Linux version 2.6.31-rc2-bi (chris@laptop) (gcc version 4.3.4 20090621 (prerelease) (GCC) ) #233 PREEMPT Mon Jul 13 07:17:51 BST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable) BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x1ffe2 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 0FEDA0000 mask FFFFE0000 write-through 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001ffe2000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001ffe2000 page 4k kernel direct mapping tables up to 1ffe2000 @ 7000-c000 ACPI: RSDP 000fde50 00014 (v00 DELL ) ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D20811 ASL 00000061) ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D20811 ASL 00000061) ACPI: DSDT fffe4000 0317A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 1ffff800 00040 511MB LOWMEM available. mapped low ram: 0 - 1ffe2000 low ram: 0 - 1ffe2000 node 0 low ram: 00000000 - 1ffe2000 node 0 bootmap 00001000 - 00005000 (6 early reservations) ==> bootmem [0000000000 - 001ffe2000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00013ebfc4] TEXT DATA BSS ==> [0001000000 - 00013ebfc4] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [00013ec000 - 00013f2198] BRK ==> [00013ec000 - 00013f2198] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001ffe2 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001ffe2 On node 0 totalpages: 130945 free_area_init_node: node 0, pgdat c136da20, node_mem_map c13f3000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125954 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 Local APIC disabled by BIOS -- you can enable it with "lapic" APIC: disable apic facility nr_irqs_gsi: 16 Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921 Kernel command line: root=/dev/hda7 ro noirda PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 515172k/524168k available (2558k kernel code, 8560k reserved, 990k data, 272k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) vmalloc : 0xe07e2000 - 0xfffa2000 ( 503 MB) lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB) .init : 0xc1379000 - 0xc13bd000 ( 272 kB) .data : 0xc127f8e9 - 0xc13773a8 ( 990 kB) .text : 0xc1000000 - 0xc127f8e9 (2558 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:288 CPU 0 irqstacks, hard=c1370000 soft=c1371000 Fast TSC calibration using PIT Detected 996.590 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.18 BogoMIPS (lpj=3986360) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K mce: CPU supports 5 MCE banks Disabling lock debugging due to kernel taint CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ACPI: setting ELCR to 0200 (from 0800) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using PIC for interrupt routing ACPI: Power Resource [PADA] (on) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf] pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff] pci 0000:00:1f.6: reg 14 io port: [0xdc00-0xdc7f] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] pci 0000:02:00.0: reg 10 io port: [0xec80-0xecff] pci 0000:02:00.0: reg 14 32bit mmio: [0xf8fffc00-0xf8fffc7f] pci 0000:02:00.0: reg 30 32bit mmio: [0xf9000000-0xf901ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.1: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xffff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) SCSI subsystem initialized PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:04: io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling pnp: PnP ACPI: found 18 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved system 00:00: iomem range 0xfff80000-0xffffffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0x880-0x8bf has been reserved system 00:03: ioport range 0x8c0-0x8df has been reserved system 00:03: ioport range 0x8e0-0x8ff has been reserved system 00:09: ioport range 0x900-0x91f has been reserved system 00:09: ioport range 0x3f0-0x3f1 has been reserved system 00:10: ioport range 0xbf40-0xbf5f has been reserved system 00:10: ioport range 0xbf20-0xbf3f has been reserved system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff pci 0000:02:01.0: PREFETCH window: 0x20000000-0x23ffffff pci 0000:02:01.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:01.1: IO window: 0x00e800-0x00e8ff pci 0000:02:01.1: IO window: 0x00f000-0x00f0ff pci 0000:02:01.1: PREFETCH window: 0x24000000-0x27ffffff pci 0000:02:01.1: MEM window: 0x2c000000-0x2fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xe000-0xffff pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 pci 0000:02:01.1: enabling device (0000 -> 0003) pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xffff] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x27ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff] pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff] pci_bus 0000:03: resource 3 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:07: resource 0 io: [0xe800-0xe8ff] pci_bus 0000:07: resource 1 io: [0xf000-0xf0ff] pci_bus 0000:07: resource 2 pref mem [0x24000000-0x27ffffff] pci_bus 0000:07: resource 3 mem: [0x2c000000-0x2fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 msgmni has been set to 1006 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 Switched to NOHz mode on CPU #0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (35 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 830M Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 serial 0000:00:1f.6: PCI INT B disabled Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02) pci 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 pci 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7 ide1: BM-DMA at 0xbfa8-0xbfaf Probing IDE interface ide0... ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) hda: SAMSUNG HM160HC, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Platform driver 'pcspkr' needs updating - please use dev_pm_ops input: PC Speaker as /devices/platform/pcspkr/input/input3 cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 Intel ICH 0000:00:1f.5: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 Clocksource tsc unstable (delta = -290658918 ns) intel8x0_measure_ac97_clock: measured 55205 usecs (2654 samples) intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801CA-ICH3 with CS4205 at irq 5 TCP cubic registered NET: Registered protocol family 15 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 3:7. Freeing unused kernel memory: 272k freed EXT3 FS on hda7, internal journal usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc2-bi uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Platform driver 'floppy' needs updating - please use dev_pm_ops Floppy drive(s): fd0 is 1.44M parport_pc 00:0f: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] FDC 0 is a post-1991 82077 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. 0000:02:00.0: 3Com PCI 3c905C Tornado at e08eac00. usb 1-1: new low speed USB device using uhci_hcd and address 2 NET: Registered protocol family 23 Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252 smsc_ircc_present: can't get sir_base of 0x2f8 Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252 smsc_ircc_present: can't get sir_base of 0x2f8 yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:00e3] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64 usb 1-1: New USB device found, idVendor=046d, idProduct=c016 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Optical USB Mouse usb 1-1: Manufacturer: Logitech usb 1-1: configuration #1 chosen from 1 choice yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11 yenta_cardbus 0000:02:01.0: Socket status: 30000020 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean. yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:00e3] yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64 Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11 yenta_cardbus 0000:02:01.1: Socket status: 30000020 yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean. yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287 pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input6 generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff] cfg80211: Calling CRDA to update world regulatory domain pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:07:00.0: supports D1 D2 pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.0: PME# disabled pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:07:00.1: supports D1 D2 pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.1: PME# disabled pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:07:00.2: supports D1 D2 pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.2: PME# disabled ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002) ehci_hcd 0000:07:00.2: PCI INT C -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:07:00.2: EHCI Host Controller ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:07:00.2: irq 11, io mem 0x2c002000 ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc2-bi ehci_hcd usb usb2: SerialNumber: 0000:07:00.2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected rt61pci 0000:03:00.0: enabling device (0000 -> 0002) rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 rt61pci 0000:03:00.0: setting latency timer to 64 phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80 phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287 pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) phy0: Selected rate control algorithm 'minstrel' Registered led device: rt61pci-phy0::radio Registered led device: rt61pci-phy0::assoc phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'. rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. NET: Registered protocol family 17 phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. wlan0: authenticate with AP 00:1f:33:80:09:44 wlan0: authenticated wlan0: associate with AP 00:1f:33:80:09:44 wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1) wlan0: associated phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. cfg80211: Calling CRDA for country: GB cfg80211: Regulatory domain changed to country: GB (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2 platform microcode: firmware: requesting intel-ucode/06-0b-04 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. IBM TrackPoint firmware: 0x0b, buttons: 2/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 Adding 1048568k swap on /swapfile. Priority:-1 extents:316 across:4686700k wlan0: deauthenticated (Reason: 1) phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. wlan0: direct probe to AP 00:1f:33:80:09:44 try 1 wlan0: direct probe to AP 00:1f:33:80:09:44 try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1f:33:80:09:44 wlan0: authenticated wlan0: associate with AP 00:1f:33:80:09:44 wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1) wlan0: associated ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8190 buckets, 32760 max) NET: Unregistered protocol family 23 parport_pc 00:0f: disabled 3c59x 0000:02:00.0: PCI INT A disabled wlan0: deauthenticated (Reason: 1) phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. wlan0: direct probe to AP 00:1f:33:80:09:44 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1f:33:80:09:44 wlan0: authenticated wlan0: associate with AP 00:1f:33:80:09:44 wlan0: RX ReassocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1) wlan0: associated pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode pci 0000:01:00.0: putting AGP V2 device into 2x mode resource map sanity check conflict: 0xfcff0000 0xfd06ffff 0xfcff0000 0xfcffffff 0000:01:00.0 ------------[ cut here ]------------ WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x2aa/0x2c0() Hardware name: Latitude C610 Info: mapping multiple BARs. Your kernel is fine. Modules linked in: radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables af_packet arc4 ecb rt61pci crc_itu_t ehci_hcd rt2x00pci rt2x00lib led_class input_polldev mac80211 cfg80211 eeprom_93cx6 usbhid yenta_socket rsrc_nonstatic psmouse pcmcia_core floppy uhci_hcd usbcore [last unloaded: 3c59x] Pid: 1227, comm: X Tainted: G M 2.6.31-rc2-bi #233 Call Trace: [] ? __ioremap_caller+0x2aa/0x2c0 [] ? __ioremap_caller+0x2aa/0x2c0 [] ? warn_slowpath_common+0x6f/0xd0 [] ? __ioremap_caller+0x2aa/0x2c0 [] ? warn_slowpath_fmt+0x2b/0x30 [] ? __ioremap_caller+0x2aa/0x2c0 [] ? generic_file_buffered_write+0xfb/0x330 [] ? ioremap_nocache+0x14/0x20 [] ? drm_addmap_core+0x655/0x790 [] ? drm_addmap_core+0x655/0x790 [] ? __generic_file_aio_write_nolock+0x248/0x540 [] ? drm_addmap_ioctl+0x47/0x90 [] ? drm_ioctl+0x138/0x320 [] ? drm_addmap_ioctl+0x0/0x90 [] ? ext3_file_write+0x30/0xc0 [] ? do_sync_write+0xcd/0x110 [] ? vfs_ioctl+0x7f/0x90 [] ? do_vfs_ioctl+0x73/0x630 [] ? vfs_write+0xf8/0x130 [] ? sys_ioctl+0x3d/0x70 [] ? sysenter_do_call+0x12/0x26 ---[ end trace 250e88637fe242af ]--- [drm] Setting GART location based on old memory map [drm] Loading R100 Microcode [drm] writeback test succeeded in 1 usecs