Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007 Command line: root=/dev/cciss/c0d0p1 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523856) 1 entries of 3200 used Entering add_active_range(0, 1048576, 4718591) 2 entries of 3200 used end_pfn_map = 4718591 DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A07 2 Ò 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A07 2 Ò 162E) ACPI: DSDT 7FE50900, 42FF (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE500C0, 0040 ACPI: SPCR 7FE50100, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG 7FE50180, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE501C0, 0038 (r1 HP A07 2 Ò 162E) ACPI: SPMI 7FE50200, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC 7FE50240, 0106 (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 01A0 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: PXM 2 -> APIC 4 -> Node 2 SRAT: PXM 2 -> APIC 5 -> Node 2 SRAT: PXM 3 -> APIC 6 -> Node 3 SRAT: PXM 3 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 0, 159) 1 entries of 3200 used Entering add_active_range(0, 256, 523856) 1 entries of 3200 used SRAT: Node 0 PXM 0 0-180000000 Entering add_active_range(0, 0, 159) 2 entries of 3200 used Entering add_active_range(0, 256, 523856) 2 entries of 3200 used Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used SRAT: Node 1 PXM 1 180000000-280000000 Entering add_active_range(1, 1572864, 2621440) 3 entries of 3200 used SRAT: Node 2 PXM 2 280000000-380000000 Entering add_active_range(2, 2621440, 3670016) 4 entries of 3200 used SRAT: Node 3 PXM 3 380000000-480000000 Entering add_active_range(3, 3670016, 4718591) 5 entries of 3200 used NUMA: Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 Bootmem setup node 1 0000000180000000-0000000280000000 Bootmem setup node 2 0000000280000000-0000000380000000 Bootmem setup node 3 0000000380000000-000000047ffff000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 4718591 early_node_map[6] active PFN ranges 0: 0 -> 159 0: 256 -> 523856 0: 1048576 -> 1572864 1: 1572864 -> 2621440 2: 2621440 -> 3670016 3: 3670016 -> 4718591 On node 0 totalpages: 1048047 DMA zone: 56 pages used for memmap DMA zone: 1034 pages reserved DMA zone: 2909 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048576 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 On node 2 totalpages: 1048576 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 On node 3 totalpages: 1048575 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14335 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) Processor #5 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7cf0000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xf7cf0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xf7fd0000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xf7fd0000, GSI 24-30 ACPI: IOAPIC (id[0x0a] address[0xf7fe0000] gsi_base[31]) IOAPIC[2]: apic_id 10, address 0xf7fe0000, GSI 31-37 ACPI: IOAPIC (id[0x0b] address[0xf7ff0000] gsi_base[38]) IOAPIC[3]: apic_id 11, address 0xf7ff0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. ACPI: NMI_SRC (dfl dfl global_irq 28) ACPI: NMI_SRC (dfl dfl global_irq 35) Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007fe50000 - 000000007fe58000 swsusp: Registered nosave memory region: 000000007fe58000 - 0000000080000000 swsusp: Registered nosave memory region: 0000000080000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000 swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000 swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000 swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 37896 bytes of per cpu data Built 4 zonelists. Total pages: 4128229 Kernel command line: root=/dev/cciss/c0d0p1 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2812.961 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ bde2000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 16438940k/18874364k available (2008k kernel code, 336156k reserved, 945k data, 296k init) Calibrating delay using timer specific routine.. 5628.99 BogoMIPS (lpj=11257985) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12557870 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/8 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=11251900) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 2/8 APIC 0x4 Initializing CPU#2 Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=11251888) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/4 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 3/8 APIC 0x6 Initializing CPU#3 Calibrating delay using timer specific routine.. 5626.04 BogoMIPS (lpj=11252096) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/6 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 4/8 APIC 0x1 Initializing CPU#4 Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=11252170) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 5/8 APIC 0x3 Initializing CPU#5 Calibrating delay using timer specific routine.. 5626.16 BogoMIPS (lpj=11252324) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 6/8 APIC 0x5 Initializing CPU#6 Calibrating delay using timer specific routine.. 5626.18 BogoMIPS (lpj=11252370) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6/5 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=11251943) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7/7 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 Brought up 8 CPUs migration_cost=458,599 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at 80000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) PCI: Probing PCI hardware (bus 40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid IPI0001 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F13 pnp: ACPI device : hid PNP0A06 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0003 pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x700-0x73f has been reserved pnp: 00:01: iomem range 0x80000000-0x8fffffff has been reserved PCI: Bridge: 0000:00:09.0 IO window: 2000-3fff MEM window: f7d00000-f7efffff PREFETCH window: e8000000-efffffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:40:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:10.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: 90000000-900fffff PCI: Bridge: 0000:40:11.0 IO window: 4000-4fff MEM window: fdf00000-fdffffff PREFETCH window: 90100000-901fffff PCI: Setting latency timer of device 0000:40:0b.0 to 64 PCI: Setting latency timer of device 0000:40:0c.0 to 64 PCI: Setting latency timer of device 0000:40:0d.0 to 64 PCI: Setting latency timer of device 0000:40:0e.0 to 64 NET: Registered protocol family 2 Time: hpet clocksource has been installed. IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 2097152 (order: 13, 50331648 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 2097152 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7574k freed audit: initializing netlink socket (disabled) audit(1246055003.828:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found enabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:0e.0 Boot video device is 0000:01:03.0 pci 0000:01:04.4: HCRESET not completed yet! PCI: Found enabled HT MSI Mapping on 0000:40:0b.0 PCI: Found enabled HT MSI Mapping on 0000:40:0c.0 PCI: Found enabled HT MSI Mapping on 0000:40:0d.0 PCI: Found enabled HT MSI Mapping on 0000:40:0e.0 PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:40:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0b.0:pcie00] PCI: Setting latency timer of device 0000:40:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0c.0:pcie00] PCI: Setting latency timer of device 0000:40:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0d.0:pcie00] PCI: Setting latency timer of device 0000:40:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0e.0:pcie00] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:09' and the driver 'serial' 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:07' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 296k freed ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7cd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered SCSI subsystem initialized HP CISS Driver (v 3.6.14) NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 163 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007) ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31 eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 31, node addr 001cc4f094fa ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32 eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f8000000, IRQ 32, node addr 001cc4f094fc ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00003800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 860051248 block_size= 512 heads=255, sectors=32, cylinders=105399 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 blocks= 860051248 block_size= 512 heads=255, sectors=32, cylinders=105399 cciss/c0d1: unknown partition table ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7ce0000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected libata version 2.21 loaded. hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usb 2-1: new full speed USB device using uhci_hcd and address 2 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. usb 2-1: configuration #1 chosen from 1 choice kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 7 ports detected usb 3-3: new low speed USB device using ohci_hcd and address 2 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usb 3-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: HP Virtual Keyboard as /class/input/input0 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input1 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: Avocent HP 336047-B21 as /class/input/input2 input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3 input: Avocent HP 336047-B21 as /class/input/input3 input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver EXT3 FS on cciss/c0d0p1, internal journal 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ipmi message handler version 39.1 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7df0000, slave address 0x0, irq 16 Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k NET: Registered protocol family 15 Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007) bonding: MII link monitoring set to 100 ms bonding: bond0: Adding slave eth0. bonding: bond0: enslaving eth0 as a backup interface with a down link. bonding: bond0: Adding slave eth1. bonding: bond0: enslaving eth1 as a backup interface with a down link. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): bond0: link is not ready Initializing XFRM netlink socket