lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1245308072-14392-3-git-send-email-s.hauer@pengutronix.de>
Date:	Thu, 18 Jun 2009 08:54:32 +0200
From:	Sascha Hauer <s.hauer@...gutronix.de>
To:	linux-kernel@...r.kernel.org
Cc:	David Brownell <david-b@...bell.net>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 2/2] SPI: Add SPI driver for most known i.MX SoCs

v2: Updated and tested on i.MX35

While there already is a SPI driver for i.MX1 in the tree there are
good reasons to replace it:

- The inkernel driver implements a full blown SPI driver, but
  the hardware can be fully supported using a bitbang driver.
  This greatly reduces the size and complexity of the driver.
- The inkernel driver only works on i.MX1 SoCs. Unfortunately
  Freescale decided to randomly mix the register bits for each
  new SoC, This is quite hard to handle with the current driver
  since it has register accesses in many places.
- The DMA API of the durrent driver is broken for arch-mx1 (as opposed
  to arch-imx) and nobody cared to fix it yet.

This driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type
EEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC.

Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@....de>
---
 arch/arm/plat-mxc/include/mach/spi.h |   27 ++
 drivers/spi/Kconfig                  |    8 +
 drivers/spi/Makefile                 |    1 +
 drivers/spi/mxc_spi.c                |  685 ++++++++++++++++++++++++++++++++++
 4 files changed, 721 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/spi.h
 create mode 100644 drivers/spi/mxc_spi.c

diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
new file mode 100644
index 0000000..08be445
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/spi.h
@@ -0,0 +1,27 @@
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ *              pins, numbers < 0 mean internal CSPI chipselects according
+ *              to MXC_SPI_CS(). Normally you want to use gpio based chip
+ *              selects as the CSPI module tries to be intelligent about
+ *              when to assert the chipselect: The CSPI module deasserts the
+ *              chipselect once it runs out of input data. The other problem
+ *              is that it is not possible to mix between high active and low
+ *              active chipselects on one single bus using the internal
+ *              chipselects. Unfortunately Freescale decided to put some
+ *              chipselects on dedicated pins which are not usable as gpios,
+ *              so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+	int	*chipselect;
+	int	num_chipselect;
+};
+
+#define MXC_SPI_CS(no)	((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3c0590a..9d1874f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -116,6 +116,14 @@ config SPI_GPIO
 	  GPIO operations, you should be able to leverage that for better
 	  speed with a custom version of this driver; see the source code.
 
+config SPI_IMX
+	tristate "Freescale i.MX SPI controllers"
+	depends on ARCH_MXC
+	select SPI_BITBANG
+	help
+	  This enables using the Freescale i.MX SPI controllers in master
+	  mode.
+
 config SPI_LM70_LLP
 	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
 	depends on PARPORT && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 55a862d..482c9b3 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+obj-$(CONFIG_SPI_IMX)			+= mxc_spi.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
new file mode 100644
index 0000000..b144723
--- /dev/null
+++ b/drivers/spi/mxc_spi.c
@@ -0,0 +1,685 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/types.h>
+
+#include <mach/spi.h>
+
+#define DRIVER_NAME "spi_imx"
+
+#define MXC_CSPIRXDATA		0x00
+#define MXC_CSPITXDATA		0x04
+#define MXC_CSPICTRL		0x08
+#define MXC_CSPIINT		0x0c
+#define MXC_RESET		0x1c
+
+/* generic defines to abstract from the different register layouts */
+#define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
+#define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
+
+struct mxc_spi_config {
+	unsigned int speed_hz;
+	unsigned int bpw;
+	unsigned int mode;
+	int cs;
+};
+
+struct mxc_spi_data {
+	struct spi_bitbang bitbang;
+
+	struct completion xfer_done;
+	void *base;
+	int irq;
+	struct clk *clk;
+	unsigned long spi_clk;
+	int *chipselect;
+
+	unsigned int count;
+	void (*tx)(struct mxc_spi_data *);
+	void (*rx)(struct mxc_spi_data *);
+	void *rx_buf;
+	const void *tx_buf;
+	unsigned int txfifo; /* number of words pushed in tx FIFO */
+
+	/* SoC specific functions */
+	void (*intctrl)(struct mxc_spi_data *, int);
+	int (*config)(struct mxc_spi_data *, struct mxc_spi_config *);
+	void (*trigger)(struct mxc_spi_data *);
+	int (*rx_available)(struct mxc_spi_data *);
+};
+
+#define MXC_SPI_BUF_RX(type)						\
+static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi)		\
+{									\
+	unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA);	\
+									\
+	if (mxc_spi->rx_buf) {						\
+		*(type *)mxc_spi->rx_buf = val;				\
+		mxc_spi->rx_buf += sizeof(type);			\
+	}								\
+}
+
+#define MXC_SPI_BUF_TX(type)						\
+static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi)		\
+{									\
+	type val = 0;							\
+									\
+	if (mxc_spi->tx_buf) {						\
+		val = *(type *)mxc_spi->tx_buf;				\
+		mxc_spi->tx_buf += sizeof(type);			\
+	}								\
+									\
+	mxc_spi->count -= sizeof(type);					\
+									\
+	writel(val, mxc_spi->base + MXC_CSPITXDATA);			\
+}
+
+MXC_SPI_BUF_RX(u8)
+MXC_SPI_BUF_TX(u8)
+MXC_SPI_BUF_RX(u16)
+MXC_SPI_BUF_TX(u16)
+MXC_SPI_BUF_RX(u32)
+MXC_SPI_BUF_TX(u32)
+
+/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
+ * (which is currently not the case in this driver)
+ */
+static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
+	256, 384, 512, 768, 1024};
+
+/* MX21, MX27 */
+static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, max;
+
+	if (cpu_is_mx21())
+		max = 18;
+	else
+		max = 16;
+
+	for (i = 2; i < max; i++)
+		if (fspi * mxc_clkdivs[i] >= fin)
+			return i;
+
+	return max;
+}
+
+/* MX1, MX31, MX35 */
+static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, div = 4;
+
+	for (i = 0; i < 7; i++) {
+		if (fspi * div >= fin)
+			return i;
+		div <<= 1;
+	}
+
+	return 7;
+}
+
+#define MX31_INTREG_TEEN	(1 << 0)
+#define MX31_INTREG_RREN	(1 << 3)
+
+#define MX31_CSPICTRL_ENABLE	(1 << 0)
+#define MX31_CSPICTRL_MASTER	(1 << 1)
+#define MX31_CSPICTRL_XCH	(1 << 2)
+#define MX31_CSPICTRL_POL	(1 << 4)
+#define MX31_CSPICTRL_PHA	(1 << 5)
+#define MX31_CSPICTRL_SSCTL	(1 << 6)
+#define MX31_CSPICTRL_SSPOL	(1 << 7)
+#define MX31_CSPICTRL_BC_SHIFT	8
+#define MX35_CSPICTRL_BL_SHIFT	20
+#define MX31_CSPICTRL_CS_SHIFT	24
+#define MX35_CSPICTRL_CS_SHIFT	12
+#define MX31_CSPICTRL_DR_SHIFT	16
+
+#define MX31_CSPISTATUS		0x14
+#define MX31_STATUS_RR		(1 << 3)
+
+/* These functions also work for the i.MX35, but be aware that
+ * the i.MX35 has a slightly different register layout for bits
+ * we do not use here.
+ */
+static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX31_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX31_INTREG_RREN;
+
+	writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx31_trigger(struct mxc_spi_data *mxc_spi)
+{
+	unsigned int reg;
+
+	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg |= MX31_CSPICTRL_XCH;
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx31_config(struct mxc_spi_data *mxc_spi,
+		struct mxc_spi_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+
+	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	if (cpu_is_mx31())
+		reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
+	else if (cpu_is_mx35()) {
+		reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+		reg |= MX31_CSPICTRL_SSCTL;
+	}
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (config->cs < 0) {
+		if (cpu_is_mx31())
+			reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+		else if (cpu_is_mx35())
+			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+	}
+
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
+{
+	return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+}
+
+#define MX27_INTREG_RR		(1 << 4)
+#define MX27_INTREG_TEEN	(1 << 9)
+#define MX27_INTREG_RREN	(1 << 13)
+
+#define MX27_CSPICTRL_POL	(1 << 5)
+#define MX27_CSPICTRL_PHA	(1 << 6)
+#define MX27_CSPICTRL_SSPOL	(1 << 8)
+#define MX27_CSPICTRL_XCH	(1 << 9)
+#define MX27_CSPICTRL_ENABLE	(1 << 10)
+#define MX27_CSPICTRL_MASTER	(1 << 11)
+#define MX27_CSPICTRL_DR_SHIFT	14
+#define MX27_CSPICTRL_CS_SHIFT	19
+
+static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX27_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX27_INTREG_RREN;
+
+	writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx27_trigger(struct mxc_spi_data *mxc_spi)
+{
+	unsigned int reg;
+
+	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg |= MX27_CSPICTRL_XCH;
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx27_config(struct mxc_spi_data *mxc_spi,
+		struct mxc_spi_config *config)
+{
+	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+
+	reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) <<
+		MX27_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX27_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX27_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX27_CSPICTRL_SSPOL;
+	if (config->cs < 0)
+		reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
+{
+	return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR;
+}
+
+#define MX1_INTREG_RR		(1 << 3)
+#define MX1_INTREG_TEEN		(1 << 8)
+#define MX1_INTREG_RREN		(1 << 11)
+
+#define MX1_CSPICTRL_POL	(1 << 4)
+#define MX1_CSPICTRL_PHA	(1 << 5)
+#define MX1_CSPICTRL_XCH	(1 << 8)
+#define MX1_CSPICTRL_ENABLE	(1 << 9)
+#define MX1_CSPICTRL_MASTER	(1 << 10)
+#define MX1_CSPICTRL_DR_SHIFT	13
+
+static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX1_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX1_INTREG_RREN;
+
+	writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx1_trigger(struct mxc_spi_data *mxc_spi)
+{
+	unsigned int reg;
+
+	reg = readl(mxc_spi->base + MXC_CSPICTRL);
+	reg |= MX1_CSPICTRL_XCH;
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx1_config(struct mxc_spi_data *mxc_spi,
+		struct mxc_spi_config *config)
+{
+	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
+
+	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+		MX1_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX1_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX1_CSPICTRL_POL;
+
+	writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx1_rx_available(struct mxc_spi_data *mxc_spi)
+{
+	return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR;
+}
+
+static void mxc_spi_chipselect(struct spi_device *spi, int is_active)
+{
+	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+	unsigned int cs = 0;
+	int gpio = mxc_spi->chipselect[spi->chip_select];
+	struct mxc_spi_config config;
+
+	if (spi->mode & SPI_CS_HIGH)
+		cs = 1;
+
+	if (is_active == BITBANG_CS_INACTIVE) {
+		if (gpio >= 0)
+			gpio_set_value(gpio, !cs);
+		return;
+	}
+
+	config.bpw = spi->bits_per_word;
+	config.speed_hz = spi->max_speed_hz;
+	config.mode = spi->mode;
+	config.cs = mxc_spi->chipselect[spi->chip_select];
+
+	mxc_spi->config(mxc_spi, &config);
+
+	/* Initialize the functions for transfer */
+	if (config.bpw <= 8) {
+		mxc_spi->rx = mxc_spi_buf_rx_u8;
+		mxc_spi->tx = mxc_spi_buf_tx_u8;
+	} else if (config.bpw <= 16) {
+		mxc_spi->rx = mxc_spi_buf_rx_u16;
+		mxc_spi->tx = mxc_spi_buf_tx_u16;
+	} else if (config.bpw <= 32) {
+		mxc_spi->rx = mxc_spi_buf_rx_u32;
+		mxc_spi->tx = mxc_spi_buf_tx_u32;
+	} else
+		BUG();
+
+	if (gpio >= 0)
+		gpio_set_value(gpio, cs);
+
+	return;
+}
+
+static void mxc_spi_push(struct mxc_spi_data *mxc_spi)
+{
+	while (mxc_spi->txfifo < 8) {
+		if (!mxc_spi->count)
+			break;
+		mxc_spi->tx(mxc_spi);
+		mxc_spi->txfifo++;
+	}
+
+	mxc_spi->trigger(mxc_spi);
+}
+
+static irqreturn_t mxc_spi_isr(int irq, void *dev_id)
+{
+	struct mxc_spi_data *mxc_spi = dev_id;
+
+	while (mxc_spi->rx_available(mxc_spi)) {
+		mxc_spi->rx(mxc_spi);
+		mxc_spi->txfifo--;
+	}
+
+	if (mxc_spi->count) {
+		mxc_spi_push(mxc_spi);
+		return IRQ_HANDLED;
+	}
+
+	if (mxc_spi->txfifo) {
+		/* No data left to push, but still waiting for rx data,
+		 * enable receive data available interrupt.
+		 */
+		mxc_spi->intctrl(mxc_spi, MXC_INT_RR);
+		return IRQ_HANDLED;
+	}
+
+	mxc_spi->intctrl(mxc_spi, 0);
+	complete(&mxc_spi->xfer_done);
+
+	return IRQ_HANDLED;
+}
+
+static int mxc_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+	struct mxc_spi_config config;
+
+	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
+	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
+	config.mode = spi->mode;
+
+	mxc_spi->config(mxc_spi, &config);
+
+	return 0;
+}
+
+static int mxc_spi_transfer(struct spi_device *spi,
+				struct spi_transfer *transfer)
+{
+	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+
+	mxc_spi->tx_buf = transfer->tx_buf;
+	mxc_spi->rx_buf = transfer->rx_buf;
+	mxc_spi->count = transfer->len;
+	mxc_spi->txfifo = 0;
+
+	init_completion(&mxc_spi->xfer_done);
+
+	mxc_spi_push(mxc_spi);
+
+	mxc_spi->intctrl(mxc_spi, MXC_INT_TE);
+
+	wait_for_completion(&mxc_spi->xfer_done);
+
+	return transfer->len;
+}
+
+static int mxc_spi_setup(struct spi_device *spi)
+{
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
+
+	mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+
+	return 0;
+}
+
+static void mxc_spi_cleanup(struct spi_device *spi)
+{
+}
+
+static int __init mxc_spi_probe(struct platform_device *pdev)
+{
+	struct spi_imx_master *mxc_platform_info;
+	struct spi_master *master;
+	struct mxc_spi_data *mxc_spi;
+	struct resource *res;
+	int i, ret;
+
+	mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
+	if (!mxc_platform_info) {
+		dev_err(&pdev->dev, "can't get the platform data\n");
+		return -EINVAL;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = mxc_platform_info->num_chipselect;
+
+	mxc_spi = spi_master_get_devdata(master);
+	mxc_spi->bitbang.master = spi_master_get(master);
+	mxc_spi->chipselect = mxc_platform_info->chipselect;
+
+	for (i = 0; i < master->num_chipselect; i++) {
+		if (mxc_spi->chipselect[i] < 0)
+			continue;
+		ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME);
+		if (ret) {
+			i--;
+			while (i > 0)
+				if (mxc_spi->chipselect[i] >= 0)
+					gpio_free(mxc_spi->chipselect[i--]);
+			dev_err(&pdev->dev, "can't get cs gpios");
+			goto out_master_put;
+		}
+		gpio_direction_output(mxc_spi->chipselect[i], 1);
+	}
+
+	mxc_spi->bitbang.chipselect = mxc_spi_chipselect;
+	mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer;
+	mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer;
+	mxc_spi->bitbang.master->setup = mxc_spi_setup;
+	mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup;
+
+	init_completion(&mxc_spi->xfer_done);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get platform resource\n");
+		ret = -ENOMEM;
+		goto out_gpio_free;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		ret = -EBUSY;
+		goto out_gpio_free;
+	}
+
+	mxc_spi->base = ioremap(res->start, resource_size(res));
+	if (!mxc_spi->base) {
+		ret = -EINVAL;
+		goto out_release_mem;
+	}
+
+	mxc_spi->irq = platform_get_irq(pdev, 0);
+	if (!mxc_spi->irq) {
+		ret = -EINVAL;
+		goto out_iounmap;
+	}
+
+	ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret);
+		goto out_iounmap;
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35()) {
+		mxc_spi->intctrl = mx31_intctrl;
+		mxc_spi->config = mx31_config;
+		mxc_spi->trigger = mx31_trigger;
+		mxc_spi->rx_available = mx31_rx_available;
+	} else  if (cpu_is_mx27() || cpu_is_mx21()) {
+		mxc_spi->intctrl = mx27_intctrl;
+		mxc_spi->config = mx27_config;
+		mxc_spi->trigger = mx27_trigger;
+		mxc_spi->rx_available = mx27_rx_available;
+	} else if (cpu_is_mx1()) {
+		mxc_spi->intctrl = mx1_intctrl;
+		mxc_spi->config = mx1_config;
+		mxc_spi->trigger = mx1_trigger;
+		mxc_spi->rx_available = mx1_rx_available;
+	} else
+		BUG();
+
+	mxc_spi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mxc_spi->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		ret = PTR_ERR(mxc_spi->clk);
+		goto out_free_irq;
+	}
+
+	clk_enable(mxc_spi->clk);
+	mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk);
+
+	if (!cpu_is_mx31() || !cpu_is_mx35())
+		writel(1, mxc_spi->base + MXC_RESET);
+
+	mxc_spi->intctrl(mxc_spi, 0);
+
+	ret = spi_bitbang_start(&mxc_spi->bitbang);
+	if (ret) {
+		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+		goto out_clk_put;
+	}
+
+	dev_info(&pdev->dev, "probed\n");
+
+	return ret;
+
+out_clk_put:
+	clk_disable(mxc_spi->clk);
+	clk_put(mxc_spi->clk);
+out_free_irq:
+	free_irq(mxc_spi->irq, mxc_spi);
+out_iounmap:
+	iounmap(mxc_spi->base);
+out_release_mem:
+	release_mem_region(res->start, resource_size(res));
+out_gpio_free:
+	for (i = 0; i < master->num_chipselect; i++)
+		if (mxc_spi->chipselect[i] >= 0)
+			gpio_free(mxc_spi->chipselect[i]);
+out_master_put:
+	spi_master_put(master);
+	kfree(master);
+	platform_set_drvdata(pdev, NULL);
+	return ret;
+}
+
+static int __exit mxc_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master);
+	int i;
+
+	spi_bitbang_stop(&mxc_spi->bitbang);
+
+	writel(0, mxc_spi->base + MXC_CSPICTRL);
+	clk_disable(mxc_spi->clk);
+	clk_put(mxc_spi->clk);
+	free_irq(mxc_spi->irq, mxc_spi);
+	iounmap(mxc_spi->base);
+
+	for (i = 0; i < master->num_chipselect; i++)
+		if (mxc_spi->chipselect[i] >= 0)
+			gpio_free(mxc_spi->chipselect[i]);
+
+	spi_master_put(master);
+
+	release_mem_region(res->start, resource_size(res));
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver mxc_spi_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+	.probe = mxc_spi_probe,
+	.remove = __exit_p(mxc_spi_remove),
+};
+
+static int __init mxc_spi_init(void)
+{
+	return platform_driver_register(&mxc_spi_driver);
+}
+
+static void __exit mxc_spi_exit(void)
+{
+	platform_driver_unregister(&mxc_spi_driver);
+}
+
+module_init(mxc_spi_init);
+module_exit(mxc_spi_exit);
+
+MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
-- 
1.6.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ