| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1244845057.19708.116.camel@grinch>
Date: Fri, 12 Jun 2009 22:17:36 +0000
From: Andrew Patterson <andrew.patterson@...com>
To: "Zhang, Yanmin" <yanmin_zhang@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
Jesse Barnes <jbarnes@...tuousgeek.org>
Subject: Re: [PATCH V4: 1/3] pci: Provide Multiple Error Received and no
error source id support on AER
On Fri, 2009-06-12 at 11:08 +0800, Zhang, Yanmin wrote:
> Anyone could help me test it on powerpc? Or at least a compilation
> to see there is any compiling error/warning. I have no powerpc machine.
> Thanks.
>
> Changelog V4:
> Port the patches to Jesses' linux-next tree (mostly based on
> 2.6.30).
>
> Changelog V3:
> 1) Probe devices under the root port when the bus id of
> the source id is equal to 0; V2 does so when device id is
> equal to 0;
> 2) Add more comments on critical path of finding devices.
>
> Changelog V2:
> Version 2 adds nosourceid, a boot parameter. When
> aerdriver.nosourceid=y, aerdriver doesn't use the source
> id saved by root port. Instead, it searches the device
> tree under the root port to find the reporter. So if hardware
> has errata and root port saves a bad source id, aerdriver
> still could find the reporter.
> There are 2 scenarios under which aerdriver searches the
> device tree under root port:
> 1) nosourceid=n and error source id is equal to 0;
> 2) nosourceid=y.
>
> Based on PCI Express AER specs, a root port might receive multiple
> TLP errors while it could only save a correctable error source id
> and an uncorrectable error source id at the same time. In addition,
> some root port hardware might be unable to provide a correct source
> id, i.e., the source id, or the bus id part of the source id provided
> by root port might be equal to 0.
>
> The patchset implements the support in kernel by searching the device
> tree under the root port.
>
> Patch 1 changes parameter cb of function pci_walk_bus to return a value.
> When cb return non-zero, pci_walk_bus stops more searching on the
> device tree.
>
> Signed-off-by: Zhang Yanmin <yanmin.zhang@...ux.intel.com>
>
This one looks fine to me.
Reviewed-by: Andrew Patterson <andrew.patterson@...com>
> ---
>
> diff -Nraup linux-2.6_next/arch/powerpc/platforms/pseries/eeh_driver.c linux-2.6_next_pciwalk/arch/powerpc/platforms/pseries/eeh_driver.c
> --- linux-2.6_next/arch/powerpc/platforms/pseries/eeh_driver.c 2009-06-12 05:25:14.000000000 +0800
> +++ linux-2.6_next_pciwalk/arch/powerpc/platforms/pseries/eeh_driver.c 2009-06-12 05:28:08.000000000 +0800
> @@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_de
> * passed back in "userdata".
> */
>
> -static void eeh_report_error(struct pci_dev *dev, void *userdata)
> +static int eeh_report_error(struct pci_dev *dev, void *userdata)
> {
> enum pci_ers_result rc, *res = userdata;
> struct pci_driver *driver = dev->driver;
> @@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_
> dev->error_state = pci_channel_io_frozen;
>
> if (!driver)
> - return;
> + return 0;
>
> eeh_disable_irq(dev);
>
> if (!driver->err_handler ||
> !driver->err_handler->error_detected)
> - return;
> + return 0;
>
> rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
>
> /* A driver that needs a reset trumps all others */
> if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
> if (*res == PCI_ERS_RESULT_NONE) *res = rc;
> +
> + return 0;
> }
>
> /**
> @@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_
> * Cumulative response passed back in "userdata".
> */
>
> -static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
> +static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
> {
> enum pci_ers_result rc, *res = userdata;
> struct pci_driver *driver = dev->driver;
> @@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(stru
> if (!driver ||
> !driver->err_handler ||
> !driver->err_handler->mmio_enabled)
> - return;
> + return 0;
>
> rc = driver->err_handler->mmio_enabled (dev);
>
> /* A driver that needs a reset trumps all others */
> if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
> if (*res == PCI_ERS_RESULT_NONE) *res = rc;
> +
> + return 0;
> }
>
> /**
> * eeh_report_reset - tell device that slot has been reset
> */
>
> -static void eeh_report_reset(struct pci_dev *dev, void *userdata)
> +static int eeh_report_reset(struct pci_dev *dev, void *userdata)
> {
> enum pci_ers_result rc, *res = userdata;
> struct pci_driver *driver = dev->driver;
>
> if (!driver)
> - return;
> + return 0;
>
> dev->error_state = pci_channel_io_normal;
>
> @@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_
>
> if (!driver->err_handler ||
> !driver->err_handler->slot_reset)
> - return;
> + return 0;
>
> rc = driver->err_handler->slot_reset(dev);
> if ((*res == PCI_ERS_RESULT_NONE) ||
> (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
> if (*res == PCI_ERS_RESULT_DISCONNECT &&
> rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
> +
> + return 0;
> }
>
> /**
> * eeh_report_resume - tell device to resume normal operations
> */
>
> -static void eeh_report_resume(struct pci_dev *dev, void *userdata)
> +static int eeh_report_resume(struct pci_dev *dev, void *userdata)
> {
> struct pci_driver *driver = dev->driver;
>
> dev->error_state = pci_channel_io_normal;
>
> if (!driver)
> - return;
> + return 0;
>
> eeh_enable_irq(dev);
>
> if (!driver->err_handler ||
> !driver->err_handler->resume)
> - return;
> + return 0;
>
> driver->err_handler->resume(dev);
> +
> + return 0;
> }
>
> /**
> @@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci
> * dead, and that no further recovery attempts will be made on it.
> */
>
> -static void eeh_report_failure(struct pci_dev *dev, void *userdata)
> +static int eeh_report_failure(struct pci_dev *dev, void *userdata)
> {
> struct pci_driver *driver = dev->driver;
>
> dev->error_state = pci_channel_io_perm_failure;
>
> if (!driver)
> - return;
> + return 0;
>
> eeh_disable_irq(dev);
>
> if (!driver->err_handler ||
> !driver->err_handler->error_detected)
> - return;
> + return 0;
>
> driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
> +
> + return 0;
> }
>
> /* ------------------------------------------------------- */
> diff -Nraup linux-2.6_next/drivers/pci/bus.c linux-2.6_next_pciwalk/drivers/pci/bus.c
> --- linux-2.6_next/drivers/pci/bus.c 2009-06-12 05:25:43.000000000 +0800
> +++ linux-2.6_next_pciwalk/drivers/pci/bus.c 2009-06-12 05:28:08.000000000 +0800
> @@ -206,13 +206,18 @@ void pci_enable_bridges(struct pci_bus *
> * Walk the given bus, including any bridged devices
> * on buses under this bus. Call the provided callback
> * on each device found.
> + *
> + * We check the return of @cb each time. If it returns anything
> + * other than 0, we break out.
> + *
> */
> -void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
> +void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
> void *userdata)
> {
> struct pci_dev *dev;
> struct pci_bus *bus;
> struct list_head *next;
> + int retval;
>
> bus = top;
> down_read(&pci_bus_sem);
> @@ -236,8 +241,10 @@ void pci_walk_bus(struct pci_bus *top, v
>
> /* Run device routines with the device locked */
> down(&dev->dev.sem);
> - cb(dev, userdata);
> + retval = cb(dev, userdata);
> up(&dev->dev.sem);
> + if (retval)
> + break;
> }
> up_read(&pci_bus_sem);
> }
> diff -Nraup linux-2.6_next/drivers/pci/pcie/aer/aerdrv_core.c linux-2.6_next_pciwalk/drivers/pci/pcie/aer/aerdrv_core.c
> --- linux-2.6_next/drivers/pci/pcie/aer/aerdrv_core.c 2009-06-12 05:25:43.000000000 +0800
> +++ linux-2.6_next_pciwalk/drivers/pci/pcie/aer/aerdrv_core.c 2009-06-12 05:31:53.000000000 +0800
> @@ -109,7 +109,7 @@ int pci_cleanup_aer_correct_error_status
> #endif /* 0 */
>
>
> -static void set_device_error_reporting(struct pci_dev *dev, void *data)
> +static int set_device_error_reporting(struct pci_dev *dev, void *data)
> {
> bool enable = *((bool *)data);
>
> @@ -124,6 +124,8 @@ static void set_device_error_reporting(s
>
> if (enable)
> pcie_set_ecrc_checking(dev);
> +
> + return 0;
> }
>
> /**
> @@ -207,7 +209,7 @@ static struct device* find_source_device
> return NULL;
> }
>
> -static void report_error_detected(struct pci_dev *dev, void *data)
> +static int report_error_detected(struct pci_dev *dev, void *data)
> {
> pci_ers_result_t vote;
> struct pci_error_handlers *err_handler;
> @@ -232,16 +234,16 @@ static void report_error_detected(struct
> dev->driver ?
> "no AER-aware driver" : "no driver");
> }
> - return;
> + return 0;
> }
>
> err_handler = dev->driver->err_handler;
> vote = err_handler->error_detected(dev, result_data->state);
> result_data->result = merge_result(result_data->result, vote);
> - return;
> + return 0;
> }
>
> -static void report_mmio_enabled(struct pci_dev *dev, void *data)
> +static int report_mmio_enabled(struct pci_dev *dev, void *data)
> {
> pci_ers_result_t vote;
> struct pci_error_handlers *err_handler;
> @@ -251,15 +253,15 @@ static void report_mmio_enabled(struct p
> if (!dev->driver ||
> !dev->driver->err_handler ||
> !dev->driver->err_handler->mmio_enabled)
> - return;
> + return 0;
>
> err_handler = dev->driver->err_handler;
> vote = err_handler->mmio_enabled(dev);
> result_data->result = merge_result(result_data->result, vote);
> - return;
> + return 0;
> }
>
> -static void report_slot_reset(struct pci_dev *dev, void *data)
> +static int report_slot_reset(struct pci_dev *dev, void *data)
> {
> pci_ers_result_t vote;
> struct pci_error_handlers *err_handler;
> @@ -269,15 +271,15 @@ static void report_slot_reset(struct pci
> if (!dev->driver ||
> !dev->driver->err_handler ||
> !dev->driver->err_handler->slot_reset)
> - return;
> + return 0;
>
> err_handler = dev->driver->err_handler;
> vote = err_handler->slot_reset(dev);
> result_data->result = merge_result(result_data->result, vote);
> - return;
> + return 0;
> }
>
> -static void report_resume(struct pci_dev *dev, void *data)
> +static int report_resume(struct pci_dev *dev, void *data)
> {
> struct pci_error_handlers *err_handler;
>
> @@ -286,11 +288,11 @@ static void report_resume(struct pci_dev
> if (!dev->driver ||
> !dev->driver->err_handler ||
> !dev->driver->err_handler->resume)
> - return;
> + return 0;
>
> err_handler = dev->driver->err_handler;
> err_handler->resume(dev);
> - return;
> + return 0;
> }
>
> /**
> @@ -307,7 +309,7 @@ static void report_resume(struct pci_dev
> static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
> enum pci_channel_state state,
> char *error_mesg,
> - void (*cb)(struct pci_dev *, void *))
> + int (*cb)(struct pci_dev *, void *))
> {
> struct aer_broadcast_data result_data;
>
> diff -Nraup linux-2.6_next/include/linux/pci.h linux-2.6_next_pciwalk/include/linux/pci.h
> --- linux-2.6_next/include/linux/pci.h 2009-06-12 05:24:32.000000000 +0800
> +++ linux-2.6_next_pciwalk/include/linux/pci.h 2009-06-12 05:28:08.000000000 +0800
> @@ -789,7 +789,7 @@ const struct pci_device_id *pci_match_id
> int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
> int pass);
>
> -void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
> +void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
> void *userdata);
> int pci_cfg_space_size_ext(struct pci_dev *dev);
> int pci_cfg_space_size(struct pci_dev *dev);
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Andrew Patterson
Hewlett-Packard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists