Booting 'Linux 2.6.30' kernel /vmlinuz-2.6.30 ro root=/dev/VolGroup00/LogVol00 ignore_loglevel console =ttyS0,115200 console=tty0 [Linux-bzImage, setup=0x3200, size=0x1e89e0] initrd /initrd-2.6.30.img [Linux-initrd @ 0x37c05000, 0x3eae6a bytes] Linux version 2.6.30 (jeremy@victim.goop.org) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #225 SMP PREEMPT Wed Jun 17 14:05:04 PDT 2009 Command line: ro root=/dev/VolGroup00/LogVol00 ignore_loglevel console=ttyS0,115200 console=tty0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d65b000 (usable) BIOS-e820: 000000007d65b000 - 000000007d6b6000 (ACPI NVS) BIOS-e820: 000000007d6b6000 - 000000007e5f8000 (usable) BIOS-e820: 000000007e5f8000 - 000000007e605000 (reserved) BIOS-e820: 000000007e605000 - 000000007e693000 (usable) BIOS-e820: 000000007e693000 - 000000007e698000 (ACPI data) BIOS-e820: 000000007e698000 - 000000007e699000 (usable) BIOS-e820: 000000007e699000 - 000000007e6f2000 (ACPI NVS) BIOS-e820: 000000007e6f2000 - 000000007e6ff000 (ACPI data) BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) debug: ignoring loglevel setting. DMI 2.4 present. last_pfn = 0x7e700 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 07E700000 mask FFFF00000 uncachable 1 base 07E800000 mask FFF800000 uncachable 2 base 07F000000 mask FFF000000 uncachable 3 base 080000000 mask F80000000 uncachable 4 base 07E6AB000 mask FFFFFF000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007e700000 0000000000 - 007e600000 page 2M 007e600000 - 007e700000 page 4k kernel direct mapping tables up to 7e700000 @ 8000-c000 RAMDISK: 37c05000 - 37fefe6a ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) ACPI: RSDT 000000007e6fd038 00050 (v01 INTEL DG965MQ 000006DA 01000013) ACPI: FACP 000000007e6fc000 00074 (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: DSDT 000000007e6f7000 041E6 (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: FACS 000000007e699000 00040 ACPI: APIC 000000007e6f6000 00078 (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: WDDT 000000007e6f5000 00040 (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: MCFG 000000007e6f4000 0003C (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: ASF! 000000007e6f3000 000A6 (v32 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: HPET 000000007e6f2000 00038 (v01 INTEL DG965MQ 000006DA MSFT 01000013) ACPI: SSDT 000000007e697000 0020C (v01 INTEL CpuPm 000006DA MSFT 01000013) ACPI: SSDT 000000007e696000 00175 (v01 INTEL Cpu0Ist 000006DA MSFT 01000013) ACPI: SSDT 000000007e695000 00175 (v01 INTEL Cpu1Ist 000006DA MSFT 01000013) ACPI: SSDT 000000007e694000 00175 (v01 INTEL Cpu2Ist 000006DA MSFT 01000013) ACPI: SSDT 000000007e693000 00175 (v01 INTEL Cpu3Ist 000006DA MSFT 01000013) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007e700000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00015089b0] TEXT DATA BSS ==> [0001000000 - 00015089b0] #3 [0037c05000 - 0037fefe6a] RAMDISK ==> [0037c05000 - 0037fefe6a] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #5 [0001509000 - 00015091a6] BRK ==> [0001509000 - 00015091a6] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe200] fe200 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880001a00000-ffff8800039fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000100 -> 0x0007d65b 0: 0x0007d6b6 -> 0x0007e5f8 0: 0x0007e605 -> 0x0007e693 0: 0x0007e698 -> 0x0007e699 0: 0x0007e6ff -> 0x0007e700 On node 0 totalpages: 517564 DMA zone: 64 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3816 pages, LIFO batch:0 DMA32 zone: 8028 pages used for memmap DMA32 zone: 505553 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007d65b000 - 000000007d6b6000 PM: Registered nosave memory: 000000007e5f8000 - 000000007e605000 PM: Registered nosave memory: 000000007e693000 - 000000007e698000 PM: Registered nosave memory: 000000007e699000 - 000000007e6f2000 PM: Registered nosave memory: 000000007e6f2000 - 000000007e6ff000 Allocating PCI resources starting at 7f000000 (gap: 7f000000:71000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages at ffff880001522000, static data 80288 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509369 Kernel command line: ro root=/dev/VolGroup00/LogVol00 ignore_loglevel console=ttyS0,115200 console=tty0 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 2023944k/2071552k available (2555k kernel code, 1296k absent, 45624k reserved, 1417k data, 404k init) NR_IRQS:4352 nr_irqs:440 Fast TSC calibration using PIT Detected 2400.012 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.02 BogoMIPS (lpj=9600048) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=9600343) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9600.19 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x90300000-0x903fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 20 io port: [0x3410-0x3417] pci 0000:00:02.1: reg 10 32bit mmio: [0x90200000-0x902fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0x90426100-0x9042610f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0x90400000-0x9041ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0x90424000-0x90424fff] pci 0000:00:19.0: reg 18 io port: [0x30e0-0x30ff] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df] pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90425c00-0x90425fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0x90420000-0x90423fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90425800-0x90425bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x3408-0x340f] pci 0000:00:1f.2: reg 14 io port: [0x341c-0x341f] pci 0000:00:1f.2: reg 18 io port: [0x3400-0x3407] pci 0000:00:1f.2: reg 1c io port: [0x3418-0x341b] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90425000-0x904257ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x90426000-0x904260ff] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] pci 0000:02:00.0: reg 10 io port: [0x2018-0x201f] pci 0000:02:00.0: reg 14 io port: [0x2024-0x2027] pci 0000:02:00.0: reg 18 io port: [0x2010-0x2017] pci 0000:02:00.0: reg 1c io port: [0x2020-0x2023] pci 0000:02:00.0: reg 20 io port: [0x2000-0x200f] pci 0000:02:00.0: reg 24 32bit mmio: [0x90100000-0x901001ff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: PME# supported from D0 D1 D3hot pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff] pci 0000:06:00.0: reg 10 32bit mmio: [0x90020000-0x9003ffff] pci 0000:06:00.0: reg 14 32bit mmio: [0x90000000-0x9001ffff] pci 0000:06:00.0: reg 18 io port: [0x1000-0x103f] pci 0000:06:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:03.0: reg 10 32bit mmio: [0x90044000-0x900447ff] pci 0000:06:03.0: reg 14 32bit mmio: [0x90040000-0x90043fff] pci 0000:06:03.0: supports D1 D2 pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:06:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x360-0x361 has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff pci 0000:00:1e.0: PREFETCH window: 0x00000090500000-0x000000905fffff alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff] pci_bus 0000:06: resource 1 mem: [0x90000000-0x900fffff] pci_bus 0000:06: resource 2 pref mem [0x90500000-0x905fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 4011k freed audit: initializing netlink socket (disabled) type=2000 audit(1245273135.176:1): initialized msgmni has been set to 3962 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device vga16fb: initializing vga16fb: mapped to 0xffff8800000a0000 fb0: VGA16 VGA frame buffer device input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /class/input/input1 ACPI: Sleep Button [SLPB] processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) XENFS: not registering filesystem on non-xen platform Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965G Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 24 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:d6:c8:c9 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 Freeing unused kernel memory: 404k freed input: AT Translated Set 2 keyboard as /class/input/input2 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90425c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90425800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 25 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425100 irq 25 ata2: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425180 irq 25 ata3: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425200 irq 25 ata4: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425280 irq 25 ata5: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425300 irq 25 ata6: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425380 irq 25 ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors: (164 GB/153 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATAPI: PLEXTOR DVDR PX-755A, 1.02, max UDMA/66 ata2.00: applying bridge limits ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.02 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pata_marvell 0000:02:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17 ata8: DUMMY BUG: sleeping function called from invalid context at /home/jeremy/git/linux/mm/slab.c:3029 in_atomic(): 1, irqs_disabled(): 0, pid: 388, name: lvm Pid: 388, comm: lvm Not tainted 2.6.30 #225 Call Trace: [] ? __init_rwsem+0x29/0x39 [] __might_sleep+0x110/0x112 [] kmem_cache_alloc+0x38/0x12b [] ? mempool_alloc_pages_isa+0x0/0x10 [] mempool_create_node+0x2f/0x152 [] ? mempool_free_pages+0x0/0xb [] mempool_create+0xd/0xf [] init_emergency_isa_pool+0x28/0x4f [] blk_queue_bounce_limit+0x40/0x56 [] dm_table_set_restrictions+0x82/0xa6 [dm_mod] [] dm_swap_table+0x132/0x15a [dm_mod] [] dev_suspend+0xfd/0x177 [dm_mod] [] dm_ctl_ioctl+0x252/0x2a2 [dm_mod] [] ? dev_suspend+0x0/0x177 [dm_mod] [] vfs_ioctl+0x2a/0x77 [] do_vfs_ioctl+0x4a7/0x4fa [] sys_ioctl+0x57/0x7a [] system_call_fastpath+0x16/0x1b isa bounce pool size: 16 pages EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. SELinux: Disabled at runtime. type=1404 audit(1245273156.512:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10 firewire_core: created device fw0: GUID 0090270001b490a1, S400 loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xcb platform microcode: firmware: requesting intel-ucode/06-0f-06 microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xcb platform microcode: firmware: requesting intel-ucode/06-0f-06 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. e1000e 0000:00:19.0: irq 24 for MSI/MSI-X e1000e 0000:00:19.0: irq 24 for MSI/MSI-X e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)