Message-Id: <20090703140633.7303.87265.sendpatchset@localhost.localdomain>
Date:	Fri, 03 Jul 2009 16:06:33 +0200
From:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To:	"Greg Kroah-Hartman" <gregkh@...e.de>
Cc:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
	linux-kernel@...r.kernel.org
Subject: [PATCH 05/22] Staging: rtl8192su: remove EEPROM_OLD_FORMAT_SUPPORT ifdefs

From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH staging] Staging: rtl8192su: remove EEPROM_OLD_FORMAT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
 drivers/staging/rtl8192su/Makefile      |    2 
 drivers/staging/rtl8192su/r8192S_hw.h   |   26 ----
 drivers/staging/rtl8192su/r8192S_phy.c  |    5 
 drivers/staging/rtl8192su/r8192U.h      |    6 
 drivers/staging/rtl8192su/r8192U_core.c |  197 --------------------------------
 5 files changed, 236 deletions(-)

Index: b/drivers/staging/rtl8192su/Makefile
===================================================================
--- a/drivers/staging/rtl8192su/Makefile
+++ b/drivers/staging/rtl8192su/Makefile
@@ -12,8 +12,6 @@ EXTRA_CFLAGS += -DRTL8190_Download_Firmw
 EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
 EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1
 
-#EXTRA_CFLAGS += -DEEPROM_OLD_FORMAT_SUPPORT
-
 #EXTRA_CFLAGS += -DUSB_RX_AGGREGATION_SUPPORT=0
 #EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0
 #EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0
Index: b/drivers/staging/rtl8192su/r8192S_hw.h
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_hw.h
+++ b/drivers/staging/rtl8192su/r8192S_hw.h
@@ -1282,17 +1282,11 @@ Default: 00b.
 #define 		EEPROM_Default_TxPower		0x1010
 #define		EEPROM_Default_HT2T_TxPwr		0x10
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-#define 		EEPROM_Default_TxPowerBase	0x0
-#define 		EEPROM_Default_ThermalMeter	0x12
-#define 		EEPROM_Default_PwDiff			0x4
-#else
 #define		EEPROM_Default_LegacyHTTxPowerDiff	0x3
 #define		EEPROM_Default_ThermalMeter		0x12
 #define		EEPROM_Default_AntTxPowerDiff		0x0
 #define		EEPROM_Default_TxPwDiff_CrystalCap	0x5
 #define		EEPROM_Default_TxPowerLevel		0x22
-#endif
 
 #define		EEPROM_CHANNEL_PLAN_FCC				0x0
 #define		EEPROM_CHANNEL_PLAN_IC				0x1
@@ -1330,25 +1324,6 @@ Default: 00b.
 
 
 	// <Roger_Notes> The followin are for different version of EEPROM contents purpose. 2008.11.22.
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-#define 		EEPROM_PwDiff					0x54 // Difference of gain index between legacy and high throughput OFDM.
-#define 		EEPROM_ThermalMeter			0x55 // Thermal meter default value.
-#define 		EEPROM_Reserved				0x56 // Reserved.
-#define 		EEPROM_CrystalCap				0x57 // Crystal Cap.
-#define 		EEPROM_TxPowerBase			0x58 // Tx Power of serving station.
-#define 		EEPROM_TxPwIndex_CCK_24G	0x59 // 0x59~0x66
-#define 		EEPROM_TxPwIndex_OFDM_24G	0x67 // 0x67~0x74
-#define 		EEPROM_TSSI_A					0x75 //TSSI value of path A.
-#define 		EEPROM_TSSI_B					0x76 //TSSI value of path B.
-#define 		EEPROM_TxPwTkMode			0x77 //Tx Power tracking mode.
-#define 		EEPROM_HT2T_CH1_A			0x78 //HT 2T path A channel 1 Power Index.
-#define 		EEPROM_HT2T_CH7_A			0x79 //HT 2T path A channel 7 Power Index.
-#define 		EEPROM_HT2T_CH13_A			0x7a //HT 2T path A channel 13 Power Index.
-#define 		EEPROM_HT2T_CH1_B			0x7b //HT 2T path B channel 1 Power Index.
-#define 		EEPROM_HT2T_CH7_B			0x7c //HT 2T path B channel 7 Power Index.
-#define 		EEPROM_HT2T_CH13_B			0x7d //HT 2T path B channel 13 Power Index.
-#define 		EEPROM_BoardType				0x7e //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
-#else
 #define 		EEPROM_BoardType				0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
 #define		EEPROM_TxPwIndex				0x55 //0x55-0x66, Tx Power index.
 #define 		EEPROM_PwDiff					0x67 // Difference of gain index between legacy and high throughput OFDM.
@@ -1366,7 +1341,6 @@ Default: 00b.
 #define 		EEPROM_TX_PWR_OFDM_DIFF		0x71// OFDM Tx Power Index Difference
 #define 		EEPROM_TX_PWR_BAND_EDGE	0x73// TX Power offset at band-edge channel
 #define 		TX_PWR_BAND_EDGE_CHK		0x79// Check if band-edge scheme is enabled
-#endif
 #define		EEPROM_Default_LegacyHTTxPowerDiff	0x3
 #define		EEPROM_USB_Default_OPTIONAL_FUNC	0x8
 #define		EEPROM_USB_Default_PHY_PARAM		0x0
Index: b/drivers/staging/rtl8192su/r8192S_phy.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -2639,10 +2639,6 @@ PHY_GetTxPowerLevel8192S(
 	//
 //	if(priv->epromtype == EPROM_93c46)
 	{
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-		powerlevel = priv->TxPowerLevelCCK[index];
-		powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[index];
-#else
 		//
 		// Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx
 		// Power must be calculated by the antenna diff.
@@ -2821,7 +2817,6 @@ PHY_GetTxPowerLevel8192S(
 
 		// Notify Tx power difference for B/C/D to A!!!
 		rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
-#endif
 	}
 
 	//
Index: b/drivers/staging/rtl8192su/r8192U.h
===================================================================
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -1662,11 +1662,6 @@ typedef struct r8192_priv
 	bool	bDmDisableProtect;
 	bool	bIgnoreDiffRateTxPowerOffset;
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-	u8  EEPROMTxPowerLevelCCK24G[14];		// CCK 2.4G channel 1~14
-	//u8  EEPROMTxPowerLevelOFDM24G[14];	// OFDM 2.4G channel 1~14
-	//u8  EEPROMTxPowerLevelOFDM5G[24];	// OFDM 5G
-#else
 	// For EEPROM TX Power Index like 8190 series
 	u8  EEPROMRfACCKChnl1TxPwLevel[3];	//RF-A CCK Tx Power Level at channel 7
 	u8  EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
@@ -1678,7 +1673,6 @@ typedef struct r8192_priv
 	u8  RfCckChnlAreaTxPwr[2][3];
 	u8  RfOfdmChnlAreaTxPwr1T[2][3];
 	u8  RfOfdmChnlAreaTxPwr2T[2][3];
-#endif
 
 	// Add For EEPROM Efuse switch and  Efuse Shadow map Setting
 	bool		EepromOrEfuse;
Index: b/drivers/staging/rtl8192su/r8192U_core.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -5056,26 +5056,6 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoL
 	priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
 
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-	for(i=0; i<6; i++)
-		{
-		priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
-		}
-
-		for(i=0; i<14; i++)
-		{
-		priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
-			priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
-		}
-
-	//
-	// Update HAL variables.
-	//
-	memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14);
-	memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14);
-	//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), priv->TxPowerLevelCCK, 14);
-	//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), priv->TxPowerLevelOFDM24G, 14);
-#else
 
 	for (rf_path = 0; rf_path < 2; rf_path++)
 	{
@@ -5125,7 +5105,6 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoL
 		//priv->RfTxPwrLevelOfdm1T[0][i] ,
 		//priv->RfTxPwrLevelOfdm2T[0][i] );
 		}
-#endif
 
 	//
 	// Update remained HAL variables.
@@ -5349,50 +5328,8 @@ static void rtl8192SU_ReadAdapterInfo819
 
 			RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType);
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-
-			//
-			// Buffer TxPwIdx(i.e., from offset 0x58~0x75, total 30Bytes)
-			//
-			if(bLoad_From_EEPOM)
-			{
-				for(i = 0; i < 30; i += 2)
-				{
-					tmpValue = eprom_read(dev, (u16) ((EEPROM_TxPowerBase+i)>>1));
-					*((u16 *)(&tmpBuffer[i])) = tmpValue;
-				}
-			}
-
-			//
-			// Update CCK, OFDM Tx Power Index from above buffer.
-			//
-			if(bLoad_From_EEPOM)
-			{
-				for(i=0; i<14; i++)
-				{
-					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)tmpBuffer[i+1];
-					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)tmpBuffer[i+15];
-				}
-
-			}
-			else
-			{
-				for(i=0; i<14; i++)
-				{
-					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
-					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
-				}
-			}
-
-			for(i=0; i<14; i++)
-			{
-				RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK24G[i]);
-				RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelOFDM24G[i]);
-			}
-#else
 			// Please add code in the section!!!!
 			// And merge tx power difference section.
-#endif
 
 			//
 			// Get TSSI value for each path.
@@ -5422,47 +5359,10 @@ static void rtl8192SU_ReadAdapterInfo819
 			RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n", priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
 			RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-			//
-			// Get HT 2T Path A and B Power Index.
-			//
-			if(bLoad_From_EEPOM)
-			{
-				for(i = 0; i < 6; i += 2)
-				{
-					tmpValue = eprom_read(dev, (u16) ((EEPROM_HT2T_CH1_A+i)>>1));
-					*((u16*)(&priv->EEPROMHT2T_TxPwr[i])) = tmpValue;
-				}
-			}
-			else
-			{ // Default setting for Empty EEPROM
-				for(i=0; i<6; i++)
-				{
-					priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
-				}
-			}
-
-			for(i=0; i<6; i++)
-			{
-				RT_TRACE(COMP_INIT, "EEPROMHT2T_TxPwr, Index %d = 0x%02x\n", i, priv->EEPROMHT2T_TxPwr[i]);
-			}
-#else
 
-#endif
 		}
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-		//
-		// Update HAL variables.
-		//
-		for(i=0; i<14; i++)
-		{
-			priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i];
-			priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i];
-		}
-#else
 
-#endif
 		priv->TxPowerDiff = priv->EEPROMPwDiff;
 		// Antenna B gain offset to antenna A, bit0~3
 		priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
@@ -5750,47 +5650,8 @@ rtl8192SU_ReadAdapterInfo8192SEFuse(stru
 
 		//if(pHalData->EEPROM_Def_Ver == 0)
 		{
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-			//
-			// Get CCK Tx Power Index.
-			//
-			if(!priv->AutoloadFailFlag)
-			{
-				ReadEFuse(dev, EEPROM_TxPwIndex_CCK_24G, 14, (unsigned char*)CCKTxPwr);
-				for(i=0; i<14; i++)
-				{
-					RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, CCKTxPwr[i]);
-					priv->EEPROMTxPowerLevelCCK24G[i] = CCKTxPwr[i];
-				}
-			}
-			else
-			{ // Default setting for Empty EEPROM
-				for(i=0; i<14; i++)
-					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
-			}
-
-			//
-			// Get OFDM Tx Power Index.
-			//
-			if(!priv->AutoloadFailFlag)
-			{
-				ReadEFuse(dev, EEPROM_TxPwIndex_OFDM_24G, 14, (unsigned char*)OFDMTxPwr);
-				for(i=0; i<14; i++)
-				{
-					RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, OFDMTxPwr[i]);
-					priv->EEPROMTxPowerLevelOFDM24G[i] = OFDMTxPwr[i];
-				}
-			}
-			else
-			{ // Default setting for Empty EEPROM
-				usValue = 0x10;
-				for(i=0; i<14; i++)
-					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)usValue;
-			}
-#else
 			// Please add code in the section!!!!
 			// And merge tx power difference section.
-#endif
 
 			//
 			// Get TSSI value for each path.
@@ -5853,18 +5714,7 @@ rtl8192SU_ReadAdapterInfo8192SEFuse(stru
 			}
 		}
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-		//
-		// Update HAL variables.
-		//
-		for(i=0; i<14; i++)
-		{
-			priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i];
-			priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i];
-		}
-#else
 
-#endif
 		priv->TxPowerDiff = priv->EEPROMPwDiff;
 		// Antenna B gain offset to antenna A, bit0~3
 		priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
@@ -6254,52 +6104,6 @@ rtl8192SU_ReadAdapterInfo8192SUsb(struct
 	RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
 
 
-#ifdef EEPROM_OLD_FORMAT_SUPPORT
-
-	//
-	// <Roger_Notes> The following settings are EFUSE version dependence.
-	// So we need to adjust reading offset.
-	// 2008.11.22.
-	//
-	{
-			//
-			// Get HT 2T Path A and B Power Index.
-			//
-			//if(!priv->AutoloadFailFlag)
-			{
-				for(i=0; i<6; i++)
-				{
-				priv->EEPROMHT2T_TxPwr[i] = *(u8 *)&hwinfo[EEPROM_HT2T_CH1_A+i];
-				}
-			}
-
-		//RT_PRINT_DATA(COMP_EFUSE, "HT2T TxPwr: \n"), pHalData->EEPROMHT2T_TxPwr, 6);
-
-		//
-		// Get CCK and OFDM Tx Power Index.
-		//
-		//if(!priv->AutoloadFailFlag)
-		{
-			for(i=0; i<14; i++)
-			{
-				priv->EEPROMTxPowerLevelCCK24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_CCK_24G+i];
-				priv->EEPROMTxPowerLevelOFDM24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_OFDM_24G+i];
-			}
-		}
-
-		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("CCK 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelCCK24G, 14);
-		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("OFDM 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelOFDM24G, 14);
-
-		//
-		// Update HAL variables.
-		//
-		memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14);
-		memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14);
-		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), pHalData->TxPowerLevelCCK, 14);
-		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), pHalData->TxPowerLevelOFDM24G, 14);
-
-	}
-#else // Support new version of EFUSE content, 2008.11.22.
 	{
 		//
 		// Buffer TxPwIdx(i.e., from offset 0x55~0x66, total 18Bytes)
@@ -6467,7 +6271,6 @@ rtl8192SU_ReadAdapterInfo8192SUsb(struct
 		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][0],
 		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][1]);
 	RT_TRACE((COMP_INIT&COMP_DBG), "Band-edge enable flag = %d\n", priv->TxPwrbandEdgeFlag);
-#endif
 
 	//
 	// Update remained HAL variables.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists