| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5A47E75E594F054BAF48C5E4FC4B92AB0305D662B5@dbde02.ent.ti.com>
Date: Tue, 14 Jul 2009 16:25:16 +0530
From: "Gadiyar, Anand" <gadiyar@...com>
To: Jiri Kosina <jkosina@...e.cz>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 2/2] trivial: fix typo "to to" in multiple files
From: Anand Gadiyar <gadiyar@...com>
trivial: fix typo "to to" in multiple files
Signed-off-by: Anand Gadiyar <gadiyar@...com>
---
v2: Rebased on current Linus' tree (commit 6847e154e3)
Documentation/hwmon/pc87427 | 2 +-
Documentation/networking/regulatory.txt | 2 +-
Documentation/scsi/scsi_fc_transport.txt | 2 +-
arch/ia64/ia32/sys_ia32.c | 2 +-
arch/um/include/shared/ptrace_user.h | 2 +-
drivers/char/agp/uninorth-agp.c | 2 +-
drivers/gpu/drm/mga/mga_state.c | 4 ++--
drivers/lguest/page_tables.c | 2 +-
drivers/media/video/gspca/m5602/m5602_core.c | 2 +-
drivers/mmc/host/mxcmmc.c | 2 +-
drivers/mtd/maps/ixp2000.c | 2 +-
drivers/mtd/ubi/eba.c | 2 +-
drivers/mtd/ubi/ubi.h | 2 +-
drivers/net/bonding/bond_3ad.c | 2 +-
drivers/net/e1000/e1000_hw.c | 2 +-
drivers/net/wireless/zd1211rw/zd_chip.c | 2 +-
drivers/scsi/megaraid/megaraid_sas.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 4 ++--
drivers/staging/rt2860/rtmp.h | 2 +-
drivers/usb/serial/cypress_m8.h | 2 +-
drivers/usb/serial/io_edgeport.c | 2 +-
drivers/usb/serial/kl5kusb105.c | 2 +-
fs/ext4/inode.c | 2 +-
fs/gfs2/rgrp.c | 2 +-
fs/ntfs/layout.h | 2 +-
include/acpi/actypes.h | 2 +-
include/acpi/platform/acgcc.h | 2 +-
include/rdma/ib_cm.h | 2 +-
kernel/tracepoint.c | 2 +-
lib/zlib_deflate/deflate.c | 4 ++--
net/rxrpc/ar-call.c | 2 +-
net/sched/sch_hfsc.c | 2 +-
32 files changed, 35 insertions(+), 35 deletions(-)
Index: linux-2.6/Documentation/hwmon/pc87427
===================================================================
--- linux-2.6.orig/Documentation/hwmon/pc87427
+++ linux-2.6/Documentation/hwmon/pc87427
@@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-b
signal. Speeds down to 83 RPM can be measured.
An alarm is triggered if the rotation speed drops below a programmable
-limit. Another alarm is triggered if the speed is too low to to be measured
+limit. Another alarm is triggered if the speed is too low to be measured
(including stalled or missing fan).
Index: linux-2.6/Documentation/networking/regulatory.txt
===================================================================
--- linux-2.6.orig/Documentation/networking/regulatory.txt
+++ linux-2.6/Documentation/networking/regulatory.txt
@@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2
This example comes from the zd1211rw device driver. You can start
by having a mapping of your device's EEPROM country/regulatory
-domain value to to a specific alpha2 as follows:
+domain value to a specific alpha2 as follows:
static struct zd_reg_alpha2_map reg_alpha2_map[] = {
{ ZD_REGDOMAIN_FCC, "US" },
Index: linux-2.6/Documentation/scsi/scsi_fc_transport.txt
===================================================================
--- linux-2.6.orig/Documentation/scsi/scsi_fc_transport.txt
+++ linux-2.6/Documentation/scsi/scsi_fc_transport.txt
@@ -378,7 +378,7 @@ Vport Disable/Enable:
int vport_disable(struct fc_vport *vport, bool disable)
where:
- vport: Is vport to to be enabled or disabled
+ vport: Is vport to be enabled or disabled
disable: If "true", the vport is to be disabled.
If "false", the vport is to be enabled.
Index: linux-2.6/arch/ia64/ia32/sys_ia32.c
===================================================================
--- linux-2.6.orig/arch/ia64/ia32/sys_ia32.c
+++ linux-2.6/arch/ia64/ia32/sys_ia32.c
@@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int r
case PT_CS:
if (value != __USER_CS)
printk(KERN_ERR
- "ia32.putreg: attempt to to set invalid segment register %d = %x\n",
+ "ia32.putreg: attempt to set invalid segment register %d = %x\n",
regno, value);
break;
default:
Index: linux-2.6/arch/um/include/shared/ptrace_user.h
===================================================================
--- linux-2.6.orig/arch/um/include/shared/ptrace_user.h
+++ linux-2.6/arch/um/include/shared/ptrace_user.h
@@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsi
* recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
* We also want to be able to build the kernel on 2.4, which doesn't
* have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
- * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS.
+ * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
*
* On architectures, that start to support PTRACE_O_TRACESYSGOOD on
* linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't
Index: linux-2.6/drivers/char/agp/uninorth-agp.c
===================================================================
--- linux-2.6.orig/drivers/char/agp/uninorth-agp.c
+++ linux-2.6/drivers/char/agp/uninorth-agp.c
@@ -271,7 +271,7 @@ static void uninorth_agp_enable(struct a
if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
/*
- * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
+ * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
* 2.2 and 2.3, Darwin do so.
*/
if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)
Index: linux-2.6/drivers/gpu/drm/mga/mga_state.c
===================================================================
--- linux-2.6.orig/drivers/gpu/drm/mga/mga_state.c
+++ linux-2.6/drivers/gpu/drm/mga/mga_state.c
@@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pip
MGA_WR34, 0x00000000,
MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff);
- /* Padding required to to hardware bug.
+ /* Padding required due to hardware bug.
*/
DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff,
@@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pip
MGA_WR52, MGA_G400_WR_MAGIC, /* tex1 width */
MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height */
- /* Padding required to to hardware bug */
+ /* Padding required due to hardware bug */
DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff,
Index: linux-2.6/drivers/lguest/page_tables.c
===================================================================
--- linux-2.6.orig/drivers/lguest/page_tables.c
+++ linux-2.6/drivers/lguest/page_tables.c
@@ -780,7 +780,7 @@ void guest_set_pte(struct lg_cpu *cpu,
* tells us they've changed. When the Guest tries to use the new entry it will
* fault and demand_page() will fix it up.
*
- * So with that in mind here's our code to to update a (top-level) PGD entry:
+ * So with that in mind here's our code to update a (top-level) PGD entry:
*/
void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
{
Index: linux-2.6/drivers/media/video/gspca/m5602/m5602_core.c
===================================================================
--- linux-2.6.orig/drivers/media/video/gspca/m5602/m5602_core.c
+++ linux-2.6/drivers/media/video/gspca/m5602/m5602_core.c
@@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, con
return (err < 0) ? err : 0;
}
-/* Writes a byte to to the m5602 */
+/* Writes a byte to the m5602 */
int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
{
int err;
Index: linux-2.6/drivers/mmc/host/mxcmmc.c
===================================================================
--- linux-2.6.orig/drivers/mmc/host/mxcmmc.c
+++ linux-2.6/drivers/mmc/host/mxcmmc.c
@@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmc
}
/* For the DMA case the DMA engine handles the data transfer
- * automatically. For non DMA we have to to it ourselves.
+ * automatically. For non DMA we have to do it ourselves.
* Don't do it in interrupt context though.
*/
if (!mxcmci_use_dma(host) && host->data)
Index: linux-2.6/drivers/mtd/maps/ixp2000.c
===================================================================
--- linux-2.6.orig/drivers/mtd/maps/ixp2000.c
+++ linux-2.6/drivers/mtd/maps/ixp2000.c
@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct pl
info->map.bankwidth = 1;
/*
- * map_priv_2 is used to store a ptr to to the bank_setup routine
+ * map_priv_2 is used to store a ptr to the bank_setup routine
*/
info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
Index: linux-2.6/drivers/mtd/ubi/eba.c
===================================================================
--- linux-2.6.orig/drivers/mtd/ubi/eba.c
+++ linux-2.6/drivers/mtd/ubi/eba.c
@@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *
}
/*
- * Now we have got to calculate how much data we have to to copy. In
+ * Now we have got to calculate how much data we have to copy. In
* case of a static volume it is fairly easy - the VID header contains
* the data size. In case of a dynamic volume it is more difficult - we
* have to read the contents, cut 0xFF bytes from the end and copy only
Index: linux-2.6/drivers/mtd/ubi/ubi.h
===================================================================
--- linux-2.6.orig/drivers/mtd/ubi/ubi.h
+++ linux-2.6/drivers/mtd/ubi/ubi.h
@@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_d
/*
* ubi_rb_for_each_entry - walk an RB-tree.
- * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @rb: a pointer to type 'struct rb_node' to use as a loop counter
* @pos: a pointer to RB-tree entry type to use as a loop counter
* @root: RB-tree's root
* @member: the name of the 'struct rb_node' within the RB-tree entry
Index: linux-2.6/drivers/net/bonding/bond_3ad.c
===================================================================
--- linux-2.6.orig/drivers/net/bonding/bond_3ad.c
+++ linux-2.6/drivers/net/bonding/bond_3ad.c
@@ -1982,7 +1982,7 @@ void bond_3ad_unbind_slave(struct slave
// find new aggregator for the related port(s)
new_aggregator = __get_first_agg(port);
for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
- // if the new aggregator is empty, or it connected to to our port only
+ // if the new aggregator is empty, or it is connected to our port only
if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
break;
}
Index: linux-2.6/drivers/net/e1000/e1000_hw.c
===================================================================
--- linux-2.6.orig/drivers/net/e1000/e1000_hw.c
+++ linux-2.6/drivers/net/e1000/e1000_hw.c
@@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw
/* If TBI compatibility is was previously off, turn it on. For
* compatibility with a TBI link partner, we will store bad
* packets. Some frames have an additional byte on the end and
- * will look like CRC errors to to the hardware.
+ * will look like CRC errors to the hardware.
*/
if (!hw->tbi_compatibility_on) {
hw->tbi_compatibility_on = true;
Index: linux-2.6/drivers/net/wireless/zd1211rw/zd_chip.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/zd1211rw/zd_chip.c
+++ linux-2.6/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -368,7 +368,7 @@ error:
return r;
}
-/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and
+/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and
* CR_MAC_ADDR_P2 must be overwritten
*/
int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr)
Index: linux-2.6/drivers/scsi/megaraid/megaraid_sas.c
===================================================================
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c
+++ linux-2.6/drivers/scsi/megaraid/megaraid_sas.c
@@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instan
* megasas_build_ldio - Prepares IOs to logical devices
* @instance: Adapter soft state
* @scp: SCSI command
- * @cmd: Command to to be prepared
+ * @cmd: Command to be prepared
*
* Frames (and accompanying SGLs) for regular SCSI IOs use this function.
*/
Index: linux-2.6/drivers/scsi/qla4xxx/ql4_os.c
===================================================================
--- linux-2.6.orig/drivers/scsi/qla4xxx/ql4_os.c
+++ linux-2.6/drivers/scsi/qla4xxx/ql4_os.c
@@ -1406,7 +1406,7 @@ static void qla4xxx_slave_destroy(struct
/**
* qla4xxx_del_from_active_array - returns an active srb
* @ha: Pointer to host adapter structure.
- * @index: index into to the active_array
+ * @index: index into the active_array
*
* This routine removes and returns the srb at the specified index
**/
@@ -1484,7 +1484,7 @@ static int qla4xxx_wait_for_hba_online(s
/**
* qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
- * @ha: pointer to to HBA
+ * @ha: pointer to HBA
* @t: target id
* @l: lun id
*
Index: linux-2.6/drivers/staging/rt2860/rtmp.h
===================================================================
--- linux-2.6.orig/drivers/staging/rt2860/rtmp.h
+++ linux-2.6/drivers/staging/rt2860/rtmp.h
@@ -2080,7 +2080,7 @@ typedef struct _STA_ADMIN_CONFIG {
BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join.
BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join.
#endif
- // New for WPA, windows want us to to keep association information and
+ // New for WPA, windows want us to keep association information and
// Fixed IEs from last association response
NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
USHORT ReqVarIELen; // Length of next VIE include EID & Length
Index: linux-2.6/drivers/usb/serial/cypress_m8.h
===================================================================
--- linux-2.6.orig/drivers/usb/serial/cypress_m8.h
+++ linux-2.6/drivers/usb/serial/cypress_m8.h
@@ -57,7 +57,7 @@
#define UART_RI 0x10 /* ring indicator - modem - device to host */
#define UART_CD 0x40 /* carrier detect - modem - device to host */
#define CYP_ERROR 0x08 /* received from input report - device to host */
-/* Note - the below has nothing to to with the "feature report" reset */
+/* Note - the below has nothing to do with the "feature report" reset */
#define CONTROL_RESET 0x08 /* sent with output report - host to device */
/* End of RS-232 protocol definitions */
Index: linux-2.6/drivers/usb/serial/io_edgeport.c
===================================================================
--- linux-2.6.orig/drivers/usb/serial/io_edgeport.c
+++ linux-2.6/drivers/usb/serial/io_edgeport.c
@@ -2542,7 +2542,7 @@ static int calc_baud_rate_divisor(int ba
/*****************************************************************************
* send_cmd_write_uart_register
- * this function builds up a uart register message and sends to to the device.
+ * this function builds up a uart register message and sends to the device.
*****************************************************************************/
static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
__u8 regNum, __u8 regValue)
Index: linux-2.6/drivers/usb/serial/kl5kusb105.c
===================================================================
--- linux-2.6.orig/drivers/usb/serial/kl5kusb105.c
+++ linux-2.6/drivers/usb/serial/kl5kusb105.c
@@ -38,7 +38,7 @@
* 0.3a - implemented pools of write URBs
* 0.3 - alpha version for public testing
* 0.2 - TIOCMGET works, so autopilot(1) can be used!
- * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
+ * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
*
* The driver skeleton is mainly based on mct_u232.c and various other
* pieces of code shamelessly copied from the drivers/usb/serial/ directory.
Index: linux-2.6/fs/ext4/inode.c
===================================================================
--- linux-2.6.orig/fs/ext4/inode.c
+++ linux-2.6/fs/ext4/inode.c
@@ -2329,7 +2329,7 @@ static int __mpage_da_writepage(struct p
/*
* Rest of the page in the page_vec
* redirty then and skip then. We will
- * try to to write them again after
+ * try to write them again after
* starting a new transaction
*/
redirty_page_for_writepage(wbc, page);
Index: linux-2.6/fs/gfs2/rgrp.c
===================================================================
--- linux-2.6.orig/fs/gfs2/rgrp.c
+++ linux-2.6/fs/gfs2/rgrp.c
@@ -179,7 +179,7 @@ static inline u64 gfs2_bit_search(const
* always aligned to a 64 bit boundary.
*
* The size of the buffer is in bytes, but is it assumed that it is
- * always ok to to read a complete multiple of 64 bits at the end
+ * always ok to read a complete multiple of 64 bits at the end
* of the block in case the end is no aligned to a natural boundary.
*
* Return: the block number (bitmap buffer scope) that was found
Index: linux-2.6/fs/ntfs/layout.h
===================================================================
--- linux-2.6.orig/fs/ntfs/layout.h
+++ linux-2.6/fs/ntfs/layout.h
@@ -829,7 +829,7 @@ enum {
/* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the
F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask
- is used to to obtain all flags that are valid for setting. */
+ is used to obtain all flags that are valid for setting. */
/*
* The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all
* FILENAME_ATTR attributes but not in the STANDARD_INFORMATION
Index: linux-2.6/include/acpi/actypes.h
===================================================================
--- linux-2.6.orig/include/acpi/actypes.h
+++ linux-2.6/include/acpi/actypes.h
@@ -288,7 +288,7 @@ typedef u32 acpi_physical_address;
/*
* Some compilers complain about unused variables. Sometimes we don't want to
* use all the variables (for example, _acpi_module_name). This allows us
- * to to tell the compiler in a per-variable manner that a variable
+ * to tell the compiler in a per-variable manner that a variable
* is unused
*/
#ifndef ACPI_UNUSED_VAR
Index: linux-2.6/include/acpi/platform/acgcc.h
===================================================================
--- linux-2.6.orig/include/acpi/platform/acgcc.h
+++ linux-2.6/include/acpi/platform/acgcc.h
@@ -57,7 +57,7 @@
/*
* Some compilers complain about unused variables. Sometimes we don't want to
* use all the variables (for example, _acpi_module_name). This allows us
- * to to tell the compiler warning in a per-variable manner that a variable
+ * to tell the compiler warning in a per-variable manner that a variable
* is unused.
*/
#define ACPI_UNUSED_VAR __attribute__ ((unused))
Index: linux-2.6/include/rdma/ib_cm.h
===================================================================
--- linux-2.6.orig/include/rdma/ib_cm.h
+++ linux-2.6/include/rdma/ib_cm.h
@@ -482,7 +482,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_i
* message.
* @cm_id: Connection identifier associated with the connection message.
* @service_timeout: The lower 5-bits specify the maximum time required for
- * the sender to reply to to the connection message. The upper 3-bits
+ * the sender to reply to the connection message. The upper 3-bits
* specify additional control flags.
* @private_data: Optional user-defined private data sent with the
* message receipt acknowledgement.
Index: linux-2.6/kernel/tracepoint.c
===================================================================
--- linux-2.6.orig/kernel/tracepoint.c
+++ linux-2.6/kernel/tracepoint.c
@@ -47,7 +47,7 @@ static struct hlist_head tracepoint_tabl
/*
* Note about RCU :
- * It is used to to delay the free of multiple probes array until a quiescent
+ * It is used to delay the free of multiple probes array until a quiescent
* state is reached.
* Tracepoint entries modifications are protected by the tracepoints_mutex.
*/
Index: linux-2.6/lib/zlib_deflate/deflate.c
===================================================================
--- linux-2.6.orig/lib/zlib_deflate/deflate.c
+++ linux-2.6/lib/zlib_deflate/deflate.c
@@ -135,7 +135,7 @@ static const config configuration_table[
/* ===========================================================================
* Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * IN assertion: all calls to UPDATE_HASH are made with consecutive
* input characters, so that a running hash key can be computed from the
* previous key instead of complete recalculation each time.
*/
@@ -146,7 +146,7 @@ static const config configuration_table[
* Insert string str in the dictionary and set match_head to the previous head
* of the hash chain (the most recent string with same hash key). Return
* the previous length of the hash chain.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * IN assertion: all calls to INSERT_STRING are made with consecutive
* input characters and the first MIN_MATCH bytes of str are valid
* (except for the last MIN_MATCH-1 bytes of the input file).
*/
Index: linux-2.6/net/rxrpc/ar-call.c
===================================================================
--- linux-2.6.orig/net/rxrpc/ar-call.c
+++ linux-2.6/net/rxrpc/ar-call.c
@@ -96,7 +96,7 @@ static struct rxrpc_call *rxrpc_alloc_ca
}
/*
- * allocate a new client call and attempt to to get a connection slot for it
+ * allocate a new client call and attempt to get a connection slot for it
*/
static struct rxrpc_call *rxrpc_alloc_client_call(
struct rxrpc_sock *rx,
Index: linux-2.6/net/sched/sch_hfsc.c
===================================================================
--- linux-2.6.orig/net/sched/sch_hfsc.c
+++ linux-2.6/net/sched/sch_hfsc.c
@@ -77,7 +77,7 @@
* The service curve parameters are converted to the internal
* representation. The slope values are scaled to avoid overflow.
* the inverse slope values as well as the y-projection of the 1st
- * segment are kept in order to to avoid 64-bit divide operations
+ * segment are kept in order to avoid 64-bit divide operations
* that are expensive on 32-bit architectures.
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists