linux-kernel - Re: [PATCH 4/4] ds2760: handle full_active

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20090715200246.GJ9464@buzzloop.caiaq.de>
Date:	Wed, 15 Jul 2009 22:02:46 +0200
From:	Daniel Mack <daniel@...aq.de>
To:	Anton Vorontsov <avorontsov@...mvista.com>
Cc:	Andrew Morton <akpm@...ux-foundation.org>, mreimer@...p.net,
	linux-kernel@...r.kernel.org, szabolcs.gyurko@....hu, cbou@...l.ru
Subject: Re: [PATCH 4/4] ds2760: handle full_active_uAh == 0 case correctly

On Wed, Jul 15, 2009 at 11:28:33PM +0400, Anton Vorontsov wrote:
> On Wed, Jul 15, 2009 at 12:06:25PM -0700, Andrew Morton wrote:
> > Well.  I'll look at them, as I try to do when someone cc'ed me.  But
> > drivers/power is usually handled by Anton?
> 
> Yep. All patches look good, I'll apply them to battery-2.6.git.

Thanks. Please consider applying the one below as well if you're fine
with it. We need that parameter for bootstrapping in the factory when
devices are produced.

Thanks,
Daniel

>From 75b680d069596351da674023146f34b1737ea8ab Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@...aq.de>
Date: Wed, 15 Jul 2009 21:57:29 +0200
Subject: [PATCH] ds2760: add current_accum module parameter

When connecting a ds2760 to a partly loaded battery the first time,
there must be a way to bootstrap the current_accum value. Without that,
the current capactity value is bogus until the battery is fully charged
for the first time.

Signed-off-by: Daniel Mack <daniel@...aq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@....hu>
Cc: Matt Reimer <mreimer@...p.net>
Cc: Anton Vorontsov <cbou@...l.ru>
---
 drivers/power/ds2760_battery.c |   36 +++++++++++++++++++++++-------------
 1 files changed, 23 insertions(+), 13 deletions(-)

diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 2d0e5ed..606f074 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -70,6 +70,10 @@ static unsigned int rated_capacity;
 module_param(rated_capacity, uint, 0644);
 MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
 
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
 static int rated_capacities[] = {
@@ -215,6 +219,18 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	return 0;
 }
 
+static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
+					     unsigned int acr_val)
+{
+	unsigned char acr[2];
+
+	acr[0] = acr_val >> 8;
+	acr[1] = acr_val & 0xff;
+
+	if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+		dev_warn(di->dev, "ACR write failed\n");
+}
+
 static void ds2760_battery_update_status(struct ds2760_device_info *di)
 {
 	int old_charge_status = di->charge_status;
@@ -246,20 +262,9 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)
 			if (di->full_counter < 2) {
 				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
 			} else {
-				unsigned char acr[2];
-				int acr_val;
-
 				/* acr is in units of 0.25 mAh */
-				acr_val = di->full_active_uAh * 4L / 1000;
-
-				acr[0] = acr_val >> 8;
-				acr[1] = acr_val & 0xff;
-
-				if (w1_ds2760_write(di->w1_dev, acr,
-				    DS2760_CURRENT_ACCUM_MSB, 2) < 2)
-					dev_warn(di->dev,
-						 "ACR reset failed\n");
-
+				int acr_val = di->full_active_uAh * 4L / 1000;
+				ds2760_battery_set_current_accum(di, acr_val);
 				di->charge_status = POWER_SUPPLY_STATUS_FULL;
 			}
 		}
@@ -423,6 +428,11 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	if (rated_capacity)
 		ds2760_battery_write_rated_capacity(di, rated_capacity);
 
+	/* set current accumulator if given as parameter.
+	 * this should only be done for bootstrapping the value */
+	if (current_accum)
+		ds2760_battery_set_current_accum(di, current_accum);
+
 	retval = power_supply_register(&pdev->dev, &di->bat);
 	if (retval) {
 		dev_err(di->dev, "failed to register battery\n");
-- 
1.6.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/