| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 15 Jul 2009 11:38:49 -0600
From: dougthompson@...ssion.com
To: bluesmoke-devel@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, akpm@...ux-foundation.org
Subject: [PATCH 2/4] edac: mpc85xx add mpc83xx support
Add support for the Freescale MPC83xx memory controller to the existing
driver for the Freescale MPC85xx memory controller. The only difference
between the two processors are in the CS_BNDS register parsing code, which
has been changed so it will work on both processors.
The L2 cache controller does not exist on the MPC83xx, but the OF subsystem
will not use the driver if the device is not present in the OF device tree.
Kumar, I had to change the nr_pages calculation to make the math work
out. I checked it on my board and did the math by hand for a 64GB 85xx
using 64K pages. In both cases, nr_pages * PAGE_SIZE comes out to the
correct value. Thanks for the help.
v1 -> v2:
* Use PAGE_SHIFT to parse cs_bnds regardless of board type
* Remove special-casing for the 83xx processor
Signed-off-by: Ira W. Snyder <iws@...o.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@...ssion.com>
---
drivers/edac/Kconfig | 6 +++---
drivers/edac/mpc85xx_edac.c | 28 +++++++++++++++++++---------
2 files changed, 22 insertions(+), 12 deletions(-)
Index: linux-2.6.31-rc3/drivers/edac/Kconfig
===================================================================
--- linux-2.6.31-rc3.orig/drivers/edac/Kconfig 2009-07-14 00:17:57.000000000 -0600
+++ linux-2.6.31-rc3/drivers/edac/Kconfig 2009-07-14 00:18:29.000000000 -0600
@@ -176,11 +176,11 @@ config EDAC_I5100
San Clemente MCH.
config EDAC_MPC85XX
- tristate "Freescale MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
+ tristate "Freescale MPC83xx / MPC85xx"
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
help
Support for error detection and correction on the Freescale
- MPC8560, MPC8540, MPC8548
+ MPC8349, MPC8560, MPC8540, MPC8548
config EDAC_MV64X60
tristate "Marvell MV64x60"
Index: linux-2.6.31-rc3/drivers/edac/mpc85xx_edac.c
===================================================================
--- linux-2.6.31-rc3.orig/drivers/edac/mpc85xx_edac.c 2009-07-14 00:18:03.000000000 -0600
+++ linux-2.6.31-rc3/drivers/edac/mpc85xx_edac.c 2009-07-14 00:19:22.000000000 -0600
@@ -41,7 +41,9 @@ static u32 orig_pci_err_en;
#endif
static u32 orig_l2_err_disable;
+#ifdef CONFIG_MPC85xx
static u32 orig_hid1[2];
+#endif
/************************ MC SYSFS parts ***********************************/
@@ -789,19 +791,20 @@ static void __devinit mpc85xx_init_csrow
csrow = &mci->csrows[index];
cs_bnds = in_be32(pdata->mc_vbase + MPC85XX_MC_CS_BNDS_0 +
(index * MPC85XX_MC_CS_BNDS_OFS));
- start = (cs_bnds & 0xfff0000) << 4;
- end = ((cs_bnds & 0xfff) << 20);
- if (start)
- start |= 0xfffff;
- if (end)
- end |= 0xfffff;
+
+ start = (cs_bnds & 0xffff0000) >> 16;
+ end = (cs_bnds & 0x0000ffff);
if (start == end)
continue; /* not populated */
+ start <<= (24 - PAGE_SHIFT);
+ end <<= (24 - PAGE_SHIFT);
+ end |= (1 << (24 - PAGE_SHIFT)) - 1;
+
csrow->first_page = start >> PAGE_SHIFT;
csrow->last_page = end >> PAGE_SHIFT;
- csrow->nr_pages = csrow->last_page + 1 - csrow->first_page;
+ csrow->nr_pages = end + 1 - start;
csrow->grain = 8;
csrow->mtype = mtype;
csrow->dtype = DEV_UNKNOWN;
@@ -985,6 +988,7 @@ static struct of_device_id mpc85xx_mc_er
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
+ { .compatible = "fsl,mpc8349-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", },
{},
};
@@ -1001,13 +1005,13 @@ static struct of_platform_driver mpc85xx
},
};
-
+#ifdef CONFIG_MPC85xx
static void __init mpc85xx_mc_clear_rfxe(void *data)
{
orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000));
}
-
+#endif
static int __init mpc85xx_mc_init(void)
{
@@ -1040,26 +1044,32 @@ static int __init mpc85xx_mc_init(void)
printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
#endif
+#ifdef CONFIG_MPC85xx
/*
* need to clear HID1[RFXE] to disable machine check int
* so we can catch it
*/
if (edac_op_state == EDAC_OPSTATE_INT)
on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+#endif
return 0;
}
module_init(mpc85xx_mc_init);
+#ifdef CONFIG_MPC85xx
static void __exit mpc85xx_mc_restore_hid1(void *data)
{
mtspr(SPRN_HID1, orig_hid1[smp_processor_id()]);
}
+#endif
static void __exit mpc85xx_mc_exit(void)
{
+#ifdef CONFIG_MPC85xx
on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+#endif
#ifdef CONFIG_PCI
of_unregister_platform_driver(&mpc85xx_pci_err_driver);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists