linux-kernel - Re: [PATCH 8/8] 8250: add Texas Instruments AR7 internal UART

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <200906141318.38376.florian@openwrt.org>
Date:	Sun, 14 Jun 2009 13:18:36 +0200
From:	Florian Fainelli <florian@...nwrt.org>
To:	Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc:	Linux-MIPS <linux-mips@...ux-mips.org>,
	Ralf Baechle <ralf@...ux-mips.org>,
	linux-kernel@...r.kernel.org, Alan Cox <alan@...rguk.ukuu.org.uk>,
	linux-serial@...r.kernel.org
Subject: Re: [PATCH 8/8] 8250: add Texas Instruments AR7 internal UART

Le Thursday 11 June 2009 11:30:22 Thomas Bogendoerfer, vous avez écrit :
> On Thu, Jun 11, 2009 at 10:28:39AM +0200, Florian Fainelli wrote:
> > Le Friday 05 June 2009 00:20:20 Thomas Bogendoerfer, vous avez écrit :
> > > On Thu, Jun 04, 2009 at 04:22:46PM +0200, Florian Fainelli wrote:
> > > > We discussed that in private, there are a couple of things
> > > > to fix in order to get 8250 working properly with TI AR7 HW.
> > > > If you can still merge that bit, this would ease future work, thanks
> > > > !
> > >
> > > I still have a tree here, which works without any changes to the 8250
> > > serial driver on a TNETD7300 device.
> >
> > Could you show me how you register the 8250 driver ? Without the
> > 8250-specific
>
> static struct plat_serial8250_port uart0_data = {
>         .mapbase = AR7_REGS_UART0,
>         .irq = AR7_IRQ_UART0,
>         .regshift = 2,
>         .iotype = UPIO_MEM,
>         .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
> };
>
>         uart_port[0].type = PORT_16550A;
>         uart_port[0].line = 0;
>         uart_port[0].irq = AR7_IRQ_UART0;
>         uart_port[0].uartclk = ar7_bus_freq() / 2;
>         uart_port[0].iotype = UPIO_MEM;
>         uart_port[0].mapbase = AR7_REGS_UART0 + 3;
>         uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
>         uart_port[0].regshift = 2;
>         res = early_serial_setup(&uart_port[0]);
>         if (res)
>                 return res;
>
>
> the +3 comes from the fact, that this machine is configured to run big
> endian.
>
> Here is the boot log:
>
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
> serial8250: ttyS0 at MMIO 0x8610e03 (irq = 15) is a 16550A
> console handover: boot [early0] -> real [ttyS0]
> serial8250: ttyS1 at MMIO 0x8610f00 (irq = 19) is a 16550A
> loop: module loaded
> Fixed MDIO Bus: probed
>
>
> ttyS1 uses the wrong address, but there is nothing connected to
> that port on the box.
>
> Do you see the problem on TNETD7200 devices as well ?

I no longer have TNETD7200 devices to test on unfortunately.

What I just found is that TNETD7300GDU revision 5 does not have this bug, 
while TNETD7300GDU revision 4 has. This seems to confirm the HW bug 
hypothesis. Let's just clean the serial console registration and we will keep 
in OpenWrt the 8250 workaround for older TNETD7300 revisions.
-- 
Best regards, Florian Fainelli
Email : florian@...nwrt.org
http://openwrt.org
-------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/