Message-ID: <20090614133536.GB6039@nowhere>
Date:	Sun, 14 Jun 2009 15:35:37 +0200
From:	Frederic Weisbecker <fweisbec@...il.com>
To:	Mike Frysinger <vapier@...too.org>
Cc:	Steven Rostedt <rostedt@...dmis.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4] ftrace: document basic ftracer/ftracer graph needs

On Sat, Jun 13, 2009 at 11:05:19PM -0400, Mike Frysinger wrote:
> While implementing ftracer and ftracer graph support, I found the exact
> arch implementation details to be a bit lacking (and my x86 foo ain't
> great).  So after pounding out support for the Blackfin arch, start
> documenting the requirements/details.
> 
> Signed-off-by: Mike Frysinger <vapier@...too.org>
> ---
> v4
> 	- fix HAVE_FUNCTION_TRACER typo in header
> 	- add some more details about ABI state around mcount/return_to_handler
> 
>  Documentation/trace/ftrace-implementation.txt |  233 +++++++++++++++++++++++++
>  Documentation/trace/ftrace.txt                |    6 +
>  kernel/trace/Kconfig                          |   16 ++-
>  3 files changed, 252 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/trace/ftrace-implementation.txt
> 
> diff --git a/Documentation/trace/ftrace-implementation.txt b/Documentation/trace/ftrace-implementation.txt
> new file mode 100644
> index 0000000..6dbd5af
> --- /dev/null
> +++ b/Documentation/trace/ftrace-implementation.txt
> @@ -0,0 +1,233 @@
> +		ftrace guts
> +		===========
> +
> +Introduction
> +------------
> +
> +Here we will cover the architecture pieces that the common ftrace code relies
> +on for proper functioning.  Things are broken down into increasing complexity
> +so that you can start at the top and get at least basic functionality.
> +
> +Note that this focuses on architecture implementation details only.  If you
> +want more explanation of a feature in terms of common code, review the common
> +ftrace.txt file.
> +
> +
> +Prerequisites
> +-------------
> +
> +Ftrace relies on these features being implemented:
> + STACKTRACE_SUPPORT - implement save_stack_trace()
> + TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h
> +
> +
> +HAVE_FUNCTION_TRACER
> +--------------------
> +
> +You will need to implement the mcount and the ftrace_stub functions.
> +
> +The exact mcount symbol name will depend on your toolchain.  Some call it
> +"mcount", "_mcount", or even "__mcount".  You can probably figure it out by
> +running something like:
> +	$ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount
> +	        call    mcount
> +We'll make the assumption below that the symbol is "mcount" just to keep things
> +nice and simple in the examples.
> +
> +Keep in mind that the ABI that is in effect inside of the mcount function is
> +*highly* architecture/toolchain specific.  We cannot help you in this regard,
> +sorry.  Dig up some old documentation and/or find someone more familiar than
> +you to bang ideas off of.  Typically, register usage (argument/scratch/etc...)
> +is a major issue at this point, especially in relation to the location of the
> +mcount call (before/after function prologue).  You might also want to look at
> +how glibc has implemented the mcount function for your architecture.  It might
> +be (semi-)relevant.
> +
> +The mcount function should check the function pointer ftrace_trace_function
> +to see if it is set to ftrace_stub.  If it is, there is nothing for you to do,
> +so return immediately.  If it isn't, then call that function in the same way
> +the mcount function normally calls __mcount_internal -- the first argument is
> +the "frompc" while the second argument is the "selfpc" (adjusted to remove the
> +size of the mcount call that is embedded in the function).
> +
> +For example, if the function foo() calls bar(), when the bar() function calls
> +mcount(), the arguments mcount() will pass to the tracer are:
> +	"frompc" - the address bar() will use to return to foo()
> +	"selfpc" - the address bar() (with _mcount() size adjustment)
> +
> +Also keep in mind that this mcount function will be called *a lot*, so
> +optimizing for the default case of no tracer will help the smooth running of
> +your system when tracing is disabled.  So the start of the mcount function is
> +typically the bare min with checking things before returning.  That also means
> +the code flow should usually kept linear (i.e. no branching in the nop case).
> +This is of course an optimization and not a hard requirement.
> +
> +Here is some pseudo code that should help (these functions should actually be
> +implemented in assembly):
> +
> +void ftrace_stub(void)
> +{
> +	return;
> +}
> +
> +void mcount(void)
> +{
> +	/* save any bare state needed in order to do initial checking */
> +
> +	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
> +	if (ftrace_trace_function != ftrace_stub)
> +		goto do_trace;
> +
> +	/* restore any bare state */
> +
> +	return;
> +
> +do_trace:
> +
> +	/* save all state needed by the ABI (see paragraph above) */
> +
> +	unsigned long frompc = ...;
> +	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
> +	ftrace_trace_function(frompc, selfpc);
> +
> +	/* restore all state needed by the ABI */
> +}
> +
> +Don't forget to export mcount for modules !
> +extern void mcount(void);
> +EXPORT_SYMBOL(mcount);
> +
> +
> +HAVE_FUNCTION_TRACE_MCOUNT_TEST
> +-------------------------------
> +
> +This is an optional optimization for the normal case when tracing is turned off
> +in the system.  If you do not enable this Kconfig option, the common ftrace
> +code will take care of doing the checking for you.
> +
> +To support this feature, you only need to check the function_trace_stop
> +variable in the mcount function.  If it is non-zero, there is no tracing to be
> +done at all, so you can return.
> +
> +This additional pseudo code would simply be:
> +void mcount(void)
> +{
> +	/* save any bare state needed in order to do initial checking */
> +
> ++	if (function_trace_stop)
> ++		return;
> +
> +	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
> +	if (ftrace_trace_function != ftrace_stub)
> +...
> +
> +
> +HAVE_FUNCTION_GRAPH_TRACER
> +--------------------------
> +
> +Deep breath ... time to do some real work.  Here you will need to update the
> +mcount function to check ftrace graph function pointers, as well as implement
> +some functions to save (hijack) and restore the return address.
> +
> +The mcount function should check the function pointers ftrace_graph_return
> +(compare to ftrace_stub) and ftrace_graph_entry (compare to
> +ftrace_graph_entry_stub).  If either of those are not set to the relevant stub
> +function, call the arch-specific function ftrace_graph_caller which in turn
> +calls the arch-specific function prepare_ftrace_return.  Neither of these
> +function names are strictly required, but you should use them anyways to stay
> +consistent across the architecture ports -- easier to compare & contrast
> +things.
> +
> +The arguments to prepare_ftrace_return are slightly different than what are
> +passed to ftrace_trace_function.  The second argument "selfpc" is the same,
> +but the first argument should be a pointer to the "frompc".  Typically this is
> +located on the stack.  This allows the function to hijack the return address
> +temporarily to have it point to the arch-specific function return_to_handler.
> +That function will simply call the common ftrace_return_to_handler function and
> +that will return the original return address with which, you can return to the
> +original call site.
> +
> +Here is the updated mcount pseudo code:
> +void mcount(void)
> +{
> +...
> +	if (ftrace_trace_function != ftrace_stub)
> +		goto do_trace;
> +
> ++#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> ++	extern void (*ftrace_graph_return)(...);
> ++	extern void (*ftrace_graph_entry)(...);
> ++	if (ftrace_graph_return != ftrace_stub ||
> ++	    ftrace_graph_entry != ftrace_graph_entry_stub)
> ++		ftrace_graph_caller();
> ++#endif
> +
> +	/* restore any bare state */
> +...
> +
> +Here is the pseudo code for the new ftrace_graph_caller assembly function:
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +void ftrace_graph_caller(void)
> +{
> +	/* save all state needed by the ABI */
> +
> +	unsigned long *frompc = &...;
> +	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
> +	prepare_ftrace_return(frompc, selfpc);
> +
> +	/* restore all state needed by the ABI */
> +}
> +#endif
> +
> +For information on how to implement prepare_ftrace_return(), simply look at
> +the x86 version.  The only architecture-specific piece in it is the setup of
> +the fault recovery table (the asm(...) code).  The rest should be the same
> +across architectures.
> +
> +Here is the pseudo code for the new return_to_handler assembly function.  Note
> +that the ABI that applies here is different from what applies to the mcount
> +code.  Since you are returning from a function (after the epilogue), you might
> +be able to skimp on things saved/restored (usually just registers used to pass
> +return values).
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +void return_to_handler(void)
> +{
> +	/* save all state needed by the ABI (see paragraph above) */
> +
> +	void (*original_return_point)(void) = ftrace_return_to_handler();
> +
> +	/* restore all state needed by the ABI */
> +
> +	/* this is usually either a return or a jump */
> +	original_return_point();
> +}
> +#endif
> +
> +
> +HAVE_FTRACE_NMI_ENTER
> +---------------------
> +
> +If you can't trace NMI functions, then skip this option.
> +
> +<details to be filled>
> +
> +
> +HAVE_FTRACE_SYSCALLS
> +---------------------
> +
> +<details to be filled>
> +
> +
> +HAVE_FTRACE_MCOUNT_RECORD
> +-------------------------
> +
> +See scripts/recordmcount.pl for more info.
> +
> +<details to be filled>
> +
> +
> +HAVE_DYNAMIC_FTRACE
> +---------------------
> +
> +<details to be filled>
> diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
> index fd9a3e6..95a39fb 100644
> --- a/Documentation/trace/ftrace.txt
> +++ b/Documentation/trace/ftrace.txt
> @@ -27,6 +27,12 @@ disabled, and more (ftrace allows for tracer plugins, which
>  means that the list of tracers can always grow).
>  
>  
> +Implementation Details
> +----------------------
> +
> +See ftrace-implementation.txt for details for arch porters and such.
> +
> +
>  The File System
>  ---------------
>  
> diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
> index 417d198..8cbff89 100644
> --- a/kernel/trace/Kconfig
> +++ b/kernel/trace/Kconfig
> @@ -11,31 +11,41 @@ config NOP_TRACER
>  
>  config HAVE_FTRACE_NMI_ENTER
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_FUNCTION_TRACER
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_FUNCTION_GRAPH_TRACER
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_FUNCTION_TRACE_MCOUNT_TEST
>  	bool
>  	help
> -	 This gets selected when the arch tests the function_trace_stop
> -	 variable at the mcount call site. Otherwise, this variable
> -	 is tested by the called function.
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_DYNAMIC_FTRACE
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_FTRACE_MCOUNT_RECORD
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config HAVE_HW_BRANCH_TRACER
>  	bool
>  
>  config HAVE_FTRACE_SYSCALLS
>  	bool
> +	help
> +	  See Documentation/trace/ftrace-implementation.txt
>  
>  config TRACER_MAX_TRACE
>  	bool
> -- 
> 1.6.3.1
> 


Looks better now,
Thanks.

Acked-by: Frederic Weisbecker <fweisbec@...il.com>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists