[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <200907040206.42940.jkrzyszt@tis.icnet.pl>
Date: Sat, 4 Jul 2009 02:06:42 +0200
From: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
To: Jonathan McDowell <noodles@...th.li>
Cc: Tony Lindgren <tony@...mide.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
linux-serial@...r.kernel.org,
linux-arm-kernel@...ts.arm.linux.org.uk,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] [RFC] OMAP1: AMS_DELTA: add modem support
This patch adds support for modem device found on Amstrad E3 (Delta) board.
Patch created against linux-2.6.31-rc1.
Based on earlier patch by Jonathan McDowell, available at
http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
---
Registering the modem platform device from a separate arch_initcall (and not from machine_init() callback) preserves serial console port
at ttyS0.
--- linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c.orig 2009-06-27 20:19:50.000000000 +0200
+++ linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c 2009-07-04 00:50:46.000000000 +0200
@@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -233,7 +236,39 @@ static void __init ams_delta_init(void)
omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+}
+
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+ {
+ .membase = (void *) AMS_DELTA_MODEM_VIRT,
+ .mapbase = AMS_DELTA_MODEM_PHYS,
+ .irq = OMAP_GPIO_IRQ(2),
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = BASE_BAUD * 16,
+ },
+ { },
+};
+
+static struct platform_device ams_delta_modem_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = ams_delta_modem_ports,
+ },
+};
+
+static int __init ams_delta_modem_init(void)
+{
+ set_irq_type(OMAP_GPIO_IRQ(2), IRQ_TYPE_EDGE_RISING);
+ ams_delta_latch2_write(
+ AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
+ AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+ return platform_device_register(&ams_delta_modem_device);
}
+arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists