[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4A3F07C0.9030001@bluewatersys.com>
Date: Mon, 22 Jun 2009 16:25:36 +1200
From: Ryan Mallon <ryan@...ewatersys.com>
To: Baruch Siach <baruch@...s.co.il>
CC: David Woodhouse <dwmw2@...radead.org>,
linux-mtd@...ts.infradead.org,
spi-devel-general@...ts.sourceforge.net, mike@...roidmicros.com,
linux kernel <linux-kernel@...r.kernel.org>
Subject: Re: [spi-devel-general] [PATCH] SST25L (non JEDEC) SPI Flash driver
Baruch Siach wrote:
> Hi Ryan,
>
> On Mon, Jun 22, 2009 at 03:58:51PM +1200, Ryan Mallon wrote:
>> +static int sst25l_erase_block(struct sst25l_flash *flash, u32 offset)
>> +{
>> + u8 command[4];
>> + int err;
>> +
>> + err = sst25l_write_enable(flash, 1);
>
> Is this enable/disable strictly required for each write/erase? Can't we just
> enable write once?
The datasheet says that prior to any write/erase instruction the write
enable instruction must be sent.
~Ryan
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon Unit 5, Amuri Park
Phone: +64 3 3779127 404 Barbadoes St
Fax: +64 3 3779135 PO Box 13 889
Email: ryan@...ewatersys.com Christchurch, 8013
Web: http://www.bluewatersys.com New Zealand
Freecall Australia 1800 148 751 USA 1800 261 2934
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists