Message-Id: <200907102350.47124.henrik@austad.us>
Date:	Fri, 10 Jul 2009 23:50:46 +0200
From:	Henrik Austad <henrik@...tad.us>
To:	LKML <linux-kernel@...r.kernel.org>
Cc:	Ingo Molnar <mingo@...e.hu>,
	Peter Zijlstra <a.p.zijlstra@...llo.nl>,
	Bill Huey <billh@...ppy.monkey.org>,
	Linux RT <linux-rt-users@...r.kernel.org>
Subject: RFC for a new Scheduling policy/class in the Linux-kernel

Hi all!

This is a proposal for a global [1], deadline driven scheduler for
real-time tasks in the Linux kernel. I thought I should send out an RFC to
gather some feedback instead of wildy hack away at it.

This proposed scheduler is a modified MLLF (modified Least Laxity First)
called Earliest Failure First (EFF) as it orders tasks according to when
they will miss their deadlines, not when the actual deadline is.

== Motivation and background ==

Deadlines will give the developer greater flexibility and expressiveness
when creating real-time applications. Compared to a priority scheme,
this simplifies the process considerably as it removes the need for
calculating the priorities off-line in order to find the priority-map
that will order the tasks in the correct order. Yet another important
aspect with deadlines instead of priorities, are systems too dynamic to
analyze (a large application with 100s of processes/threads or a system
running more than one rt-application).

* In very large systems, it becomes very difficult to find the correct
  set of priorities, even with sophisticated tools, and a slight change
  will require a re-calculation of all priorities.

* In very dynamic systems, it can be impossible to analyze the system
  off-line, reducing the calculated priorities to best-effort only

* If more than one application run at the same time, this become even
  worse.


As a final point, a schedule of tasks with their priorities, is in
almost all scenarios, a result of all deadlines for all tasks. This also
goes for non-rt tasks, even though the concept of deadlines are a bit
more fuzzy here. The problem is that this mapping is a one-way function,
--you cannot determine the deadlines from a set of priorities.

The problem is, how to implement this efficiently in a priority-oriented
kernel, and more importantly, how to extend this to multi-core
systems. For single-core systems, EDF is optimal and can accept tasks up
to 100% utilization and still guarantee that all deadlines are
met. However, on multi-core, this breaks down and the utilization bound
must be set very low if any guarantee should be given (known as "Dhall's
effect").

== Related Work ==

Recently, I've been working away on a pfair-based scheduler (PD^2 to be
exact), but this failed for several reasons [2]. The most prominent being
the sensitivity for timer inaccuracies and very frequent task
preemption. pfair has several good qualities, as it reduces jitter,
scales to many cores and achieves high sustained utilization. However,
the benefits do not outweigh the added overhead and strict requirements
placed on the timer infrastructure.

This latter point is what haunts EDF on multi-core platforms. A global
EDF-US[1/2] cannot exceed (m+1)/2, standard EDF is much
worse. Partitioned can reach higher limits, but is very susceptible to
the bin-packing heuristics. Going fully partitioned will also introduce
other issues like the need for load balancing and more complex deadline
inheritance logic. However, one clear benefit with EDF, is that it will
minimize the number of task-switches, clearly something desirable.

== Proposed algorithm ==

So, with this in mind, my motivation was to find a way to extend the a
deadline driver scheduler scheduler to battle Dhall's effect. This can
be done if you look at time in a more general sense than just
deadlines. What you must do, is look at how the expected computation
time needed by a task with respect to the tasks deadline compares to
other tasks.

=== Notation ===

- Take a set of tasks with corresponding attributes.  This set and their
  attributes are called the schedule, 'S' and contains *all* tasks for
  the given scheduling class (i.e. all EFF-tasks).

- Consider a multi-core system with 'm' processors.

- Let the i'th task in the schedule be denoted tau_i. [3]

- Each task will run in intervals, each 'round' is called a job. A task
  consists of an infinite sequence of jobs. The k'th job of tau_i is
  called tau_{i,k}

- Each task has a set of (relative) attributes supplied when the task is
  inserted into the scheduler (passed via syscall)
  * Period T_i
  * Deadline D_i
  * WCET C_i

- Each job (tau_{i,k}) has absolute attributes (computed from the relative
  tasks-attributes coupled with physical time).
  * Release-time r_{i,k}
  * Deadline d_{i,k}
  * Allocated time so for a job, C_a(t, tau_{i,k})
    When C_a equals WCET, the jobs budget is exhausted and it should
    start a new cycle. This is tested (see below) by the scheduler.
  * Remaining time for the job, C_r(t, tau_{i,nk})

- The acceptance function for EFF screens new tasks on their expected
  utilization. Depending on the mode and implementation, it can be based
  on the period, or on the deadline. The latter will cause firmer
  restraints, but may lead to wasted resources.

	U = C_i / T_i		For SRT (bounded deadline tardiness)
	U = C_i / D_i		For HRT

- A relative measure, time to failure, ttf, indicates how much time is
  left before a job must be scheduled to run in order to avoid a
  deadline-miss. This will decrease as time progresses and the job is
  not granted CPU time. For tasks currently running on a CPU, this value
  will be constant.

	Take a job with a WCET of 10ms, it has been allowed to run for 4
	ms so far. The deadline is 8 ms away. Then the job must be
	scheduled to run within the next 4 ms, otherwise it will not be
	able to finish in time.

- An absolute value, time of failure (tof) can also be computed in a
  static manner. For tasks not running on a CPU, the allocated time is
  static. That means you can take the absolute deadline, subtract the
  allocated time and you have the absolute point in time when a given
  job will fail to meet its deadline.

=== Outline of scheduler ===

Store tasks in 2 queues. One of size m, containing all the tasks
currently running on the CPUs (queue R). The other will hold all
currently active tasks waiting to execute (queue W).

queue R is sorted based on ttf (time to failure, the relative time left
until a task will miss it's deadline). As the tasks approaches the
absolute time of failure at the same rate C_a increases, ttf is
constant. R is only a 'map' of tasks to the CPUs. Position 0 in R
(i.e. smallest ttf) does not result in CPU#0, as the position->CPU will
be quite fluent.

queue W is sorted based on absolute time of failure (tof). Since this is
a fixed point in time, and the tasks in W are not running (C_a is
unchanged), this value is constant.

When a task is scheduled to run, a timer is set at the point in time
where it has exhausted it's budget (t_now + WCET - C_a). This is to
ensure that a runaway task does not grab the CPU.

When a new task arrives, it is handled according the following rules:
- The system has one or more CPUs not running EFF-tasks. Pick any of the
  free CPUs and assign the new job there. Set a timer to

- All CPUs are busy, the new task has greater time to failure than the
  head of W. The task is inserted into W at the appropriate place.

- All CPUs are busy and the new task has smaller time to failure than
  the head of W. The new task is compared to the last task in Q. If time
  to failure is larger than the task at the tail, it is added to the
  head of W.

- If all CPUs are busy, and time to failure is smaller than the tail of
  Q, the new task is a candidate for insertion. At this point the tasks
  must be compared to see if picking one or the other will cause a
  deadline-miss. If both will miss the deadline if the other is
  scheduled, keep the existing running and place the new at the head of
  W (as you will have a deadline-miss anyway unless the the task is
  picked up by another CPU soon).

- A task running on a CPU with ttf=0 should *never* be preempted with
  another task. If all tasks in R have ttf=0, and a newly arrived task
  has ttf=0, a deadline-miss is inevitable and switching tasks will only
  waste resources.

When a task in R finish (or is stopped due to the timer-limit), it is
removed from R, and the head of W is added to R, inserted at the
appropriate place.

It has been some discussion lately (in particular on #linux-rt) about
the bandwidth inheritance (BWI) and proxy execution protocol (PEP). It
should be possible to extend EFF to handle both. As a side note, if
anyone has some good information about PEP, I'd like a copy :)

Based on this, I think the utilization can be set as high as M
(i.e. full utilization of all CPUs), but the jitter can probably be
quite bad, so for jitter-sensitive tasks, a short period/deadline should
be used.

There are still some issues left to solve, for instance how to best
handle sporadic tasks, and whether or not deadline-miss should be allow,
or just 'bounded deadline tardiness'. Either way, EFF should be able to
handle it. Then, there are problems concerning blocking of tasks. One
solution would be BWI or PEP, but I have not had the time to read
properly through those, but from what I've gathered a combination of BWI
and PEP looks promising (anyone with good info about BWI and PEP - feel
free to share! (-: ).



	Henrik


1) Before you freeze at 'global' and get all caught up on "This won't
   ever scale to X", or "He will be haunted by Y" - I do not want to
   extend a global algorithm to 2000 cores. I would like to scale to a
   single *chip* and then we can worry about 2-way and 4-way systems
   later. For the record, I've donned my asbestos suit anyway.

2) http://austad.us/kernel/thesis_henrikau.pdf

3) Anyone want to include LaTeX-notation into an email-rfc?



-- 
 -> henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists