Linux version 2.6.30.SMP.K8-64-test3-dirty (root@secdev) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #24 SMP Mon Jun 29 06:24:51 PDT 2009 Command line: auto BOOT_IMAGE=2.6.30 ro root=803 console=ttyS1,9600n8 console=tty1 quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000f9ff0000 (usable) BIOS-e820: 00000000f9ff0000 - 00000000f9fff000 (ACPI data) BIOS-e820: 00000000f9fff000 - 00000000fa000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000200000000 (usable) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x200000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FE00000000 write-back 1 base 00FA000000 mask FFFE000000 uncachable 2 base 00FC000000 mask FFFC000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000fa000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xf9ff0 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000f9ff0000 0000000000 - 00f9e00000 page 2M 00f9e00000 - 00f9ff0000 page 4k kernel direct mapping tables up to f9ff0000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000200000000 0100000000 - 0200000000 page 2M kernel direct mapping tables up to 200000000 @ 14000-1d000 ACPI: RSDP 00000000000f6d80 00014 (v00 ACPIAM) ACPI: RSDT 00000000f9ff0000 00038 (v01 A M I OEMRSDT 11000615 MSFT 00000097) ACPI: FACP 00000000f9ff0200 00081 (v01 A M I OEMFACP 11000615 MSFT 00000097) ACPI: DSDT 00000000f9ff0410 03751 (v01 0AAAA 0AAAA000 00000000 INTL 02002026) ACPI: FACS 00000000f9fff000 00040 ACPI: APIC 00000000f9ff0380 00084 (v01 A M I OEMAPIC 11000615 MSFT 00000097) ACPI: OEMB 00000000f9fff040 00041 (v01 A M I OEMBIOS 11000615 MSFT 00000097) ACPI: SRAT 00000000f9ff3b70 00110 (v01 A M I OEMSRAT 11000615 MSFT 00000097) ACPI: ASF! 00000000f9ff3c80 00086 (v01 AMIASF AMDSTRET 00000001 INTL 02002026) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 100000-fa000000 SRAT: Node 1 PXM 1 100000000-200000000 SRAT: Node 0 PXM 0 100000000-100000000 SRAT: Node 0 PXM 0 0-9fc00 NUMA: Allocated memnodemap from 18000 - 1c040 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000100000000 NODE_DATA [000000000001c040 - 000000000001e03f] bootmap [000000000001f000 - 000000000003efff] pages 20 (8 early reservations) ==> bootmem [0000000000 - 0100000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00009b8b64] TEXT DATA BSS ==> [0000200000 - 00009b8b64] #3 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] #4 [00009b9000 - 00009b9200] BRK ==> [00009b9000 - 00009b9200] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000018000] PGTABLE ==> [0000014000 - 0000018000] #7 [0000018000 - 000001c040] MEMNODEMAP ==> [0000018000 - 000001c040] Bootmem setup node 1 0000000100000000-0000000200000000 NODE_DATA [0000000100000000 - 0000000100001fff] bootmap [0000000100002000 - 0000000100021fff] pages 20 (8 early reservations) ==> bootmem [0100000000 - 0200000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0000200000 - 00009b8b64] TEXT DATA BSS #3 [000009c000 - 0000100000] BIOS reserved #4 [00009b9000 - 00009b9200] BRK #5 [0000010000 - 0000014000] PGTABLE #6 [0000014000 - 0000018000] PGTABLE #7 [0000018000 - 000001c040] MEMNODEMAP found SMP MP-table at [ffff8800000ff780] ff780 [ffffe20000000000-ffffe200037fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ffffe20003800000-ffffe20006ffffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 1 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00200000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000f9ff0 1: 0x00100000 -> 0x00200000 On node 0 totalpages: 1023870 DMA zone: 56 pages used for memmap DMA zone: 2091 pages reserved DMA zone: 1835 pages, LIFO batch:0 DMA32 zone: 13944 pages used for memmap DMA32 zone: 1005944 pages, LIFO batch:31 On node 1 totalpages: 1048576 Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 0, address 0xfebff000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 0, address 0xfebfe000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 32 Allocating PCI resources starting at fa800000 (gap: fa000000:5780000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Allocated 17 4k pages, static data 68832 bytes Built 2 zonelists in Node order, mobility grouping on. Total pages: 2042019 Policy zone: Normal Kernel command line: auto BOOT_IMAGE=2.6.30 ro root=803 console=ttyS1,9600n8 console=tty1 quiet Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2590.750 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS1] enabled Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 8101016k/8388608k available (4130k kernel code, 98824k absent, 188768k reserved, 1820k data, 404k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5181.50 BogoMIPS (lpj=10363000) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5182.52 BogoMIPS (lpj=10365057) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Dual Core AMD Opteron(tm) Processor 285 stepping 02 Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5182.50 BogoMIPS (lpj=10365007) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/0x2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Dual Core AMD Opteron(tm) Processor 285 stepping 02 Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5182.54 BogoMIPS (lpj=10365096) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/0x3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Dual Core AMD Opteron(tm) Processor 285 stepping 02 Brought up 4 CPUs Total of 4 processors activated (20729.08 BogoMIPS). net_namespace: 1352 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 7946.000 MB/sec xor: using function: generic_sse (7946.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000fa000000 aka 4000M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [fa000000, ffffffff] TOM2: 0000000200000000 aka 8192M bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [fa000000, ffffffff] bus: 00 index 3 mmio: [200000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:07.2: reg 10 io port: [0xcc00-0xcc1f] pci 0000:00:0a.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff] pci 0000:00:0b.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff] pci 0000:04:00.0: reg 10 32bit mmio: [0xfeafc000-0xfeafcfff] pci 0000:04:00.1: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff] pci 0000:04:04.0: reg 10 io port: [0xb400-0xb4ff] pci 0000:04:04.0: reg 14 64bit mmio: [0xfeaa0000-0xfeabffff] pci 0000:04:04.0: reg 1c 64bit mmio: [0xfea80000-0xfea9ffff] pci 0000:04:04.0: reg 30 32bit mmio: [0xfe400000-0xfe7fffff] pci 0000:04:04.0: supports D1 D2 pci 0000:04:05.0: reg 10 io port: [0xbc00-0xbc07] pci 0000:04:05.0: reg 14 io port: [0xb000-0xb003] pci 0000:04:05.0: reg 18 io port: [0xac00-0xac07] pci 0000:04:05.0: reg 1c io port: [0xa800-0xa803] pci 0000:04:05.0: reg 20 io port: [0xa400-0xa40f] pci 0000:04:05.0: reg 24 32bit mmio: [0xfeafe400-0xfeafe7ff] pci 0000:04:05.0: reg 30 32bit mmio: [0xfea00000-0xfea7ffff] pci 0000:04:05.0: supports D1 D2 pci 0000:04:06.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:04:06.0: reg 14 io port: [0xb800-0xb8ff] pci 0000:04:06.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff] pci 0000:04:06.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:04:06.0: supports D1 D2 pci 0000:04:08.0: reg 10 32bit mmio: [0xfeafb000-0xfeafbfff] pci 0000:04:08.0: reg 14 io port: [0xa000-0xa03f] pci 0000:04:08.0: reg 18 32bit mmio: [0xfe9e0000-0xfe9fffff] pci 0000:04:08.0: supports D1 D2 pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:08.0: PME# disabled pci 0000:00:06.0: bridge io port: [0x9000-0xbfff] pci 0000:00:06.0: bridge 32bit mmio: [0xfc000000-0xfeafffff] pci 0000:00:06.0: bridge 32bit mmio pref: [0xff500000-0xff5fffff] pci 0000:03:02.0: reg 10 io port: [0x8800-0x88ff] pci 0000:03:02.0: reg 14 64bit mmio: [0xfbfe0000-0xfbffffff] pci 0000:03:02.0: reg 1c 64bit mmio: [0xfbfc0000-0xfbfdffff] pci 0000:03:02.0: reg 30 32bit mmio: [0xfb800000-0xfbbfffff] pci 0000:03:02.0: supports D1 D2 pci 0000:03:03.0: reg 10 io port: [0x8400-0x84ff] pci 0000:03:03.0: reg 14 64bit mmio: [0xfbfa0000-0xfbfbffff] pci 0000:03:03.0: reg 1c 64bit mmio: [0xfbf80000-0xfbf9ffff] pci 0000:03:03.0: reg 30 32bit mmio: [0xfb400000-0xfb7fffff] pci 0000:03:03.0: supports D1 D2 pci 0000:03:09.0: reg 10 64bit mmio: [0xfbf50000-0xfbf5ffff] pci 0000:03:09.0: reg 30 32bit mmio: [0xfbf40000-0xfbf4ffff] pci 0000:03:09.0: PME# supported from D3hot D3cold pci 0000:03:09.0: PME# disabled pci 0000:03:09.1: reg 10 64bit mmio: [0xfbf70000-0xfbf7ffff] pci 0000:03:09.1: reg 30 32bit mmio: [0xfbf60000-0xfbf6ffff] pci 0000:03:09.1: PME# supported from D3hot D3cold pci 0000:03:09.1: PME# disabled pci 0000:00:0a.0: bridge io port: [0x8000-0x8fff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfae00000-0xfbffffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xff400000-0xff4fffff] pci 0000:01:01.0: reg 10 io port: [0x7800-0x78ff] pci 0000:01:01.0: reg 14 64bit mmio: [0xfade0000-0xfadfffff] pci 0000:01:01.0: reg 1c 64bit mmio: [0xfadc0000-0xfaddffff] pci 0000:01:01.0: reg 30 32bit mmio: [0xfa800000-0xfabfffff] pci 0000:01:01.0: supports D1 D2 pci 0000:00:0b.0: bridge io port: [0x6000-0x7fff] pci 0000:00:0b.0: bridge 32bit mmio: [0xfa400000-0xfadfffff] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xff200000-0xff3fffff] pci 0000:02:04.0: reg 10 64bit mmio: [0xfa4c0000-0xfa4dffff] pci 0000:02:04.0: reg 20 io port: [0x6800-0x683f] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:04.1: reg 10 64bit mmio: [0xfa4e0000-0xfa4fffff] pci 0000:02:04.1: reg 20 io port: [0x6c00-0x6c3f] pci 0000:02:04.1: PME# supported from D0 D3hot pci 0000:02:04.1: PME# disabled pci 0000:02:06.0: reg 10 64bit mmio: [0xfa480000-0xfa49ffff] pci 0000:02:06.0: reg 20 io port: [0x6000-0x603f] pci 0000:02:06.0: PME# supported from D0 D3hot pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: reg 10 64bit mmio: [0xfa4a0000-0xfa4bffff] pci 0000:02:06.1: reg 20 io port: [0x6400-0x643f] pci 0000:02:06.1: PME# supported from D0 D3hot pci 0000:02:06.1: PME# disabled pci 0000:01:03.0: bridge io port: [0x6000-0x6fff] pci 0000:01:03.0: bridge 32bit mmio: [0xfa400000-0xfa4fffff] pci 0000:01:03.0: bridge 64bit mmio pref: [0xff200000-0xff2fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. raid6: int64x1 2352 MB/s raid6: int64x2 3054 MB/s raid6: int64x4 2352 MB/s raid6: int64x8 2173 MB/s raid6: sse2x1 839 MB/s raid6: sse2x2 1514 MB/s raid6: sse2x4 2684 MB/s raid6: using algorithm sse2x4 (2684 MB/s) PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0a: ioport range 0x680-0x6ff has been reserved system 00:0a: ioport range 0x295-0x296 has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x10bf has been reserved system 00:0b: ioport range 0x10e0-0x10ff has been reserved system 00:0b: ioport range 0x10c0-0x10df has been reserved system 00:0b: ioport range 0xde00-0xde7f has been reserved system 00:0b: ioport range 0xde80-0xdeff has been reserved system 00:0d: ioport range 0xca0-0xcaf has been reserved system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved system 00:0d: iomem range 0xff780000-0xff7fffff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xc0000-0xdffff has been reserved system 00:0e: iomem range 0xe0000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0xf9ffffff could not be reserved pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 pci 0000:00:06.0: IO window: 0x9000-0xbfff pci 0000:00:06.0: MEM window: 0xfc000000-0xfeafffff pci 0000:00:06.0: PREFETCH window: 0x000000ff500000-0x000000ff5fffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0a.0: IO window: 0x8000-0x8fff pci 0000:00:0a.0: MEM window: 0xfae00000-0xfbffffff pci 0000:00:0a.0: PREFETCH window: 0x000000ff400000-0x000000ff4fffff pci 0000:01:03.0: PCI bridge, secondary bus 0000:02 pci 0000:01:03.0: IO window: 0x6000-0x6fff pci 0000:01:03.0: MEM window: 0xfa400000-0xfa4fffff pci 0000:01:03.0: PREFETCH window: 0x000000ff200000-0x000000ff2fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0b.0: IO window: 0x6000-0x7fff pci 0000:00:0b.0: MEM window: 0xfa400000-0xfadfffff pci 0000:00:0b.0: PREFETCH window: 0x000000ff200000-0x000000ff3fffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 io: [0x9000-0xbfff] pci_bus 0000:04: resource 1 mem: [0xfc000000-0xfeafffff] pci_bus 0000:04: resource 2 pref mem [0xff500000-0xff5fffff] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff] pci_bus 0000:03: resource 1 mem: [0xfae00000-0xfbffffff] pci_bus 0000:03: resource 2 pref mem [0xff400000-0xff4fffff] pci_bus 0000:01: resource 0 io: [0x6000-0x7fff] pci_bus 0000:01: resource 1 mem: [0xfa400000-0xfadfffff] pci_bus 0000:01: resource 2 pref mem [0xff200000-0xff3fffff] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff] pci_bus 0000:02: resource 1 mem: [0xfa400000-0xfa4fffff] pci_bus 0000:02: resource 2 pref mem [0xff200000-0xff2fffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 NTFS driver 2.1.29 [Flags: R/W]. SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 15822 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) async_tx: api initialized (sync-only) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered boot interrupts on PCI device 0x1022:0x746b already disabled pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled pci 0000:04:06.0: Boot video device pci 0000:04:08.0: Firmware left e100 interrupts enabled; disabling lp: driver loaded but no devices found Real Time Clock Driver v1.12b AMD768 RNG detected Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded nbd: registered device at major 43 Adaptec aacraid driver 1.1-5[2461]-ms QLogic Fibre Channel HBA Driver: 8.03.01-k1 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods sata_sil 0000:04:05.0: version 2.4 sata_sil 0000:04:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sata_sil 0000:04:05.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil scsi1 : sata_sil scsi2 : sata_sil scsi3 : sata_sil ata1: SATA max UDMA/100 mmio m1024@0xfeafe400 tf 0xfeafe480 irq 19 ata2: SATA max UDMA/100 mmio m1024@0xfeafe400 tf 0xfeafe4c0 irq 19 ata3: SATA max UDMA/100 mmio m1024@0xfeafe400 tf 0xfeafe680 irq 19 ata4: SATA max UDMA/100 mmio m1024@0xfeafe400 tf 0xfeafe6c0 irq 19 ata1: hard resetting link pata_amd 0000:00:07.1: version 0.4.1 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. ata5: soft resetting link e1000 0000:02:04.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 ata5.00: ATAPI: DV-W28EA, 1.0A, max UDMA/33 ata5.00: configured for UDMA/33 ata5: EH complete e1000: 0000:02:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:c1:a7:84 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:02:04.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29 ata1: SATA link down (SStatus 0 SControl 310) ata1: EH complete ata2: hard resetting link e1000: 0000:02:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:c1:a7:85 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:02:06.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 ata2: SATA link down (SStatus 0 SControl 310) ata2: EH complete ata3: hard resetting link e1000: 0000:02:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:c1:a7:86 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection e1000 0000:02:06.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31 ata3: SATA link down (SStatus 0 SControl 310) ata3: EH complete ata4: hard resetting link e1000: 0000:02:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:c1:a7:87 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:04:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e100 0000:04:08.0: PME# disabled e100: eth4: e100_probe: addr 0xfeafb000, irq 18, MAC addr 00:e0:81:4a:0e:b3 tg3.c:v3.98 (February 25, 2009) tg3 0000:03:09.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 tg3 0000:03:09.0: PME# disabled eth5: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4a:0e:8c eth5: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth5: dma_rwctrl[769f4000] dma_mask[64-bit] tg3 0000:03:09.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 tg3 0000:03:09.1: PME# disabled eth6: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4a:0e:8d eth6: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth6: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth6: dma_rwctrl[769f4000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 mptspi 0000:04:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mptbase: ioc0: Initiating bringup ata4: SATA link down (SStatus 0 SControl 310) ata4: EH complete scsi 4:0:0:0: CD-ROM TEAC DV-W28EA 1.0A PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg0 type 5 ata6: soft resetting link ata6: EH complete ioc0: LSI53C1030 C0: Capabilities={Initiator} scsi6 : ioc0: LSI53C1030 C0, FwRev=01030f00h, Ports=1, MaxQ=222, IRQ=16 mptspi 0000:03:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 C0: Capabilities={Initiator} scsi 6:0:0:0: Direct-Access LSILOGIC 1030 IM 1000 PQ: 0 ANSI: 2 scsi7 : ioc1: LSI53C1030 C0, FwRev=01033010h, Ports=1, MaxQ=222, IRQ=26 mptspi 0000:03:03.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 mptbase: ioc2: Initiating bringup ioc2: LSI53C1030 C0: Capabilities={Initiator} scsi8 : ioc2: LSI53C1030 C0, FwRev=01033010h, Ports=1, MaxQ=222, IRQ=27 mptspi 0000:01:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 mptbase: ioc3: Initiating bringup ioc3: LSI53C1030 C0: Capabilities={Initiator} scsi9 : ioc3: LSI53C1030 C0, FwRev=01030f00h, Ports=1, MaxQ=222, IRQ=29 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 Fusion MPT misc device (ioctl) driver 3.04.07 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller scsi: waiting for bus probes to complete ... scsi 6:1:0:0: Direct-Access FUJITSU MAU3036NP 0105 PQ: 0 ANSI: 3 mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 mptbase: ioc0: volume is now optimal, enabled, quiesced mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0 mptbase: ioc0: PhysDisk is now online, quiesced mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0 mptbase: ioc0: PhysDisk is now online, quiesced target6:1:0: Beginning Domain Validation target6:1:0: Ending Domain Validation mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 mptbase: ioc0: volume is now optimal, enabled mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0 mptbase: ioc0: PhysDisk is now online mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0 mptbase: ioc0: PhysDisk is now online target6:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 6:1:1:0: Direct-Access FUJITSU MAU3036NP 0105 PQ: 0 ANSI: 3 mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 mptbase: ioc0: volume is now optimal, enabled, quiesced mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0 mptbase: ioc0: PhysDisk is now online, quiesced mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0 mptbase: ioc0: PhysDisk is now online, quiesced target6:1:1: Beginning Domain Validation target6:1:1: Ending Domain Validation mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 mptbase: ioc0: volume is now optimal, enabled mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0 mptbase: ioc0: PhysDisk is now online mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0 mptbase: ioc0: PhysDisk is now online target6:1:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) sd 6:0:0:0: Attached scsi generic sg1 type 0 scsi 6:1:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sda] 71553024 512-byte hardware sectors: (36.6 GB/34.1 GiB) scsi 6:1:1:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sda] Write Protect is off sd 6:0:0:0: [sda] Mode Sense: 03 00 00 08 sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 6:0:0:0: [sda] Attached SCSI disk scsi 7:0:10:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target7:0:10: Beginning Domain Validation target7:0:10: Ending Domain Validation target7:0:10: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 7:0:10:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:10:7: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target7:0:11: Beginning Domain Validation target7:0:11: Ending Domain Validation target7:0:11: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 7:0:11:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 7:0:11:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 sd 7:0:10:0: Attached scsi generic sg4 type 0 sd 7:0:10:1: Attached scsi generic sg5 type 0 sd 7:0:10:0: [sdb] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:2: Attached scsi generic sg6 type 0 sd 7:0:10:1: [sdc] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:3: Attached scsi generic sg7 type 0 sd 7:0:10:0: [sdb] Write Protect is off sd 7:0:10:0: [sdb] Mode Sense: a7 00 10 08 sd 7:0:10:1: [sdc] Write Protect is off sd 7:0:10:1: [sdc] Mode Sense: a7 00 10 08 sd 7:0:10:4: Attached scsi generic sg8 type 0 sd 7:0:10:2: [sdd] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:5: Attached scsi generic sg9 type 0 sd 7:0:10:2: [sdd] Write Protect is off sd 7:0:10:2: [sdd] Mode Sense: a7 00 10 08 sd 7:0:10:6: Attached scsi generic sg10 type 0 sd 7:0:10:3: [sde] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:4: [sdf] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:7: Attached scsi generic sg11 type 0 sd 7:0:10:1: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:10:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:0: Attached scsi generic sg12 type 0 sd 7:0:10:3: [sde] Write Protect is off sd 7:0:10:3: [sde] Mode Sense: a7 00 10 08 sd 7:0:10:5: [sdg] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:4: [sdf] Write Protect is off sd 7:0:10:4: [sdf] Mode Sense: a7 00 10 08 sd 7:0:11:1: Attached scsi generic sg13 type 0 sd 7:0:10:6: [sdh] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:2: Attached scsi generic sg14 type 0 sd 7:0:10:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:3: Attached scsi generic sg15 type 0 sd 7:0:10:5: [sdg] Write Protect is off sd 7:0:10:5: [sdg] Mode Sense: a7 00 10 08 sd 7:0:10:7: [sdi] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:4: Attached scsi generic sg16 type 0 sd 7:0:10:6: [sdh] Write Protect is off sd 7:0:10:6: [sdh] Mode Sense: a7 00 10 08 sd 7:0:11:5: Attached scsi generic sg17 type 0 sd 7:0:11:0: [sdj] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:6: Attached scsi generic sg18 type 0 sd 7:0:10:3: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:10:4: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:10:7: [sdi] Write Protect is off sd 7:0:10:7: [sdi] Mode Sense: a7 00 10 08 sd 7:0:11:1: [sdk] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:2: [sdl] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:0: [sdj] Write Protect is off sd 7:0:11:0: [sdj] Mode Sense: a7 00 10 08 sd 7:0:11:3: [sdm] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:5: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:1: [sdk] Write Protect is off sd 7:0:11:1: [sdk] Mode Sense: a7 00 10 08 sd 7:0:11:4: [sdn] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:6: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:5: [sdo] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:11:2: [sdl] Write Protect is off sd 7:0:11:2: [sdl] Mode Sense: a7 00 10 08 sd 7:0:11:3: [sdm] Write Protect is off sd 7:0:11:3: [sdm] Mode Sense: a7 00 10 08 sd 7:0:11:6: [sdp] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 7:0:10:7: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:4: [sdn] Write Protect is off sd 7:0:11:4: [sdn] Mode Sense: a7 00 10 08 sdc:<5>sd 7:0:11:5: [sdo] Write Protect is off sd 7:0:11:5: [sdo] Mode Sense: a7 00 10 08 sdb:<5>sd 7:0:11:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:6: [sdp] Write Protect is off sd 7:0:11:6: [sdp] Mode Sense: a7 00 10 08 sd 7:0:11:1: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA sdc1 sd 7:0:10:1: [sdc] Attached SCSI disk sd 7:0:11:2: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA sdb1 sdd:<5>sd 7:0:11:3: [sdm] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:10:0: [sdb] Attached SCSI disk sd 7:0:11:4: [sdn] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:11:5: [sdo] Write cache: enabled, read cache: enabled, supports DPO and FUA sdd1 sde:<5>sd 7:0:11:6: [sdp] Write cache: enabled, read cache: enabled, supports DPO and FUA sdf:<5>sd 7:0:10:2: [sdd] Attached SCSI disk sde1 sdf1 sd 7:0:10:3: [sde] Attached SCSI disk sdg:<5>sd 7:0:10:4: [sdf] Attached SCSI disk sdh: sdg1 sdi:<5>sd 7:0:10:5: [sdg] Attached SCSI disk sdh1 sd 7:0:10:6: [sdh] Attached SCSI disk sdj:<6> sdk: sdi1 sdl: sdj1 sd 7:0:10:7: [sdi] Attached SCSI disk sdm:<5>sd 7:0:11:0: [sdj] Attached SCSI disk sdk1 sdn:<6> sdo: sdl1 sdm1 sd 7:0:11:1: [sdk] Attached SCSI disk sdp:<5>sd 7:0:11:2: [sdl] Attached SCSI disk sd 7:0:11:3: [sdm] Attached SCSI disk sdn1 sdo1 sdp1 sd 7:0:11:4: [sdn] Attached SCSI disk sd 7:0:11:5: [sdo] Attached SCSI disk sd 7:0:11:6: [sdp] Attached SCSI disk scsi 8:0:12:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target8:0:12: Beginning Domain Validation target8:0:12: Ending Domain Validation target8:0:12: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 8:0:12:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:12:7: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target8:0:13: Beginning Domain Validation target8:0:13: Ending Domain Validation target8:0:13: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 8:0:13:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 8:0:13:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 sd 8:0:12:0: Attached scsi generic sg19 type 0 sd 8:0:12:1: Attached scsi generic sg20 type 0 sd 8:0:12:2: Attached scsi generic sg21 type 0 sd 8:0:12:0: [sdq] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:1: [sdr] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:3: Attached scsi generic sg22 type 0 sd 8:0:12:0: [sdq] Write Protect is off sd 8:0:12:0: [sdq] Mode Sense: a7 00 10 08 sd 8:0:12:4: Attached scsi generic sg23 type 0 sd 8:0:12:2: [sds] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:1: [sdr] Write Protect is off sd 8:0:12:1: [sdr] Mode Sense: a7 00 10 08 sd 8:0:12:5: Attached scsi generic sg24 type 0 sd 8:0:12:6: Attached scsi generic sg25 type 0 sd 8:0:12:3: [sdt] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:2: [sds] Write Protect is off sd 8:0:12:2: [sds] Mode Sense: a7 00 10 08 sd 8:0:12:7: Attached scsi generic sg26 type 0 sd 8:0:12:0: [sdq] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:12:4: [sdu] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:3: [sdt] Write Protect is off sd 8:0:12:3: [sdt] Mode Sense: a7 00 10 08 sd 8:0:13:0: Attached scsi generic sg27 type 0 sd 8:0:12:5: [sdv] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:13:1: Attached scsi generic sg28 type 0 sd 8:0:12:1: [sdr] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:12:4: [sdu] Write Protect is off sd 8:0:12:4: [sdu] Mode Sense: a7 00 10 08 sd 8:0:13:2: Attached scsi generic sg29 type 0 sd 8:0:12:6: [sdw] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:2: [sds] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:3: Attached scsi generic sg30 type 0 sd 8:0:12:7: [sdx] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:5: [sdv] Write Protect is off sd 8:0:12:5: [sdv] Mode Sense: a7 00 10 08 sd 8:0:13:4: Attached scsi generic sg31 type 0 sd 8:0:13:5: Attached scsi generic sg32 type 0 sd 8:0:12:6: [sdw] Write Protect is off sd 8:0:12:6: [sdw] Mode Sense: a7 00 10 08 sd 8:0:12:3: [sdt] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:0: [sdy] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:13:6: Attached scsi generic sg33 type 0 sd 8:0:12:7: [sdx] Write Protect is off sd 8:0:12:7: [sdx] Mode Sense: a7 00 10 08 sd 8:0:13:1: [sdz] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:4: [sdu] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:2: [sdaa] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:13:0: [sdy] Write Protect is off sd 8:0:13:0: [sdy] Mode Sense: a7 00 10 08 sd 8:0:13:3: [sdab] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:5: [sdv] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:1: [sdz] Write Protect is off sd 8:0:13:1: [sdz] Mode Sense: a7 00 10 08 sd 8:0:13:4: [sdac] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:13:5: [sdad] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:12:6: [sdw] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:2: [sdaa] Write Protect is off sd 8:0:13:2: [sdaa] Mode Sense: a7 00 10 08 sd 8:0:13:6: [sdae] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 8:0:13:3: [sdab] Write Protect is off sd 8:0:13:3: [sdab] Mode Sense: a7 00 10 08 sd 8:0:12:7: [sdx] Write cache: enabled, read cache: enabled, supports DPO and FUA sdq:<5>sd 8:0:13:4: [sdac] Write Protect is off sd 8:0:13:4: [sdac] Mode Sense: a7 00 10 08 sd 8:0:13:5: [sdad] Write Protect is off sd 8:0:13:5: [sdad] Mode Sense: a7 00 10 08 sd 8:0:13:0: [sdy] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:6: [sdae] Write Protect is off sd 8:0:13:6: [sdae] Mode Sense: a7 00 10 08 sd 8:0:13:1: [sdz] Write cache: enabled, read cache: enabled, supports DPO and FUA sdq1 sdr:<5>sd 8:0:12:0: [sdq] Attached SCSI disk sd 8:0:13:2: [sdaa] Write cache: enabled, read cache: enabled, supports DPO and FUA sds:<5>sd 8:0:13:3: [sdab] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:13:4: [sdac] Write cache: enabled, read cache: enabled, supports DPO and FUA sdr1 sd 8:0:13:5: [sdad] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:12:1: [sdr] Attached SCSI disk sds1 sdt:<5>sd 8:0:13:6: [sdae] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 8:0:12:2: [sds] Attached SCSI disk sdu: sdt1 sdv:<5>sd 8:0:12:3: [sdt] Attached SCSI disk sdu1 sdw:<5>sd 8:0:12:4: [sdu] Attached SCSI disk sdv1 sdx:<5>sd 8:0:12:5: [sdv] Attached SCSI disk sdw1 sdy:<5>sd 8:0:12:6: [sdw] Attached SCSI disk sdx1 sdz:<5>sd 8:0:12:7: [sdx] Attached SCSI disk sdaa: sdy1 sdab: sdz1 sd 8:0:13:0: [sdy] Attached SCSI disk sdac:<6> sdad: sdaa1 sd 8:0:13:1: [sdz] Attached SCSI disk sdae: sdab1 sd 8:0:13:2: [sdaa] Attached SCSI disk sdac1 sdad1 sd 8:0:13:3: [sdab] Attached SCSI disk sdae1 sd 8:0:13:4: [sdac] Attached SCSI disk sd 8:0:13:5: [sdad] Attached SCSI disk sd 8:0:13:6: [sdae] Attached SCSI disk scsi 9:0:14:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target9:0:14: Beginning Domain Validation target9:0:14: Ending Domain Validation target9:0:14: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 9:0:14:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:14:7: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:0: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 target9:0:15: Beginning Domain Validation target9:0:15: Ending Domain Validation target9:0:15: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) scsi 9:0:15:1: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:2: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:3: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:4: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:5: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 scsi 9:0:15:6: Direct-Access Promise VTrak M500p 0202 PQ: 0 ANSI: 4 sd 9:0:14:0: Attached scsi generic sg34 type 0 sd 9:0:14:1: Attached scsi generic sg35 type 0 sd 9:0:14:0: [sdaf] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:2: Attached scsi generic sg36 type 0 sd 9:0:14:3: Attached scsi generic sg37 type 0 sd 9:0:14:0: [sdaf] Write Protect is off sd 9:0:14:0: [sdaf] Mode Sense: a7 00 10 08 sd 9:0:14:1: [sdag] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:4: Attached scsi generic sg38 type 0 sd 9:0:14:1: [sdag] Write Protect is off sd 9:0:14:1: [sdag] Mode Sense: a7 00 10 08 sd 9:0:14:5: Attached scsi generic sg39 type 0 sd 9:0:14:2: [sdah] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:3: [sdai] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:6: Attached scsi generic sg40 type 0 sd 9:0:14:0: [sdaf] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:14:7: Attached scsi generic sg41 type 0 sd 9:0:14:2: [sdah] Write Protect is off sd 9:0:14:2: [sdah] Mode Sense: a7 00 10 08 sd 9:0:14:4: [sdaj] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:0: Attached scsi generic sg42 type 0 sd 9:0:14:3: [sdai] Write Protect is off sd 9:0:14:3: [sdai] Mode Sense: a7 00 10 08 sd 9:0:14:1: [sdag] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:14:5: [sdak] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:1: Attached scsi generic sg43 type 0 sd 9:0:15:2: Attached scsi generic sg44 type 0 sd 9:0:14:4: [sdaj] Write Protect is off sd 9:0:14:4: [sdaj] Mode Sense: a7 00 10 08 sd 9:0:15:3: Attached scsi generic sg45 type 0 sd 9:0:14:6: [sdal] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:4: Attached scsi generic sg46 type 0 sd 9:0:15:5: Attached scsi generic sg47 type 0 sd 9:0:14:5: [sdak] Write Protect is off sd 9:0:14:5: [sdak] Mode Sense: a7 00 10 08 sd 9:0:14:2: [sdah] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:14:7: [sdam] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:6: Attached scsi generic sg48 type 0 sd 9:0:15:0: [sdan] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:6: [sdal] Write Protect is off sd 9:0:14:6: [sdal] Mode Sense: a7 00 10 08 sd 9:0:14:3: [sdai] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:1: [sdao] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:2: [sdap] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:7: [sdam] Write Protect is off sd 9:0:14:7: [sdam] Mode Sense: a7 00 10 08 sd 9:0:14:4: [sdaj] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:0: [sdan] Write Protect is off sd 9:0:15:0: [sdan] Mode Sense: a7 00 10 08 sd 9:0:15:3: [sdaq] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:4: [sdar] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:1: [sdao] Write Protect is off sd 9:0:15:1: [sdao] Mode Sense: a7 00 10 08 sd 9:0:15:5: [sdas] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:14:5: [sdak] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:2: [sdap] Write Protect is off sd 9:0:15:2: [sdap] Mode Sense: a7 00 10 08 sd 9:0:15:6: [sdat] 1464843520 512-byte hardware sectors: (749 GB/698 GiB) sd 9:0:15:3: [sdaq] Write Protect is off sd 9:0:15:3: [sdaq] Mode Sense: a7 00 10 08 sd 9:0:14:6: [sdal] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:4: [sdar] Write Protect is off sd 9:0:15:4: [sdar] Mode Sense: a7 00 10 08 sdaf:<5>sd 9:0:15:5: [sdas] Write Protect is off sd 9:0:15:5: [sdas] Mode Sense: a7 00 10 08 sd 9:0:14:7: [sdam] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:6: [sdat] Write Protect is off sd 9:0:15:6: [sdat] Mode Sense: a7 00 10 08 sd 9:0:15:0: [sdan] Write cache: enabled, read cache: enabled, supports DPO and FUA sdaf1 sd 9:0:15:1: [sdao] Write cache: enabled, read cache: enabled, supports DPO and FUA sdag:<5>sd 9:0:14:0: [sdaf] Attached SCSI disk sd 9:0:15:2: [sdap] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:3: [sdaq] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:4: [sdar] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 9:0:15:5: [sdas] Write cache: enabled, read cache: enabled, supports DPO and FUA sdag1 sdah:<5>sd 9:0:14:1: [sdag] Attached SCSI disk sd 9:0:15:6: [sdat] Write cache: enabled, read cache: enabled, supports DPO and FUA sdai: sdah1 sd 9:0:14:2: [sdah] Attached SCSI disk sdaj: sdai1 sd 9:0:14:3: [sdai] Attached SCSI disk sdak: sdaj1 sdal:<5>sd 9:0:14:4: [sdaj] Attached SCSI disk sdak1 sdam:<5>sd 9:0:14:5: [sdak] Attached SCSI disk sdan: sdal1 sdao:<5>sd 9:0:14:6: [sdal] Attached SCSI disk sdap: sdam1 sdan1 sdaq:<6> sdar: sdao1 sd 9:0:14:7: [sdam] Attached SCSI disk sdas:<5>sd 9:0:15:0: [sdan] Attached SCSI disk sdap1 sdat:<5>sd 9:0:15:1: [sdao] Attached SCSI disk sdaq1 sdar1 sdas1<5>sd 9:0:15:2: [sdap] Attached SCSI disk sd 9:0:15:3: [sdaq] Attached SCSI disk sdat1 sd 9:0:15:4: [sdar] Attached SCSI disk sd 9:0:15:5: [sdas] Attached SCSI disk sd 9:0:15:6: [sdat] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: invalid raid superblock magic on sdc1 md: sdc1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdb1 md: sdb1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdd1 md: sdd1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sde1 md: sde1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdf1 md: sdf1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdg1 md: sdg1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdh1 md: sdh1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdi1 md: sdi1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdj1 md: sdj1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdk1 md: sdk1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdl1 md: sdl1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdm1 md: sdm1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdn1 md: sdn1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdo1 md: sdo1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdp1 md: sdp1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdq1 md: sdq1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdr1 md: sdr1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sds1 md: sds1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdt1 md: sdt1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdu1 md: sdu1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdv1 md: sdv1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdw1 md: sdw1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdx1 md: sdx1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdy1 md: sdy1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdz1 md: sdz1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdaa1 md: sdaa1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdab1 md: sdab1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdac1 md: sdac1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdad1 md: sdad1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdae1 md: sdae1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdaf1 md: sdaf1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdag1 md: sdag1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdah1 md: sdah1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdai1 md: sdai1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdaj1 md: sdaj1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdak1 md: sdak1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdal1 md: sdal1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdam1 md: sdam1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdan1 md: sdan1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdao1 md: sdao1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdap1 md: sdap1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdaq1 md: sdaq1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdar1 md: sdar1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdas1 md: sdas1 does not have a valid v0.90 superblock, not importing! md: invalid raid superblock magic on sdat1 md: sdat1 does not have a valid v0.90 superblock, not importing! md: Scanned 45 and added 0 devices. md: autorun ... md: ... autorun DONE. UDF-fs: No partition found (1) XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 404k freed Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k md: md0 stopped. md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind XFS mounting filesystem sda4 Ending clean XFS mount for filesystem: sda4 XFS: SB read failed e100 0000:04:08.0: firmware: using built-in firmware e100/d102e_ucode.bin e100: eth4 NIC Link is Up 100 Mbps Full Duplex device bond0 entered promiscuous mode e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX device eth1 entered promiscuous mode bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. bonding: bond0: enslaving eth1 as an active interface with an up link. device eth2 entered promiscuous mode bonding: bond0: Warning: failed to get speed and duplex from eth2, assumed to be 100Mb/sec and Full. bonding: bond0: enslaving eth2 as an active interface with an up link. e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX md: md0 stopped. md: unbind md: export_rdev(sdd) md: unbind md: export_rdev(sdc) md: unbind md: export_rdev(sdb) md: unbind md: export_rdev(sdat) md: unbind md: export_rdev(sdas) md: unbind md: export_rdev(sdar) md: unbind md: export_rdev(sdaq) md: unbind md: export_rdev(sdap) md: unbind md: export_rdev(sdao) md: unbind md: export_rdev(sdan) md: unbind md: export_rdev(sdam) md: unbind md: export_rdev(sdal) md: unbind md: export_rdev(sdak) md: unbind md: export_rdev(sdaj) md: unbind md: export_rdev(sdai) md: unbind md: export_rdev(sdah) md: unbind md: export_rdev(sdag) md: unbind md: export_rdev(sdaf) md: unbind md: export_rdev(sdae) md: unbind md: export_rdev(sdad) md: unbind md: export_rdev(sdac) md: unbind md: export_rdev(sdab) md: unbind md: export_rdev(sdaa) md: unbind md: export_rdev(sdz) md: unbind md: export_rdev(sdy) md: unbind md: export_rdev(sdx) md: unbind md: export_rdev(sdw) md: unbind md: export_rdev(sdv) md: unbind md: export_rdev(sdu) md: unbind md: export_rdev(sdt) md: unbind md: export_rdev(sds) md: unbind md: export_rdev(sdr) md: unbind md: export_rdev(sdq) md: unbind md: export_rdev(sdp) md: unbind md: export_rdev(sdo) md: unbind md: export_rdev(sdn) md: unbind md: export_rdev(sdm) md: unbind md: export_rdev(sdl) md: unbind md: export_rdev(sdk) md: unbind md: export_rdev(sdj) md: unbind md: export_rdev(sdi) md: unbind md: export_rdev(sdh) md: unbind md: export_rdev(sdg) md: unbind md: export_rdev(sdf) md: unbind md: export_rdev(sde) md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind