:1a.1
> [ 2.481401] usb usb4: configuration #1 chosen from 1 choice
> [ 2.481545] hub 4-0:1.0: USB hub found
> [ 2.481560] hub 4-0:1.0: 2 ports detected
> [ 2.481912] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 2.481921] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 2.481925] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 2.482049] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
> bus number 5
> [ 2.482084] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
> [ 2.482186] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.482189] usb usb5: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.482192] usb usb5: Product: UHCI Host Controller
> [ 2.482194] usb usb5: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.482196] usb usb5: SerialNumber: 0000:00:1a.2
> [ 2.482393] usb usb5: configuration #1 chosen from 1 choice
> [ 2.482536] hub 5-0:1.0: USB hub found
> [ 2.482549] hub 5-0:1.0: 2 ports detected
> [ 2.482908] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 2.482917] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 2.482922] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 2.483045] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 6
> [ 2.483080] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
> [ 2.483155] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.483158] usb usb6: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.483160] usb usb6: Product: UHCI Host Controller
> [ 2.483162] usb usb6: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.483164] usb usb6: SerialNumber: 0000:00:1d.0
> [ 2.483381] usb usb6: configuration #1 chosen from 1 choice
> [ 2.483532] hub 6-0:1.0: USB hub found
> [ 2.483546] hub 6-0:1.0: 2 ports detected
> [ 2.483899] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 2.483909] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 2.483913] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 2.484040] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 7
> [ 2.484075] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
> [ 2.484149] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.484152] usb usb7: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.484154] usb usb7: Product: UHCI Host Controller
> [ 2.484156] usb usb7: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.484159] usb usb7: SerialNumber: 0000:00:1d.1
> [ 2.484357] usb usb7: configuration #1 chosen from 1 choice
> [ 2.484502] hub 7-0:1.0: USB hub found
> [ 2.484515] hub 7-0:1.0: 2 ports detected
> [ 2.484871] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 2.484880] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 2.484884] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 2.485038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 8
> [ 2.485073] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
> [ 2.485149] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.485152] usb usb8: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.485154] usb usb8: Product: UHCI Host Controller
> [ 2.485156] usb usb8: Manufacturer: Linux
> 2.6.30-rc7-00227-gd9244b5-dirty uhci_hcd
> [ 2.485159] usb usb8: SerialNumber: 0000:00:1d.2
> [ 2.485360] usb usb8: configuration #1 chosen from 1 choice
> [ 2.485503] hub 8-0:1.0: USB hub found
> [ 2.485517] hub 8-0:1.0: 2 ports detected
> [ 2.485970] Initializing USB Mass Storage driver...
> [ 2.486108] usbcore: registered new interface driver usb-storage
> [ 2.486113] USB Mass Storage support registered.
> [ 2.486509] usbcore: registered new interface driver libusual
> [ 2.486771] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
> 0x60,0x64 irq 1,12
> [ 2.487298] i8042.c: Warning: Keylock active.
> [ 2.877411] async/2 used greatest stack depth: 6456 bytes left
> [ 2.884291] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 2.889351] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 2.894483] async/0 used greatest stack depth: 6432 bytes left
> [ 2.894643] mice: PS/2 mouse device common for all mice
> [ 2.895990] rtc_cmos 00:03: RTC can wake from S4
> [ 2.896243] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 2.896286] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 2.896382] i2c /dev entries driver
> [ 2.896613] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
> low) -> IRQ 19
> [ 2.929803] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
> [ 2.935150] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> [ 2.940480] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
> [ 2.945854] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 2.950921] iTCO_vendor_support: vendor-support=0
> [ 2.956194] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input5
> [ 2.956551] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
> initialised: dm-devel@...hat.com
> [ 2.957625] cpuidle: using governor ladder
> [ 2.973578] cpuidle: using governor menu
> [ 2.979017] sdhci: Secure Digital Host Controller Interface driver
> [ 2.984394] sdhci: Copyright(c) Pierre Ossman
> [ 2.989745] sdhci-pci 0000:02:01.2: SDHCI controller found
> [1180:0822] (rev 21)
> [ 2.995111] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> [ 3.002810] Registered led device: mmc0::
> [ 3.009323] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
> [ 3.014980] wbsd: Winbond W83L51xD SD/MMC card interface driver
> [ 3.020310] wbsd: Copyright(c) Pierre Ossman
> [ 3.026336] dcdbas dcdbas: Dell Systems Management Base Driver
> (version 5.6.0-3.2)
> [ 3.034284] usbcore: registered new interface driver hiddev
> [ 3.039902] usbcore: registered new interface driver usbhid
> [ 3.045313] usbhid: v2.6:USB HID core driver
> [ 3.077224] Advanced Linux Sound Architecture Driver Version 1.0.20.
> [ 3.082690] ALSA device list:
> [ 3.088067] No soundcards found.
> [ 3.093396] Netfilter messages via NETLINK v0.30.
> [ 3.098826] nf_conntrack version 0.5.0 (15672 buckets, 62688 max)
> [ 3.105240] ctnetlink v0.93: registering with nfnetlink.
> [ 3.112508] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 3.117959] TCP cubic registered
> [ 3.123254] NET: Registered protocol family 17
> [ 3.128589] lib80211: common routines for IEEE802.11 drivers
> [ 3.133992] lib80211_crypt: registered algorithm 'NULL'
> [ 3.136209] Using IPI No-Shortcut mode
> [ 3.142008] PM: Checking image partition /dev/sda1
> [ 3.142052] PM: Resume from partition 8:1
> [ 3.142054] PM: Checking hibernation image.
> [ 3.142597] PM: Resume from disk failed.
> [ 3.142650] registered taskstats version 1
> [ 3.148330] Magic number: 13:423:739
> [ 3.153687] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> [ 3.282944] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
> [ 3.305659] input: AlpsPS/2 ALPS GlidePoint as
> /devices/platform/i8042/serio1/input/input7
> [ 3.321298] md: Waiting for all devices to be available before autodetect
> [ 3.332390] md: If you don't use raid, use raid=noautodetect
> [ 3.346389] md: Autodetecting RAID arrays.
> [ 3.357595] md: Scanned 0 and added 0 devices.
> [ 3.368730] md: autorun ...
> [ 3.379668] md: ... autorun DONE.
> [ 3.500188] Clocksource tsc unstable (delta = -226952928 ns)
> [ 3.678889] kjournald starting. Commit interval 5 seconds
> [ 3.690742] EXT3-fs: mounted filesystem with writeback data mode.
> [ 3.702033] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
> [ 3.713227] Freeing unused kernel memory: 352k freed
> [ 3.725244] Write protecting the kernel text: 3364k
> [ 3.736633] Write protecting the kernel read-only data: 1808k
> [ 4.876981] mount used greatest stack depth: 5944 bytes left
> [ 6.200137] modprobe used greatest stack depth: 5888 bytes left
> [ 6.343973] ACPI: WMI: Mapper loaded
> [ 6.589519] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 6.656531] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
> MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4]
> [ 6.874071] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
> low) -> IRQ 21
> [ 6.885322] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 7.294132] input: HDA Intel Mic at Ext Right Jack as
> /devices/pci0000:00/0000:00:1b.0/input/input8
> [ 7.306218] input: HDA Intel Line Out at Sep Left Jack as
> /devices/pci0000:00/0000:00:1b.0/input/input9
> [ 7.318869] input: HDA Intel HP Out at Ext Right Jack as
> /devices/pci0000:00/0000:00:1b.0/input/input10
> [ 7.692016] Adding 1004020k swap on /dev/sda1. Priority:-1
> extents:1 across:1004020k
> [ 7.947364] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c]
> [ 9.385716] EXT3 FS on sda2, internal journal
> [ 13.884721] kjournald starting. Commit interval 5 seconds
> [ 13.897477] EXT3 FS on sda3, internal journal
> [ 13.909591] EXT3-fs: mounted filesystem with writeback data mode.
> [ 14.092947] kjournald starting. Commit interval 5 seconds
> [ 14.098695] EXT3-fs warning: maximal mount count reached, running
> e2fsck is recommended
> [ 14.108890] EXT3 FS on sda5, internal journal
> [ 14.120900] EXT3-fs: mounted filesystem with writeback data mode.
> [ 23.427293] Bluetooth: Core ver 2.15
> [ 23.428189] NET: Registered protocol family 31
> [ 23.428195] Bluetooth: HCI device and connection manager initialized
> [ 23.428393] Bluetooth: HCI socket layer initialized
> [ 23.567284] Bluetooth: L2CAP ver 2.13
> [ 23.567292] Bluetooth: L2CAP socket layer initialized
> [ 24.143802] Bluetooth: SCO (Voice Link) ver 0.6
> [ 24.143810] Bluetooth: SCO socket layer initialized
> [ 24.217583] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 24.217593] Bluetooth: BNEP filters: protocol multicast
> [ 24.836796] update-mime-dat used greatest stack depth: 5864 bytes left
> [ 26.006159] smbd used greatest stack depth: 5636 bytes left
> [ 42.831168] mtrr: type mismatch for e0000000,10000000 old:
> write-back new: write-combining
> [ 820.650435] tg3 0000:09:00.0: PME# disabled
> [ 820.651546] tg3 0000:09:00.0: irq 29 for MSI/MSI-X
> [ 822.270345] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [ 822.270355] tg3: eth0: Flow control is on for TX and on for RX.
> [ 1768.287580] kio_http used greatest stack depth: 5208 bytes left
> [ 1818.286019] kio_http used greatest stack depth: 5124 bytes left
> [ 3508.573910]
> [ 3508.573911] =======================================================
> [ 3508.574131] [ INFO: possible circular locking dependency detected ]
> [ 3508.574298] 2.6.30-rc7-00227-gd9244b5-dirty #51
> [ 3508.574416] -------------------------------------------------------
> [ 3508.574571] 94cpufreq/5275 is trying to acquire lock:
> [ 3508.574694] (&(&dbs_info->work)->work){+.+...}, at: [<c10365ee>]
> __cancel_work_timer+0x8c/0x18c
> [ 3508.574936]
> [ 3508.574937] but task is already holding lock:
> [ 3508.575084] (dbs_mutex){+.+.+.}, at: [<c127297b>]
> cpufreq_governor_dbs+0x1ee/0x267
> [ 3508.575299]
> [ 3508.575299] which lock already depends on the new lock.
> [ 3508.575301]
> [ 3508.575509]
> [ 3508.575510] the existing dependency chain (in reverse order) is:
> [ 3508.575712]
> [ 3508.575713] -> #2 (dbs_mutex){+.+.+.}:
> [ 3508.575868] [<c1047d33>] __lock_acquire+0x91e/0xaa9
> [ 3508.576024] [<c1047f59>] lock_acquire+0x9b/0xbe
> [ 3508.576165] [<c1344414>] __mutex_lock_common+0x35/0x2d2
> [ 3508.576327] [<c1344749>] mutex_lock_nested+0x2e/0x36
> [ 3508.576486] [<c12727fd>] cpufreq_governor_dbs+0x70/0x267
> [ 3508.576650] [<c1270007>] __cpufreq_governor+0x66/0x9d
> [ 3508.576809] [<c1270193>] __cpufreq_set_policy+0x155/0x1c3
> [ 3508.576973] [<c127109b>] cpufreq_add_dev+0x4d4/0x5f6
> [ 3508.577120] [<c11c2bc9>] sysdev_driver_register+0x96/0xe5
> [ 3508.577175] [<c12713df>] cpufreq_register_driver+0xa1/0x168
> [ 3508.577175] [<c156f8cf>] acpi_cpufreq_init+0x99/0xab
> [ 3508.577175] [<c1001137>] do_one_initcall+0x4a/0x11a
> [ 3508.577175] [<c156750a>] kernel_init+0xfe/0x14f
> [ 3508.577175] [<c1003d1f>] kernel_thread_helper+0x7/0x10
> [ 3508.577175] [<ffffffff>] 0xffffffff
> [ 3508.577175]
> [ 3508.577175] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
> [ 3508.577175] [<c1047d33>] __lock_acquire+0x91e/0xaa9
> [ 3508.577175] [<c1047f59>] lock_acquire+0x9b/0xbe
> [ 3508.577175] [<c1344923>] down_write+0x2f/0x4b
> [ 3508.577175] [<c1270a1c>] lock_policy_rwsem_write+0x33/0x5b
> [ 3508.578971] [<c1272597>] do_dbs_timer+0x45/0x23b
> [ 3508.578971] [<c1036bc6>] worker_thread+0x170/0x23c
> [ 3508.578971] [<c1039409>] kthread+0x45/0x6c
> [ 3508.578971] [<c1003d1f>] kernel_thread_helper+0x7/0x10
> [ 3508.578971] [<ffffffff>] 0xffffffff
> [ 3508.578971]
> [ 3508.578971] -> #0 (&(&dbs_info->work)->work){+.+...}:
> [ 3508.578971] [<c1047c43>] __lock_acquire+0x82e/0xaa9
> [ 3508.578971] [<c1047f59>] lock_acquire+0x9b/0xbe
> [ 3508.578971] [<c1036619>] __cancel_work_timer+0xb7/0x18c
> [ 3508.578971] [<c10366f9>] cancel_delayed_work_sync+0xb/0xd
> [ 3508.578971] [<c127298a>] cpufreq_governor_dbs+0x1fd/0x267
> [ 3508.578971] [<c1270007>] __cpufreq_governor+0x66/0x9d
> [ 3508.578971] [<c127017d>] __cpufreq_set_policy+0x13f/0x1c3
> [ 3508.578971] [<c1270645>] store_scaling_governor+0x159/0x188
> [ 3508.578971] [<c12711ff>] store+0x42/0x5b
> [ 3508.578971] [<c10cc0ed>] sysfs_write_file+0xb8/0xe3
> [ 3508.578971] [<c10900a0>] vfs_write+0x82/0xdc
> [ 3508.578971] [<c109018f>] sys_write+0x3b/0x5d
> [ 3508.578971] [<c10032dd>] syscall_call+0x7/0xb
> [ 3508.578971] [<ffffffff>] 0xffffffff
> [ 3508.578971]
> [ 3508.578971] other info that might help us debug this:
> [ 3508.578971]
> [ 3508.578971] 3 locks held by 94cpufreq/5275:
> [ 3508.578971] #0: (&buffer->mutex){+.+.+.}, at: [<c10cc05a>]
> sysfs_write_file+0x25/0xe3
> [ 3508.578971] #1: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at:
> [<c1270a1c>] lock_policy_rwsem_write+0x33/0x5b
> [ 3508.578971] #2: (dbs_mutex){+.+.+.}, at: [<c127297b>]
> cpufreq_governor_dbs+0x1ee/0x267
> [ 3508.578971]
> [ 3508.578971] stack backtrace:
> [ 3508.578971] Pid: 5275, comm: 94cpufreq Not tainted
> 2.6.30-rc7-00227-gd9244b5-dirty #51
> [ 3508.578971] Call Trace:
> [ 3508.578971] [<c10468b9>] print_circular_bug_tail+0x5d/0x68
> [ 3508.578971] [<c1047c43>] __lock_acquire+0x82e/0xaa9
> [ 3508.578971] [<c1046439>] ? mark_lock+0x1e/0x1c7
> [ 3508.578971] [<c1047f59>] lock_acquire+0x9b/0xbe
> [ 3508.578971] [<c10365ee>] ? __cancel_work_timer+0x8c/0x18c
> [ 3508.578971] [<c1036619>] __cancel_work_timer+0xb7/0x18c
> [ 3508.578971] [<c10365ee>] ? __cancel_work_timer+0x8c/0x18c
> [ 3508.578971] [<c1046747>] ? trace_hardirqs_on_caller+0x10a/0x146
> [ 3508.578971] [<c13446a7>] ? __mutex_lock_common+0x2c8/0x2d2
> [ 3508.578971] [<c10366f9>] cancel_delayed_work_sync+0xb/0xd
> [ 3508.578971] [<c127298a>] cpufreq_governor_dbs+0x1fd/0x267
> [ 3508.578971] [<c103c5ab>] ? up_read+0x16/0x29
> [ 3508.578971] [<c1270007>] __cpufreq_governor+0x66/0x9d
> [ 3508.578971] [<c127017d>] __cpufreq_set_policy+0x13f/0x1c3
> [ 3508.578971] [<c12704ec>] ? store_scaling_governor+0x0/0x188
> [ 3508.578971] [<c1270645>] store_scaling_governor+0x159/0x188
> [ 3508.578971] [<c1270b4d>] ? handle_update+0x0/0x28
> [ 3508.578971] [<c1270a1c>] ? lock_policy_rwsem_write+0x33/0x5b
> [ 3508.578971] [<c12704ec>] ? store_scaling_governor+0x0/0x188
> [ 3508.578971] [<c12711ff>] store+0x42/0x5b
> [ 3508.578971] [<c10cc0ed>] sysfs_write_file+0xb8/0xe3
> [ 3508.578971] [<c10900a0>] vfs_write+0x82/0xdc
> [ 3508.578971] [<c10cc035>] ? sysfs_write_file+0x0/0xe3
> [ 3508.578971] [<c109018f>] sys_write+0x3b/0x5d
> [ 3508.578971] [<c10032dd>] syscall_call+0x7/0xb
> [ 3509.211597] PM: Syncing filesystems ... done.
> [ 3509.215505] PM: Preparing system for mem sleep
> [ 3509.215518] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 3509.215902] Freezing remaining freezable tasks ... (elapsed 0.00
> seconds) done.
> [ 3509.215963] PM: Entering mem sleep
> [ 3509.215976] Suspending console(s) (use no_console_suspend to debug)
> [ 3509.723360] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 3509.723603] sd 0:0:0:0: [sda] Stopping disk
> [ 3510.107827] ACPI handle has no context!
> [ 3510.107834] sdhci-pci 0000:02:01.2: PME# disabled
> [ 3510.107842] sdhci-pci 0000:02:01.2: PCI INT C disabled
> [ 3510.107849] ACPI handle has no context!
> [ 3510.124990] ACPI handle has no context!
> [ 3510.183595] tg3 0000:09:00.0: PME# enabled
> [ 3510.263231] ehci_hcd 0000:00:1d.7: PCI INT A disabled
> [ 3510.263311] ehci_hcd 0000:00:1d.7: PME# disabled
> [ 3510.276561] uhci_hcd 0000:00:1d.2: PCI INT C disabled
> [ 3510.276637] uhci_hcd 0000:00:1d.1: PCI INT B disabled
> [ 3510.276708] uhci_hcd 0000:00:1d.0: PCI INT A disabled
> [ 3510.303232] HDA Intel 0000:00:1b.0: PCI INT A disabled
> [ 3510.316561] ehci_hcd 0000:00:1a.7: PCI INT C disabled
> [ 3510.316641] ehci_hcd 0000:00:1a.7: PME# disabled
> [ 3510.329889] uhci_hcd 0000:00:1a.2: PCI INT C disabled
> [ 3510.329964] uhci_hcd 0000:00:1a.1: PCI INT B disabled
> [ 3510.330036] uhci_hcd 0000:00:1a.0: PCI INT A disabled
> [ 3510.338676] ACPI: Preparing to enter system sleep state S3
> [ 3510.370343] Disabling non-boot CPUs ...
> [ 3510.473013] CPU 1 is now offline
> [ 3510.473016] lockdep: fixing up alternatives.
> [ 3510.473019] SMP alternatives: switching to UP code
> [ 3510.476717] CPU1 is down
> [ 3510.476773] Extended CMOS year: 2000
> [ 3510.476773] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 3510.476773] Back to C!
> [ 3510.476773] Extended CMOS year: 2000
> [ 3510.476773] Enabling non-boot CPUs ...
> [ 3510.476773] lockdep: fixing up alternatives.
> [ 3510.476773] SMP alternatives: switching to SMP code
> [ 3510.479959] Booting processor 1 APIC 0x1 ip 0x6000
> [ 3510.476374] Initializing CPU#1
> [ 3510.476374] Calibrating delay using timer specific routine..
> 3991.33 BogoMIPS (lpj=6650129)
> [ 3510.476374] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 3510.476374] CPU: L2 cache: 2048K
> [ 3510.476374] CPU: Physical Processor ID: 0
> [ 3510.476374] CPU: Processor Core ID: 1
> [ 3510.476374] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> [ 3510.574730] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
> [ 3510.576337] Switched to high resolution mode on CPU 1
> [ 3510.586480] microcode: failed to init CPU1
> [ 3510.587167] CPU1 is up
> [ 3510.587170] ACPI: Waking up from system sleep state S3
> [ 3510.773459] pci 0000:00:02.0: restoring config space at offset 0xf
> (was 0x100, writing 0x10b)
> [ 3510.773469] pci 0000:00:02.0: restoring config space at offset 0x8
> (was 0x1, writing 0xefe9)
> [ 3510.773476] pci 0000:00:02.0: restoring config space at offset 0x6
> (was 0xc, writing 0xe000000c)
> [ 3510.773484] pci 0000:00:02.0: restoring config space at offset 0x1
> (was 0x900007, writing 0x900403)
> [ 3510.773520] pci 0000:00:02.1: restoring config space at offset 0x4
> (was 0x4, writing 0xf6b00004)
> [ 3510.773527] pci 0000:00:02.1: restoring config space at offset 0x1
> (was 0x900000, writing 0x900007)
> [ 3510.773545] uhci_hcd 0000:00:1a.0: restoring config space at offset
> 0xf (was 0x100, writing 0x10a)
> [ 3510.773562] uhci_hcd 0000:00:1a.0: restoring config space at offset
> 0x8 (was 0x1, writing 0x6f61)
> [ 3510.773579] uhci_hcd 0000:00:1a.0: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900001)
> [ 3510.773603] uhci_hcd 0000:00:1a.1: restoring config space at offset
> 0xf (was 0x200, writing 0x207)
> [ 3510.773620] uhci_hcd 0000:00:1a.1: restoring config space at offset
> 0x8 (was 0x1, writing 0x6f81)
> [ 3510.773637] uhci_hcd 0000:00:1a.1: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900001)
> [ 3510.773660] uhci_hcd 0000:00:1a.2: restoring config space at offset
> 0xf (was 0x300, writing 0x305)
> [ 3510.773677] uhci_hcd 0000:00:1a.2: restoring config space at offset
> 0x8 (was 0x1, writing 0x6fa1)
> [ 3510.773694] uhci_hcd 0000:00:1a.2: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900001)
> [ 3510.773750] ehci_hcd 0000:00:1a.7: restoring config space at offset
> 0x1 (was 0x2900106, writing 0x2900102)
> [ 3510.773791] HDA Intel 0000:00:1b.0: restoring config space at
> offset 0xf (was 0x100, writing 0x107)
> [ 3510.773815] HDA Intel 0000:00:1b.0: restoring config space at
> offset 0x4 (was 0xfebfc004, writing 0xf6afc004)
> [ 3510.773822] HDA Intel 0000:00:1b.0: restoring config space at
> offset 0x3 (was 0x0, writing 0x10)
> [ 3510.773830] HDA Intel 0000:00:1b.0: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100102)
> [ 3510.773869] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0xf (was 0x100, writing 0x20100)
> [ 3510.773884] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x9 (was 0x10001, writing 0x1fff1)
> [ 3510.773890] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x8 (was 0x0, writing 0xfff0)
> [ 3510.773897] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x7 (was 0x20000000, writing 0x200000f0)
> [ 3510.773904] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x6 (was 0x0, writing 0xb0b00)
> [ 3510.773914] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x3 (was 0x810000, writing 0x810010)
> [ 3510.773923] pcieport-driver 0000:00:1c.0: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100507)
> [ 3510.773989] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0xf (was 0x200, writing 0x20200)
> [ 3510.774005] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x9 (was 0x10001, writing 0x1fff1)
> [ 3510.774011] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x8 (was 0x0, writing 0xf690f690)
> [ 3510.774018] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x7 (was 0x20000000, writing 0x200000f0)
> [ 3510.774025] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x6 (was 0x0, writing 0xc0c00)
> [ 3510.774035] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x3 (was 0x810000, writing 0x810010)
> [ 3510.774044] pcieport-driver 0000:00:1c.1: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100507)
> [ 3510.774110] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0xf (was 0x100, writing 0x20100)
> [ 3510.774125] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x9 (was 0x10001, writing 0x1fff1)
> [ 3510.774132] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x8 (was 0x0, writing 0xf680f680)
> [ 3510.774139] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x7 (was 0x20000000, writing 0x200000f0)
> [ 3510.774146] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x6 (was 0x0, writing 0x90900)
> [ 3510.774156] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x3 (was 0x810000, writing 0x810010)
> [ 3510.774165] pcieport-driver 0000:00:1c.4: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100407)
> [ 3510.774247] uhci_hcd 0000:00:1d.0: restoring config space at offset
> 0x1 (was 0x2900005, writing 0x2900001)
> [ 3510.774270] uhci_hcd 0000:00:1d.1: restoring config space at offset
> 0xf (was 0x200, writing 0x207)
> [ 3510.774287] uhci_hcd 0000:00:1d.1: restoring config space at offset
> 0x8 (was 0x1, writing 0x6f21)
> [ 3510.774304] uhci_hcd 0000:00:1d.1: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900001)
> [ 3510.774327] uhci_hcd 0000:00:1d.2: restoring config space at offset
> 0xf (was 0x300, writing 0x305)
> [ 3510.774344] uhci_hcd 0000:00:1d.2: restoring config space at offset
> 0x8 (was 0x1, writing 0x6f41)
> [ 3510.774361] uhci_hcd 0000:00:1d.2: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900001)
> [ 3510.774417] ehci_hcd 0000:00:1d.7: restoring config space at offset
> 0x1 (was 0x2900106, writing 0x2900102)
> [ 3510.774458] pci 0000:00:1e.0: restoring config space at offset 0x9
> (was 0x1fff1, writing 0x53f15001)
> [ 3510.774466] pci 0000:00:1e.0: restoring config space at offset 0x7
> (was 0x2280e0f0, writing 0x22802020)
> [ 3510.774473] pci 0000:00:1e.0: restoring config space at offset 0x6
> (was 0x20020200, writing 0x20060200)
> [ 3510.774538] pci 0000:00:1f.0: restoring config space at offset 0x1
> (was 0x2100007, writing 0x2100107)
> [ 3510.774576] ahci 0000:00:1f.2: restoring config space at offset 0xf
> (was 0x400, writing 0x40a)
> [ 3510.774605] ahci 0000:00:1f.2: restoring config space at offset 0x1
> (was 0x2b00007, writing 0x2b00407)
> [ 3510.774654] i801_smbus 0000:00:1f.3: restoring config space at
> offset 0xf (was 0x200, writing 0x204)
> [ 3510.774678] i801_smbus 0000:00:1f.3: restoring config space at
> offset 0x4 (was 0x4, writing 0xf6afbf04)
> [ 3510.774688] i801_smbus 0000:00:1f.3: restoring config space at
> offset 0x1 (was 0x2800001, writing 0x2800103)
> [ 3510.774957] pci 0000:0c:00.0: restoring config space at offset 0xf
> (was 0x100, writing 0x104)
> [ 3510.775022] pci 0000:0c:00.0: restoring config space at offset 0x4
> (was 0x4, writing 0xf69fc004)
> [ 3510.775036] pci 0000:0c:00.0: restoring config space at offset 0x3
> (was 0x0, writing 0x10)
> [ 3510.775054] pci 0000:0c:00.0: restoring config space at offset 0x1
> (was 0x100000, writing 0x100106)
> [ 3510.775203] tg3 0000:09:00.0: restoring config space at offset 0xc
> (was 0x0, writing 0x33040000)
> [ 3510.775230] tg3 0000:09:00.0: restoring config space at offset 0x3
> (was 0x0, writing 0x10)
> [ 3510.775240] tg3 0000:09:00.0: restoring config space at offset 0x1
> (was 0x100000, writing 0x100506)
> [ 3510.775335] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xf (was 0x7000100, writing 0x580010a)
> [ 3510.775342] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xe (was 0x0, writing 0x24fc)
> [ 3510.775349] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xd (was 0x0, writing 0x2400)
> [ 3510.775355] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xc (was 0x0, writing 0x20fc)
> [ 3510.775362] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xb (was 0x0, writing 0x2000)
> [ 3510.775369] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0xa (was 0x0, writing 0x57fff000)
> [ 3510.775376] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x9 (was 0x0, writing 0x54000000)
> [ 3510.775382] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x8 (was 0x0, writing 0x53fff000)
> [ 3510.775389] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x7 (was 0x0, writing 0x50000000)
> [ 3510.775396] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x6 (was 0x0, writing 0xb0060302)
> [ 3510.775404] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x4 (was 0x0, writing 0xf6700000)
> [ 3510.775411] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x3 (was 0x820000, writing 0x82a800)
> [ 3510.775419] yenta_cardbus 0000:02:01.0: restoring config space at
> offset 0x1 (was 0x2100000, writing 0x2100007)
> [ 3510.775447] ohci1394 0000:02:01.1: restoring config space at offset
> 0xf (was 0x4020200, writing 0x4020204)
> [ 3510.775475] ohci1394 0000:02:01.1: restoring config space at offset
> 0x3 (was 0x800000, writing 0x804010)
> [ 3510.775484] ohci1394 0000:02:01.1: restoring config space at offset
> 0x1 (was 0x2100000, writing 0x2100106)
> [ 3510.775510] sdhci-pci 0000:02:01.2: restoring config space at
> offset 0xf (was 0x300, writing 0x303)
> [ 3510.775536] sdhci-pci 0000:02:01.2: restoring config space at
> offset 0x4 (was 0x0, writing 0xf67ff600)
> [ 3510.775542] sdhci-pci 0000:02:01.2: restoring config space at
> offset 0x3 (was 0x800000, writing 0x804010)
> [ 3510.775552] sdhci-pci 0000:02:01.2: restoring config space at
> offset 0x1 (was 0x2100000, writing 0x2100106)
> [ 3510.775577] pci 0000:02:01.3: restoring config space at offset 0xf
> (was 0x300, writing 0x303)
> [ 3510.775604] pci 0000:02:01.3: restoring config space at offset 0x4
> (was 0x0, writing 0xf67ff700)
> [ 3510.775610] pci 0000:02:01.3: restoring config space at offset 0x3
> (was 0x800000, writing 0x804010)
> [ 3510.775619] pci 0000:02:01.3: restoring config space at offset 0x1
> (was 0x2100000, writing 0x2100106)
> [ 3510.905711] pci 0000:00:02.0: PME# disabled
> [ 3510.905718] pci 0000:00:02.1: PME# disabled
> [ 3510.905771] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 3510.905779] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 3510.905806] usb usb3: root hub lost power or was reset
> [ 3510.905868] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 3510.905876] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 3510.905903] usb usb4: root hub lost power or was reset
> [ 3510.905964] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 3510.905971] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 3510.905998] usb usb5: root hub lost power or was reset
> [ 3510.906074] ehci_hcd 0000:00:1a.7: PME# disabled
> [ 3510.906079] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 3510.906087] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 3510.906095] ehci_hcd 0000:00:1a.7: PME# disabled
> [ 3510.906160] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
> low) -> IRQ 21
> [ 3510.906167] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 3510.906241] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 3510.906248] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 3510.906275] usb usb6: root hub lost power or was reset
> [ 3510.906335] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 3510.906362] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 3510.906389] usb usb7: root hub lost power or was reset
> [ 3510.906450] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 3510.906457] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 3510.906484] usb usb8: root hub lost power or was reset
> [ 3510.906560] ehci_hcd 0000:00:1d.7: PME# disabled
> [ 3510.906565] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 3510.906573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 3510.906581] ehci_hcd 0000:00:1d.7: PME# disabled
> [ 3510.906593] pci 0000:00:1e.0: setting latency timer to 64
> [ 3510.906688] ahci 0000:00:1f.2: setting latency timer to 64
> [ 3510.910217] pci 0000:0c:00.0: PME# disabled
> [ 3510.910301] tg3 0000:09:00.0: restoring config space at offset 0xc
> (was 0x0, writing 0x33040000)
> [ 3510.910415] tg3 0000:09:00.0: PME# disabled
> [ 3510.912779] tg3: eth0: Link is down.
> [ 3511.181915] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
> MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4]
> [ 3511.188023] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> [ 3511.189049] pci 0000:02:01.3: PME# disabled
> [ 3511.189208] pci 0000:00:02.0: setting latency timer to 64
> [ 3511.190275] sd 0:0:0:0: [sda] Starting disk
> [ 3511.303224] ata6: SATA link down (SStatus 4 SControl 300)
> [ 3511.303252] ata5: SATA link down (SStatus 0 SControl 300)
> [ 3511.303288] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 3511.371362] ata2.00: configured for UDMA/100
> [ 3511.433220] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
> [ 3511.433225] ata2: irq_stat 0x40000001
> [ 3511.499083] ata2.00: configured for UDMA/100
> [ 3511.499089] ata2: EH complete
> [ 3512.529890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3512.533700] ata1.00: configured for UDMA/133
> [ 3512.546550] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
> [ 3512.546554] ata1: irq_stat 0x00400040, connection status changed
> [ 3512.550306] ata1.00: configured for UDMA/133
> [ 3512.550311] ata1: EH complete
> [ 3512.586293] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [ 3512.586295] tg3: eth0: Flow control is on for TX and on for RX.
> [ 3512.667745] PM: Finishing wakeup.
> [ 3512.667750] Restarting tasks ... done.
>
--
Regards
dave
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists